Best Masonry Drill Bits. Makita brand. New releases 2021

Makita B-68890 3/4" x 6" Carbide Tipped Percussion Masonry Hammer Drill Bit

More from Tools & Home Improvement
Search only Makita brand name
Makita B-68890 3/4

Current price: 12.08 USD

Saving: $1.32 (10%)


Check price and availability


Height: 9.84 Inches

Length: 0.79 Inches

Width: 1.73 Inches

  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life

More Info

Makita 5 Piece - SDS-Plus Drill Bit Set For SDS+ Rotary Hammers - Aggressive Drilling For Concrete & Masonry - Carbide Tipped Bits

More from Tools & Home Improvement
Search only Makita brand name
Makita 5 Piece - SDS-Plus Drill Bit Set For SDS+ Rotary Hammers - Aggressive Drilling For Concrete & Masonry - Carbide Tipped Bits

Current price: 22.99 USD


Check price and availability


Height: 3 Inches

Length: 7.25 Inches

Width: 0.75 Inches

  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life
  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block

More Info

Makita B-60872 3/16" x 6" SDS-Plus Bit, 2-Cutter, 10/Pk

More from Tools & Home Improvement
Search only Makita brand name
Makita B-60872 3/16

Current price: 37.21 USD


Check price and availability


Height: 0.928 Inches

Length: 1.58 Inches

Width: 1.58 Inches

Weight: 0.918 Pounds

  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life
  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • Engineered for reduced vibration
  • Aggressive head geometry in primary cutter engineered for use in concrete
  • Central guiding action engineered for more accurate holes
  • Centering tip features a more aggressive design for faster hole starting
  • Self-centering Carbide tip

More Info

Makita 5 Pack - SDS-Plus 5/32” Drill Bits for SDS+ Rotary Hammers - 4" Deep Drilling Into Concrete & Masonry

More from Tools & Home Improvement
Search only Makita brand name
Makita 5 Pack - SDS-Plus 5/32” Drill Bits for SDS+ Rotary Hammers - 4

Current price: 17.99 USD


Check price and availability


Height: 3 Inches

Length: 7.25 Inches

Width: 0.75 Inches

  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life
  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • Engineered for reduced vibration
  • Aggressive head geometry in primary cutter engineered for use in concrete
  • Central guiding action engineered for more accurate holes
  • Centering tip features a more aggressive design for faster hole starting
  • Self-centering Carbide tip
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ Five 5/32" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 4" Deep Drilling Depths
  • ✅ MAKITA’S 5 Pack 5/32” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 5 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 4” into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block

More Info

Makita 3 Piece - SDS-Plus Long Drill Bit Set for SDS+ Rotary Hammers - Deep HD Drilling for Concrete & Masonry - Carbide Tipped Bits

More from Tools & Home Improvement
Search only Makita brand name
Makita 3 Piece - SDS-Plus Long Drill Bit Set for SDS+ Rotary Hammers - Deep HD Drilling for Concrete & Masonry - Carbide Tipped Bits

Current price: 29.99 USD


Check price and availability


Height: 3 Inches

Length: 13 Inches

Width: 0.75 Inches

Weight: 0.71 Pounds

  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life
  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • Engineered for reduced vibration
  • Aggressive head geometry in primary cutter engineered for use in concrete
  • Central guiding action engineered for more accurate holes
  • Centering tip features a more aggressive design for faster hole starting
  • Self-centering Carbide tip
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ Five 5/32" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 4" Deep Drilling Depths
  • ✅ MAKITA’S 5 Pack 5/32” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 5 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 4” into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ IDEAL for General Contractors & Construction Industry that require an extra long flute size SDS-Plus bits for DEEPER anchoring lengths and DEEPER holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All standard SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single, One-Piece Bit design are heat forged for STRENGTH and LONGEVITY with a sharp edge Carbide Tip design for maximum impact on masonry/concrete material, allowing for effective and precise drilling
  • ✅ EASILY DRILL into deep concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s Reinforced Premium Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE & SAFE Drilling | The proprietary drill bit flute design allows for maximal concrete removal for both EASE OF USE and EFFECTIVENESS
  • ✅ 3 EXTRA-LONG MAKITA DRILL BIT Set Includes: 1 Bit of (1/2" x 12") with a 10" Maximum drilling depth + 1 Bit of (5/8" x 12") with a 10" Maximum drilling depth + 1 Bit of (1" x 10") with a 8" Maximum drilling depth
  • ✅ MAKITA’S SDS-Plus DEEP Drill Bit Set for SDS+ Rotary Hammers with 3 Extra-Long & Thick, Premium, Heavy-Duty, Tungsten Carbide Drill BITS of 1/2", 5/8", & 1" diameter for SMOOTH & RELIABLE Drilling into 8-10" Reinforced Concrete, Tile, Brick & Cinder Block applications

