Best Miter Saw Accessories. Rockwell brand. New releases 2021

Rockwell RK7323 BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge & 7 Accessories

More from Tools & Home Improvement
Search only Rockwell brand name
Rockwell RK7323 BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge & 7 Accessories

Current price: 139 USD


Check price and availability


Height: 8.3 Inches

Length: 16.1 Inches

Width: 17.5 Inches

Weight: 15 Pounds

Warranty: 3 year Limited Consumer Warranty

  • [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle

More Info

Rockwell JawHorse Portable Material Support Station – RK9003, Black and green

More from Tools & Home Improvement
Search only Rockwell brand name
Rockwell JawHorse Portable Material Support Station – RK9003, Black and green

Current price: 199.99 USD


Check price and availability


Height: 15.4 Inches

Length: 33.1 Inches

Width: 15 Inches

Weight: 46.1 Pounds

Warranty: 2 Year Positec

  • [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
  • Weighs 43 lbs
  • Quickly folds down with no tools
  • Tripod base for stability
  • Jaws extend a full 37-Inch
  • Hands-free clamping and foot-pedal operated for up to 1-ton clamping force
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on uneven ground than four legs would
  • [NO MAR PADS] Made from urethane, so they grip the material without leaving any marks, perfect for premium woodworking projects
  • [1 TON OF CLAMPING FORCE] 2200 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot
  • [CAN HOLD A STANDARD 36” DOOR] With up to 37” of clamping range and a 3/8” per step clamping method
  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools

More Info

Rockwell RK9034 JawStand XP Work Support Stand

More from Tools & Home Improvement
Search only Rockwell brand name
Rockwell RK9034 JawStand XP Work Support Stand

Current price: 109.99 USD


Check price and availability


Height: 33.1 Inches

Length: 14 Inches

Width: 8 Inches

  • [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
  • Weighs 43 lbs
  • Quickly folds down with no tools
  • Tripod base for stability
  • Jaws extend a full 37-Inch
  • Hands-free clamping and foot-pedal operated for up to 1-ton clamping force
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on uneven ground than four legs would
  • [NO MAR PADS] Made from urethane, so they grip the material without leaving any marks, perfect for premium woodworking projects
  • [1 TON OF CLAMPING FORCE] 2200 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot
  • [CAN HOLD A STANDARD 36” DOOR] With up to 37” of clamping range and a 3/8” per step clamping method
  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools
  • [BUBBLE LEVEL] Built right in for easy leveling so when you’re installing a hanging bookshelf you’ll know when it’s just right
  • [SWIVELING & TILTING HEAD CLAMPS] Goes from 0-90° so you can place the project in the exact orientation you like it while working on it
  • [LOW FRICTION SURFACE] When you’re ready to release the project just unclamp it and it will slide out smoothly
  • [TRIPOD BASE] With no-slip/no-mar feet that will stay in place on uneven ground, even under a heavy load
  • [RUBBER GRIP SURFACES] Holds the project securely in place without marking up or damaging the material
  • [MICRO HEIGHT ADJUSTMENT KNOB] allows you to place the project precisely where it needs to be so you can fasten it to the wall

More Info

Rockwell RW9266 BladeRunner X2 Cross Cut Sled

More from Tools & Home Improvement
Search only Rockwell brand name
Rockwell RW9266 BladeRunner X2 Cross Cut Sled

Current price: 25.2 USD

Saving: $4.79 (16%)


