Elegant Hex Keys. Reviews September, 2021, page 10

Bondhus 20599 0.050-3/8" & 1.5-10mm Stubby Ball End Hex Key DoublePK

Search only Bondhus brand name
Bondhus 20599 0.050-3/8

Current price: 22.72 USD


Check price and availability


Height: 1.02 Inches

Length: 11.6 Inches

Width: 6.2 Inches

Weight: 1.5 Pounds

Warranty: Lifetime

  • Lifetime warranty
  • ProGuard Finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time
  • Tools are Made in the USA with Bondhus proprietary Protanium steel and are up to 20 percent stronger than competitor tools
  • Low profile short arm reaches screws with low overhead clearance, that are inaccessible with any other type of hex tools
  • Angle entry up to 25 Degrees on sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8-Inch and 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm

More Info

EKLIND 10222 Hex L-Key allen wrench Combo- Long Inch / MM (2 sets 22pc)

Search only Eklind Tool Company brand name
EKLIND 10222 Hex L-Key allen wrench Combo- Long Inch / MM (2 sets 22pc)

Current price: 17.39 USD

Saving: $11.55 (40%)


Check price and availability


Height: 1 Inches

Length: 1 Inches

Width: 1 Inches

Weight: 1 Pounds

  • Lifetime warranty
  • ProGuard Finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time
  • Tools are Made in the USA with Bondhus proprietary Protanium steel and are up to 20 percent stronger than competitor tools
  • Low profile short arm reaches screws with low overhead clearance, that are inaccessible with any other type of hex tools
  • Angle entry up to 25 Degrees on sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8-Inch and 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm
  • MEETS OR EXCEEDS ALL APPLICABLE STANDARDS- EKLIND tools meet or go beyond the standard regulations set forth in ANSI, ASME, RoHS, REACH, CA Prop 65 and Dodd-Frank Conflict Minerals Legislation
  • KEEP YOUR KEYS ORGANIZED- A plastic holder firmly holds each key in a sized-marked hole so you always have the size you need at-hand
  • IDENTIFY YOUR TOOLS- Tools are color coded in red for inch sizes and blue for metric sizes so you can reach for the correct tool quickly
  • OPTIMUM STRENGTH- These EKLIND tools are made with EKLIND Alloy Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with a rust resistant finish
  • EKLIND hex keys (allen wrenches) are used to drive internal hexagon socket (allen head) fasteners
  • COMPLETE SAE / METRIC COMBINATION SET contains all common, popular INCH and MM Sizes. INCH Sizes:.050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, & 3/8 and MM sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10
  • MADE IN AMERICA- High quality, Industrial Grade Professional Tools made in the U.S.A.

More Info

B Bochamtec 16 PCS Hey Key Set and Allen Wrench Set T Handle Allen Wrench Set Hex Ball End with Case

Search only B BOCHAMTEC brand name
B Bochamtec 16 PCS Hey Key Set and Allen Wrench Set T Handle Allen Wrench Set Hex Ball End with Case

Current price: 24.99 USD


Check price and availability


  • Lifetime warranty
  • ProGuard Finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time
  • Tools are Made in the USA with Bondhus proprietary Protanium steel and are up to 20 percent stronger than competitor tools
  • Low profile short arm reaches screws with low overhead clearance, that are inaccessible with any other type of hex tools
  • Angle entry up to 25 Degrees on sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8-Inch and 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm
  • MEETS OR EXCEEDS ALL APPLICABLE STANDARDS- EKLIND tools meet or go beyond the standard regulations set forth in ANSI, ASME, RoHS, REACH, CA Prop 65 and Dodd-Frank Conflict Minerals Legislation
  • KEEP YOUR KEYS ORGANIZED- A plastic holder firmly holds each key in a sized-marked hole so you always have the size you need at-hand
  • IDENTIFY YOUR TOOLS- Tools are color coded in red for inch sizes and blue for metric sizes so you can reach for the correct tool quickly
  • OPTIMUM STRENGTH- These EKLIND tools are made with EKLIND Alloy Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with a rust resistant finish
  • EKLIND hex keys (allen wrenches) are used to drive internal hexagon socket (allen head) fasteners
  • COMPLETE SAE / METRIC COMBINATION SET contains all common, popular INCH and MM Sizes. INCH Sizes:.050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, & 3/8 and MM sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10
  • MADE IN AMERICA- High quality, Industrial Grade Professional Tools made in the U.S.A.
  • This high quality long reach hex key set is ideal for mechanics, engineers, DIY and garages, professional tool for commercial or occasional use
  • Corner end smoothly inserted into fastener head, reduce wear, equipped with a special receiving box, easy to store
  • P-handles are made from a durable nylon material and are ergonomically-designed for comfortable use.
  • Metric 8-Piece T-Handle Long Arm Ball End Hex Key Wrench, 8-PieceT-Handle Long Arm Star Key Wrench With a special hexagonal ball head
  • The hex wrenches are made from high quality Chrome vanadium steel material for long life.

