Best Masonry Drill Bit Sets. Makita brand. New releases 2021

Makita 5 Piece - SDS-Plus Drill Bit Set For SDS+ Rotary Hammers - Aggressive Drilling For Concrete & Masonry - Carbide Tipped Bits

More from Tools & Home Improvement
Search only Makita brand name
Makita 5 Piece - SDS-Plus Drill Bit Set For SDS+ Rotary Hammers - Aggressive Drilling For Concrete & Masonry - Carbide Tipped Bits

Current price: 22.99 USD


Check price and availability


Height: 3 Inches

Length: 7.25 Inches

Width: 0.75 Inches

  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block

More Info

Makita 7 Piece - Complete Concrete Drill Bit Set for Hammer Drills - Precise Drilling for Light Masonry & Concrete

More from Tools & Home Improvement
Search only Makita brand name
Makita 7 Piece - Complete Concrete Drill Bit Set for Hammer Drills - Precise Drilling for Light Masonry & Concrete

Current price: 17.99 USD


Check price and availability


Height: 0.75 Inches

Length: 6.5 Inches

Width: 4 Inches

  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ Engineered for 3/8" & 1/2" Standard Chuck Hammer Driver Drills, these Bits are IDEAL for General Contractors, DIY, or Homeowners who need a wide variety of concrete drill bit sizes and lengths, all conveniently placed and sleeve protected in a set specifically designed for the most common used sizes in concrete drilling applications
  • ✅ AVOID LOWER PRICED & lower quality bits that wobble, prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective anchoring & fastening and making the overall drilling much more difficult | Makita makes concrete drilling EASY, FAST & RELIABLE, with the right sizes for the most common Tapcon screws and holes. Please see sizing chart image for the corresponding pilot drill bit & fastener diameters
  • ✅ EASILY Drill LONGER & PRECISELY into 4" Light Concrete, Brick & General Masonry with Makita’s Reinforced Premium Tungsten Carbide Tip & Steel Bit Integrity for unmatched LONG LIFE, SAFE Drilling & RELIABLE Screwing & Fastening, while Drill bit flute design allows for maximal amount of concrete removal for both EASE OF USE and EFFECTIVENESS in concrete/masonry drilling applications
  • ✅ 7 ROUND SHANK DRILL BIT SET with all needed sizes includes: 2 Bits of 3/16" + 2 Bits of 1/4" + 1 Bit of 5/32" + 1 Bit of 5/16" + 1 Bit of 3/8" | Engineered in Japan for optimal use with Makita 3/8" & 1/2" Chuck Hammer Drills while also fully compatible with Rounded 3/8" & 1/2" Chuck Hammer Drills
  • ✅ Makita's Complete ROUND Shank Drill Bit Kit For Rounded Chuck Hammer Drills with 7 Premium, Long-Lasting, Light-Duty, Tungsten Carbide Tipped Pilot Bits that prepare the way for EASY & RELIABLE Screwing, Anchoring and Fastening into 4 Inch Masonry like Light Concrete, Brick & Cinder Block

More Info

Makita B-49373 75 PC Metric Drill and Screw Bit Set

More from Tools & Home Improvement
Search only Makita brand name
Makita B-49373 75 PC Metric Drill and Screw Bit Set

Current price: 27.32 USD

Saving: $9.86 (27%)


Check price and availability


Height: 1.97 Inches

Length: 8.66 Inches

Width: 8.86 Inches

Weight: 2.20462262 Pounds

  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ Engineered for 3/8" & 1/2" Standard Chuck Hammer Driver Drills, these Bits are IDEAL for General Contractors, DIY, or Homeowners who need a wide variety of concrete drill bit sizes and lengths, all conveniently placed and sleeve protected in a set specifically designed for the most common used sizes in concrete drilling applications
  • ✅ AVOID LOWER PRICED & lower quality bits that wobble, prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective anchoring & fastening and making the overall drilling much more difficult | Makita makes concrete drilling EASY, FAST & RELIABLE, with the right sizes for the most common Tapcon screws and holes. Please see sizing chart image for the corresponding pilot drill bit & fastener diameters
  • ✅ EASILY Drill LONGER & PRECISELY into 4" Light Concrete, Brick & General Masonry with Makita’s Reinforced Premium Tungsten Carbide Tip & Steel Bit Integrity for unmatched LONG LIFE, SAFE Drilling & RELIABLE Screwing & Fastening, while Drill bit flute design allows for maximal amount of concrete removal for both EASE OF USE and EFFECTIVENESS in concrete/masonry drilling applications
  • ✅ 7 ROUND SHANK DRILL BIT SET with all needed sizes includes: 2 Bits of 3/16" + 2 Bits of 1/4" + 1 Bit of 5/32" + 1 Bit of 5/16" + 1 Bit of 3/8" | Engineered in Japan for optimal use with Makita 3/8" & 1/2" Chuck Hammer Drills while also fully compatible with Rounded 3/8" & 1/2" Chuck Hammer Drills
  • ✅ Makita's Complete ROUND Shank Drill Bit Kit For Rounded Chuck Hammer Drills with 7 Premium, Long-Lasting, Light-Duty, Tungsten Carbide Tipped Pilot Bits that prepare the way for EASY & RELIABLE Screwing, Anchoring and Fastening into 4 Inch Masonry like Light Concrete, Brick & Cinder Block
  • Includes (4) Brad point wood drill bits with size range of (4 - 8 millimetre)
  • Includes (19) titanium nitride coated high speed steel (HSS tin) metal and wood drill bits with size range of (1 - 8 millimetre)
  • Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits
  • Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits
  • Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications

More Info

Makita B-49373 75 PC Metric Drill and Screw Bit Set and B-35097 Impact Gold Ultra-Magnetic Torsion Insert Bit Holder

More from Tools & Home Improvement
Search only Makita brand name
Makita B-49373 75 PC Metric Drill and Screw Bit Set and B-35097 Impact Gold Ultra-Magnetic Torsion Insert Bit Holder

Current price: 33.79 USD

Saving: $8.99 (21%)


Check price and availability


  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ Engineered for 3/8" & 1/2" Standard Chuck Hammer Driver Drills, these Bits are IDEAL for General Contractors, DIY, or Homeowners who need a wide variety of concrete drill bit sizes and lengths, all conveniently placed and sleeve protected in a set specifically designed for the most common used sizes in concrete drilling applications
  • ✅ AVOID LOWER PRICED & lower quality bits that wobble, prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective anchoring & fastening and making the overall drilling much more difficult | Makita makes concrete drilling EASY, FAST & RELIABLE, with the right sizes for the most common Tapcon screws and holes. Please see sizing chart image for the corresponding pilot drill bit & fastener diameters
  • ✅ EASILY Drill LONGER & PRECISELY into 4" Light Concrete, Brick & General Masonry with Makita’s Reinforced Premium Tungsten Carbide Tip & Steel Bit Integrity for unmatched LONG LIFE, SAFE Drilling & RELIABLE Screwing & Fastening, while Drill bit flute design allows for maximal amount of concrete removal for both EASE OF USE and EFFECTIVENESS in concrete/masonry drilling applications
  • ✅ 7 ROUND SHANK DRILL BIT SET with all needed sizes includes: 2 Bits of 3/16" + 2 Bits of 1/4" + 1 Bit of 5/32" + 1 Bit of 5/16" + 1 Bit of 3/8" | Engineered in Japan for optimal use with Makita 3/8" & 1/2" Chuck Hammer Drills while also fully compatible with Rounded 3/8" & 1/2" Chuck Hammer Drills
  • ✅ Makita's Complete ROUND Shank Drill Bit Kit For Rounded Chuck Hammer Drills with 7 Premium, Long-Lasting, Light-Duty, Tungsten Carbide Tipped Pilot Bits that prepare the way for EASY & RELIABLE Screwing, Anchoring and Fastening into 4 Inch Masonry like Light Concrete, Brick & Cinder Block
  • Includes (4) Brad point wood drill bits with size range of (4 - 8 millimetre)
  • Includes (19) titanium nitride coated high speed steel (HSS tin) metal and wood drill bits with size range of (1 - 8 millimetre)
  • Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits
  • Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits
  • Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
  • Two piece design is engineered to allow the torsion technology to fully activate
  • Xtreme torsion Technology is engineered to allow the torsion section of the bit holder to flex under load, taking pressure off of the bit tip for increased durability in high torque applications
  • Rare earth neodymium magnet is 2x stronger than magnets in standard insert bit holders
  • Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits
  • Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits
  • Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications

More Info

Makita 7 Piece - SDS-Plus Complete Drill Bit Set for SDS+ Rotary Hammers - Deep HD Drilling Into Concrete & Masonry

More from Tools & Home Improvement
Search only Makita brand name
Makita 7 Piece - SDS-Plus Complete Drill Bit Set for SDS+ Rotary Hammers - Deep HD Drilling Into Concrete & Masonry