Check price and availability


Height: 2.5 Inches

Length: 17.25 Inches

Width: 12.5 Inches

Weight: 0.44 Pounds

  • [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
  • Weighs 43 lbs
  • Quickly folds down with no tools
  • Tripod base for stability
  • Jaws extend a full 37-Inch
  • Hands-free clamping and foot-pedal operated for up to 1-ton clamping force
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on uneven ground than four legs would
  • [NO MAR PADS] Made from urethane, so they grip the material without leaving any marks, perfect for premium woodworking projects
  • [1 TON OF CLAMPING FORCE] 2200 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot
  • [CAN HOLD A STANDARD 36” DOOR] With up to 37” of clamping range and a 3/8” per step clamping method
  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools
  • [BUBBLE LEVEL] Built right in for easy leveling so when you’re installing a hanging bookshelf you’ll know when it’s just right
  • [SWIVELING & TILTING HEAD CLAMPS] Goes from 0-90° so you can place the project in the exact orientation you like it while working on it
  • [LOW FRICTION SURFACE] When you’re ready to release the project just unclamp it and it will slide out smoothly
  • [TRIPOD BASE] With no-slip/no-mar feet that will stay in place on uneven ground, even under a heavy load
  • [RUBBER GRIP SURFACES] Holds the project securely in place without marking up or damaging the material
  • [MICRO HEIGHT ADJUSTMENT KNOB] allows you to place the project precisely where it needs to be so you can fasten it to the wall
  • Helps produce 90-degree cross cuts
  • Room to place your hands safely during your cuts
  • Cutting groove for easy alignment
  • Ideal for precise cross cutting applications

More Info

Rockwell RK9002 JawHorse Sheetmaster Portable Workstation

More from Tools & Home Improvement
Search only Rockwell brand name
Rockwell RK9002 JawHorse Sheetmaster Portable Workstation

Current price: 299.99 USD


Check price and availability


Weight: 53 Pounds

Warranty: Limited 2-year

  • [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
  • Weighs 43 lbs
  • Quickly folds down with no tools
  • Tripod base for stability
  • Jaws extend a full 37-Inch
  • Hands-free clamping and foot-pedal operated for up to 1-ton clamping force
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on uneven ground than four legs would
  • [NO MAR PADS] Made from urethane, so they grip the material without leaving any marks, perfect for premium woodworking projects
  • [1 TON OF CLAMPING FORCE] 2200 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot
  • [CAN HOLD A STANDARD 36” DOOR] With up to 37” of clamping range and a 3/8” per step clamping method
  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools
  • [BUBBLE LEVEL] Built right in for easy leveling so when you’re installing a hanging bookshelf you’ll know when it’s just right
  • [SWIVELING & TILTING HEAD CLAMPS] Goes from 0-90° so you can place the project in the exact orientation you like it while working on it
  • [LOW FRICTION SURFACE] When you’re ready to release the project just unclamp it and it will slide out smoothly
  • [TRIPOD BASE] With no-slip/no-mar feet that will stay in place on uneven ground, even under a heavy load
  • [RUBBER GRIP SURFACES] Holds the project securely in place without marking up or damaging the material
  • [MICRO HEIGHT ADJUSTMENT KNOB] allows you to place the project precisely where it needs to be so you can fasten it to the wall
  • Helps produce 90-degree cross cuts
  • Room to place your hands safely during your cuts
  • Cutting groove for easy alignment
  • Ideal for precise cross cutting applications
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on un-even ground than four legs would
  • [NO MAR PADS] Made from urethane so they grip the material without leaving any marks, perfect for premium woodworking projects
  • [1 TON OF CLAMPING FORCE] 2000 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot
  • [HOLDS A FULL SHEET OF PLYWOOD] With up to 49” of clamping range and a 3/8” per step clamping method
  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools

More Info

Rockwell JawStand Portable Work Support Stand with Clamping, Rotating, and Low-Friction Features – RK9033

More from Tools & Home Improvement
Search only Rockwell brand name
Rockwell JawStand Portable Work Support Stand with Clamping, Rotating, and Low-Friction Features – RK9033