More Info

STANLEY Hex Key Set, Long Arm, SAE & MM, 22-Piece (85-753)

Search only Stanley brand name
STANLEY Hex Key Set, Long Arm, SAE & MM, 22-Piece (85-753)

Current price: 24.03 USD

Saving: $4.21 (15%)


Check price and availability


Height: 9.842519675 Inches

Length: 7.2834645595 Inches

Width: 1.574803148 Inches

Weight: 0.95 Pounds

Warranty: Stanley warrants this product to the original purchaser for its useful life against deficiencies in material and workmanship. This LIMITED LIFETIME WARRANTY does not cover products that are improperly used, abused, altered or repaired. Deficient products will be replaced or repaired.

  • Lifetime warranty
  • ProGuard Finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time
  • Tools are Made in the USA with Bondhus proprietary Protanium steel and are up to 20 percent stronger than competitor tools
  • Low profile short arm reaches screws with low overhead clearance, that are inaccessible with any other type of hex tools
  • Angle entry up to 25 Degrees on sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8-Inch and 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm
  • MEETS OR EXCEEDS ALL APPLICABLE STANDARDS- EKLIND tools meet or go beyond the standard regulations set forth in ANSI, ASME, RoHS, REACH, CA Prop 65 and Dodd-Frank Conflict Minerals Legislation
  • KEEP YOUR KEYS ORGANIZED- A plastic holder firmly holds each key in a sized-marked hole so you always have the size you need at-hand
  • IDENTIFY YOUR TOOLS- Tools are color coded in red for inch sizes and blue for metric sizes so you can reach for the correct tool quickly
  • OPTIMUM STRENGTH- These EKLIND tools are made with EKLIND Alloy Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with a rust resistant finish
  • EKLIND hex keys (allen wrenches) are used to drive internal hexagon socket (allen head) fasteners
  • COMPLETE SAE / METRIC COMBINATION SET contains all common, popular INCH and MM Sizes. INCH Sizes:.050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, & 3/8 and MM sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10
  • MADE IN AMERICA- High quality, Industrial Grade Professional Tools made in the U.S.A.
  • This high quality long reach hex key set is ideal for mechanics, engineers, DIY and garages, professional tool for commercial or occasional use
  • Corner end smoothly inserted into fastener head, reduce wear, equipped with a special receiving box, easy to store
  • P-handles are made from a durable nylon material and are ergonomically-designed for comfortable use.
  • Metric 8-Piece T-Handle Long Arm Ball End Hex Key Wrench, 8-PieceT-Handle Long Arm Star Key Wrench With a special hexagonal ball head
  • The hex wrenches are made from high quality Chrome vanadium steel material for long life.
  • Backed by a limited lifetime warranty
  • Durable caddy keeps keys organized and has marked slots for each key
  • Black oxide finish resists rust
  • Chamfered hex key edges to give better fit and reduce stripped fasteners
  • Wrenches meet or exceed ANSI/ASME B18.3 specifications

