Wonderful Insulation Resistance Meters. Reviews August, 2021, page 7

Megger MIT515-US Insulation Tester, 10 Teraohms Resistance, 5kV Multi-Range Test Voltage

More from Industrial & Scientific
Search only Megger brand name
Megger MIT515-US Insulation Tester, 10 Teraohms Resistance, 5kV Multi-Range Test Voltage

Current price: 3692.99 USD


Check price and availability


Weight: 1 Pounds

  • Safety rated to European Standard 61010-1 Category IV, 600V and is rated to IP65 to be dust-tight and protected against jets of water
  • Measures insulation resistance from 10 kilohms to 10 teraohms, voltage from 30 to 660V AC/DC, current from 0.01nA to 6mA, and capacitance from 10nF to 25 microfarads
  • Memory includes time/date stamping of results and data logging
  • Multiranging digital meter performs timed IR, PI, and DAR
  • Insulation resistance meter measures voltage, current, capacitance, and insulation resistance in high-voltage electrical equipment

More Info

GQ GMC-500Plus Nuclear Radiation Detector Monitor Dosimeter

More from Industrial & Scientific
Search only GQ brand name
GQ GMC-500Plus Nuclear Radiation Detector Monitor Dosimeter

Current price: 119.98 USD


Check price and availability


Weight: 0.11 Pounds

  • Safety rated to European Standard 61010-1 Category IV, 600V and is rated to IP65 to be dust-tight and protected against jets of water
  • Measures insulation resistance from 10 kilohms to 10 teraohms, voltage from 30 to 660V AC/DC, current from 0.01nA to 6mA, and capacitance from 10nF to 25 microfarads
  • Memory includes time/date stamping of results and data logging
  • Multiranging digital meter performs timed IR, PI, and DAR
  • Insulation resistance meter measures voltage, current, capacitance, and insulation resistance in high-voltage electrical equipment
  • NOTE: The “Plus” word is for software/firmware name. GMC-500 and GMC-500Plus have same appearance, but difference on software design. The opening screen of the GMC clearly shows the software name, either “GMC-500” or “GMC-500+”
  • Large lcd display with auto horizontal and vertical large font display
  • Push the detection range upper limit 10 times higher. GMC data viewer iOS App
  • Year 2017 model, dual geiger tubes sensor, independent calibration factors

More Info

Etekcity Digital Multimeter, Voltage Tester Volt Ohm Amp Meter with Continuity, Diode and Resistance Test, Dual Fused for Anti-Burn, Red, MSR-R500

More from Industrial & Scientific
Search only Etekcity brand name
Etekcity Digital Multimeter, Voltage Tester Volt Ohm Amp Meter with Continuity, Diode and Resistance Test, Dual Fused for Anti-Burn, Red, MSR-R500

Current price: 10.49 USD

Saving: $2.00 (16%)


Check price and availability


Height: 1.4 Inches

Length: 5.1 Inches

Width: 2.9 Inches

Weight: 0.5 Pounds

Warranty: 2-YEAR WARRANTY: 1-year buyer assurance (with a free option to extend it by 1 more year), and lifetime support from Etekcity

  • Safety rated to European Standard 61010-1 Category IV, 600V and is rated to IP65 to be dust-tight and protected against jets of water
  • Measures insulation resistance from 10 kilohms to 10 teraohms, voltage from 30 to 660V AC/DC, current from 0.01nA to 6mA, and capacitance from 10nF to 25 microfarads
  • Memory includes time/date stamping of results and data logging
  • Multiranging digital meter performs timed IR, PI, and DAR
  • Insulation resistance meter measures voltage, current, capacitance, and insulation resistance in high-voltage electrical equipment
  • NOTE: The “Plus” word is for software/firmware name. GMC-500 and GMC-500Plus have same appearance, but difference on software design. The opening screen of the GMC clearly shows the software name, either “GMC-500” or “GMC-500+”
  • Large lcd display with auto horizontal and vertical large font display
  • Push the detection range upper limit 10 times higher. GMC data viewer iOS App
  • Year 2017 model, dual geiger tubes sensor, independent calibration factors
  • NOTE: This multimeter cannot be used to test AC current. Please make sure the rotary switch is located at the right range during use
  • SAFETY PROTECTION: The multimeter has overload protection on all ranges and anti-burn with double fuses. Protective rubber sleeve around the multimeter adds extra drop protection
  • HANDY TROUBLESHOOTER: Data Hold button holds a reading; large backlit LCD with large digits is easily visible in dimly lit areas; Built-in support stand allows for hand free use; Low battery indication and Continuity buzzer
  • ACCURATELY MEASURES: This multimeter can test AC/DC Voltage, DC current (Not for AC current), Resistance, Diode, Continuity and More. Sampling Speed: 3 times per second

