Elegant Jig Saw Accessories. Reviews September, 2021, page 10

UHMW Precision Milled Bar 3/4" X 3/8" X 36" For Jigs, Fixtures or Miter Slots (size 3/4" x 3/8"). Slick Durable Material Slides with Ease. Ideal for Table Saws, Router Table and Bandsaws (2 UHMW Bars)

Search only Peachtree Woodworking Supply brand name
UHMW Precision Milled Bar 3/4

Current price: 24.99 USD


Check price and availability


  • 🇺🇸 Use this UHMW to make jigs and fixtures for your table saw , router table, etc. Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, band saw or router table. Length of bar may vary slightly.MADE IN THE USA!
  • 🇺🇸 UHMW (Ultra High Molecular Weight) Polymer (plastic) is a linear polyethylene material with a molecular weight in the range of 3,000,000 to 6,000,000. UHMW is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use.
  • 🇺🇸 Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 Its also very slick in comparison to wood and other plastics. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 The idea behind using UHMW material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics. This makes it ideal for sleds where repetitive sliding happens regularly

More Info

Milescraft 1219 CircleGuideKit, Black

Search only Milescraft brand name
Milescraft 1219 CircleGuideKit, Black

Current price: 39.99 USD

Saving: $5.00 (11%)


Check price and availability


Height: 3.2 Inches

Length: 18.75 Inches

Width: 9.5 Inches

Warranty: 3 year manufacturer

  • 🇺🇸 Use this UHMW to make jigs and fixtures for your table saw , router table, etc. Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, band saw or router table. Length of bar may vary slightly.MADE IN THE USA!
  • 🇺🇸 UHMW (Ultra High Molecular Weight) Polymer (plastic) is a linear polyethylene material with a molecular weight in the range of 3,000,000 to 6,000,000. UHMW is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use.
  • 🇺🇸 Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 Its also very slick in comparison to wood and other plastics. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 The idea behind using UHMW material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics. This makes it ideal for sleds where repetitive sliding happens regularly
  • Equipped with the patented turn-n-lock technology allowing for fast tool-free guide Bushing and router attachment exchanges
  • Bonus 13" Offset base provides added stability when finishing the edges on your work piece using your router, oversized handle knob is easy to grip providing superior control of your router
  • Both the small and large circle jigs quickly and easily attach to the included turn-n-lock circle guide head
  • Both the small and large circle jigs have built in metric and imperial scales, with an easy readout window for setting the diameter of both your inside and outside cuts
  • Small circle Jig cuts circles from 1. 5" To 12" In diameter; Large circle Jig cuts circles from 10" To 52" In diameter

More Info

HORUSDY 25-Piece T Shank Jig Saw Blade Set, Made with HSS/BIM/HCS, T-Shank Blades for Wood, Plastic and Metal Cutting

Search only HORUSDY brand name
HORUSDY 25-Piece T Shank Jig Saw Blade Set, Made with HSS/BIM/HCS, T-Shank Blades for Wood, Plastic and Metal Cutting