Current price: 158.45 USD


Check price and availability


Height: 40.5 Inches

Length: 7.75 Inches

Width: 10.25 Inches

Warranty: Limited 2-year

  • [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
  • Weighs 43 lbs
  • Quickly folds down with no tools
  • Tripod base for stability
  • Jaws extend a full 37-Inch
  • Hands-free clamping and foot-pedal operated for up to 1-ton clamping force
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on uneven ground than four legs would
  • [NO MAR PADS] Made from urethane, so they grip the material without leaving any marks, perfect for premium woodworking projects
  • [1 TON OF CLAMPING FORCE] 2200 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot
  • [CAN HOLD A STANDARD 36” DOOR] With up to 37” of clamping range and a 3/8” per step clamping method
  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools
  • [BUBBLE LEVEL] Built right in for easy leveling so when you’re installing a hanging bookshelf you’ll know when it’s just right
  • [SWIVELING & TILTING HEAD CLAMPS] Goes from 0-90° so you can place the project in the exact orientation you like it while working on it
  • [LOW FRICTION SURFACE] When you’re ready to release the project just unclamp it and it will slide out smoothly
  • [TRIPOD BASE] With no-slip/no-mar feet that will stay in place on uneven ground, even under a heavy load
  • [RUBBER GRIP SURFACES] Holds the project securely in place without marking up or damaging the material
  • [MICRO HEIGHT ADJUSTMENT KNOB] allows you to place the project precisely where it needs to be so you can fasten it to the wall
  • Helps produce 90-degree cross cuts
  • Room to place your hands safely during your cuts
  • Cutting groove for easy alignment
  • Ideal for precise cross cutting applications
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on un-even ground than four legs would
  • [NO MAR PADS] Made from urethane so they grip the material without leaving any marks, perfect for premium woodworking projects
  • [1 TON OF CLAMPING FORCE] 2000 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot
  • [HOLDS A FULL SHEET OF PLYWOOD] With up to 49” of clamping range and a 3/8” per step clamping method
  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools
  • Come with manufacturer’s 3-year warranty
  • Rotating head with bubble for slanted and level hold measurements
  • Clamps and holds up to 220 pounds, is portable and foldable, at 13 lbs. to take anywhere
  • Provides hobbyists low-friction, feeding support with less cutting deviation over long materials
  • Provides the second set of hands you need for big repairs, around the shop, and just about anywhere else. It will support most doors and cabinets in the air

More Info

Rockwell RK3441K 4-1/2” Compact Circular Saw with Dust Port and Accessory Kit with Rockwell RK5151K Sonicrafter F80 Oscillating Multi-Tool

More from Tools & Home Improvement
Search only Rockwell brand name
Rockwell RK3441K 4-1/2” Compact Circular Saw with Dust Port and Accessory Kit with Rockwell RK5151K Sonicrafter F80 Oscillating Multi-Tool

Current price: 208.43 USD

Saving: $51.55 (20%)