More Info

UEi Test Instruments DL369 Digital Clamp-On Meter

More from Industrial & Scientific
Search only UEi Test Instruments brand name
UEi Test Instruments DL369 Digital Clamp-On Meter

Current price: 76.46 USD


Check price and availability


Height: 8.7 inches

Length: 1.49 inches

Width: 2.98 inches

Weight: 0.040625 Pounds

Warranty: 3 year limited warranty

  • Safety rated to European Standard 61010-1 Category IV, 600V and is rated to IP65 to be dust-tight and protected against jets of water
  • Measures insulation resistance from 10 kilohms to 10 teraohms, voltage from 30 to 660V AC/DC, current from 0.01nA to 6mA, and capacitance from 10nF to 25 microfarads
  • Memory includes time/date stamping of results and data logging
  • Multiranging digital meter performs timed IR, PI, and DAR
  • Insulation resistance meter measures voltage, current, capacitance, and insulation resistance in high-voltage electrical equipment
  • NOTE: The “Plus” word is for software/firmware name. GMC-500 and GMC-500Plus have same appearance, but difference on software design. The opening screen of the GMC clearly shows the software name, either “GMC-500” or “GMC-500+”
  • Large lcd display with auto horizontal and vertical large font display
  • Push the detection range upper limit 10 times higher. GMC data viewer iOS App
  • Year 2017 model, dual geiger tubes sensor, independent calibration factors
  • NOTE: This multimeter cannot be used to test AC current. Please make sure the rotary switch is located at the right range during use
  • SAFETY PROTECTION: The multimeter has overload protection on all ranges and anti-burn with double fuses. Protective rubber sleeve around the multimeter adds extra drop protection
  • HANDY TROUBLESHOOTER: Data Hold button holds a reading; large backlit LCD with large digits is easily visible in dimly lit areas; Built-in support stand allows for hand free use; Low battery indication and Continuity buzzer
  • ACCURATELY MEASURES: This multimeter can test AC/DC Voltage, DC current (Not for AC current), Resistance, Diode, Continuity and More. Sampling Speed: 3 times per second
  • 40MΩ Resistance/Continuity, Frequency/Duty Cycle, Diode Test
  • Non-Contact Voltage, 400A AC, Min/Max
  • 750VAC/1000VDC, 4000μF Capacitance, 2000 μA AC/DC
  • Test lead storage
  • Digital Clamp-on Meter with Test Leads, Pouch

More Info

Fluke 1577 Insulation Multimeter, LCD Display, 600 Megaohm Resistance, 500/1000V Voltage

More from Industrial & Scientific
Search only Fluke brand name
Fluke 1577 Insulation Multimeter, LCD Display, 600 Megaohm Resistance, 500/1000V Voltage

Current price: 683.99 USD

Saving: $76.00 (10%)