Current price: 9.99 USD


Check price and availability


Height: 0.65 Inches

Length: 5 Inches

Width: 4.5 Inches

Weight: 0.36875 Pounds

  • 🇺🇸 Use this UHMW to make jigs and fixtures for your table saw , router table, etc. Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, band saw or router table. Length of bar may vary slightly.MADE IN THE USA!
  • 🇺🇸 UHMW (Ultra High Molecular Weight) Polymer (plastic) is a linear polyethylene material with a molecular weight in the range of 3,000,000 to 6,000,000. UHMW is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use.
  • 🇺🇸 Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 Its also very slick in comparison to wood and other plastics. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 The idea behind using UHMW material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics. This makes it ideal for sleds where repetitive sliding happens regularly
  • Equipped with the patented turn-n-lock technology allowing for fast tool-free guide Bushing and router attachment exchanges
  • Bonus 13" Offset base provides added stability when finishing the edges on your work piece using your router, oversized handle knob is easy to grip providing superior control of your router
  • Both the small and large circle jigs quickly and easily attach to the included turn-n-lock circle guide head
  • Both the small and large circle jigs have built in metric and imperial scales, with an easy readout window for setting the diameter of both your inside and outside cuts
  • Small circle Jig cuts circles from 1. 5" To 12" In diameter; Large circle Jig cuts circles from 10" To 52" In diameter
  • [Durable box]: Each jig saw blade is put in a separate box, which is very durable。
  • [Wood and Metal ]: 25-Piece Set includes (T101B / T101A0 / T144D) blades for wood, straight and very fast cuts. (T118A / T118B ) blades for Thin Sheet Metal Steel, Aluminum and fast cuts. (T123XF / T345XF ) blades for heavy-duty cuts in hardwoods and metal.
  • [Fast Cutting]: They provide Curved for efficiency Cuts, Rapid Cuts and Plunge Cuts in Hard and Soft Woods, Thin Sheet Metal Steel, plastic and metal.
  • [High Material]: HCS and HSS for enhanced quality and precise cuts. BIM blades for heavy-duty cutting of hardwood and metal, HCS blades for general wood cutting/HSS blades for hardwood, metal and plastic cutting.
  • [Widely Applicable]: T-shank design fits BOSCH and DEWALT jig saws, Fits most jig saw models.

More Info

Bora Saw Plate – The Easy To Use Saw Sled/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications & Measurements, 544006

Search only Bora brand name
Bora Saw Plate – The Easy To Use Saw Sled/Circular Saw Guide That ensures Straight, Precise Cuts. Easily Rip Plywood or Other Sheet Material To Your Exact Specifications & Measurements, 544006

Current price: 25.99 USD

Saving: $3.01 (10%)


Check price and availability


Height: 14 Inches

Length: 8 Inches

Width: 2 Inches

  • 🇺🇸 Use this UHMW to make jigs and fixtures for your table saw , router table, etc. Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, band saw or router table. Length of bar may vary slightly.MADE IN THE USA!
  • 🇺🇸 UHMW (Ultra High Molecular Weight) Polymer (plastic) is a linear polyethylene material with a molecular weight in the range of 3,000,000 to 6,000,000. UHMW is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use.
  • 🇺🇸 Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 Its also very slick in comparison to wood and other plastics. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 The idea behind using UHMW material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics. This makes it ideal for sleds where repetitive sliding happens regularly
  • Equipped with the patented turn-n-lock technology allowing for fast tool-free guide Bushing and router attachment exchanges
  • Bonus 13" Offset base provides added stability when finishing the edges on your work piece using your router, oversized handle knob is easy to grip providing superior control of your router
  • Both the small and large circle jigs quickly and easily attach to the included turn-n-lock circle guide head
  • Both the small and large circle jigs have built in metric and imperial scales, with an easy readout window for setting the diameter of both your inside and outside cuts
  • Small circle Jig cuts circles from 1. 5" To 12" In diameter; Large circle Jig cuts circles from 10" To 52" In diameter
  • [Durable box]: Each jig saw blade is put in a separate box, which is very durable。
  • [Wood and Metal ]: 25-Piece Set includes (T101B / T101A0 / T144D) blades for wood, straight and very fast cuts. (T118A / T118B ) blades for Thin Sheet Metal Steel, Aluminum and fast cuts. (T123XF / T345XF ) blades for heavy-duty cuts in hardwoods and metal.
  • [Fast Cutting]: They provide Curved for efficiency Cuts, Rapid Cuts and Plunge Cuts in Hard and Soft Woods, Thin Sheet Metal Steel, plastic and metal.
  • [High Material]: HCS and HSS for enhanced quality and precise cuts. BIM blades for heavy-duty cutting of hardwood and metal, HCS blades for general wood cutting/HSS blades for hardwood, metal and plastic cutting.
  • [Widely Applicable]: T-shank design fits BOSCH and DEWALT jig saws, Fits most jig saw models.
  • Low profile front Clamps allow a greater range of placement.Friction fit cut indicator doesn't require tools to adjust or lock in place.Secure - 3 points of contact means your saw is held securely while cutting.Replaces Bora saw plate - 542006
  • New side stop allows you to replace the tool in exactly the same place, every time
  • Improved Front fence minimizes side to side tool movement
  • Versatile - Fits right- and left-handed circular saws
  • Works with the Bora WTX Clamp edges and Bora NGX clamp edges