Check price and availability


  • [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
  • Weighs 43 lbs
  • Quickly folds down with no tools
  • Tripod base for stability
  • Jaws extend a full 37-Inch
  • Hands-free clamping and foot-pedal operated for up to 1-ton clamping force
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on uneven ground than four legs would
  • [NO MAR PADS] Made from urethane, so they grip the material without leaving any marks, perfect for premium woodworking projects
  • [1 TON OF CLAMPING FORCE] 2200 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot
  • [CAN HOLD A STANDARD 36” DOOR] With up to 37” of clamping range and a 3/8” per step clamping method
  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools
  • [BUBBLE LEVEL] Built right in for easy leveling so when you’re installing a hanging bookshelf you’ll know when it’s just right
  • [SWIVELING & TILTING HEAD CLAMPS] Goes from 0-90° so you can place the project in the exact orientation you like it while working on it
  • [LOW FRICTION SURFACE] When you’re ready to release the project just unclamp it and it will slide out smoothly
  • [TRIPOD BASE] With no-slip/no-mar feet that will stay in place on uneven ground, even under a heavy load
  • [RUBBER GRIP SURFACES] Holds the project securely in place without marking up or damaging the material
  • [MICRO HEIGHT ADJUSTMENT KNOB] allows you to place the project precisely where it needs to be so you can fasten it to the wall
  • Helps produce 90-degree cross cuts
  • Room to place your hands safely during your cuts
  • Cutting groove for easy alignment
  • Ideal for precise cross cutting applications
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on un-even ground than four legs would
  • [NO MAR PADS] Made from urethane so they grip the material without leaving any marks, perfect for premium woodworking projects
  • [1 TON OF CLAMPING FORCE] 2000 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot
  • [HOLDS A FULL SHEET OF PLYWOOD] With up to 49” of clamping range and a 3/8” per step clamping method
  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools
  • Come with manufacturer’s 3-year warranty
  • Rotating head with bubble for slanted and level hold measurements
  • Clamps and holds up to 220 pounds, is portable and foldable, at 13 lbs. to take anywhere
  • Provides hobbyists low-friction, feeding support with less cutting deviation over long materials
  • Provides the second set of hands you need for big repairs, around the shop, and just about anywhere else. It will support most doors and cabinets in the air
  • Powerful 4.2 Amp motor delivers constant speed and won’t stall under heavy loads
  • Variable speed dial for precision control – from 10,000 to 19,000 oscillations per minute
  • Duotech oscillation technology lets you select the optimum oscillation angle for power and precision
  • Left-handed blade design provides remarkable cut-line visibility
  • At only 5 lbs., is 50% lighter than conventional 7-1/4” circular saws, cuts through 2x4s in a single pass
  • Compact but powerful 5-amp electric motor, matching performance of full-size saws at 3,500 rpm

More Info

Rockwell RK5151K 4.2 Amp Sonicrafter F80 Oscillating Multi-Tool with Duotech Oscillation Angle Technology. 12 Piece Kit includes 10 Accessories, Carrying Bag, and Oscillating Tool

More from Tools & Home Improvement
Search only Rockwell brand name
Rockwell RK5151K 4.2 Amp Sonicrafter F80 Oscillating Multi-Tool with Duotech Oscillation Angle Technology. 12 Piece Kit includes 10 Accessories, Carrying Bag, and Oscillating Tool

Current price: 105 USD

Saving: $54.99 (34%)