Check price and availability


Height: 7.992 Inches

Length: 1.969 Inches

Width: 3.937 Inches

Weight: 2.20462262 Pounds

Warranty: Three years warranty

  • Safety rated to European Standard 61010-1 Category IV, 600V and is rated to IP65 to be dust-tight and protected against jets of water
  • Measures insulation resistance from 10 kilohms to 10 teraohms, voltage from 30 to 660V AC/DC, current from 0.01nA to 6mA, and capacitance from 10nF to 25 microfarads
  • Memory includes time/date stamping of results and data logging
  • Multiranging digital meter performs timed IR, PI, and DAR
  • Insulation resistance meter measures voltage, current, capacitance, and insulation resistance in high-voltage electrical equipment
  • NOTE: The “Plus” word is for software/firmware name. GMC-500 and GMC-500Plus have same appearance, but difference on software design. The opening screen of the GMC clearly shows the software name, either “GMC-500” or “GMC-500+”
  • Large lcd display with auto horizontal and vertical large font display
  • Push the detection range upper limit 10 times higher. GMC data viewer iOS App
  • Year 2017 model, dual geiger tubes sensor, independent calibration factors
  • NOTE: This multimeter cannot be used to test AC current. Please make sure the rotary switch is located at the right range during use
  • SAFETY PROTECTION: The multimeter has overload protection on all ranges and anti-burn with double fuses. Protective rubber sleeve around the multimeter adds extra drop protection
  • HANDY TROUBLESHOOTER: Data Hold button holds a reading; large backlit LCD with large digits is easily visible in dimly lit areas; Built-in support stand allows for hand free use; Low battery indication and Continuity buzzer
  • ACCURATELY MEASURES: This multimeter can test AC/DC Voltage, DC current (Not for AC current), Resistance, Diode, Continuity and More. Sampling Speed: 3 times per second
  • 40MΩ Resistance/Continuity, Frequency/Duty Cycle, Diode Test
  • Non-Contact Voltage, 400A AC, Min/Max
  • 750VAC/1000VDC, 4000μF Capacitance, 2000 μA AC/DC
  • Test lead storage
  • Digital Clamp-on Meter with Test Leads, Pouch
  • Safety ratings include Ingress Protection certified IP40; European Conformity (CE) marking; UL 61010 1; ANSI/ISA S82.01 2004; CAN/CSA C22.2 No. 1010.1:2004; IEC safety standards 61010 1:1002 and 61010.1 04, IEC61557 1; IEC61557 2; and IEC/EN 61010 1, 2nd edition for Category III installations up to 1000V and Category IV installations up to 600V, and Pollution Degree 2
  • Live circuit detection prevents insulation test when voltages over 30V are detected
  • Insulation test voltages of 550V and 1000V and insulation measurement range of 0.1 to 600 megaohms
  • True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveform
  • Manual and auto ranging digital insulation multi meter measures insulation resistance, current, voltage, and resistance for testing line insulation on motors, generators, cables, and switch gear

More Info

DUOYI DY5500 4 in 1 Multimeter Insulation Tester Earth Tester Voltmeter Phase Indicator

More from Industrial & Scientific
Search only DUOYI brand name