More Info

Makita B-61195 3/16" x 8" SDS-Plus Bit, 3-Cutter, 10/Pk

More from Tools & Home Improvement
Search only Makita brand name
Makita B-61195 3/16

Current price: 53.72 USD


Check price and availability


Height: 1.045 Inches

Length: 1.58 Inches

Width: 1.58 Inches

Weight: 1.035 Pounds

  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life
  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • Engineered for reduced vibration
  • Aggressive head geometry in primary cutter engineered for use in concrete
  • Central guiding action engineered for more accurate holes
  • Centering tip features a more aggressive design for faster hole starting
  • Self-centering Carbide tip
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ Five 5/32" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 4" Deep Drilling Depths
  • ✅ MAKITA’S 5 Pack 5/32” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 5 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 4” into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ IDEAL for General Contractors & Construction Industry that require an extra long flute size SDS-Plus bits for DEEPER anchoring lengths and DEEPER holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All standard SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single, One-Piece Bit design are heat forged for STRENGTH and LONGEVITY with a sharp edge Carbide Tip design for maximum impact on masonry/concrete material, allowing for effective and precise drilling
  • ✅ EASILY DRILL into deep concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s Reinforced Premium Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE & SAFE Drilling | The proprietary drill bit flute design allows for maximal concrete removal for both EASE OF USE and EFFECTIVENESS
  • ✅ 3 EXTRA-LONG MAKITA DRILL BIT Set Includes: 1 Bit of (1/2" x 12") with a 10" Maximum drilling depth + 1 Bit of (5/8" x 12") with a 10" Maximum drilling depth + 1 Bit of (1" x 10") with a 8" Maximum drilling depth
  • ✅ MAKITA’S SDS-Plus DEEP Drill Bit Set for SDS+ Rotary Hammers with 3 Extra-Long & Thick, Premium, Heavy-Duty, Tungsten Carbide Drill BITS of 1/2", 5/8", & 1" diameter for SMOOTH & RELIABLE Drilling into 8-10" Reinforced Concrete, Tile, Brick & Cinder Block applications
  • Engineered for reduced vibration
  • Aggressive head geometry in primary cutter engineered for use in concrete
  • Central guiding action engineered for more accurate holes
  • Centering tip features a more aggressive design for faster hole starting
  • 3-Cutter bit tip is engineered for drilling in reinforced concrete

More Info

Makita B-68731 3/16" x 3-1/2" Carbide Tipped Percussion Masonry Hammer Drill Bit

More from Tools & Home Improvement
Search only Makita brand name
Makita B-68731 3/16

Current price: 2.52 USD


Check price and availability


Height: 7.87 Inches

Length: 0.24 Inches

Width: 1.73 Inches

  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life
  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • Engineered for reduced vibration
  • Aggressive head geometry in primary cutter engineered for use in concrete
  • Central guiding action engineered for more accurate holes
  • Centering tip features a more aggressive design for faster hole starting
  • Self-centering Carbide tip
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ Five 5/32" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 4" Deep Drilling Depths
  • ✅ MAKITA’S 5 Pack 5/32” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 5 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 4” into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ IDEAL for General Contractors & Construction Industry that require an extra long flute size SDS-Plus bits for DEEPER anchoring lengths and DEEPER holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All standard SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single, One-Piece Bit design are heat forged for STRENGTH and LONGEVITY with a sharp edge Carbide Tip design for maximum impact on masonry/concrete material, allowing for effective and precise drilling
  • ✅ EASILY DRILL into deep concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s Reinforced Premium Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE & SAFE Drilling | The proprietary drill bit flute design allows for maximal concrete removal for both EASE OF USE and EFFECTIVENESS
  • ✅ 3 EXTRA-LONG MAKITA DRILL BIT Set Includes: 1 Bit of (1/2" x 12") with a 10" Maximum drilling depth + 1 Bit of (5/8" x 12") with a 10" Maximum drilling depth + 1 Bit of (1" x 10") with a 8" Maximum drilling depth
  • ✅ MAKITA’S SDS-Plus DEEP Drill Bit Set for SDS+ Rotary Hammers with 3 Extra-Long & Thick, Premium, Heavy-Duty, Tungsten Carbide Drill BITS of 1/2", 5/8", & 1" diameter for SMOOTH & RELIABLE Drilling into 8-10" Reinforced Concrete, Tile, Brick & Cinder Block applications
  • Engineered for reduced vibration
  • Aggressive head geometry in primary cutter engineered for use in concrete
  • Central guiding action engineered for more accurate holes
  • Centering tip features a more aggressive design for faster hole starting
  • 3-Cutter bit tip is engineered for drilling in reinforced concrete
  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life