More Info

DEWALT 20V Max Cordless Drill / Driver Kit, Compact, 1/2-Inch (DCD771C2)

Search only DEWALT brand name
DEWALT 20V Max Cordless Drill / Driver Kit, Compact, 1/2-Inch (DCD771C2)

Current price: 103.81 USD

Saving: $65.19 (39%)


Check price and availability


Height: 4.25 Inches

Length: 13.88 Inches

Width: 9.88 Inches

Weight: 3.637627323 Pounds

Warranty: 3 Year Limited Warranty

  • 🇺🇸 Use this UHMW to make jigs and fixtures for your table saw , router table, etc. Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, band saw or router table. Length of bar may vary slightly.MADE IN THE USA!
  • 🇺🇸 UHMW (Ultra High Molecular Weight) Polymer (plastic) is a linear polyethylene material with a molecular weight in the range of 3,000,000 to 6,000,000. UHMW is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use.
  • 🇺🇸 Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 Its also very slick in comparison to wood and other plastics. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 The idea behind using UHMW material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics. This makes it ideal for sleds where repetitive sliding happens regularly
  • Equipped with the patented turn-n-lock technology allowing for fast tool-free guide Bushing and router attachment exchanges
  • Bonus 13" Offset base provides added stability when finishing the edges on your work piece using your router, oversized handle knob is easy to grip providing superior control of your router
  • Both the small and large circle jigs quickly and easily attach to the included turn-n-lock circle guide head
  • Both the small and large circle jigs have built in metric and imperial scales, with an easy readout window for setting the diameter of both your inside and outside cuts
  • Small circle Jig cuts circles from 1. 5" To 12" In diameter; Large circle Jig cuts circles from 10" To 52" In diameter
  • [Durable box]: Each jig saw blade is put in a separate box, which is very durable。
  • [Wood and Metal ]: 25-Piece Set includes (T101B / T101A0 / T144D) blades for wood, straight and very fast cuts. (T118A / T118B ) blades for Thin Sheet Metal Steel, Aluminum and fast cuts. (T123XF / T345XF ) blades for heavy-duty cuts in hardwoods and metal.
  • [Fast Cutting]: They provide Curved for efficiency Cuts, Rapid Cuts and Plunge Cuts in Hard and Soft Woods, Thin Sheet Metal Steel, plastic and metal.
  • [High Material]: HCS and HSS for enhanced quality and precise cuts. BIM blades for heavy-duty cutting of hardwood and metal, HCS blades for general wood cutting/HSS blades for hardwood, metal and plastic cutting.
  • [Widely Applicable]: T-shank design fits BOSCH and DEWALT jig saws, Fits most jig saw models.
  • Low profile front Clamps allow a greater range of placement.Friction fit cut indicator doesn't require tools to adjust or lock in place.Secure - 3 points of contact means your saw is held securely while cutting.Replaces Bora saw plate - 542006
  • New side stop allows you to replace the tool in exactly the same place, every time
  • Improved Front fence minimizes side to side tool movement
  • Versatile - Fits right- and left-handed circular saws
  • Works with the Bora WTX Clamp edges and Bora NGX clamp edges
  • The charger is designed to operate on standard 120V household electrical power. Do not attempt to use it on any other voltage. This does not apply to the vehicular charger
  • Ergonomic handle delivers comfort and control. Tool Height-6.5 inch
  • 1/2-inch single sleeve ratcheting chuck provides tight bit gripping strength
  • High speed transmission of Dewalt 20V drill delivers 2 speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applications
  • High performance motor of the power drill delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
  • Dewalt drill has compact and lightweight design that fits into tight areas