More Info

Park Tool AWS-10 Fold-Up Hex Wrench Set

Search only Park Tool brand name
Park Tool AWS-10 Fold-Up Hex Wrench Set

Current price: 9.15 USD


Check price and availability


Height: 4.5 Inches

Length: 2 Inches

Width: 0.5 Inches

Weight: 0.22707612986 Pounds

  • Lifetime warranty
  • ProGuard Finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time
  • Tools are Made in the USA with Bondhus proprietary Protanium steel and are up to 20 percent stronger than competitor tools
  • Low profile short arm reaches screws with low overhead clearance, that are inaccessible with any other type of hex tools
  • Angle entry up to 25 Degrees on sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8-Inch and 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm
  • MEETS OR EXCEEDS ALL APPLICABLE STANDARDS- EKLIND tools meet or go beyond the standard regulations set forth in ANSI, ASME, RoHS, REACH, CA Prop 65 and Dodd-Frank Conflict Minerals Legislation
  • KEEP YOUR KEYS ORGANIZED- A plastic holder firmly holds each key in a sized-marked hole so you always have the size you need at-hand
  • IDENTIFY YOUR TOOLS- Tools are color coded in red for inch sizes and blue for metric sizes so you can reach for the correct tool quickly
  • OPTIMUM STRENGTH- These EKLIND tools are made with EKLIND Alloy Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with a rust resistant finish
  • EKLIND hex keys (allen wrenches) are used to drive internal hexagon socket (allen head) fasteners
  • COMPLETE SAE / METRIC COMBINATION SET contains all common, popular INCH and MM Sizes. INCH Sizes:.050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, & 3/8 and MM sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10
  • MADE IN AMERICA- High quality, Industrial Grade Professional Tools made in the U.S.A.
  • This high quality long reach hex key set is ideal for mechanics, engineers, DIY and garages, professional tool for commercial or occasional use
  • Corner end smoothly inserted into fastener head, reduce wear, equipped with a special receiving box, easy to store
  • P-handles are made from a durable nylon material and are ergonomically-designed for comfortable use.
  • Metric 8-Piece T-Handle Long Arm Ball End Hex Key Wrench, 8-PieceT-Handle Long Arm Star Key Wrench With a special hexagonal ball head
  • The hex wrenches are made from high quality Chrome vanadium steel material for long life.
  • Backed by a limited lifetime warranty
  • Durable caddy keeps keys organized and has marked slots for each key
  • Black oxide finish resists rust
  • Chamfered hex key edges to give better fit and reduce stripped fasteners
  • Wrenches meet or exceed ANSI/ASME B18.3 specifications
  • Chamfered tips for a perfect fit
  • Wrenches made from industrial tool steel, through hardened and tempered for long life
  • Includes 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, and 6mm hex wrenches

More Info

Klein Tools 70573 Grip-It 12 Key Hex Set - Inch/Metric , Blue , 6-Inch

Search only Klein Tools brand name
Klein Tools 70573 Grip-It 12 Key Hex Set - Inch/Metric , Blue , 6-Inch

Current price: 9.49 USD


Check price and availability


Height: 2 Inches

Length: 4 Inches

Width: 1.25 Inches

Weight: 0.3 Pounds

Warranty: 1 year manufacturer

  • Lifetime warranty
  • ProGuard Finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time
  • Tools are Made in the USA with Bondhus proprietary Protanium steel and are up to 20 percent stronger than competitor tools
  • Low profile short arm reaches screws with low overhead clearance, that are inaccessible with any other type of hex tools
  • Angle entry up to 25 Degrees on sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8-Inch and 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm
  • MEETS OR EXCEEDS ALL APPLICABLE STANDARDS- EKLIND tools meet or go beyond the standard regulations set forth in ANSI, ASME, RoHS, REACH, CA Prop 65 and Dodd-Frank Conflict Minerals Legislation
  • KEEP YOUR KEYS ORGANIZED- A plastic holder firmly holds each key in a sized-marked hole so you always have the size you need at-hand
  • IDENTIFY YOUR TOOLS- Tools are color coded in red for inch sizes and blue for metric sizes so you can reach for the correct tool quickly
  • OPTIMUM STRENGTH- These EKLIND tools are made with EKLIND Alloy Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with a rust resistant finish
  • EKLIND hex keys (allen wrenches) are used to drive internal hexagon socket (allen head) fasteners
  • COMPLETE SAE / METRIC COMBINATION SET contains all common, popular INCH and MM Sizes. INCH Sizes:.050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, & 3/8 and MM sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10
  • MADE IN AMERICA- High quality, Industrial Grade Professional Tools made in the U.S.A.
  • This high quality long reach hex key set is ideal for mechanics, engineers, DIY and garages, professional tool for commercial or occasional use
  • Corner end smoothly inserted into fastener head, reduce wear, equipped with a special receiving box, easy to store
  • P-handles are made from a durable nylon material and are ergonomically-designed for comfortable use.
  • Metric 8-Piece T-Handle Long Arm Ball End Hex Key Wrench, 8-PieceT-Handle Long Arm Star Key Wrench With a special hexagonal ball head
  • The hex wrenches are made from high quality Chrome vanadium steel material for long life.
  • Backed by a limited lifetime warranty
  • Durable caddy keeps keys organized and has marked slots for each key
  • Black oxide finish resists rust
  • Chamfered hex key edges to give better fit and reduce stripped fasteners
  • Wrenches meet or exceed ANSI/ASME B18.3 specifications
  • Chamfered tips for a perfect fit
  • Wrenches made from industrial tool steel, through hardened and tempered for long life
  • Includes 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, and 6mm hex wrenches
  • Two key positions (straight-out or right angle) for extra leverage
  • Holder serves as a handle
  • Hex-key ends are square-cut for a secure full-depth fit and maximum contact with the hex socket to prevent slippage and stripping of the socket
  • Tough, heat-treated alloy steel
  • Handy sets fit your pocket or tool box easily and help eliminate the lost-key problem