DUOYI DY5500 4 in 1 Multimeter Insulation Tester Earth Tester Voltmeter Phase Indicator

Current price: 219.99 USD


Check price and availability


  • Safety rated to European Standard 61010-1 Category IV, 600V and is rated to IP65 to be dust-tight and protected against jets of water
  • Measures insulation resistance from 10 kilohms to 10 teraohms, voltage from 30 to 660V AC/DC, current from 0.01nA to 6mA, and capacitance from 10nF to 25 microfarads
  • Memory includes time/date stamping of results and data logging
  • Multiranging digital meter performs timed IR, PI, and DAR
  • Insulation resistance meter measures voltage, current, capacitance, and insulation resistance in high-voltage electrical equipment
  • NOTE: The “Plus” word is for software/firmware name. GMC-500 and GMC-500Plus have same appearance, but difference on software design. The opening screen of the GMC clearly shows the software name, either “GMC-500” or “GMC-500+”
  • Large lcd display with auto horizontal and vertical large font display
  • Push the detection range upper limit 10 times higher. GMC data viewer iOS App
  • Year 2017 model, dual geiger tubes sensor, independent calibration factors
  • NOTE: This multimeter cannot be used to test AC current. Please make sure the rotary switch is located at the right range during use
  • SAFETY PROTECTION: The multimeter has overload protection on all ranges and anti-burn with double fuses. Protective rubber sleeve around the multimeter adds extra drop protection
  • HANDY TROUBLESHOOTER: Data Hold button holds a reading; large backlit LCD with large digits is easily visible in dimly lit areas; Built-in support stand allows for hand free use; Low battery indication and Continuity buzzer
  • ACCURATELY MEASURES: This multimeter can test AC/DC Voltage, DC current (Not for AC current), Resistance, Diode, Continuity and More. Sampling Speed: 3 times per second
  • 40MΩ Resistance/Continuity, Frequency/Duty Cycle, Diode Test
  • Non-Contact Voltage, 400A AC, Min/Max
  • 750VAC/1000VDC, 4000μF Capacitance, 2000 μA AC/DC
  • Test lead storage
  • Digital Clamp-on Meter with Test Leads, Pouch
  • Safety ratings include Ingress Protection certified IP40; European Conformity (CE) marking; UL 61010 1; ANSI/ISA S82.01 2004; CAN/CSA C22.2 No. 1010.1:2004; IEC safety standards 61010 1:1002 and 61010.1 04, IEC61557 1; IEC61557 2; and IEC/EN 61010 1, 2nd edition for Category III installations up to 1000V and Category IV installations up to 600V, and Pollution Degree 2
  • Live circuit detection prevents insulation test when voltages over 30V are detected
  • Insulation test voltages of 550V and 1000V and insulation measurement range of 0.1 to 600 megaohms
  • True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveform
  • Manual and auto ranging digital insulation multi meter measures insulation resistance, current, voltage, and resistance for testing line insulation on motors, generators, cables, and switch gear
  • AC voltage measurement to 600V
  • Auto ranging, data hold, LCD backlight
  • Check phase sequence and phase status
  • Test voltage 250V, 500V, 1000V
  • Ground resistance measurements from 0.01ohm to 2000ohms with 0.01ohm resolution