Current price: 47.99 USD


Check price and availability


Height: 3 Inches

Length: 7.25 Inches

Width: 0.75 Inches

Weight: 0.71 Pounds

  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ Engineered for 3/8" & 1/2" Standard Chuck Hammer Driver Drills, these Bits are IDEAL for General Contractors, DIY, or Homeowners who need a wide variety of concrete drill bit sizes and lengths, all conveniently placed and sleeve protected in a set specifically designed for the most common used sizes in concrete drilling applications
  • ✅ AVOID LOWER PRICED & lower quality bits that wobble, prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective anchoring & fastening and making the overall drilling much more difficult | Makita makes concrete drilling EASY, FAST & RELIABLE, with the right sizes for the most common Tapcon screws and holes. Please see sizing chart image for the corresponding pilot drill bit & fastener diameters
  • ✅ EASILY Drill LONGER & PRECISELY into 4" Light Concrete, Brick & General Masonry with Makita’s Reinforced Premium Tungsten Carbide Tip & Steel Bit Integrity for unmatched LONG LIFE, SAFE Drilling & RELIABLE Screwing & Fastening, while Drill bit flute design allows for maximal amount of concrete removal for both EASE OF USE and EFFECTIVENESS in concrete/masonry drilling applications
  • ✅ 7 ROUND SHANK DRILL BIT SET with all needed sizes includes: 2 Bits of 3/16" + 2 Bits of 1/4" + 1 Bit of 5/32" + 1 Bit of 5/16" + 1 Bit of 3/8" | Engineered in Japan for optimal use with Makita 3/8" & 1/2" Chuck Hammer Drills while also fully compatible with Rounded 3/8" & 1/2" Chuck Hammer Drills
  • ✅ Makita's Complete ROUND Shank Drill Bit Kit For Rounded Chuck Hammer Drills with 7 Premium, Long-Lasting, Light-Duty, Tungsten Carbide Tipped Pilot Bits that prepare the way for EASY & RELIABLE Screwing, Anchoring and Fastening into 4 Inch Masonry like Light Concrete, Brick & Cinder Block
  • Includes (4) Brad point wood drill bits with size range of (4 - 8 millimetre)
  • Includes (19) titanium nitride coated high speed steel (HSS tin) metal and wood drill bits with size range of (1 - 8 millimetre)
  • Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits
  • Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits
  • Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
  • Two piece design is engineered to allow the torsion technology to fully activate
  • Xtreme torsion Technology is engineered to allow the torsion section of the bit holder to flex under load, taking pressure off of the bit tip for increased durability in high torque applications
  • Rare earth neodymium magnet is 2x stronger than magnets in standard insert bit holders
  • Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits
  • Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits
  • Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 7 Ultra-Duty Makita SDS-Plus Drill Bit Set for Up to 10“ Deep Drilling Depths, including the most frequently used diameters: 1 Bit of 5/32“ + 1 Bit of 3/16” + 1 Bit of 1/4” + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" + 1 Bit of 3/4”, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, 1" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S 7 Piece Complete SDS-Plus Drill Bit Set For 1" or Greater SDS+ Chuck Rotary Hammer Drills has 7 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10” into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block

More Info

Makita 3 Piece - SDS-Plus Long Drill Bit Set for SDS+ Rotary Hammers - Deep HD Drilling for Concrete & Masonry - Carbide Tipped Bits

More from Tools & Home Improvement
Search only Makita brand name
Makita 3 Piece - SDS-Plus Long Drill Bit Set for SDS+ Rotary Hammers - Deep HD Drilling for Concrete & Masonry - Carbide Tipped Bits

Current price: 29.99 USD


Check price and availability


Height: 3 Inches

Length: 13 Inches

Width: 0.75 Inches

Weight: 0.71 Pounds

  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ Engineered for 3/8" & 1/2" Standard Chuck Hammer Driver Drills, these Bits are IDEAL for General Contractors, DIY, or Homeowners who need a wide variety of concrete drill bit sizes and lengths, all conveniently placed and sleeve protected in a set specifically designed for the most common used sizes in concrete drilling applications
