High quality Hand Screw Clamps. Reviews September, 2021, page 3

Strong Hand Tools, Pipe Alignment Clamp, with Quick Acting Screws, CPA60

Search only Strong Hand Tools brand name
Strong Hand Tools, Pipe Alignment Clamp, with Quick Acting Screws, CPA60

Current price: 159.98 USD


Check price and availability


Height: 5.25 Inches

Length: 10 Inches

Width: 8.25 Inches

Weight: 11.0231131 Pounds

  • Capacity: 2″ ~ 6″ (50 ~ 152 mm)
  • The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange.
  • Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding.
  • The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site.

More Info

Dubuque Clamp Works Made in USA Wood Hand Screw Clamp 6 inch Hard Maple Jaw

Search only Dubuque Clamp Works brand name
Dubuque Clamp Works Made in USA Wood Hand Screw Clamp 6 inch Hard Maple Jaw

Current price: 46.95 USD


Check price and availability


Height: 6 Inches

Length: 11 Inches

Width: 1 Inches

  • Capacity: 2″ ~ 6″ (50 ~ 152 mm)
  • The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange.
  • Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding.
  • The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site.
  • Jaw length: 6 inches. Clamp opening: 3 inch. Jaw depth 3 inches
  • Other sizes available from 4 to 14 inches!
  • The Jaws are made with fine quality American hard maple.
  • The Dubuque Handscrew is one of the most Versatile clamps you can use
  • Last woodworking clamp still made in the USA - superior quality; world competitive price

More Info

E-TING 4Pcs Hand Tool Toggle Clamp 201B Antislip Red Horizontal Clamp 201-B Quick Release Tool

Search only E-TING brand name
E-TING 4Pcs Hand Tool Toggle Clamp 201B Antislip Red Horizontal Clamp 201-B Quick Release Tool

Current price: 11.99 USD

Saving: $4.00 (25%)


Check price and availability


Height: 3.7401574765 Inches

Length: 5.905511805 Inches

Width: 1.4173228332 Inches

Weight: 1.1464037624 Pounds

  • Capacity: 2″ ~ 6″ (50 ~ 152 mm)
  • The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange.
  • Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding.
  • The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site.
  • Jaw length: 6 inches. Clamp opening: 3 inch. Jaw depth 3 inches
  • Other sizes available from 4 to 14 inches!
  • The Jaws are made with fine quality American hard maple.
  • The Dubuque Handscrew is one of the most Versatile clamps you can use
  • Last woodworking clamp still made in the USA - superior quality; world competitive price
  • Application: A rock-solid grip to install on jigs, tool fixtures, or movable bases
  • Design: Low height design. Retracted clamp will allow for vertical removal of clamped item, mechanism allows maximum clearance
  • Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance; Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips
  • Size: approx. 145*35*40mm/ 5.7" x 1.38" x 1.57" (L*W*H). Holding capacity force: 198 lbs.
  • Package Included: 4 pcs E-TING GH-201B horizontal quick release toggle clamp

More Info

20 Pieces Stainless Steel Hose Clamps Worm Gear Clamp for Brewing Plumbing Automotive and Mechanical Applications - Beer Line Clamps 0.39 - 0.63 Inch

Search only Mudder brand name
20 Pieces Stainless Steel Hose Clamps Worm Gear Clamp for Brewing Plumbing Automotive and Mechanical Applications - Beer Line Clamps 0.39 - 0.63 Inch