More Info

JOHNBEE Allen Wrench Set - Best Hex Key Wrench Set - Long Arm Ball End - 9 Piece (1.5-10 Mm) - Premium Quality Metric Allen Wrenches Set - Allen Key Set Box With Mini 10 in 1 Bike Wrench - Handy Tool

Search only JohnBee brand name
JOHNBEE Allen Wrench Set - Best Hex Key Wrench Set - Long Arm Ball End - 9 Piece (1.5-10 Mm) - Premium Quality Metric Allen Wrenches Set - Allen Key Set Box With Mini 10 in 1 Bike Wrench - Handy Tool

Current price: 6.88 USD

Saving: $3.11 (31%)


Check price and availability


  • Lifetime warranty
  • ProGuard Finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time
  • Tools are Made in the USA with Bondhus proprietary Protanium steel and are up to 20 percent stronger than competitor tools
  • Low profile short arm reaches screws with low overhead clearance, that are inaccessible with any other type of hex tools
  • Angle entry up to 25 Degrees on sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8-Inch and 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm
  • MEETS OR EXCEEDS ALL APPLICABLE STANDARDS- EKLIND tools meet or go beyond the standard regulations set forth in ANSI, ASME, RoHS, REACH, CA Prop 65 and Dodd-Frank Conflict Minerals Legislation
  • KEEP YOUR KEYS ORGANIZED- A plastic holder firmly holds each key in a sized-marked hole so you always have the size you need at-hand
  • IDENTIFY YOUR TOOLS- Tools are color coded in red for inch sizes and blue for metric sizes so you can reach for the correct tool quickly
  • OPTIMUM STRENGTH- These EKLIND tools are made with EKLIND Alloy Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with a rust resistant finish
  • EKLIND hex keys (allen wrenches) are used to drive internal hexagon socket (allen head) fasteners
  • COMPLETE SAE / METRIC COMBINATION SET contains all common, popular INCH and MM Sizes. INCH Sizes:.050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, & 3/8 and MM sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10
  • MADE IN AMERICA- High quality, Industrial Grade Professional Tools made in the U.S.A.
  • This high quality long reach hex key set is ideal for mechanics, engineers, DIY and garages, professional tool for commercial or occasional use
  • Corner end smoothly inserted into fastener head, reduce wear, equipped with a special receiving box, easy to store
  • P-handles are made from a durable nylon material and are ergonomically-designed for comfortable use.
  • Metric 8-Piece T-Handle Long Arm Ball End Hex Key Wrench, 8-PieceT-Handle Long Arm Star Key Wrench With a special hexagonal ball head
  • The hex wrenches are made from high quality Chrome vanadium steel material for long life.
  • Backed by a limited lifetime warranty
  • Durable caddy keeps keys organized and has marked slots for each key
  • Black oxide finish resists rust
  • Chamfered hex key edges to give better fit and reduce stripped fasteners
  • Wrenches meet or exceed ANSI/ASME B18.3 specifications
  • Chamfered tips for a perfect fit
  • Wrenches made from industrial tool steel, through hardened and tempered for long life
  • Includes 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, and 6mm hex wrenches
  • Two key positions (straight-out or right angle) for extra leverage
  • Holder serves as a handle
  • Hex-key ends are square-cut for a secure full-depth fit and maximum contact with the hex socket to prevent slippage and stripping of the socket
  • Tough, heat-treated alloy steel
  • Handy sets fit your pocket or tool box easily and help eliminate the lost-key problem
  • 【Highlight 5】Lifetime guarantee on the FANSTINOW Allen Wrench Set! If you have any question, please contact us.
  • 【Highlight 4】For installing towel bars, tightening door handles, or assembling furniture, allen wrenches are ideal for tight spots, easy to use case makes it simple to remove and replace even the tiniest wrenches.
  • 【Highlight 3】 A nice set with the allen wrench, package includes: 1 x "hex key wrench set 9-piece", 1 x "bicycle wrench 10 in 1".
  • 【Highlight 2】Customer said: The hex sex wrench is very solid. Long arm/short arm design offers extended reach on one end and extra leverage on the other - easy to read sizes marked on case for fast size selection.
  • 【Highlight 1】The best hex wrenches is well-made. chrome plated surface, waterproof and rustproof. high hardness, good toughness, long service life.