More Info

Makita B-68719 1/8" x 3" Carbide Tipped Percussion Masonry Hammer Drill Bit

More from Tools & Home Improvement
Search only Makita brand name
Makita B-68719 1/8

Current price: 2.99 USD


Check price and availability


Height: 7.87 Inches

Length: 0.16 Inches

Width: 1.73 Inches

  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life
  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • Engineered for reduced vibration
  • Aggressive head geometry in primary cutter engineered for use in concrete
  • Central guiding action engineered for more accurate holes
  • Centering tip features a more aggressive design for faster hole starting
  • Self-centering Carbide tip
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ Five 5/32" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 4" Deep Drilling Depths
  • ✅ MAKITA’S 5 Pack 5/32” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 5 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 4” into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ IDEAL for General Contractors & Construction Industry that require an extra long flute size SDS-Plus bits for DEEPER anchoring lengths and DEEPER holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All standard SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single, One-Piece Bit design are heat forged for STRENGTH and LONGEVITY with a sharp edge Carbide Tip design for maximum impact on masonry/concrete material, allowing for effective and precise drilling
  • ✅ EASILY DRILL into deep concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s Reinforced Premium Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE & SAFE Drilling | The proprietary drill bit flute design allows for maximal concrete removal for both EASE OF USE and EFFECTIVENESS
  • ✅ 3 EXTRA-LONG MAKITA DRILL BIT Set Includes: 1 Bit of (1/2" x 12") with a 10" Maximum drilling depth + 1 Bit of (5/8" x 12") with a 10" Maximum drilling depth + 1 Bit of (1" x 10") with a 8" Maximum drilling depth
  • ✅ MAKITA’S SDS-Plus DEEP Drill Bit Set for SDS+ Rotary Hammers with 3 Extra-Long & Thick, Premium, Heavy-Duty, Tungsten Carbide Drill BITS of 1/2", 5/8", & 1" diameter for SMOOTH & RELIABLE Drilling into 8-10" Reinforced Concrete, Tile, Brick & Cinder Block applications
  • Engineered for reduced vibration
  • Aggressive head geometry in primary cutter engineered for use in concrete
  • Central guiding action engineered for more accurate holes
  • Centering tip features a more aggressive design for faster hole starting
  • 3-Cutter bit tip is engineered for drilling in reinforced concrete
  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life
  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life

More Info

Makita D-00810-25 5/32" x 6-1/4" Sds-Plus Bit, 25/Pk, Stainless Steel

More from Tools & Home Improvement
Search only Makita brand name
Makita D-00810-25 5/32

Current price: 20.99 USD

Saving: $8.20 (28%)