Current price: 8.59 USD


Check price and availability


Height: 0.6299212592 Inches

Length: 7.086614166 Inches

Width: 4.724409444 Inches

  • Capacity: 2″ ~ 6″ (50 ~ 152 mm)
  • The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange.
  • Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding.
  • The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site.
  • Jaw length: 6 inches. Clamp opening: 3 inch. Jaw depth 3 inches
  • Other sizes available from 4 to 14 inches!
  • The Jaws are made with fine quality American hard maple.
  • The Dubuque Handscrew is one of the most Versatile clamps you can use
  • Last woodworking clamp still made in the USA - superior quality; world competitive price
  • Application: A rock-solid grip to install on jigs, tool fixtures, or movable bases
  • Design: Low height design. Retracted clamp will allow for vertical removal of clamped item, mechanism allows maximum clearance
  • Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance; Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips
  • Size: approx. 145*35*40mm/ 5.7" x 1.38" x 1.57" (L*W*H). Holding capacity force: 198 lbs.
  • Package Included: 4 pcs E-TING GH-201B horizontal quick release toggle clamp
  • What you get: each package consists of 20 pieces stainless steel hose clamps, sufficient number to meet your different needs and enough to use for a long period of time
  • Size: the size of each clamp is about 10 - 16 mm (0.39 - 0.63 inch), such a small size allows you to apply it simplly by yourself at home without asking others for help
  • Easy to use: adjustable handle make it easy to use and handle, allow users to easily release or tighten without a screwdriver to adjust the band diameter range by using the handle without using any other tools
  • Application: these worm clamp are applied to lock the hose tightly with a view to prevent flow leakage, this hose clamp assortment kit can be applied for securing hose, cable, pipe, tube, fuel lines, beer line and so on
  • Quality material: worm gear clamp is made of stainless steel, constructed to resist scaling and corrosion, solid and durable, ensure long term use

More Info

Kreg KHC-Premium Face Clamp

Search only Kreg Tool brand name
Kreg KHC-Premium Face Clamp

Current price: 20 USD

Saving: $2.99 (13%)


Check price and availability


Height: 8.2499835 Inches

Length: 8.999982 Inches

Width: 32.499935 Inches

Weight: 3 Pounds

  • Capacity: 2″ ~ 6″ (50 ~ 152 mm)
  • The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange.
  • Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding.
  • The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site.
  • Jaw length: 6 inches. Clamp opening: 3 inch. Jaw depth 3 inches
  • Other sizes available from 4 to 14 inches!
  • The Jaws are made with fine quality American hard maple.
  • The Dubuque Handscrew is one of the most Versatile clamps you can use
  • Last woodworking clamp still made in the USA - superior quality; world competitive price
  • Application: A rock-solid grip to install on jigs, tool fixtures, or movable bases
  • Design: Low height design. Retracted clamp will allow for vertical removal of clamped item, mechanism allows maximum clearance
  • Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance; Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips
  • Size: approx. 145*35*40mm/ 5.7" x 1.38" x 1.57" (L*W*H). Holding capacity force: 198 lbs.
  • Package Included: 4 pcs E-TING GH-201B horizontal quick release toggle clamp
  • What you get: each package consists of 20 pieces stainless steel hose clamps, sufficient number to meet your different needs and enough to use for a long period of time
  • Size: the size of each clamp is about 10 - 16 mm (0.39 - 0.63 inch), such a small size allows you to apply it simplly by yourself at home without asking others for help
  • Easy to use: adjustable handle make it easy to use and handle, allow users to easily release or tighten without a screwdriver to adjust the band diameter range by using the handle without using any other tools
  • Application: these worm clamp are applied to lock the hose tightly with a view to prevent flow leakage, this hose clamp assortment kit can be applied for securing hose, cable, pipe, tube, fuel lines, beer line and so on
  • Quality material: worm gear clamp is made of stainless steel, constructed to resist scaling and corrosion, solid and durable, ensure long term use
  • 3" Reach (76mm); clamps materials up to 23/4" Thick (70mm
  • The large face of the clamp keeps the joint perfectly flush
  • Used primarily for securing individual joints while pocket-screws are being driven
  • Unique Clamp designed specifically for pocket-screw joinery

More Info

JORGENSEN 4-pack Steel Bar Clamps Set, 6-inch & 12-inch Medium Duty, 600 Lbs Load Limit, for Woodworking

Search only Jorgensen brand name
JORGENSEN 4-pack Steel Bar Clamps Set, 6-inch & 12-inch Medium Duty, 600 Lbs Load Limit, for Woodworking