More Info

EKLIND 50914 Cushion Grip Hex T-Key allen wrench - 8 SAE 3/32-1/4 Inch & 6 Metric 2-6 MM Sizes (9In shaft)

Search only Eklind Tool brand name
EKLIND 50914 Cushion Grip Hex T-Key allen wrench - 8 SAE 3/32-1/4 Inch & 6 Metric 2-6 MM Sizes (9In shaft)

Current price: 27.11 USD


Check price and availability


Height: 3.3 Inches

Length: 11.9 Inches

Width: 4.4 Inches

Warranty: All Eklind products are warranted against defects in materials and workmanship. Any tool that is abused or misused is excluded from this warranty. Upon return of the product, our quality assurance department will assess the claim and the product will be replaced if it is covered by this warranty.

  • Lifetime warranty
  • ProGuard Finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time
  • Tools are Made in the USA with Bondhus proprietary Protanium steel and are up to 20 percent stronger than competitor tools
  • Low profile short arm reaches screws with low overhead clearance, that are inaccessible with any other type of hex tools
  • Angle entry up to 25 Degrees on sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8-Inch and 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm
  • MEETS OR EXCEEDS ALL APPLICABLE STANDARDS- EKLIND tools meet or go beyond the standard regulations set forth in ANSI, ASME, RoHS, REACH, CA Prop 65 and Dodd-Frank Conflict Minerals Legislation
  • KEEP YOUR KEYS ORGANIZED- A plastic holder firmly holds each key in a sized-marked hole so you always have the size you need at-hand
  • IDENTIFY YOUR TOOLS- Tools are color coded in red for inch sizes and blue for metric sizes so you can reach for the correct tool quickly
  • OPTIMUM STRENGTH- These EKLIND tools are made with EKLIND Alloy Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with a rust resistant finish
  • EKLIND hex keys (allen wrenches) are used to drive internal hexagon socket (allen head) fasteners
  • COMPLETE SAE / METRIC COMBINATION SET contains all common, popular INCH and MM Sizes. INCH Sizes:.050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, & 3/8 and MM sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10
  • MADE IN AMERICA- High quality, Industrial Grade Professional Tools made in the U.S.A.
  • This high quality long reach hex key set is ideal for mechanics, engineers, DIY and garages, professional tool for commercial or occasional use
  • Corner end smoothly inserted into fastener head, reduce wear, equipped with a special receiving box, easy to store
  • P-handles are made from a durable nylon material and are ergonomically-designed for comfortable use.
  • Metric 8-Piece T-Handle Long Arm Ball End Hex Key Wrench, 8-PieceT-Handle Long Arm Star Key Wrench With a special hexagonal ball head
  • The hex wrenches are made from high quality Chrome vanadium steel material for long life.
  • Backed by a limited lifetime warranty
  • Durable caddy keeps keys organized and has marked slots for each key
  • Black oxide finish resists rust
  • Chamfered hex key edges to give better fit and reduce stripped fasteners
  • Wrenches meet or exceed ANSI/ASME B18.3 specifications
  • Chamfered tips for a perfect fit
  • Wrenches made from industrial tool steel, through hardened and tempered for long life
  • Includes 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, and 6mm hex wrenches
  • Two key positions (straight-out or right angle) for extra leverage
  • Holder serves as a handle
  • Hex-key ends are square-cut for a secure full-depth fit and maximum contact with the hex socket to prevent slippage and stripping of the socket
  • Tough, heat-treated alloy steel
  • Handy sets fit your pocket or tool box easily and help eliminate the lost-key problem
  • 【Highlight 5】Lifetime guarantee on the FANSTINOW Allen Wrench Set! If you have any question, please contact us.
  • 【Highlight 4】For installing towel bars, tightening door handles, or assembling furniture, allen wrenches are ideal for tight spots, easy to use case makes it simple to remove and replace even the tiniest wrenches.
  • 【Highlight 3】 A nice set with the allen wrench, package includes: 1 x "hex key wrench set 9-piece", 1 x "bicycle wrench 10 in 1".
  • 【Highlight 2】Customer said: The hex sex wrench is very solid. Long arm/short arm design offers extended reach on one end and extra leverage on the other - easy to read sizes marked on case for fast size selection.
  • 【Highlight 1】The best hex wrenches is well-made. chrome plated surface, waterproof and rustproof. high hardness, good toughness, long service life.
  • Meets or exceeds all applicable standards- Eklind tools meet or go beyond the standard Regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-frank conflict minerals legislation
  • Identify your tools- tools are Color coded red for inch and blue for metric so you can reach for the correct tool quickly
  • Eklind tools cushion grip t-key- keys that have longer shafts to provide extra reach and leverage, the smooth vinyl handles are comfortable and slip resistance, they stack nicely and are organized in a pouch for compact storage, even in your tool box
  • Eklind Tool loop-style t-keys- keys that have longer shafts to provide extra reach and leverage, stack nicely and are organized in a pouch for compact storage, even in your tool box
  • Eklind Tool T-handle Hex key- you get extra reach and extra leverage with the keys' Longer shafts
  • Optimum strength- these Eklind tools are made with Eklind tools Alloy Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with a rust resistant finish
  • Eklind Tool hex keys (Allen wrenches) are used to drive internal hexagon socket (Allen head) fasteners
  • Contains inch sizes: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 & mm sizes: 2, 2. 5, 3, 4, 5, 6
  • Made in America- high quality, industrial grade professional tools Made in the U. S. A.