  • ✅ AVOID LOWER PRICED & lower quality bits that wobble, prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective anchoring & fastening and making the overall drilling much more difficult | Makita makes concrete drilling EASY, FAST & RELIABLE, with the right sizes for the most common Tapcon screws and holes. Please see sizing chart image for the corresponding pilot drill bit & fastener diameters
  • ✅ EASILY Drill LONGER & PRECISELY into 4" Light Concrete, Brick & General Masonry with Makita’s Reinforced Premium Tungsten Carbide Tip & Steel Bit Integrity for unmatched LONG LIFE, SAFE Drilling & RELIABLE Screwing & Fastening, while Drill bit flute design allows for maximal amount of concrete removal for both EASE OF USE and EFFECTIVENESS in concrete/masonry drilling applications
  • ✅ 7 ROUND SHANK DRILL BIT SET with all needed sizes includes: 2 Bits of 3/16" + 2 Bits of 1/4" + 1 Bit of 5/32" + 1 Bit of 5/16" + 1 Bit of 3/8" | Engineered in Japan for optimal use with Makita 3/8" & 1/2" Chuck Hammer Drills while also fully compatible with Rounded 3/8" & 1/2" Chuck Hammer Drills
  • ✅ Makita's Complete ROUND Shank Drill Bit Kit For Rounded Chuck Hammer Drills with 7 Premium, Long-Lasting, Light-Duty, Tungsten Carbide Tipped Pilot Bits that prepare the way for EASY & RELIABLE Screwing, Anchoring and Fastening into 4 Inch Masonry like Light Concrete, Brick & Cinder Block
  • Includes (4) Brad point wood drill bits with size range of (4 - 8 millimetre)
  • Includes (19) titanium nitride coated high speed steel (HSS tin) metal and wood drill bits with size range of (1 - 8 millimetre)
  • Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits
  • Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits
  • Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
  • Two piece design is engineered to allow the torsion technology to fully activate
  • Xtreme torsion Technology is engineered to allow the torsion section of the bit holder to flex under load, taking pressure off of the bit tip for increased durability in high torque applications
  • Rare earth neodymium magnet is 2x stronger than magnets in standard insert bit holders
  • Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits
  • Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits
  • Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 7 Ultra-Duty Makita SDS-Plus Drill Bit Set for Up to 10“ Deep Drilling Depths, including the most frequently used diameters: 1 Bit of 5/32“ + 1 Bit of 3/16” + 1 Bit of 1/4” + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" + 1 Bit of 3/4”, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, 1" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S 7 Piece Complete SDS-Plus Drill Bit Set For 1" or Greater SDS+ Chuck Rotary Hammer Drills has 7 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10” into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ IDEAL for General Contractors & Construction Industry that require an extra long flute size SDS-Plus bits for DEEPER anchoring lengths and DEEPER holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All standard SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single, One-Piece Bit design are heat forged for STRENGTH and LONGEVITY with a sharp edge Carbide Tip design for maximum impact on masonry/concrete material, allowing for effective and precise drilling
  • ✅ EASILY DRILL into deep concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s Reinforced Premium Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE & SAFE Drilling | The proprietary drill bit flute design allows for maximal concrete removal for both EASE OF USE and EFFECTIVENESS
  • ✅ 3 EXTRA-LONG MAKITA DRILL BIT Set Includes: 1 Bit of (1/2" x 12") with a 10" Maximum drilling depth + 1 Bit of (5/8" x 12") with a 10" Maximum drilling depth + 1 Bit of (1" x 10") with a 8" Maximum drilling depth
  • ✅ MAKITA’S SDS-Plus DEEP Drill Bit Set for SDS+ Rotary Hammers with 3 Extra-Long & Thick, Premium, Heavy-Duty, Tungsten Carbide Drill BITS of 1/2", 5/8", & 1" diameter for SMOOTH & RELIABLE Drilling into 8-10" Reinforced Concrete, Tile, Brick & Cinder Block applications