More Info

ALLOSUN Battery Internal Resistance Meter/Battery Voltage Tester/Digital Battery Analyzer CECOMINOD062345

More from Industrial & Scientific
Search only ALLOSUN brand name
ALLOSUN Battery Internal Resistance Meter/Battery Voltage Tester/Digital Battery Analyzer CECOMINOD062345

Current price: 51.98 USD


Check price and availability


  • Safety rated to European Standard 61010-1 Category IV, 600V and is rated to IP65 to be dust-tight and protected against jets of water
  • Measures insulation resistance from 10 kilohms to 10 teraohms, voltage from 30 to 660V AC/DC, current from 0.01nA to 6mA, and capacitance from 10nF to 25 microfarads
  • Memory includes time/date stamping of results and data logging
  • Multiranging digital meter performs timed IR, PI, and DAR
  • Insulation resistance meter measures voltage, current, capacitance, and insulation resistance in high-voltage electrical equipment
  • NOTE: The “Plus” word is for software/firmware name. GMC-500 and GMC-500Plus have same appearance, but difference on software design. The opening screen of the GMC clearly shows the software name, either “GMC-500” or “GMC-500+”
  • Large lcd display with auto horizontal and vertical large font display
  • Push the detection range upper limit 10 times higher. GMC data viewer iOS App
  • Year 2017 model, dual geiger tubes sensor, independent calibration factors
  • NOTE: This multimeter cannot be used to test AC current. Please make sure the rotary switch is located at the right range during use
  • SAFETY PROTECTION: The multimeter has overload protection on all ranges and anti-burn with double fuses. Protective rubber sleeve around the multimeter adds extra drop protection
  • HANDY TROUBLESHOOTER: Data Hold button holds a reading; large backlit LCD with large digits is easily visible in dimly lit areas; Built-in support stand allows for hand free use; Low battery indication and Continuity buzzer
  • ACCURATELY MEASURES: This multimeter can test AC/DC Voltage, DC current (Not for AC current), Resistance, Diode, Continuity and More. Sampling Speed: 3 times per second
  • 40MΩ Resistance/Continuity, Frequency/Duty Cycle, Diode Test
  • Non-Contact Voltage, 400A AC, Min/Max
  • 750VAC/1000VDC, 4000μF Capacitance, 2000 μA AC/DC
  • Test lead storage
  • Digital Clamp-on Meter with Test Leads, Pouch
  • Safety ratings include Ingress Protection certified IP40; European Conformity (CE) marking; UL 61010 1; ANSI/ISA S82.01 2004; CAN/CSA C22.2 No. 1010.1:2004; IEC safety standards 61010 1:1002 and 61010.1 04, IEC61557 1; IEC61557 2; and IEC/EN 61010 1, 2nd edition for Category III installations up to 1000V and Category IV installations up to 600V, and Pollution Degree 2
  • Live circuit detection prevents insulation test when voltages over 30V are detected
  • Insulation test voltages of 550V and 1000V and insulation measurement range of 0.1 to 600 megaohms
  • True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveform
  • Manual and auto ranging digital insulation multi meter measures insulation resistance, current, voltage, and resistance for testing line insulation on motors, generators, cables, and switch gear
  • AC voltage measurement to 600V
  • Auto ranging, data hold, LCD backlight
  • Check phase sequence and phase status
  • Test voltage 250V, 500V, 1000V
  • Ground resistance measurements from 0.01ohm to 2000ohms with 0.01ohm resolution
  • 5. Battery: 9V battery, 6F22 or equivalent, 1 piece (Not Provided by Seller)
  • 4. It is applicable for measurement of internal resistances of Lithium-ion, nickel-hydroxide, lithium-manganese cells or assembled battery.
  • 3. Adopt four-wire method which helps to ensure the accuracy of the measured value.
  • 2. It is mainly used to measure battery terminal voltage and internal resistance.
  • 1. Digital LCD display, easy to read the measurement result. With backlight, it makes it easy to read in low light areas.