More Info

SEDY 22 Piece Mini Hex Key Allen Wrench Set - Hex/Torx, Metric/SAE (3-IN-ONE, Cr-V)

Search only SEDY brand name
SEDY 22 Piece Mini Hex Key Allen Wrench Set - Hex/Torx, Metric/SAE (3-IN-ONE, Cr-V)

Current price: 11.99 USD


Check price and availability


  • Lifetime warranty
  • ProGuard Finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time
  • Tools are Made in the USA with Bondhus proprietary Protanium steel and are up to 20 percent stronger than competitor tools
  • Low profile short arm reaches screws with low overhead clearance, that are inaccessible with any other type of hex tools
  • Angle entry up to 25 Degrees on sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8-Inch and 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm
  • MEETS OR EXCEEDS ALL APPLICABLE STANDARDS- EKLIND tools meet or go beyond the standard regulations set forth in ANSI, ASME, RoHS, REACH, CA Prop 65 and Dodd-Frank Conflict Minerals Legislation
  • KEEP YOUR KEYS ORGANIZED- A plastic holder firmly holds each key in a sized-marked hole so you always have the size you need at-hand
  • IDENTIFY YOUR TOOLS- Tools are color coded in red for inch sizes and blue for metric sizes so you can reach for the correct tool quickly
  • OPTIMUM STRENGTH- These EKLIND tools are made with EKLIND Alloy Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with a rust resistant finish
  • EKLIND hex keys (allen wrenches) are used to drive internal hexagon socket (allen head) fasteners
  • COMPLETE SAE / METRIC COMBINATION SET contains all common, popular INCH and MM Sizes. INCH Sizes:.050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, & 3/8 and MM sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10
  • MADE IN AMERICA- High quality, Industrial Grade Professional Tools made in the U.S.A.
  • This high quality long reach hex key set is ideal for mechanics, engineers, DIY and garages, professional tool for commercial or occasional use
  • Corner end smoothly inserted into fastener head, reduce wear, equipped with a special receiving box, easy to store
  • P-handles are made from a durable nylon material and are ergonomically-designed for comfortable use.
  • Metric 8-Piece T-Handle Long Arm Ball End Hex Key Wrench, 8-PieceT-Handle Long Arm Star Key Wrench With a special hexagonal ball head
  • The hex wrenches are made from high quality Chrome vanadium steel material for long life.
  • Backed by a limited lifetime warranty
  • Durable caddy keeps keys organized and has marked slots for each key
  • Black oxide finish resists rust
  • Chamfered hex key edges to give better fit and reduce stripped fasteners
  • Wrenches meet or exceed ANSI/ASME B18.3 specifications
  • Chamfered tips for a perfect fit
  • Wrenches made from industrial tool steel, through hardened and tempered for long life
  • Includes 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, and 6mm hex wrenches
  • Two key positions (straight-out or right angle) for extra leverage
  • Holder serves as a handle
  • Hex-key ends are square-cut for a secure full-depth fit and maximum contact with the hex socket to prevent slippage and stripping of the socket
  • Tough, heat-treated alloy steel
  • Handy sets fit your pocket or tool box easily and help eliminate the lost-key problem
  • 【Highlight 5】Lifetime guarantee on the FANSTINOW Allen Wrench Set! If you have any question, please contact us.
  • 【Highlight 4】For installing towel bars, tightening door handles, or assembling furniture, allen wrenches are ideal for tight spots, easy to use case makes it simple to remove and replace even the tiniest wrenches.
  • 【Highlight 3】 A nice set with the allen wrench, package includes: 1 x "hex key wrench set 9-piece", 1 x "bicycle wrench 10 in 1".
  • 【Highlight 2】Customer said: The hex sex wrench is very solid. Long arm/short arm design offers extended reach on one end and extra leverage on the other - easy to read sizes marked on case for fast size selection.
  • 【Highlight 1】The best hex wrenches is well-made. chrome plated surface, waterproof and rustproof. high hardness, good toughness, long service life.
  • Meets or exceeds all applicable standards- Eklind tools meet or go beyond the standard Regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-frank conflict minerals legislation
  • Identify your tools- tools are Color coded red for inch and blue for metric so you can reach for the correct tool quickly
  • Eklind tools cushion grip t-key- keys that have longer shafts to provide extra reach and leverage, the smooth vinyl handles are comfortable and slip resistance, they stack nicely and are organized in a pouch for compact storage, even in your tool box
  • Eklind Tool loop-style t-keys- keys that have longer shafts to provide extra reach and leverage, stack nicely and are organized in a pouch for compact storage, even in your tool box
  • Eklind Tool T-handle Hex key- you get extra reach and extra leverage with the keys' Longer shafts
  • Optimum strength- these Eklind tools are made with Eklind tools Alloy Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with a rust resistant finish
  • Eklind Tool hex keys (Allen wrenches) are used to drive internal hexagon socket (Allen head) fasteners
  • Contains inch sizes: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 & mm sizes: 2, 2. 5, 3, 4, 5, 6
  • Made in America- high quality, industrial grade professional tools Made in the U. S. A.
  • Each set has a different color rubber holder firmly holds each key in a sized-marked hole so you always have the size you need at-hand. Exquisite and small size, they can help you to complete more detailed work. Also, they have more exquisite packaging.
  • Made by Chrome-Vanadium Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with corrosion protected black finish.
  • 8-Pieces Torx-L Key Tamperproof Allen Wrench(The Orange One) Size: T5, T6, T7, T8, T9, T10, T15, T20.
  • 7-Pieces SAE Hex-L Key Allen wrench(The Red One) Size: 0.028, 0.035, 0.05, 1/16", 5/64", 3/32", 7/64".
  • 7-Pieces Metric Hex-L Key Allen Wrench(The Blue One) Size: 0.7mm, 0.9mm, 1.27mm, 1.5mm, 2mm, 2.5mm, 3mm.