More Info

Makita D-59178 18 Pc. Assorted Drill Bit Set

More from Tools & Home Improvement
Search only Makita brand name
Makita D-59178 18 Pc. Assorted Drill Bit Set

Current price: 19.99 USD

Saving: $4.01 (17%)


Check price and availability


Height: 6.102 Inches

Length: 1.378 Inches

Width: 4.331 Inches

Weight: 1.10231131 Pounds

  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ Engineered for 3/8" & 1/2" Standard Chuck Hammer Driver Drills, these Bits are IDEAL for General Contractors, DIY, or Homeowners who need a wide variety of concrete drill bit sizes and lengths, all conveniently placed and sleeve protected in a set specifically designed for the most common used sizes in concrete drilling applications
  • ✅ AVOID LOWER PRICED & lower quality bits that wobble, prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective anchoring & fastening and making the overall drilling much more difficult | Makita makes concrete drilling EASY, FAST & RELIABLE, with the right sizes for the most common Tapcon screws and holes. Please see sizing chart image for the corresponding pilot drill bit & fastener diameters
  • ✅ EASILY Drill LONGER & PRECISELY into 4" Light Concrete, Brick & General Masonry with Makita’s Reinforced Premium Tungsten Carbide Tip & Steel Bit Integrity for unmatched LONG LIFE, SAFE Drilling & RELIABLE Screwing & Fastening, while Drill bit flute design allows for maximal amount of concrete removal for both EASE OF USE and EFFECTIVENESS in concrete/masonry drilling applications
  • ✅ 7 ROUND SHANK DRILL BIT SET with all needed sizes includes: 2 Bits of 3/16" + 2 Bits of 1/4" + 1 Bit of 5/32" + 1 Bit of 5/16" + 1 Bit of 3/8" | Engineered in Japan for optimal use with Makita 3/8" & 1/2" Chuck Hammer Drills while also fully compatible with Rounded 3/8" & 1/2" Chuck Hammer Drills
  • ✅ Makita's Complete ROUND Shank Drill Bit Kit For Rounded Chuck Hammer Drills with 7 Premium, Long-Lasting, Light-Duty, Tungsten Carbide Tipped Pilot Bits that prepare the way for EASY & RELIABLE Screwing, Anchoring and Fastening into 4 Inch Masonry like Light Concrete, Brick & Cinder Block
  • Includes (4) Brad point wood drill bits with size range of (4 - 8 millimetre)
  • Includes (19) titanium nitride coated high speed steel (HSS tin) metal and wood drill bits with size range of (1 - 8 millimetre)
  • Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits
  • Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits
  • Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
  • Two piece design is engineered to allow the torsion technology to fully activate
  • Xtreme torsion Technology is engineered to allow the torsion section of the bit holder to flex under load, taking pressure off of the bit tip for increased durability in high torque applications
  • Rare earth neodymium magnet is 2x stronger than magnets in standard insert bit holders
  • Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits
  • Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits
  • Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 7 Ultra-Duty Makita SDS-Plus Drill Bit Set for Up to 10“ Deep Drilling Depths, including the most frequently used diameters: 1 Bit of 5/32“ + 1 Bit of 3/16” + 1 Bit of 1/4” + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" + 1 Bit of 3/4”, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, 1" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S 7 Piece Complete SDS-Plus Drill Bit Set For 1" or Greater SDS+ Chuck Rotary Hammer Drills has 7 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10” into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ IDEAL for General Contractors & Construction Industry that require an extra long flute size SDS-Plus bits for DEEPER anchoring lengths and DEEPER holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All standard SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single, One-Piece Bit design are heat forged for STRENGTH and LONGEVITY with a sharp edge Carbide Tip design for maximum impact on masonry/concrete material, allowing for effective and precise drilling
  • ✅ EASILY DRILL into deep concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s Reinforced Premium Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE & SAFE Drilling | The proprietary drill bit flute design allows for maximal concrete removal for both EASE OF USE and EFFECTIVENESS
  • ✅ 3 EXTRA-LONG MAKITA DRILL BIT Set Includes: 1 Bit of (1/2" x 12") with a 10" Maximum drilling depth + 1 Bit of (5/8" x 12") with a 10" Maximum drilling depth + 1 Bit of (1" x 10") with a 8" Maximum drilling depth
  • ✅ MAKITA’S SDS-Plus DEEP Drill Bit Set for SDS+ Rotary Hammers with 3 Extra-Long & Thick, Premium, Heavy-Duty, Tungsten Carbide Drill BITS of 1/2", 5/8", & 1" diameter for SMOOTH & RELIABLE Drilling into 8-10" Reinforced Concrete, Tile, Brick & Cinder Block applications
  • Masonry hammer drill bits can be used in most hammer drills for drilling into brick, block and concrete
  • Brad point wood drill bits provide clean, straight holes in wood
  • Metal drilling bits have a 135° split point geometry for fast starts and reduced walking
  • Metal drilling bits are made of hss-g for longer life
  • Includes bits for drilling in metal, wood and masonry materials