More Info

Megger MIT420-EN Insulation Tester, 200 Gigaohms Resistance, 50V, 100V, 250V, 500V, 1000V Test Voltage with a NIST-Traceable Calibration Certificate with Data

More from Industrial & Scientific
Search only Megger brand name
Megger MIT420-EN Insulation Tester, 200 Gigaohms Resistance, 50V, 100V, 250V, 500V, 1000V Test Voltage with a NIST-Traceable Calibration Certificate with Data

Current price: 843.38 USD


Check price and availability


  • Safety rated to European Standard 61010-1 Category IV, 600V and is rated to IP65 to be dust-tight and protected against jets of water
  • Measures insulation resistance from 10 kilohms to 10 teraohms, voltage from 30 to 660V AC/DC, current from 0.01nA to 6mA, and capacitance from 10nF to 25 microfarads
  • Memory includes time/date stamping of results and data logging
  • Multiranging digital meter performs timed IR, PI, and DAR
  • Insulation resistance meter measures voltage, current, capacitance, and insulation resistance in high-voltage electrical equipment
  • NOTE: The “Plus” word is for software/firmware name. GMC-500 and GMC-500Plus have same appearance, but difference on software design. The opening screen of the GMC clearly shows the software name, either “GMC-500” or “GMC-500+”
  • Large lcd display with auto horizontal and vertical large font display
  • Push the detection range upper limit 10 times higher. GMC data viewer iOS App
  • Year 2017 model, dual geiger tubes sensor, independent calibration factors
  • NOTE: This multimeter cannot be used to test AC current. Please make sure the rotary switch is located at the right range during use
  • SAFETY PROTECTION: The multimeter has overload protection on all ranges and anti-burn with double fuses. Protective rubber sleeve around the multimeter adds extra drop protection
  • HANDY TROUBLESHOOTER: Data Hold button holds a reading; large backlit LCD with large digits is easily visible in dimly lit areas; Built-in support stand allows for hand free use; Low battery indication and Continuity buzzer
  • ACCURATELY MEASURES: This multimeter can test AC/DC Voltage, DC current (Not for AC current), Resistance, Diode, Continuity and More. Sampling Speed: 3 times per second
  • 40MΩ Resistance/Continuity, Frequency/Duty Cycle, Diode Test
  • Non-Contact Voltage, 400A AC, Min/Max
  • 750VAC/1000VDC, 4000μF Capacitance, 2000 μA AC/DC
  • Test lead storage
  • Digital Clamp-on Meter with Test Leads, Pouch
  • Safety ratings include Ingress Protection certified IP40; European Conformity (CE) marking; UL 61010 1; ANSI/ISA S82.01 2004; CAN/CSA C22.2 No. 1010.1:2004; IEC safety standards 61010 1:1002 and 61010.1 04, IEC61557 1; IEC61557 2; and IEC/EN 61010 1, 2nd edition for Category III installations up to 1000V and Category IV installations up to 600V, and Pollution Degree 2
  • Live circuit detection prevents insulation test when voltages over 30V are detected
  • Insulation test voltages of 550V and 1000V and insulation measurement range of 0.1 to 600 megaohms
  • True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveform
  • Manual and auto ranging digital insulation multi meter measures insulation resistance, current, voltage, and resistance for testing line insulation on motors, generators, cables, and switch gear
  • AC voltage measurement to 600V
  • Auto ranging, data hold, LCD backlight
  • Check phase sequence and phase status
  • Test voltage 250V, 500V, 1000V
  • Ground resistance measurements from 0.01ohm to 2000ohms with 0.01ohm resolution
  • 5. Battery: 9V battery, 6F22 or equivalent, 1 piece (Not Provided by Seller)
  • 4. It is applicable for measurement of internal resistances of Lithium-ion, nickel-hydroxide, lithium-manganese cells or assembled battery.
  • 3. Adopt four-wire method which helps to ensure the accuracy of the measured value.
  • 2. It is mainly used to measure battery terminal voltage and internal resistance.
  • 1. Digital LCD display, easy to read the measurement result. With backlight, it makes it easy to read in low light areas.
  • Safety rated to European Standard EN61010-1 Category IV, 600V and IP54 rated for protection against dust and splashing water
  • Voltage detection test inhibit function set at 50V for safety
  • Dual digital display with analog arc function to replicate response of analog meters
  • Autoranging digital meter with TRMS voltage detection
  • Insulation tester for testing insulation resistance, voltage, and continuity in electrical installations