Check price and availability


Height: 0.31 Inches

Length: 0.31 Inches

Width: 6.25 Inches

Weight: 0.08 Pounds

  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life
  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • Engineered for reduced vibration
  • Aggressive head geometry in primary cutter engineered for use in concrete
  • Central guiding action engineered for more accurate holes
  • Centering tip features a more aggressive design for faster hole starting
  • Self-centering Carbide tip
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ Five 5/32" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 4" Deep Drilling Depths
  • ✅ MAKITA’S 5 Pack 5/32” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 5 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 4” into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ IDEAL for General Contractors & Construction Industry that require an extra long flute size SDS-Plus bits for DEEPER anchoring lengths and DEEPER holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All standard SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single, One-Piece Bit design are heat forged for STRENGTH and LONGEVITY with a sharp edge Carbide Tip design for maximum impact on masonry/concrete material, allowing for effective and precise drilling
  • ✅ EASILY DRILL into deep concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s Reinforced Premium Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE & SAFE Drilling | The proprietary drill bit flute design allows for maximal concrete removal for both EASE OF USE and EFFECTIVENESS
  • ✅ 3 EXTRA-LONG MAKITA DRILL BIT Set Includes: 1 Bit of (1/2" x 12") with a 10" Maximum drilling depth + 1 Bit of (5/8" x 12") with a 10" Maximum drilling depth + 1 Bit of (1" x 10") with a 8" Maximum drilling depth
  • ✅ MAKITA’S SDS-Plus DEEP Drill Bit Set for SDS+ Rotary Hammers with 3 Extra-Long & Thick, Premium, Heavy-Duty, Tungsten Carbide Drill BITS of 1/2", 5/8", & 1" diameter for SMOOTH & RELIABLE Drilling into 8-10" Reinforced Concrete, Tile, Brick & Cinder Block applications
  • Engineered for reduced vibration
  • Aggressive head geometry in primary cutter engineered for use in concrete
  • Central guiding action engineered for more accurate holes
  • Centering tip features a more aggressive design for faster hole starting
  • 3-Cutter bit tip is engineered for drilling in reinforced concrete
  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life
  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life
  • Convenient contractor pack contains 25 bits
  • For use with rotary Hammers that accept bits with SDS-plus shanks
  • For drilling holes in a variety of masonry materials including concrete
  • 4" Usable length
  • Special impact grade Carbide
  • Central guiding action for accurate holes
  • Engineered for reduced vibration and noise emissions

More Info

Makita B-68812 3/8" x 6" Carbide Tipped Percussion Masonry Hammer Drill Bit

More from Tools & Home Improvement
Search only Makita brand name
Makita B-68812 3/8

Current price: 4.78 USD


Check price and availability


Height: 9.84 Inches

Length: 0.43 Inches

Width: 1.73 Inches

  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life
  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • Engineered for reduced vibration
  • Aggressive head geometry in primary cutter engineered for use in concrete
  • Central guiding action engineered for more accurate holes
  • Centering tip features a more aggressive design for faster hole starting
  • Self-centering Carbide tip
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ Five 5/32" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 4" Deep Drilling Depths
  • ✅ MAKITA’S 5 Pack 5/32” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 5 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 4” into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ IDEAL for General Contractors & Construction Industry that require an extra long flute size SDS-Plus bits for DEEPER anchoring lengths and DEEPER holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All standard SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single, One-Piece Bit design are heat forged for STRENGTH and LONGEVITY with a sharp edge Carbide Tip design for maximum impact on masonry/concrete material, allowing for effective and precise drilling
  • ✅ EASILY DRILL into deep concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s Reinforced Premium Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE & SAFE Drilling | The proprietary drill bit flute design allows for maximal concrete removal for both EASE OF USE and EFFECTIVENESS
  • ✅ 3 EXTRA-LONG MAKITA DRILL BIT Set Includes: 1 Bit of (1/2" x 12") with a 10" Maximum drilling depth + 1 Bit of (5/8" x 12") with a 10" Maximum drilling depth + 1 Bit of (1" x 10") with a 8" Maximum drilling depth
  • ✅ MAKITA’S SDS-Plus DEEP Drill Bit Set for SDS+ Rotary Hammers with 3 Extra-Long & Thick, Premium, Heavy-Duty, Tungsten Carbide Drill BITS of 1/2", 5/8", & 1" diameter for SMOOTH & RELIABLE Drilling into 8-10" Reinforced Concrete, Tile, Brick & Cinder Block applications
  • Engineered for reduced vibration
  • Aggressive head geometry in primary cutter engineered for use in concrete
  • Central guiding action engineered for more accurate holes
  • Centering tip features a more aggressive design for faster hole starting
  • 3-Cutter bit tip is engineered for drilling in reinforced concrete
  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life
  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life
  • Convenient contractor pack contains 25 bits
  • For use with rotary Hammers that accept bits with SDS-plus shanks
  • For drilling holes in a variety of masonry materials including concrete
  • 4" Usable length
  • Special impact grade Carbide
  • Central guiding action for accurate holes
  • Engineered for reduced vibration and noise emissions
  • For use in corded and cordless hammer drills for drilling holes in masonry materials including concrete, block, brick, plaster, and stone
  • Resharpenable for extended bit life
  • Wide roll forged flutes for longer useful drilling length and rapid dust removal
  • Carbide tipped for longer bit life

More Info

1    2    3    4    5    6    7    8    9    10