Check price and availability


Height: 4 Inches

Length: 11.6 Inches

Width: 3.5 Inches

Weight: 4 Pounds

Warranty: Comes with 3-year Manufacturer’s Warranty

  • [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
  • Weighs 43 lbs
  • Quickly folds down with no tools
  • Tripod base for stability
  • Jaws extend a full 37-Inch
  • Hands-free clamping and foot-pedal operated for up to 1-ton clamping force
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on uneven ground than four legs would
  • [NO MAR PADS] Made from urethane, so they grip the material without leaving any marks, perfect for premium woodworking projects
  • [1 TON OF CLAMPING FORCE] 2200 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot
  • [CAN HOLD A STANDARD 36” DOOR] With up to 37” of clamping range and a 3/8” per step clamping method
  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools
  • [BUBBLE LEVEL] Built right in for easy leveling so when you’re installing a hanging bookshelf you’ll know when it’s just right
  • [SWIVELING & TILTING HEAD CLAMPS] Goes from 0-90° so you can place the project in the exact orientation you like it while working on it
  • [LOW FRICTION SURFACE] When you’re ready to release the project just unclamp it and it will slide out smoothly
  • [TRIPOD BASE] With no-slip/no-mar feet that will stay in place on uneven ground, even under a heavy load
  • [RUBBER GRIP SURFACES] Holds the project securely in place without marking up or damaging the material
  • [MICRO HEIGHT ADJUSTMENT KNOB] allows you to place the project precisely where it needs to be so you can fasten it to the wall
  • Helps produce 90-degree cross cuts
  • Room to place your hands safely during your cuts
  • Cutting groove for easy alignment
  • Ideal for precise cross cutting applications
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on un-even ground than four legs would
  • [NO MAR PADS] Made from urethane so they grip the material without leaving any marks, perfect for premium woodworking projects
  • [1 TON OF CLAMPING FORCE] 2000 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot
  • [HOLDS A FULL SHEET OF PLYWOOD] With up to 49” of clamping range and a 3/8” per step clamping method
  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools
  • Come with manufacturer’s 3-year warranty
  • Rotating head with bubble for slanted and level hold measurements
  • Clamps and holds up to 220 pounds, is portable and foldable, at 13 lbs. to take anywhere
  • Provides hobbyists low-friction, feeding support with less cutting deviation over long materials
  • Provides the second set of hands you need for big repairs, around the shop, and just about anywhere else. It will support most doors and cabinets in the air
  • Powerful 4.2 Amp motor delivers constant speed and won’t stall under heavy loads
  • Variable speed dial for precision control – from 10,000 to 19,000 oscillations per minute
  • Duotech oscillation technology lets you select the optimum oscillation angle for power and precision
  • Left-handed blade design provides remarkable cut-line visibility
  • At only 5 lbs., is 50% lighter than conventional 7-1/4” circular saws, cuts through 2x4s in a single pass
  • Compact but powerful 5-amp electric motor, matching performance of full-size saws at 3,500 rpm
  • [POWERFUL 4.2-AMP MOTOR] Won’t stall under heavy loads, providing consistent power over the lifetime of the tool
  • [2-SPEED GEARING] Depending on the job or the material you can switch from 10,000 oscillations/min to 19,000, so you can do the job right
  • [LED WORKLIGHT] Multitools like this are great for getting into tight spaces that full-size saws can’t get into. Now you can see what you’re doing when you get in there
  • [UNIVERSAL FIT] Accepts all major brand’s blades, sanders, and accessories for your convenience—but this kit comes with 10 blades, pads and sanders to get you started
  • [1 TON OF CLAMPING FORCE] The tool-free Hyperlock blade change system prevents slippage while operating, no matter the angle, no matter the speed
  • [POWER & PRECISION] Up to 19,000 oscillations per minute with 2 angles of attack: 5° for more power, 3.4° for more control on detail work

More Info

Rockwell Oscillating Multi-Tool 12 Piece Kit includes 10 Accessories, Carrying Bag, and Oscillating Tool with Oscillating Multitool Rigid Scraper Blade

More from Tools & Home Improvement
Search only Rockwell brand name
Rockwell Oscillating Multi-Tool 12 Piece Kit includes 10 Accessories, Carrying Bag, and Oscillating Tool with Oscillating Multitool Rigid Scraper Blade

Current price: 127.98 USD

Saving: $43.00 (25%)