More Info

Bosch 2608631964 Jigsaw Blade"T118A" 100 Pcs

Search only BOSCH brand name
Bosch 2608631964 Jigsaw Blade

Current price: 113 USD


Check price and availability


Height: 9.84 Inches

Length: 17.72 Inches

Width: 15.75 Inches

Weight: 1.054 Pounds

  • 🇺🇸 Use this UHMW to make jigs and fixtures for your table saw , router table, etc. Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, band saw or router table. Length of bar may vary slightly.MADE IN THE USA!
  • 🇺🇸 UHMW (Ultra High Molecular Weight) Polymer (plastic) is a linear polyethylene material with a molecular weight in the range of 3,000,000 to 6,000,000. UHMW is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use.
  • 🇺🇸 Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 Its also very slick in comparison to wood and other plastics. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 The idea behind using UHMW material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics. This makes it ideal for sleds where repetitive sliding happens regularly
  • Equipped with the patented turn-n-lock technology allowing for fast tool-free guide Bushing and router attachment exchanges
  • Bonus 13" Offset base provides added stability when finishing the edges on your work piece using your router, oversized handle knob is easy to grip providing superior control of your router
  • Both the small and large circle jigs quickly and easily attach to the included turn-n-lock circle guide head
  • Both the small and large circle jigs have built in metric and imperial scales, with an easy readout window for setting the diameter of both your inside and outside cuts
  • Small circle Jig cuts circles from 1. 5" To 12" In diameter; Large circle Jig cuts circles from 10" To 52" In diameter
  • [Durable box]: Each jig saw blade is put in a separate box, which is very durable。
  • [Wood and Metal ]: 25-Piece Set includes (T101B / T101A0 / T144D) blades for wood, straight and very fast cuts. (T118A / T118B ) blades for Thin Sheet Metal Steel, Aluminum and fast cuts. (T123XF / T345XF ) blades for heavy-duty cuts in hardwoods and metal.
  • [Fast Cutting]: They provide Curved for efficiency Cuts, Rapid Cuts and Plunge Cuts in Hard and Soft Woods, Thin Sheet Metal Steel, plastic and metal.
  • [High Material]: HCS and HSS for enhanced quality and precise cuts. BIM blades for heavy-duty cutting of hardwood and metal, HCS blades for general wood cutting/HSS blades for hardwood, metal and plastic cutting.
  • [Widely Applicable]: T-shank design fits BOSCH and DEWALT jig saws, Fits most jig saw models.
  • Low profile front Clamps allow a greater range of placement.Friction fit cut indicator doesn't require tools to adjust or lock in place.Secure - 3 points of contact means your saw is held securely while cutting.Replaces Bora saw plate - 542006
  • New side stop allows you to replace the tool in exactly the same place, every time
  • Improved Front fence minimizes side to side tool movement
  • Versatile - Fits right- and left-handed circular saws
  • Works with the Bora WTX Clamp edges and Bora NGX clamp edges
  • The charger is designed to operate on standard 120V household electrical power. Do not attempt to use it on any other voltage. This does not apply to the vehicular charger
  • Ergonomic handle delivers comfort and control. Tool Height-6.5 inch
  • 1/2-inch single sleeve ratcheting chuck provides tight bit gripping strength
  • High speed transmission of Dewalt 20V drill delivers 2 speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applications
  • High performance motor of the power drill delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
  • Dewalt drill has compact and lightweight design that fits into tight areas
  • Material: HSS
  • Content: 100 pcs
  • Tooth design: corrugated/milled

More Info

TAROSE 30-Piece T101AO 3-1/4 Inch 20 TPI Assorted T-Shank Scrolling Jig Saw Blades Set for Clean Cutting Wood

Search only TAROSE brand name
TAROSE 30-Piece T101AO 3-1/4 Inch 20 TPI Assorted T-Shank Scrolling Jig Saw Blades Set for Clean Cutting Wood