Current price: 40.99 USD


Check price and availability


  • Capacity: 2″ ~ 6″ (50 ~ 152 mm)
  • The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange.
  • Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding.
  • The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site.
  • Jaw length: 6 inches. Clamp opening: 3 inch. Jaw depth 3 inches
  • Other sizes available from 4 to 14 inches!
  • The Jaws are made with fine quality American hard maple.
  • The Dubuque Handscrew is one of the most Versatile clamps you can use
  • Last woodworking clamp still made in the USA - superior quality; world competitive price
  • Application: A rock-solid grip to install on jigs, tool fixtures, or movable bases
  • Design: Low height design. Retracted clamp will allow for vertical removal of clamped item, mechanism allows maximum clearance
  • Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance; Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips
  • Size: approx. 145*35*40mm/ 5.7" x 1.38" x 1.57" (L*W*H). Holding capacity force: 198 lbs.
  • Package Included: 4 pcs E-TING GH-201B horizontal quick release toggle clamp
  • What you get: each package consists of 20 pieces stainless steel hose clamps, sufficient number to meet your different needs and enough to use for a long period of time
  • Size: the size of each clamp is about 10 - 16 mm (0.39 - 0.63 inch), such a small size allows you to apply it simplly by yourself at home without asking others for help
  • Easy to use: adjustable handle make it easy to use and handle, allow users to easily release or tighten without a screwdriver to adjust the band diameter range by using the handle without using any other tools
  • Application: these worm clamp are applied to lock the hose tightly with a view to prevent flow leakage, this hose clamp assortment kit can be applied for securing hose, cable, pipe, tube, fuel lines, beer line and so on
  • Quality material: worm gear clamp is made of stainless steel, constructed to resist scaling and corrosion, solid and durable, ensure long term use
  • 3" Reach (76mm); clamps materials up to 23/4" Thick (70mm
  • The large face of the clamp keeps the joint perfectly flush
  • Used primarily for securing individual joints while pocket-screws are being driven
  • Unique Clamp designed specifically for pocket-screw joinery
  • Designed for all types of medium-duty clamping, and Ideal for hobbyist, carpenters, woodworkers, metalworkers and professional trades people of all types.
  • With soft and durable plastic pads, steel bar is plated to be rust resistant and the iron castings have an orange baked enamel finish.
  • Multiple-Disc-Clutch design consist hardened plated steel clutch disc and one spring which allows the sliding head to hold securely at any point along the bar.
  • Sliding head design makes this style fast acting: the sliding head is threaded to accommodate the screw with large easy grip handle and swivel pad.
  • Throat depth: 2-1/2 inch, Load limit: 600lbs, Maximum opening capacity: 6 inch & 12inch.