More Info

Makita B-60969 5 Pc. Sds-Plus Bit Set, 2-Cutter

More from Tools & Home Improvement
Search only Makita brand name
Makita B-60969 5 Pc. Sds-Plus Bit Set, 2-Cutter

Current price: 17.99 USD


Check price and availability


Height: 0.75 Inches

Length: 0.59 Inches

Width: 2.84 Inches

Weight: 0.74 Pounds

  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ Engineered for 3/8" & 1/2" Standard Chuck Hammer Driver Drills, these Bits are IDEAL for General Contractors, DIY, or Homeowners who need a wide variety of concrete drill bit sizes and lengths, all conveniently placed and sleeve protected in a set specifically designed for the most common used sizes in concrete drilling applications
  • ✅ AVOID LOWER PRICED & lower quality bits that wobble, prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective anchoring & fastening and making the overall drilling much more difficult | Makita makes concrete drilling EASY, FAST & RELIABLE, with the right sizes for the most common Tapcon screws and holes. Please see sizing chart image for the corresponding pilot drill bit & fastener diameters
  • ✅ EASILY Drill LONGER & PRECISELY into 4" Light Concrete, Brick & General Masonry with Makita’s Reinforced Premium Tungsten Carbide Tip & Steel Bit Integrity for unmatched LONG LIFE, SAFE Drilling & RELIABLE Screwing & Fastening, while Drill bit flute design allows for maximal amount of concrete removal for both EASE OF USE and EFFECTIVENESS in concrete/masonry drilling applications
  • ✅ 7 ROUND SHANK DRILL BIT SET with all needed sizes includes: 2 Bits of 3/16" + 2 Bits of 1/4" + 1 Bit of 5/32" + 1 Bit of 5/16" + 1 Bit of 3/8" | Engineered in Japan for optimal use with Makita 3/8" & 1/2" Chuck Hammer Drills while also fully compatible with Rounded 3/8" & 1/2" Chuck Hammer Drills
  • ✅ Makita's Complete ROUND Shank Drill Bit Kit For Rounded Chuck Hammer Drills with 7 Premium, Long-Lasting, Light-Duty, Tungsten Carbide Tipped Pilot Bits that prepare the way for EASY & RELIABLE Screwing, Anchoring and Fastening into 4 Inch Masonry like Light Concrete, Brick & Cinder Block
  • Includes (4) Brad point wood drill bits with size range of (4 - 8 millimetre)
  • Includes (19) titanium nitride coated high speed steel (HSS tin) metal and wood drill bits with size range of (1 - 8 millimetre)
  • Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits
  • Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits
  • Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
  • Two piece design is engineered to allow the torsion technology to fully activate
  • Xtreme torsion Technology is engineered to allow the torsion section of the bit holder to flex under load, taking pressure off of the bit tip for increased durability in high torque applications
  • Rare earth neodymium magnet is 2x stronger than magnets in standard insert bit holders
  • Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits
  • Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits
  • Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 7 Ultra-Duty Makita SDS-Plus Drill Bit Set for Up to 10“ Deep Drilling Depths, including the most frequently used diameters: 1 Bit of 5/32“ + 1 Bit of 3/16” + 1 Bit of 1/4” + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" + 1 Bit of 3/4”, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, 1" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S 7 Piece Complete SDS-Plus Drill Bit Set For 1" or Greater SDS+ Chuck Rotary Hammer Drills has 7 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10” into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ IDEAL for General Contractors & Construction Industry that require an extra long flute size SDS-Plus bits for DEEPER anchoring lengths and DEEPER holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All standard SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single, One-Piece Bit design are heat forged for STRENGTH and LONGEVITY with a sharp edge Carbide Tip design for maximum impact on masonry/concrete material, allowing for effective and precise drilling
  • ✅ EASILY DRILL into deep concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s Reinforced Premium Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE & SAFE Drilling | The proprietary drill bit flute design allows for maximal concrete removal for both EASE OF USE and EFFECTIVENESS
  • ✅ 3 EXTRA-LONG MAKITA DRILL BIT Set Includes: 1 Bit of (1/2" x 12") with a 10" Maximum drilling depth + 1 Bit of (5/8" x 12") with a 10" Maximum drilling depth + 1 Bit of (1" x 10") with a 8" Maximum drilling depth
  • ✅ MAKITA’S SDS-Plus DEEP Drill Bit Set for SDS+ Rotary Hammers with 3 Extra-Long & Thick, Premium, Heavy-Duty, Tungsten Carbide Drill BITS of 1/2", 5/8", & 1" diameter for SMOOTH & RELIABLE Drilling into 8-10" Reinforced Concrete, Tile, Brick & Cinder Block applications
  • Masonry hammer drill bits can be used in most hammer drills for drilling into brick, block and concrete
  • Brad point wood drill bits provide clean, straight holes in wood
  • Metal drilling bits have a 135° split point geometry for fast starts and reduced walking
  • Metal drilling bits are made of hss-g for longer life
  • Includes bits for drilling in metal, wood and masonry materials
  • Aggressive head geometry in primary cutter engineered for use in concrete
  • Central guiding action engineered for more accurate holes
  • Centering tip features a more aggressive design for faster hole starting
  • Self-centering Carbide tip
  • Set includes (1) 3/16" x 6", (1) 1/4" x 6", (1) 5/16" x 6", (1) 3/8" x 6", (1) 1/2" x 6" SDS-plus bits