More Info

Allen 56609G 22-Key SAE/Metric Long Arm Hex Key Set

Search only Allen brand name
Allen 56609G 22-Key SAE/Metric Long Arm Hex Key Set

Current price: 18.45 USD

Saving: $3.88 (17%)


Check price and availability


Height: 6.88 Inches

Length: 10.75 Inches

Width: 1 Inches

Weight: 1 Pounds

Warranty: Manufacturer Warranty

  • Lifetime warranty
  • ProGuard Finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time
  • Tools are Made in the USA with Bondhus proprietary Protanium steel and are up to 20 percent stronger than competitor tools
  • Low profile short arm reaches screws with low overhead clearance, that are inaccessible with any other type of hex tools
  • Angle entry up to 25 Degrees on sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8-Inch and 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm
  • MEETS OR EXCEEDS ALL APPLICABLE STANDARDS- EKLIND tools meet or go beyond the standard regulations set forth in ANSI, ASME, RoHS, REACH, CA Prop 65 and Dodd-Frank Conflict Minerals Legislation
  • KEEP YOUR KEYS ORGANIZED- A plastic holder firmly holds each key in a sized-marked hole so you always have the size you need at-hand
  • IDENTIFY YOUR TOOLS- Tools are color coded in red for inch sizes and blue for metric sizes so you can reach for the correct tool quickly
  • OPTIMUM STRENGTH- These EKLIND tools are made with EKLIND Alloy Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with a rust resistant finish
  • EKLIND hex keys (allen wrenches) are used to drive internal hexagon socket (allen head) fasteners
  • COMPLETE SAE / METRIC COMBINATION SET contains all common, popular INCH and MM Sizes. INCH Sizes:.050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, & 3/8 and MM sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10
  • MADE IN AMERICA- High quality, Industrial Grade Professional Tools made in the U.S.A.
  • This high quality long reach hex key set is ideal for mechanics, engineers, DIY and garages, professional tool for commercial or occasional use
  • Corner end smoothly inserted into fastener head, reduce wear, equipped with a special receiving box, easy to store
  • P-handles are made from a durable nylon material and are ergonomically-designed for comfortable use.
  • Metric 8-Piece T-Handle Long Arm Ball End Hex Key Wrench, 8-PieceT-Handle Long Arm Star Key Wrench With a special hexagonal ball head
  • The hex wrenches are made from high quality Chrome vanadium steel material for long life.
  • Backed by a limited lifetime warranty
  • Durable caddy keeps keys organized and has marked slots for each key
  • Black oxide finish resists rust
  • Chamfered hex key edges to give better fit and reduce stripped fasteners
  • Wrenches meet or exceed ANSI/ASME B18.3 specifications
  • Chamfered tips for a perfect fit
  • Wrenches made from industrial tool steel, through hardened and tempered for long life
  • Includes 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, and 6mm hex wrenches
  • Two key positions (straight-out or right angle) for extra leverage
  • Holder serves as a handle
  • Hex-key ends are square-cut for a secure full-depth fit and maximum contact with the hex socket to prevent slippage and stripping of the socket
  • Tough, heat-treated alloy steel
  • Handy sets fit your pocket or tool box easily and help eliminate the lost-key problem