More Info

Bessey BES8511 Face Frame Clamp Pair

Search only Bessey brand name
Bessey BES8511 Face Frame Clamp Pair

Current price: 76.66 USD


Check price and availability


Height: 3 Inches

Length: 10 Inches

Width: 6 Inches

Weight: 2 Pounds

  • Capacity: 2″ ~ 6″ (50 ~ 152 mm)
  • The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange.
  • Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding.
  • The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site.
  • Jaw length: 6 inches. Clamp opening: 3 inch. Jaw depth 3 inches
  • Other sizes available from 4 to 14 inches!
  • The Jaws are made with fine quality American hard maple.
  • The Dubuque Handscrew is one of the most Versatile clamps you can use
  • Last woodworking clamp still made in the USA - superior quality; world competitive price
  • Application: A rock-solid grip to install on jigs, tool fixtures, or movable bases
  • Design: Low height design. Retracted clamp will allow for vertical removal of clamped item, mechanism allows maximum clearance
  • Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance; Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips
  • Size: approx. 145*35*40mm/ 5.7" x 1.38" x 1.57" (L*W*H). Holding capacity force: 198 lbs.
  • Package Included: 4 pcs E-TING GH-201B horizontal quick release toggle clamp
  • What you get: each package consists of 20 pieces stainless steel hose clamps, sufficient number to meet your different needs and enough to use for a long period of time
  • Size: the size of each clamp is about 10 - 16 mm (0.39 - 0.63 inch), such a small size allows you to apply it simplly by yourself at home without asking others for help
  • Easy to use: adjustable handle make it easy to use and handle, allow users to easily release or tighten without a screwdriver to adjust the band diameter range by using the handle without using any other tools
  • Application: these worm clamp are applied to lock the hose tightly with a view to prevent flow leakage, this hose clamp assortment kit can be applied for securing hose, cable, pipe, tube, fuel lines, beer line and so on
  • Quality material: worm gear clamp is made of stainless steel, constructed to resist scaling and corrosion, solid and durable, ensure long term use
  • 3" Reach (76mm); clamps materials up to 23/4" Thick (70mm
  • The large face of the clamp keeps the joint perfectly flush
  • Used primarily for securing individual joints while pocket-screws are being driven
  • Unique Clamp designed specifically for pocket-screw joinery
  • Designed for all types of medium-duty clamping, and Ideal for hobbyist, carpenters, woodworkers, metalworkers and professional trades people of all types.
  • With soft and durable plastic pads, steel bar is plated to be rust resistant and the iron castings have an orange baked enamel finish.
  • Multiple-Disc-Clutch design consist hardened plated steel clutch disc and one spring which allows the sliding head to hold securely at any point along the bar.
  • Sliding head design makes this style fast acting: the sliding head is threaded to accommodate the screw with large easy grip handle and swivel pad.
  • Throat depth: 2-1/2 inch, Load limit: 600lbs, Maximum opening capacity: 6 inch & 12inch.
  • Comes with non-marring felt pads for clamp faces and alignment plate to protect and cushion the points of contact on your cabinet.
  • Clamp specifications: works on stiles up to 1-1/4 in. thick; 4" clamp capacity; 2" jaw; clamping force of 300 - 600 lbs.
  • Equipped with pilot-hole drill guide that can be flipped out of the way to drive in the screw once the pilot hole is drilled.
  • Tighten, align, pre-drill and fasten your cabinet stile, all without having to re-position or remove your clamp!
  • Includes two (2) BES8511 Face Frame Cabinetry Clamps

More Info

Stainless Steel Wall Mount Ceiling Mount Pipe Supports, 2pcs Adjustable Pipe Bracket Clamp Pipe Straps with Screws for Dia 32mm (1-inch) Pipe Tube (32mm (1-inch))

Search only Opaltool brand name
Stainless Steel Wall Mount Ceiling Mount Pipe Supports, 2pcs Adjustable Pipe Bracket Clamp Pipe Straps with Screws for Dia 32mm (1-inch) Pipe Tube (32mm (1-inch))