More Info

Makita 7 Piece - SDS-Plus Drill, Chisel & Point Bit Set for SDS+ Rotary Hammers - Aggressive Demolition for Concrete & Masonry

More from Tools & Home Improvement
Search only Makita brand name
Makita 7 Piece - SDS-Plus Drill, Chisel & Point Bit Set for SDS+ Rotary Hammers - Aggressive Demolition for Concrete & Masonry

Current price: 37.99 USD


Check price and availability


Height: 3 Inches

Length: 7.25 Inches

Width: 1 Inches

Weight: 0.9700339528 Pounds

  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ Engineered for 3/8" & 1/2" Standard Chuck Hammer Driver Drills, these Bits are IDEAL for General Contractors, DIY, or Homeowners who need a wide variety of concrete drill bit sizes and lengths, all conveniently placed and sleeve protected in a set specifically designed for the most common used sizes in concrete drilling applications
  • ✅ AVOID LOWER PRICED & lower quality bits that wobble, prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective anchoring & fastening and making the overall drilling much more difficult | Makita makes concrete drilling EASY, FAST & RELIABLE, with the right sizes for the most common Tapcon screws and holes. Please see sizing chart image for the corresponding pilot drill bit & fastener diameters
  • ✅ EASILY Drill LONGER & PRECISELY into 4" Light Concrete, Brick & General Masonry with Makita’s Reinforced Premium Tungsten Carbide Tip & Steel Bit Integrity for unmatched LONG LIFE, SAFE Drilling & RELIABLE Screwing & Fastening, while Drill bit flute design allows for maximal amount of concrete removal for both EASE OF USE and EFFECTIVENESS in concrete/masonry drilling applications
  • ✅ 7 ROUND SHANK DRILL BIT SET with all needed sizes includes: 2 Bits of 3/16" + 2 Bits of 1/4" + 1 Bit of 5/32" + 1 Bit of 5/16" + 1 Bit of 3/8" | Engineered in Japan for optimal use with Makita 3/8" & 1/2" Chuck Hammer Drills while also fully compatible with Rounded 3/8" & 1/2" Chuck Hammer Drills
  • ✅ Makita's Complete ROUND Shank Drill Bit Kit For Rounded Chuck Hammer Drills with 7 Premium, Long-Lasting, Light-Duty, Tungsten Carbide Tipped Pilot Bits that prepare the way for EASY & RELIABLE Screwing, Anchoring and Fastening into 4 Inch Masonry like Light Concrete, Brick & Cinder Block
  • Includes (4) Brad point wood drill bits with size range of (4 - 8 millimetre)
  • Includes (19) titanium nitride coated high speed steel (HSS tin) metal and wood drill bits with size range of (1 - 8 millimetre)
  • Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits
  • Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits
  • Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
  • Two piece design is engineered to allow the torsion technology to fully activate
  • Xtreme torsion Technology is engineered to allow the torsion section of the bit holder to flex under load, taking pressure off of the bit tip for increased durability in high torque applications
  • Rare earth neodymium magnet is 2x stronger than magnets in standard insert bit holders
  • Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits
  • Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits
  • Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 7 Ultra-Duty Makita SDS-Plus Drill Bit Set for Up to 10“ Deep Drilling Depths, including the most frequently used diameters: 1 Bit of 5/32“ + 1 Bit of 3/16” + 1 Bit of 1/4” + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" + 1 Bit of 3/4”, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, 1" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S 7 Piece Complete SDS-Plus Drill Bit Set For 1" or Greater SDS+ Chuck Rotary Hammer Drills has 7 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10” into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ IDEAL for General Contractors & Construction Industry that require an extra long flute size SDS-Plus bits for DEEPER anchoring lengths and DEEPER holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All standard SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single, One-Piece Bit design are heat forged for STRENGTH and LONGEVITY with a sharp edge Carbide Tip design for maximum impact on masonry/concrete material, allowing for effective and precise drilling
  • ✅ EASILY DRILL into deep concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s Reinforced Premium Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE & SAFE Drilling | The proprietary drill bit flute design allows for maximal concrete removal for both EASE OF USE and EFFECTIVENESS
  • ✅ 3 EXTRA-LONG MAKITA DRILL BIT Set Includes: 1 Bit of (1/2" x 12") with a 10" Maximum drilling depth + 1 Bit of (5/8" x 12") with a 10" Maximum drilling depth + 1 Bit of (1" x 10") with a 8" Maximum drilling depth
  • ✅ MAKITA’S SDS-Plus DEEP Drill Bit Set for SDS+ Rotary Hammers with 3 Extra-Long & Thick, Premium, Heavy-Duty, Tungsten Carbide Drill BITS of 1/2", 5/8", & 1" diameter for SMOOTH & RELIABLE Drilling into 8-10" Reinforced Concrete, Tile, Brick & Cinder Block applications
  • Masonry hammer drill bits can be used in most hammer drills for drilling into brick, block and concrete
  • Brad point wood drill bits provide clean, straight holes in wood
  • Metal drilling bits have a 135° split point geometry for fast starts and reduced walking
  • Metal drilling bits are made of hss-g for longer life
  • Includes bits for drilling in metal, wood and masonry materials
  • Aggressive head geometry in primary cutter engineered for use in concrete
  • Central guiding action engineered for more accurate holes
  • Centering tip features a more aggressive design for faster hole starting
  • Self-centering Carbide tip
  • Set includes (1) 3/16" x 6", (1) 1/4" x 6", (1) 5/16" x 6", (1) 3/8" x 6", (1) 1/2" x 6" SDS-plus bits
  • ✅ MAKITA'S FLAT CHISEL edges, chips, scales or CHANNELS concrete, stone, masonry and brick | Makita’s BULL POINT demolishes and starts holes in concrete slabs, brick, mortar, slate, masonry, and all different types of stones | Makita’s DRILL BITS drills precise, reliable and common-sized holes for reliable anchoring and fastening
  • ✅ AVOID LOWER PRICED & lower quality Chisel and Bull Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolition and making the overall chiseling much more difficult | Makita's Single-Piece Chisels & Points are heat-treated and forged for unmatched STRENGTH and LONGEVITY, with its sharp edge design for MAXIMUM masonry impact
  • ✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping and scaling large areas
  • ✅ 7 Piece Set Includes: 1 FLAT Chisel of 10" x 3/4” + 1 POINT Bit 10" Long + 1 Drill Bit of 3/16" + 1 Drill Bit of 1/4" + 1 Drill Bit of 5/16" + 1 Drill Bit of 3/8" + 1 Drill Bit of 1/2"
  • ✅ MAKITA'S Complete 7 Piece SDS+ Drill & Demolition Bit Set for SDS+ Rotary Hammers makes masonry drilling, chiseling & demolition EASY, for UNMATCHED drilling, edging, chipping, scaling and channeling concrete, weld spatter, into masonry, tile and brick

More Info

Makita D-23765 Masonry and Metal Drill Bit Set (5 Piece), 1/4"

More from Tools & Home Improvement
Search only Makita brand name
Makita D-23765 Masonry and Metal Drill Bit Set (5 Piece), 1/4