  • 【Highlight 5】Lifetime guarantee on the FANSTINOW Allen Wrench Set! If you have any question, please contact us.
  • 【Highlight 4】For installing towel bars, tightening door handles, or assembling furniture, allen wrenches are ideal for tight spots, easy to use case makes it simple to remove and replace even the tiniest wrenches.
  • 【Highlight 3】 A nice set with the allen wrench, package includes: 1 x "hex key wrench set 9-piece", 1 x "bicycle wrench 10 in 1".
  • 【Highlight 2】Customer said: The hex sex wrench is very solid. Long arm/short arm design offers extended reach on one end and extra leverage on the other - easy to read sizes marked on case for fast size selection.
  • 【Highlight 1】The best hex wrenches is well-made. chrome plated surface, waterproof and rustproof. high hardness, good toughness, long service life.
  • Meets or exceeds all applicable standards- Eklind tools meet or go beyond the standard Regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-frank conflict minerals legislation
  • Identify your tools- tools are Color coded red for inch and blue for metric so you can reach for the correct tool quickly
  • Eklind tools cushion grip t-key- keys that have longer shafts to provide extra reach and leverage, the smooth vinyl handles are comfortable and slip resistance, they stack nicely and are organized in a pouch for compact storage, even in your tool box
  • Eklind Tool loop-style t-keys- keys that have longer shafts to provide extra reach and leverage, stack nicely and are organized in a pouch for compact storage, even in your tool box
  • Eklind Tool T-handle Hex key- you get extra reach and extra leverage with the keys' Longer shafts
  • Optimum strength- these Eklind tools are made with Eklind tools Alloy Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with a rust resistant finish
  • Eklind Tool hex keys (Allen wrenches) are used to drive internal hexagon socket (Allen head) fasteners
  • Contains inch sizes: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 & mm sizes: 2, 2. 5, 3, 4, 5, 6
  • Made in America- high quality, industrial grade professional tools Made in the U. S. A.
  • Each set has a different color rubber holder firmly holds each key in a sized-marked hole so you always have the size you need at-hand. Exquisite and small size, they can help you to complete more detailed work. Also, they have more exquisite packaging.
  • Made by Chrome-Vanadium Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with corrosion protected black finish.
  • 8-Pieces Torx-L Key Tamperproof Allen Wrench(The Orange One) Size: T5, T6, T7, T8, T9, T10, T15, T20.
  • 7-Pieces SAE Hex-L Key Allen wrench(The Red One) Size: 0.028, 0.035, 0.05, 1/16", 5/64", 3/32", 7/64".
  • 7-Pieces Metric Hex-L Key Allen Wrench(The Blue One) Size: 0.7mm, 0.9mm, 1.27mm, 1.5mm, 2mm, 2.5mm, 3mm.
  • Non-interference hinged caddy provides easy access to each key
  • Longer length keys for additional leverage and extended reach
  • All hex keys are precision formed to exact dimensional tolerances for precise fit
  • Heat treated, tempered alloy steel provides high strength and resistance to rotational distortion
  • From Allen, the original manufacturer of the hex key

More Info

1    2    3    4    5    6    7    8    9    10