Check price and availability


  • [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
  • Weighs 43 lbs
  • Quickly folds down with no tools
  • Tripod base for stability
  • Jaws extend a full 37-Inch
  • Hands-free clamping and foot-pedal operated for up to 1-ton clamping force
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on uneven ground than four legs would
  • [NO MAR PADS] Made from urethane, so they grip the material without leaving any marks, perfect for premium woodworking projects
  • [1 TON OF CLAMPING FORCE] 2200 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot
  • [CAN HOLD A STANDARD 36” DOOR] With up to 37” of clamping range and a 3/8” per step clamping method
  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools
  • [BUBBLE LEVEL] Built right in for easy leveling so when you’re installing a hanging bookshelf you’ll know when it’s just right
  • [SWIVELING & TILTING HEAD CLAMPS] Goes from 0-90° so you can place the project in the exact orientation you like it while working on it
  • [LOW FRICTION SURFACE] When you’re ready to release the project just unclamp it and it will slide out smoothly
  • [TRIPOD BASE] With no-slip/no-mar feet that will stay in place on uneven ground, even under a heavy load
  • [RUBBER GRIP SURFACES] Holds the project securely in place without marking up or damaging the material
  • [MICRO HEIGHT ADJUSTMENT KNOB] allows you to place the project precisely where it needs to be so you can fasten it to the wall
  • Helps produce 90-degree cross cuts
  • Room to place your hands safely during your cuts
  • Cutting groove for easy alignment
  • Ideal for precise cross cutting applications
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on un-even ground than four legs would
  • [NO MAR PADS] Made from urethane so they grip the material without leaving any marks, perfect for premium woodworking projects
  • [1 TON OF CLAMPING FORCE] 2000 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot
  • [HOLDS A FULL SHEET OF PLYWOOD] With up to 49” of clamping range and a 3/8” per step clamping method
  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools
  • Come with manufacturer’s 3-year warranty
  • Rotating head with bubble for slanted and level hold measurements
  • Clamps and holds up to 220 pounds, is portable and foldable, at 13 lbs. to take anywhere
  • Provides hobbyists low-friction, feeding support with less cutting deviation over long materials
  • Provides the second set of hands you need for big repairs, around the shop, and just about anywhere else. It will support most doors and cabinets in the air
  • Powerful 4.2 Amp motor delivers constant speed and won’t stall under heavy loads
  • Variable speed dial for precision control – from 10,000 to 19,000 oscillations per minute
  • Duotech oscillation technology lets you select the optimum oscillation angle for power and precision
  • Left-handed blade design provides remarkable cut-line visibility
  • At only 5 lbs., is 50% lighter than conventional 7-1/4” circular saws, cuts through 2x4s in a single pass
  • Compact but powerful 5-amp electric motor, matching performance of full-size saws at 3,500 rpm
  • [POWERFUL 4.2-AMP MOTOR] Won’t stall under heavy loads, providing consistent power over the lifetime of the tool
  • [2-SPEED GEARING] Depending on the job or the material you can switch from 10,000 oscillations/min to 19,000, so you can do the job right
  • [LED WORKLIGHT] Multitools like this are great for getting into tight spaces that full-size saws can’t get into. Now you can see what you’re doing when you get in there
  • [UNIVERSAL FIT] Accepts all major brand’s blades, sanders, and accessories for your convenience—but this kit comes with 10 blades, pads and sanders to get you started
  • [1 TON OF CLAMPING FORCE] The tool-free Hyperlock blade change system prevents slippage while operating, no matter the angle, no matter the speed
  • [POWER & PRECISION] Up to 19,000 oscillations per minute with 2 angles of attack: 5° for more power, 3.4° for more control on detail work
  • Scrape residue from glues and adhesives
  • Remove old paint, hardened adhesives, caulk, and cut carpet
  • Variable speed dial for precision control – from 10,000 to 19,000 oscillations per minute
  • Duotech oscillation technology lets you select the optimum oscillation angle for power and precision

More Info

Rockwell BladeRunner X2 Portable Tabletop Saw, RK7323 & WORX Pegasus Multi-Function Work Table and Sawhorse with Quick Clamps and Holding Pegs – WX051

More from Tools & Home Improvement
Search only Rockwell brand name
Rockwell BladeRunner X2 Portable Tabletop Saw, RK7323 & WORX Pegasus Multi-Function Work Table and Sawhorse with Quick Clamps and Holding Pegs – WX051