More Info

DE-5000 Handheld LCR Meter

More from Industrial & Scientific
Search only DER EE ELECTRICAL INSTRUMENT brand name
DE-5000 Handheld LCR Meter

Current price: 114 USD


Check price and availability


Height: 2.066925 Inches

Length: 3.74015 Inches

Width: 7.40156 Inches

Weight: 0.992080179 Pounds

  • Safety rated to European Standard 61010-1 Category IV, 600V and is rated to IP65 to be dust-tight and protected against jets of water
  • Measures insulation resistance from 10 kilohms to 10 teraohms, voltage from 30 to 660V AC/DC, current from 0.01nA to 6mA, and capacitance from 10nF to 25 microfarads
  • Memory includes time/date stamping of results and data logging
  • Multiranging digital meter performs timed IR, PI, and DAR
  • Insulation resistance meter measures voltage, current, capacitance, and insulation resistance in high-voltage electrical equipment
  • NOTE: The “Plus” word is for software/firmware name. GMC-500 and GMC-500Plus have same appearance, but difference on software design. The opening screen of the GMC clearly shows the software name, either “GMC-500” or “GMC-500+”
  • Large lcd display with auto horizontal and vertical large font display
  • Push the detection range upper limit 10 times higher. GMC data viewer iOS App
  • Year 2017 model, dual geiger tubes sensor, independent calibration factors
  • NOTE: This multimeter cannot be used to test AC current. Please make sure the rotary switch is located at the right range during use
  • SAFETY PROTECTION: The multimeter has overload protection on all ranges and anti-burn with double fuses. Protective rubber sleeve around the multimeter adds extra drop protection
  • HANDY TROUBLESHOOTER: Data Hold button holds a reading; large backlit LCD with large digits is easily visible in dimly lit areas; Built-in support stand allows for hand free use; Low battery indication and Continuity buzzer
  • ACCURATELY MEASURES: This multimeter can test AC/DC Voltage, DC current (Not for AC current), Resistance, Diode, Continuity and More. Sampling Speed: 3 times per second
  • 40MΩ Resistance/Continuity, Frequency/Duty Cycle, Diode Test
  • Non-Contact Voltage, 400A AC, Min/Max
  • 750VAC/1000VDC, 4000μF Capacitance, 2000 μA AC/DC
  • Test lead storage
  • Digital Clamp-on Meter with Test Leads, Pouch
  • Safety ratings include Ingress Protection certified IP40; European Conformity (CE) marking; UL 61010 1; ANSI/ISA S82.01 2004; CAN/CSA C22.2 No. 1010.1:2004; IEC safety standards 61010 1:1002 and 61010.1 04, IEC61557 1; IEC61557 2; and IEC/EN 61010 1, 2nd edition for Category III installations up to 1000V and Category IV installations up to 600V, and Pollution Degree 2
  • Live circuit detection prevents insulation test when voltages over 30V are detected
  • Insulation test voltages of 550V and 1000V and insulation measurement range of 0.1 to 600 megaohms
  • True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveform
  • Manual and auto ranging digital insulation multi meter measures insulation resistance, current, voltage, and resistance for testing line insulation on motors, generators, cables, and switch gear
  • AC voltage measurement to 600V
  • Auto ranging, data hold, LCD backlight
  • Check phase sequence and phase status
  • Test voltage 250V, 500V, 1000V
  • Ground resistance measurements from 0.01ohm to 2000ohms with 0.01ohm resolution
  • 5. Battery: 9V battery, 6F22 or equivalent, 1 piece (Not Provided by Seller)
  • 4. It is applicable for measurement of internal resistances of Lithium-ion, nickel-hydroxide, lithium-manganese cells or assembled battery.
  • 3. Adopt four-wire method which helps to ensure the accuracy of the measured value.
  • 2. It is mainly used to measure battery terminal voltage and internal resistance.
  • 1. Digital LCD display, easy to read the measurement result. With backlight, it makes it easy to read in low light areas.
  • Safety rated to European Standard EN61010-1 Category IV, 600V and IP54 rated for protection against dust and splashing water
  • Voltage detection test inhibit function set at 50V for safety
  • Dual digital display with analog arc function to replicate response of analog meters
  • Autoranging digital meter with TRMS voltage detection
  • Insulation tester for testing insulation resistance, voltage, and continuity in electrical installations
  • Standard Accessories: English PDF manual, DC9V Battery, Alligator test lead case(TL-21), SMD Tweezers case(TL-22), Guard Line(TL-23),,,,, Option: IR to USB cace *It isn't included.
  • The "Sorting"mode could help the user to make a quick sort for a bunch of components.
  • Components could be measured in serial or parallel mode according to the DUT (device under test) impedance automatically.User could select the desired test frequencies of 100Hz/120Hz/1kHz/10kHz /100kHz.
  • This LCR Meter is fully auto ranging operation for AC impedance & DC resistance measurement. The user could measure the L/C/R components directly in “AUTO-LCR “ smart mode without selecting the function key.
  • This LCR Meter is a 19999/ 9999 counts dual display, high accuracy LCR meter, which could measure Inductance/ Capacitance/ Resistance with secondary parameters including dissipation factor (D), quality factor (Q), phase angle , equivalent series/ parallel resistance (ESR or Rp).

More Info

Hanchen Surface Resistance Tester Insulation Tester Megohmmeter Anti Static Tester Heavy Hammer Surface Resistance Measuring Instrument High Resistance Meter (Megohmmeter Test Kit)

More from Industrial & Scientific
Search only Hanchen brand name
Hanchen Surface Resistance Tester Insulation Tester Megohmmeter Anti Static Tester Heavy Hammer Surface Resistance Measuring Instrument High Resistance Meter (Megohmmeter Test Kit)