Current price: 16.99 USD


Check price and availability


  • 🇺🇸 Use this UHMW to make jigs and fixtures for your table saw , router table, etc. Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, band saw or router table. Length of bar may vary slightly.MADE IN THE USA!
  • 🇺🇸 UHMW (Ultra High Molecular Weight) Polymer (plastic) is a linear polyethylene material with a molecular weight in the range of 3,000,000 to 6,000,000. UHMW is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use.
  • 🇺🇸 Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 Its also very slick in comparison to wood and other plastics. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 The idea behind using UHMW material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics. This makes it ideal for sleds where repetitive sliding happens regularly
  • Equipped with the patented turn-n-lock technology allowing for fast tool-free guide Bushing and router attachment exchanges
  • Bonus 13" Offset base provides added stability when finishing the edges on your work piece using your router, oversized handle knob is easy to grip providing superior control of your router
  • Both the small and large circle jigs quickly and easily attach to the included turn-n-lock circle guide head
  • Both the small and large circle jigs have built in metric and imperial scales, with an easy readout window for setting the diameter of both your inside and outside cuts
  • Small circle Jig cuts circles from 1. 5" To 12" In diameter; Large circle Jig cuts circles from 10" To 52" In diameter
  • [Durable box]: Each jig saw blade is put in a separate box, which is very durable。
  • [Wood and Metal ]: 25-Piece Set includes (T101B / T101A0 / T144D) blades for wood, straight and very fast cuts. (T118A / T118B ) blades for Thin Sheet Metal Steel, Aluminum and fast cuts. (T123XF / T345XF ) blades for heavy-duty cuts in hardwoods and metal.
  • [Fast Cutting]: They provide Curved for efficiency Cuts, Rapid Cuts and Plunge Cuts in Hard and Soft Woods, Thin Sheet Metal Steel, plastic and metal.
  • [High Material]: HCS and HSS for enhanced quality and precise cuts. BIM blades for heavy-duty cutting of hardwood and metal, HCS blades for general wood cutting/HSS blades for hardwood, metal and plastic cutting.
  • [Widely Applicable]: T-shank design fits BOSCH and DEWALT jig saws, Fits most jig saw models.
  • Low profile front Clamps allow a greater range of placement.Friction fit cut indicator doesn't require tools to adjust or lock in place.Secure - 3 points of contact means your saw is held securely while cutting.Replaces Bora saw plate - 542006
  • New side stop allows you to replace the tool in exactly the same place, every time
  • Improved Front fence minimizes side to side tool movement
  • Versatile - Fits right- and left-handed circular saws
  • Works with the Bora WTX Clamp edges and Bora NGX clamp edges
  • The charger is designed to operate on standard 120V household electrical power. Do not attempt to use it on any other voltage. This does not apply to the vehicular charger
  • Ergonomic handle delivers comfort and control. Tool Height-6.5 inch
  • 1/2-inch single sleeve ratcheting chuck provides tight bit gripping strength
  • High speed transmission of Dewalt 20V drill delivers 2 speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applications
  • High performance motor of the power drill delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
  • Dewalt drill has compact and lightweight design that fits into tight areas
  • Material: HSS
  • Content: 100 pcs
  • Tooth design: corrugated/milled
  • 30 piece set
  • Includes plastic case for convenient storage
  • 3-1/4 inch overall length, 2-1/4 inch length of knife edge, 20 teeth per inch. Clean for wood, straight, fine cuts
  • Made with thick gauge high-carbon steel for maximum life in wood material for clean cuts. High-Quality manufacturing to provide superior wear tolerance and life.
  • T-shank design compatible with over 90% of current jigsaws including Bosch, DEWALT, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jig saws

More Info

BLACK+DECKER Jigsaw Blades Set, Assorted, Wood and Metal, 24-Pack (75-626)

Search only BLACK+DECKER brand name
BLACK+DECKER Jigsaw Blades Set, Assorted, Wood and Metal, 24-Pack (75-626)

Current price: 16.17 USD

Saving: $3.31 (17%)