Current price: 18.89 USD


Check price and availability


Weight: 0.6834330122 Pounds

  • Capacity: 2″ ~ 6″ (50 ~ 152 mm)
  • The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange.
  • Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding.
  • The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site.
  • Jaw length: 6 inches. Clamp opening: 3 inch. Jaw depth 3 inches
  • Other sizes available from 4 to 14 inches!
  • The Jaws are made with fine quality American hard maple.
  • The Dubuque Handscrew is one of the most Versatile clamps you can use
  • Last woodworking clamp still made in the USA - superior quality; world competitive price
  • Application: A rock-solid grip to install on jigs, tool fixtures, or movable bases
  • Design: Low height design. Retracted clamp will allow for vertical removal of clamped item, mechanism allows maximum clearance
  • Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance; Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips
  • Size: approx. 145*35*40mm/ 5.7" x 1.38" x 1.57" (L*W*H). Holding capacity force: 198 lbs.
  • Package Included: 4 pcs E-TING GH-201B horizontal quick release toggle clamp
  • What you get: each package consists of 20 pieces stainless steel hose clamps, sufficient number to meet your different needs and enough to use for a long period of time
  • Size: the size of each clamp is about 10 - 16 mm (0.39 - 0.63 inch), such a small size allows you to apply it simplly by yourself at home without asking others for help
  • Easy to use: adjustable handle make it easy to use and handle, allow users to easily release or tighten without a screwdriver to adjust the band diameter range by using the handle without using any other tools
  • Application: these worm clamp are applied to lock the hose tightly with a view to prevent flow leakage, this hose clamp assortment kit can be applied for securing hose, cable, pipe, tube, fuel lines, beer line and so on
  • Quality material: worm gear clamp is made of stainless steel, constructed to resist scaling and corrosion, solid and durable, ensure long term use
  • 3" Reach (76mm); clamps materials up to 23/4" Thick (70mm
  • The large face of the clamp keeps the joint perfectly flush
  • Used primarily for securing individual joints while pocket-screws are being driven
  • Unique Clamp designed specifically for pocket-screw joinery
  • Designed for all types of medium-duty clamping, and Ideal for hobbyist, carpenters, woodworkers, metalworkers and professional trades people of all types.
  • With soft and durable plastic pads, steel bar is plated to be rust resistant and the iron castings have an orange baked enamel finish.
  • Multiple-Disc-Clutch design consist hardened plated steel clutch disc and one spring which allows the sliding head to hold securely at any point along the bar.
  • Sliding head design makes this style fast acting: the sliding head is threaded to accommodate the screw with large easy grip handle and swivel pad.
  • Throat depth: 2-1/2 inch, Load limit: 600lbs, Maximum opening capacity: 6 inch & 12inch.
  • Comes with non-marring felt pads for clamp faces and alignment plate to protect and cushion the points of contact on your cabinet.
  • Clamp specifications: works on stiles up to 1-1/4 in. thick; 4" clamp capacity; 2" jaw; clamping force of 300 - 600 lbs.
  • Equipped with pilot-hole drill guide that can be flipped out of the way to drive in the screw once the pilot hole is drilled.
  • Tighten, align, pre-drill and fasten your cabinet stile, all without having to re-position or remove your clamp!
  • Includes two (2) BES8511 Face Frame Cabinetry Clamps
  • 🔧Easy to Install--Easy installation and can be mounted on wall or on ceiling.
  • 🔧Adjustable Bracket--The height of the bracket adjustable. Adjustable range from 50mm to 100mm.
  • 🔧Premium Material--It made of 304 stainless steel, durable and resistant to rust.
  • 🔧Function--It designed special for pipe, tube or rod fixation.
  • 🔧Fit for--It fit for Dia 32mm-34mm (1-inch) pipe.

More Info

POWERTEC 70120 4-Inch Key Hose Clamp | Stainless Steel 4” Thumb Screw Dust Collector Hose Clamps – 5 Pack

Search only POWERTEC brand name
POWERTEC 70120 4-Inch Key Hose Clamp | Stainless Steel 4” Thumb Screw Dust Collector Hose Clamps – 5 Pack

Current price: 8.39 USD

Saving: $1.60 (16%)