Current price: 668 USD


Check price and availability


  • Safety rated to European Standard 61010-1 Category IV, 600V and is rated to IP65 to be dust-tight and protected against jets of water
  • Measures insulation resistance from 10 kilohms to 10 teraohms, voltage from 30 to 660V AC/DC, current from 0.01nA to 6mA, and capacitance from 10nF to 25 microfarads
  • Memory includes time/date stamping of results and data logging
  • Multiranging digital meter performs timed IR, PI, and DAR
  • Insulation resistance meter measures voltage, current, capacitance, and insulation resistance in high-voltage electrical equipment
  • NOTE: The “Plus” word is for software/firmware name. GMC-500 and GMC-500Plus have same appearance, but difference on software design. The opening screen of the GMC clearly shows the software name, either “GMC-500” or “GMC-500+”
  • Large lcd display with auto horizontal and vertical large font display
  • Push the detection range upper limit 10 times higher. GMC data viewer iOS App
  • Year 2017 model, dual geiger tubes sensor, independent calibration factors
  • NOTE: This multimeter cannot be used to test AC current. Please make sure the rotary switch is located at the right range during use
  • SAFETY PROTECTION: The multimeter has overload protection on all ranges and anti-burn with double fuses. Protective rubber sleeve around the multimeter adds extra drop protection
  • HANDY TROUBLESHOOTER: Data Hold button holds a reading; large backlit LCD with large digits is easily visible in dimly lit areas; Built-in support stand allows for hand free use; Low battery indication and Continuity buzzer
  • ACCURATELY MEASURES: This multimeter can test AC/DC Voltage, DC current (Not for AC current), Resistance, Diode, Continuity and More. Sampling Speed: 3 times per second
  • 40MΩ Resistance/Continuity, Frequency/Duty Cycle, Diode Test
  • Non-Contact Voltage, 400A AC, Min/Max
  • 750VAC/1000VDC, 4000μF Capacitance, 2000 μA AC/DC
  • Test lead storage
  • Digital Clamp-on Meter with Test Leads, Pouch
  • Safety ratings include Ingress Protection certified IP40; European Conformity (CE) marking; UL 61010 1; ANSI/ISA S82.01 2004; CAN/CSA C22.2 No. 1010.1:2004; IEC safety standards 61010 1:1002 and 61010.1 04, IEC61557 1; IEC61557 2; and IEC/EN 61010 1, 2nd edition for Category III installations up to 1000V and Category IV installations up to 600V, and Pollution Degree 2
  • Live circuit detection prevents insulation test when voltages over 30V are detected
  • Insulation test voltages of 550V and 1000V and insulation measurement range of 0.1 to 600 megaohms
  • True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveform
  • Manual and auto ranging digital insulation multi meter measures insulation resistance, current, voltage, and resistance for testing line insulation on motors, generators, cables, and switch gear
  • AC voltage measurement to 600V
  • Auto ranging, data hold, LCD backlight
  • Check phase sequence and phase status
  • Test voltage 250V, 500V, 1000V
  • Ground resistance measurements from 0.01ohm to 2000ohms with 0.01ohm resolution
  • 5. Battery: 9V battery, 6F22 or equivalent, 1 piece (Not Provided by Seller)
  • 4. It is applicable for measurement of internal resistances of Lithium-ion, nickel-hydroxide, lithium-manganese cells or assembled battery.
  • 3. Adopt four-wire method which helps to ensure the accuracy of the measured value.
  • 2. It is mainly used to measure battery terminal voltage and internal resistance.
  • 1. Digital LCD display, easy to read the measurement result. With backlight, it makes it easy to read in low light areas.
  • Safety rated to European Standard EN61010-1 Category IV, 600V and IP54 rated for protection against dust and splashing water
  • Voltage detection test inhibit function set at 50V for safety
  • Dual digital display with analog arc function to replicate response of analog meters
  • Autoranging digital meter with TRMS voltage detection
  • Insulation tester for testing insulation resistance, voltage, and continuity in electrical installations
  • Standard Accessories: English PDF manual, DC9V Battery, Alligator test lead case(TL-21), SMD Tweezers case(TL-22), Guard Line(TL-23),,,,, Option: IR to USB cace *It isn't included.
  • The "Sorting"mode could help the user to make a quick sort for a bunch of components.
  • Components could be measured in serial or parallel mode according to the DUT (device under test) impedance automatically.User could select the desired test frequencies of 100Hz/120Hz/1kHz/10kHz /100kHz.
  • This LCR Meter is fully auto ranging operation for AC impedance & DC resistance measurement. The user could measure the L/C/R components directly in “AUTO-LCR “ smart mode without selecting the function key.
  • This LCR Meter is a 19999/ 9999 counts dual display, high accuracy LCR meter, which could measure Inductance/ Capacitance/ Resistance with secondary parameters including dissipation factor (D), quality factor (Q), phase angle , equivalent series/ parallel resistance (ESR or Rp).
  • 【ONE YEAR warranty】: We provide every our customer with ONE YEAR warranty.
  • 【LED indicators and fast results display】: clear and fast.
  • 【Standard parallel electrodes】: with standard parallel electrodes, this resistance meter is conveniently to be repeatedly used.
  • 【More indicators, more accurate results】: this resistance tester have wider measurement to make sure accurate testing results.
  • Complaint with EOS/ESD, CECC and ASTM test procedure.

More Info

1    2    3    4    5    6    7    8    9    10