Check price and availability


Height: 2.88 Inches

Length: 5.25 Inches

Width: 0.63 Inches

Weight: 2 Pounds

Warranty: No warranty

  • 🇺🇸 Use this UHMW to make jigs and fixtures for your table saw , router table, etc. Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, band saw or router table. Length of bar may vary slightly.MADE IN THE USA!
  • 🇺🇸 UHMW (Ultra High Molecular Weight) Polymer (plastic) is a linear polyethylene material with a molecular weight in the range of 3,000,000 to 6,000,000. UHMW is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use.
  • 🇺🇸 Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 Its also very slick in comparison to wood and other plastics. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 The idea behind using UHMW material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics. This makes it ideal for sleds where repetitive sliding happens regularly
  • Equipped with the patented turn-n-lock technology allowing for fast tool-free guide Bushing and router attachment exchanges
  • Bonus 13" Offset base provides added stability when finishing the edges on your work piece using your router, oversized handle knob is easy to grip providing superior control of your router
  • Both the small and large circle jigs quickly and easily attach to the included turn-n-lock circle guide head
  • Both the small and large circle jigs have built in metric and imperial scales, with an easy readout window for setting the diameter of both your inside and outside cuts
  • Small circle Jig cuts circles from 1. 5" To 12" In diameter; Large circle Jig cuts circles from 10" To 52" In diameter
  • [Durable box]: Each jig saw blade is put in a separate box, which is very durable。
  • [Wood and Metal ]: 25-Piece Set includes (T101B / T101A0 / T144D) blades for wood, straight and very fast cuts. (T118A / T118B ) blades for Thin Sheet Metal Steel, Aluminum and fast cuts. (T123XF / T345XF ) blades for heavy-duty cuts in hardwoods and metal.
  • [Fast Cutting]: They provide Curved for efficiency Cuts, Rapid Cuts and Plunge Cuts in Hard and Soft Woods, Thin Sheet Metal Steel, plastic and metal.
  • [High Material]: HCS and HSS for enhanced quality and precise cuts. BIM blades for heavy-duty cutting of hardwood and metal, HCS blades for general wood cutting/HSS blades for hardwood, metal and plastic cutting.
  • [Widely Applicable]: T-shank design fits BOSCH and DEWALT jig saws, Fits most jig saw models.
  • Low profile front Clamps allow a greater range of placement.Friction fit cut indicator doesn't require tools to adjust or lock in place.Secure - 3 points of contact means your saw is held securely while cutting.Replaces Bora saw plate - 542006
  • New side stop allows you to replace the tool in exactly the same place, every time
  • Improved Front fence minimizes side to side tool movement
  • Versatile - Fits right- and left-handed circular saws
  • Works with the Bora WTX Clamp edges and Bora NGX clamp edges
  • The charger is designed to operate on standard 120V household electrical power. Do not attempt to use it on any other voltage. This does not apply to the vehicular charger
  • Ergonomic handle delivers comfort and control. Tool Height-6.5 inch
  • 1/2-inch single sleeve ratcheting chuck provides tight bit gripping strength
  • High speed transmission of Dewalt 20V drill delivers 2 speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applications
  • High performance motor of the power drill delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
  • Dewalt drill has compact and lightweight design that fits into tight areas
  • Material: HSS
  • Content: 100 pcs
  • Tooth design: corrugated/milled
  • 30 piece set
  • Includes plastic case for convenient storage
  • 3-1/4 inch overall length, 2-1/4 inch length of knife edge, 20 teeth per inch. Clean for wood, straight, fine cuts
  • Made with thick gauge high-carbon steel for maximum life in wood material for clean cuts. High-Quality manufacturing to provide superior wear tolerance and life.
  • T-shank design compatible with over 90% of current jigsaws including Bosch, DEWALT, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jig saws
  • U-shank style blade without holes
  • Wood cutting blades are general purpose
  • Metal blades are for cutting in metal, aluminum and non-ferrous metal
  • Scrolling blades ideal for intricate cutting in wood

More Info

Thin Rip Jig Table Saw Jig to Make Repetitive Narrow Strip Cuts on Table Saws and Also Works with Router Tables and Band Saws

Search only Peachtree Woodworking Supply brand name
Thin Rip Jig Table Saw Jig to Make Repetitive Narrow Strip Cuts on Table Saws and Also Works with Router Tables and Band Saws

Current price: 24.99 USD

Saving: $10.00 (29%)