Current price: 278 USD


Check price and availability


Weight: 25 Pounds

  • [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
  • Weighs 43 lbs
  • Quickly folds down with no tools
  • Tripod base for stability
  • Jaws extend a full 37-Inch
  • Hands-free clamping and foot-pedal operated for up to 1-ton clamping force
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on uneven ground than four legs would
  • [NO MAR PADS] Made from urethane, so they grip the material without leaving any marks, perfect for premium woodworking projects
  • [1 TON OF CLAMPING FORCE] 2200 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot
  • [CAN HOLD A STANDARD 36” DOOR] With up to 37” of clamping range and a 3/8” per step clamping method
  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools
  • [BUBBLE LEVEL] Built right in for easy leveling so when you’re installing a hanging bookshelf you’ll know when it’s just right
  • [SWIVELING & TILTING HEAD CLAMPS] Goes from 0-90° so you can place the project in the exact orientation you like it while working on it
  • [LOW FRICTION SURFACE] When you’re ready to release the project just unclamp it and it will slide out smoothly
  • [TRIPOD BASE] With no-slip/no-mar feet that will stay in place on uneven ground, even under a heavy load
  • [RUBBER GRIP SURFACES] Holds the project securely in place without marking up or damaging the material
  • [MICRO HEIGHT ADJUSTMENT KNOB] allows you to place the project precisely where it needs to be so you can fasten it to the wall
  • Helps produce 90-degree cross cuts
  • Room to place your hands safely during your cuts
  • Cutting groove for easy alignment
  • Ideal for precise cross cutting applications
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on un-even ground than four legs would
  • [NO MAR PADS] Made from urethane so they grip the material without leaving any marks, perfect for premium woodworking projects
  • [1 TON OF CLAMPING FORCE] 2000 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot
  • [HOLDS A FULL SHEET OF PLYWOOD] With up to 49” of clamping range and a 3/8” per step clamping method
  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools
  • Come with manufacturer’s 3-year warranty
  • Rotating head with bubble for slanted and level hold measurements
  • Clamps and holds up to 220 pounds, is portable and foldable, at 13 lbs. to take anywhere
  • Provides hobbyists low-friction, feeding support with less cutting deviation over long materials
  • Provides the second set of hands you need for big repairs, around the shop, and just about anywhere else. It will support most doors and cabinets in the air
  • Powerful 4.2 Amp motor delivers constant speed and won’t stall under heavy loads
  • Variable speed dial for precision control – from 10,000 to 19,000 oscillations per minute
  • Duotech oscillation technology lets you select the optimum oscillation angle for power and precision
  • Left-handed blade design provides remarkable cut-line visibility
  • At only 5 lbs., is 50% lighter than conventional 7-1/4” circular saws, cuts through 2x4s in a single pass
  • Compact but powerful 5-amp electric motor, matching performance of full-size saws at 3,500 rpm
  • [POWERFUL 4.2-AMP MOTOR] Won’t stall under heavy loads, providing consistent power over the lifetime of the tool
  • [2-SPEED GEARING] Depending on the job or the material you can switch from 10,000 oscillations/min to 19,000, so you can do the job right
  • [LED WORKLIGHT] Multitools like this are great for getting into tight spaces that full-size saws can’t get into. Now you can see what you’re doing when you get in there
  • [UNIVERSAL FIT] Accepts all major brand’s blades, sanders, and accessories for your convenience—but this kit comes with 10 blades, pads and sanders to get you started
  • [1 TON OF CLAMPING FORCE] The tool-free Hyperlock blade change system prevents slippage while operating, no matter the angle, no matter the speed
  • [POWER & PRECISION] Up to 19,000 oscillations per minute with 2 angles of attack: 5° for more power, 3.4° for more control on detail work
  • Scrape residue from glues and adhesives
  • Remove old paint, hardened adhesives, caulk, and cut carpet
  • Variable speed dial for precision control – from 10,000 to 19,000 oscillations per minute
  • Duotech oscillation technology lets you select the optimum oscillation angle for power and precision
  • Product 2: [CONNECT MULTIPLE TABLES] Create a whole work counter when you link 3 or more Pegasus’ together. Whether your worksite or workshop is spacious or tight, this building solution expands or contracts to fit your needs
  • Product 2: [LIGHT AND STURDY] It’s only 25 lbs., and its foldable design makes it easy to move and store
  • Product 2: [CUSTOM CLAMPS] Two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer
  • Product 2: [WORKTABLE & SAWHORSE] Holds up to 300 lbs. as a work table, supports 1,000 lbs. as a sawhorse. And it’s easy to transition between the two
  • Product 1: [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
  • Product 1: [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
  • Product 1: [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
  • Product 1: [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle

More Info

1    2