Current price: 18.84 USD


Check price and availability


Height: 0.67 Inches

Length: 2.95 Inches

Width: 5.71 Inches

  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ Engineered for 3/8" & 1/2" Standard Chuck Hammer Driver Drills, these Bits are IDEAL for General Contractors, DIY, or Homeowners who need a wide variety of concrete drill bit sizes and lengths, all conveniently placed and sleeve protected in a set specifically designed for the most common used sizes in concrete drilling applications
  • ✅ AVOID LOWER PRICED & lower quality bits that wobble, prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective anchoring & fastening and making the overall drilling much more difficult | Makita makes concrete drilling EASY, FAST & RELIABLE, with the right sizes for the most common Tapcon screws and holes. Please see sizing chart image for the corresponding pilot drill bit & fastener diameters
  • ✅ EASILY Drill LONGER & PRECISELY into 4" Light Concrete, Brick & General Masonry with Makita’s Reinforced Premium Tungsten Carbide Tip & Steel Bit Integrity for unmatched LONG LIFE, SAFE Drilling & RELIABLE Screwing & Fastening, while Drill bit flute design allows for maximal amount of concrete removal for both EASE OF USE and EFFECTIVENESS in concrete/masonry drilling applications
  • ✅ 7 ROUND SHANK DRILL BIT SET with all needed sizes includes: 2 Bits of 3/16" + 2 Bits of 1/4" + 1 Bit of 5/32" + 1 Bit of 5/16" + 1 Bit of 3/8" | Engineered in Japan for optimal use with Makita 3/8" & 1/2" Chuck Hammer Drills while also fully compatible with Rounded 3/8" & 1/2" Chuck Hammer Drills
  • ✅ Makita's Complete ROUND Shank Drill Bit Kit For Rounded Chuck Hammer Drills with 7 Premium, Long-Lasting, Light-Duty, Tungsten Carbide Tipped Pilot Bits that prepare the way for EASY & RELIABLE Screwing, Anchoring and Fastening into 4 Inch Masonry like Light Concrete, Brick & Cinder Block
  • Includes (4) Brad point wood drill bits with size range of (4 - 8 millimetre)
  • Includes (19) titanium nitride coated high speed steel (HSS tin) metal and wood drill bits with size range of (1 - 8 millimetre)
  • Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits
  • Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits
  • Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
  • Two piece design is engineered to allow the torsion technology to fully activate
  • Xtreme torsion Technology is engineered to allow the torsion section of the bit holder to flex under load, taking pressure off of the bit tip for increased durability in high torque applications
  • Rare earth neodymium magnet is 2x stronger than magnets in standard insert bit holders
  • Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits
  • Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits
  • Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling
  • ✅ 7 Ultra-Duty Makita SDS-Plus Drill Bit Set for Up to 10“ Deep Drilling Depths, including the most frequently used diameters: 1 Bit of 5/32“ + 1 Bit of 3/16” + 1 Bit of 1/4” + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" + 1 Bit of 3/4”, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, 1" or Greater SDS-Plus Hammer Drills
  • ✅ MAKITA’S 7 Piece Complete SDS-Plus Drill Bit Set For 1" or Greater SDS+ Chuck Rotary Hammer Drills has 7 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10” into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block
  • ✅ IDEAL for General Contractors & Construction Industry that require an extra long flute size SDS-Plus bits for DEEPER anchoring lengths and DEEPER holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All standard SDS-Plus Rotary Hammers
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single, One-Piece Bit design are heat forged for STRENGTH and LONGEVITY with a sharp edge Carbide Tip design for maximum impact on masonry/concrete material, allowing for effective and precise drilling
  • ✅ EASILY DRILL into deep concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s Reinforced Premium Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE & SAFE Drilling | The proprietary drill bit flute design allows for maximal concrete removal for both EASE OF USE and EFFECTIVENESS
  • ✅ 3 EXTRA-LONG MAKITA DRILL BIT Set Includes: 1 Bit of (1/2" x 12") with a 10" Maximum drilling depth + 1 Bit of (5/8" x 12") with a 10" Maximum drilling depth + 1 Bit of (1" x 10") with a 8" Maximum drilling depth
  • ✅ MAKITA’S SDS-Plus DEEP Drill Bit Set for SDS+ Rotary Hammers with 3 Extra-Long & Thick, Premium, Heavy-Duty, Tungsten Carbide Drill BITS of 1/2", 5/8", & 1" diameter for SMOOTH & RELIABLE Drilling into 8-10" Reinforced Concrete, Tile, Brick & Cinder Block applications
  • Masonry hammer drill bits can be used in most hammer drills for drilling into brick, block and concrete
  • Brad point wood drill bits provide clean, straight holes in wood
  • Metal drilling bits have a 135° split point geometry for fast starts and reduced walking
  • Metal drilling bits are made of hss-g for longer life
  • Includes bits for drilling in metal, wood and masonry materials
  • Aggressive head geometry in primary cutter engineered for use in concrete
  • Central guiding action engineered for more accurate holes
  • Centering tip features a more aggressive design for faster hole starting
  • Self-centering Carbide tip
  • Set includes (1) 3/16" x 6", (1) 1/4" x 6", (1) 5/16" x 6", (1) 3/8" x 6", (1) 1/2" x 6" SDS-plus bits
  • ✅ MAKITA'S FLAT CHISEL edges, chips, scales or CHANNELS concrete, stone, masonry and brick | Makita’s BULL POINT demolishes and starts holes in concrete slabs, brick, mortar, slate, masonry, and all different types of stones | Makita’s DRILL BITS drills precise, reliable and common-sized holes for reliable anchoring and fastening
  • ✅ AVOID LOWER PRICED & lower quality Chisel and Bull Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolition and making the overall chiseling much more difficult | Makita's Single-Piece Chisels & Points are heat-treated and forged for unmatched STRENGTH and LONGEVITY, with its sharp edge design for MAXIMUM masonry impact
  • ✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping and scaling large areas
  • ✅ 7 Piece Set Includes: 1 FLAT Chisel of 10" x 3/4” + 1 POINT Bit 10" Long + 1 Drill Bit of 3/16" + 1 Drill Bit of 1/4" + 1 Drill Bit of 5/16" + 1 Drill Bit of 3/8" + 1 Drill Bit of 1/2"
  • ✅ MAKITA'S Complete 7 Piece SDS+ Drill & Demolition Bit Set for SDS+ Rotary Hammers makes masonry drilling, chiseling & demolition EASY, for UNMATCHED drilling, edging, chipping, scaling and channeling concrete, weld spatter, into masonry, tile and brick
  • Also works with 3/8" and 1/2" drills
  • Includes bits for drilling in metal and masonry materials
  • 1/4" hex shank for direct use in impact drivers
  • Hex shank design allows for quick and convenient bit changes

More Info

1    2    3    4    5    6    7    8    9    10