Check price and availability


Height: 3.25 Inches

Length: 8.5 Inches

Width: 5.2 Inches

Weight: 1.25 Pounds

  • 🇺🇸 Use this UHMW to make jigs and fixtures for your table saw , router table, etc. Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, band saw or router table. Length of bar may vary slightly.MADE IN THE USA!
  • 🇺🇸 UHMW (Ultra High Molecular Weight) Polymer (plastic) is a linear polyethylene material with a molecular weight in the range of 3,000,000 to 6,000,000. UHMW is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use.
  • 🇺🇸 Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 Its also very slick in comparison to wood and other plastics. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 The idea behind using UHMW material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics. This makes it ideal for sleds where repetitive sliding happens regularly
  • Equipped with the patented turn-n-lock technology allowing for fast tool-free guide Bushing and router attachment exchanges
  • Bonus 13" Offset base provides added stability when finishing the edges on your work piece using your router, oversized handle knob is easy to grip providing superior control of your router
  • Both the small and large circle jigs quickly and easily attach to the included turn-n-lock circle guide head
  • Both the small and large circle jigs have built in metric and imperial scales, with an easy readout window for setting the diameter of both your inside and outside cuts
  • Small circle Jig cuts circles from 1. 5" To 12" In diameter; Large circle Jig cuts circles from 10" To 52" In diameter
  • [Durable box]: Each jig saw blade is put in a separate box, which is very durable。
  • [Wood and Metal ]: 25-Piece Set includes (T101B / T101A0 / T144D) blades for wood, straight and very fast cuts. (T118A / T118B ) blades for Thin Sheet Metal Steel, Aluminum and fast cuts. (T123XF / T345XF ) blades for heavy-duty cuts in hardwoods and metal.
  • [Fast Cutting]: They provide Curved for efficiency Cuts, Rapid Cuts and Plunge Cuts in Hard and Soft Woods, Thin Sheet Metal Steel, plastic and metal.
  • [High Material]: HCS and HSS for enhanced quality and precise cuts. BIM blades for heavy-duty cutting of hardwood and metal, HCS blades for general wood cutting/HSS blades for hardwood, metal and plastic cutting.
  • [Widely Applicable]: T-shank design fits BOSCH and DEWALT jig saws, Fits most jig saw models.
  • Low profile front Clamps allow a greater range of placement.Friction fit cut indicator doesn't require tools to adjust or lock in place.Secure - 3 points of contact means your saw is held securely while cutting.Replaces Bora saw plate - 542006
  • New side stop allows you to replace the tool in exactly the same place, every time
  • Improved Front fence minimizes side to side tool movement
  • Versatile - Fits right- and left-handed circular saws
  • Works with the Bora WTX Clamp edges and Bora NGX clamp edges
  • The charger is designed to operate on standard 120V household electrical power. Do not attempt to use it on any other voltage. This does not apply to the vehicular charger
  • Ergonomic handle delivers comfort and control. Tool Height-6.5 inch
  • 1/2-inch single sleeve ratcheting chuck provides tight bit gripping strength
  • High speed transmission of Dewalt 20V drill delivers 2 speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applications
  • High performance motor of the power drill delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
  • Dewalt drill has compact and lightweight design that fits into tight areas
  • Material: HSS
  • Content: 100 pcs
  • Tooth design: corrugated/milled
  • 30 piece set
  • Includes plastic case for convenient storage
  • 3-1/4 inch overall length, 2-1/4 inch length of knife edge, 20 teeth per inch. Clean for wood, straight, fine cuts
  • Made with thick gauge high-carbon steel for maximum life in wood material for clean cuts. High-Quality manufacturing to provide superior wear tolerance and life.
  • T-shank design compatible with over 90% of current jigsaws including Bosch, DEWALT, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jig saws
  • U-shank style blade without holes
  • Wood cutting blades are general purpose
  • Metal blades are for cutting in metal, aluminum and non-ferrous metal
  • Scrolling blades ideal for intricate cutting in wood
  • The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through.
  • The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.
  • Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured.
  • The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.
  • Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.

More Info

POWERTEC 71403 Table Saw Cross Cutting Sled, Woodworking Jig and Hardware Kit for Precise Cuts

Search only POWERTEC brand name
POWERTEC 71403 Table Saw Cross Cutting Sled, Woodworking Jig and Hardware Kit for Precise Cuts

Current price: 129.99 USD

Saving: $46.00 (26%)


Check price and availability


Height: 3.55 Inches

Length: 24.8 Inches

Width: 24.02 Inches

  • 🇺🇸 Use this UHMW to make jigs and fixtures for your table saw , router table, etc. Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, band saw or router table. Length of bar may vary slightly.MADE IN THE USA!
  • 🇺🇸 UHMW (Ultra High Molecular Weight) Polymer (plastic) is a linear polyethylene material with a molecular weight in the range of 3,000,000 to 6,000,000. UHMW is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use.
  • 🇺🇸 Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 Its also very slick in comparison to wood and other plastics. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
  • 🇺🇸 The idea behind using UHMW material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics. This makes it ideal for sleds where repetitive sliding happens regularly
  • Equipped with the patented turn-n-lock technology allowing for fast tool-free guide Bushing and router attachment exchanges
  • Bonus 13" Offset base provides added stability when finishing the edges on your work piece using your router, oversized handle knob is easy to grip providing superior control of your router
  • Both the small and large circle jigs quickly and easily attach to the included turn-n-lock circle guide head
  • Both the small and large circle jigs have built in metric and imperial scales, with an easy readout window for setting the diameter of both your inside and outside cuts
  • Small circle Jig cuts circles from 1. 5" To 12" In diameter; Large circle Jig cuts circles from 10" To 52" In diameter
  • [Durable box]: Each jig saw blade is put in a separate box, which is very durable。
  • [Wood and Metal ]: 25-Piece Set includes (T101B / T101A0 / T144D) blades for wood, straight and very fast cuts. (T118A / T118B ) blades for Thin Sheet Metal Steel, Aluminum and fast cuts. (T123XF / T345XF ) blades for heavy-duty cuts in hardwoods and metal.
  • [Fast Cutting]: They provide Curved for efficiency Cuts, Rapid Cuts and Plunge Cuts in Hard and Soft Woods, Thin Sheet Metal Steel, plastic and metal.
  • [High Material]: HCS and HSS for enhanced quality and precise cuts. BIM blades for heavy-duty cutting of hardwood and metal, HCS blades for general wood cutting/HSS blades for hardwood, metal and plastic cutting.
  • [Widely Applicable]: T-shank design fits BOSCH and DEWALT jig saws, Fits most jig saw models.
  • Low profile front Clamps allow a greater range of placement.Friction fit cut indicator doesn't require tools to adjust or lock in place.Secure - 3 points of contact means your saw is held securely while cutting.Replaces Bora saw plate - 542006
  • New side stop allows you to replace the tool in exactly the same place, every time
  • Improved Front fence minimizes side to side tool movement
  • Versatile - Fits right- and left-handed circular saws
  • Works with the Bora WTX Clamp edges and Bora NGX clamp edges
  • The charger is designed to operate on standard 120V household electrical power. Do not attempt to use it on any other voltage. This does not apply to the vehicular charger
  • Ergonomic handle delivers comfort and control. Tool Height-6.5 inch
  • 1/2-inch single sleeve ratcheting chuck provides tight bit gripping strength
  • High speed transmission of Dewalt 20V drill delivers 2 speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applications
  • High performance motor of the power drill delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
  • Dewalt drill has compact and lightweight design that fits into tight areas
  • Material: HSS
  • Content: 100 pcs
  • Tooth design: corrugated/milled
  • 30 piece set
  • Includes plastic case for convenient storage
  • 3-1/4 inch overall length, 2-1/4 inch length of knife edge, 20 teeth per inch. Clean for wood, straight, fine cuts
  • Made with thick gauge high-carbon steel for maximum life in wood material for clean cuts. High-Quality manufacturing to provide superior wear tolerance and life.
  • T-shank design compatible with over 90% of current jigsaws including Bosch, DEWALT, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jig saws
  • U-shank style blade without holes
  • Wood cutting blades are general purpose
  • Metal blades are for cutting in metal, aluminum and non-ferrous metal
  • Scrolling blades ideal for intricate cutting in wood
  • The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through.
  • The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.
  • Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured.
  • The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.
  • Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.
  • PREMIUM DESIGN: Provides a large smooth sliding worksurface with an easy to read, accurate scale that produces high precision miters and repeatable crosscuts for table saw applications
  • ULTIMATE WOODWORKING JIG: Produces quicker, safer cuts for edge and detailing work projects requiring degree accuracy - Supports the material and holds it still for a perfect right angle cut.
  • HIGH PRECISION CUTS: Complete with an integrated angled ruler to ensure you get the desired cut with accurate measurements
  • FEATURES: Easy to read 1/2° graduations, a hairline indicator for mistake free tablesaw setups, right edge zero clearance, and simplistic design for a quick and easy installation
  • INCLUDES: Crosscut Table Saw Sled kit comes with table base, MDF fence face, fence, flip stop, hold down clamp, miter bar and installation hardware to give you everything you need to begin producing precise cuts right out of the box

More Info

1    2    3    4    5    6    7    8    9    10