Check price and availability


Height: 2 Inches

Length: 6 Inches

Width: 6 Inches

  • Capacity: 2″ ~ 6″ (50 ~ 152 mm)
  • The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange.
  • Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding.
  • The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site.
  • Jaw length: 6 inches. Clamp opening: 3 inch. Jaw depth 3 inches
  • Other sizes available from 4 to 14 inches!
  • The Jaws are made with fine quality American hard maple.
  • The Dubuque Handscrew is one of the most Versatile clamps you can use
  • Last woodworking clamp still made in the USA - superior quality; world competitive price
  • Application: A rock-solid grip to install on jigs, tool fixtures, or movable bases
  • Design: Low height design. Retracted clamp will allow for vertical removal of clamped item, mechanism allows maximum clearance
  • Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance; Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips
  • Size: approx. 145*35*40mm/ 5.7" x 1.38" x 1.57" (L*W*H). Holding capacity force: 198 lbs.
  • Package Included: 4 pcs E-TING GH-201B horizontal quick release toggle clamp
  • What you get: each package consists of 20 pieces stainless steel hose clamps, sufficient number to meet your different needs and enough to use for a long period of time
  • Size: the size of each clamp is about 10 - 16 mm (0.39 - 0.63 inch), such a small size allows you to apply it simplly by yourself at home without asking others for help
  • Easy to use: adjustable handle make it easy to use and handle, allow users to easily release or tighten without a screwdriver to adjust the band diameter range by using the handle without using any other tools
  • Application: these worm clamp are applied to lock the hose tightly with a view to prevent flow leakage, this hose clamp assortment kit can be applied for securing hose, cable, pipe, tube, fuel lines, beer line and so on
  • Quality material: worm gear clamp is made of stainless steel, constructed to resist scaling and corrosion, solid and durable, ensure long term use
  • 3" Reach (76mm); clamps materials up to 23/4" Thick (70mm
  • The large face of the clamp keeps the joint perfectly flush
  • Used primarily for securing individual joints while pocket-screws are being driven
  • Unique Clamp designed specifically for pocket-screw joinery
  • Designed for all types of medium-duty clamping, and Ideal for hobbyist, carpenters, woodworkers, metalworkers and professional trades people of all types.
  • With soft and durable plastic pads, steel bar is plated to be rust resistant and the iron castings have an orange baked enamel finish.
  • Multiple-Disc-Clutch design consist hardened plated steel clutch disc and one spring which allows the sliding head to hold securely at any point along the bar.
  • Sliding head design makes this style fast acting: the sliding head is threaded to accommodate the screw with large easy grip handle and swivel pad.
  • Throat depth: 2-1/2 inch, Load limit: 600lbs, Maximum opening capacity: 6 inch & 12inch.
  • Comes with non-marring felt pads for clamp faces and alignment plate to protect and cushion the points of contact on your cabinet.
  • Clamp specifications: works on stiles up to 1-1/4 in. thick; 4" clamp capacity; 2" jaw; clamping force of 300 - 600 lbs.
  • Equipped with pilot-hole drill guide that can be flipped out of the way to drive in the screw once the pilot hole is drilled.
  • Tighten, align, pre-drill and fasten your cabinet stile, all without having to re-position or remove your clamp!
  • Includes two (2) BES8511 Face Frame Cabinetry Clamps
  • 🔧Easy to Install--Easy installation and can be mounted on wall or on ceiling.
  • 🔧Adjustable Bracket--The height of the bracket adjustable. Adjustable range from 50mm to 100mm.
  • 🔧Premium Material--It made of 304 stainless steel, durable and resistant to rust.
  • 🔧Function--It designed special for pipe, tube or rod fixation.
  • 🔧Fit for--It fit for Dia 32mm-34mm (1-inch) pipe.
  • VERSATILITY: Can be used indoor and outdoor for a wide assortment of home, automotive, and DIY woodworking applications – such as securing a dryer vent hose, duct work, piping, tubes, large cables and more
  • QUALITY: Delivers a heavy duty, leak proof and corrosion resistant hose clamping tool constructed out of premium grade stainless steel
  • EASY TURN: Hose clamp allows you to simply use the thumb screw clamp to quickly loosen or tighten it without the use of tools
  • APPLICATION: Allows you to secure your ductwork hoses and connect dust collection hoses to dust hoods, connectors, 4 inch blast gates, and other dust collection fittings
  • INCLUDES: 4” Key Type Hose Clamps – Pack of 5

More Info

2-1/2 Inch Hose Clamp, Key-Type Adjustable Stainless Steel Hose Clamps, Pipe Clamp, Worm Gear Clamps, Dryer Vent Clamp, Thumb Screw Metal Clamps

Search only Bueyfolt brand name
2-1/2 Inch Hose Clamp, Key-Type Adjustable Stainless Steel Hose Clamps, Pipe Clamp, Worm Gear Clamps, Dryer Vent Clamp, Thumb Screw Metal Clamps

Current price: 5.69 USD


Check price and availability


  • Capacity: 2″ ~ 6″ (50 ~ 152 mm)
  • The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange.
  • Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding.
  • The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site.
  • Jaw length: 6 inches. Clamp opening: 3 inch. Jaw depth 3 inches
  • Other sizes available from 4 to 14 inches!
  • The Jaws are made with fine quality American hard maple.
  • The Dubuque Handscrew is one of the most Versatile clamps you can use
  • Last woodworking clamp still made in the USA - superior quality; world competitive price
  • Application: A rock-solid grip to install on jigs, tool fixtures, or movable bases
  • Design: Low height design. Retracted clamp will allow for vertical removal of clamped item, mechanism allows maximum clearance
  • Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance; Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips
  • Size: approx. 145*35*40mm/ 5.7" x 1.38" x 1.57" (L*W*H). Holding capacity force: 198 lbs.
  • Package Included: 4 pcs E-TING GH-201B horizontal quick release toggle clamp
  • What you get: each package consists of 20 pieces stainless steel hose clamps, sufficient number to meet your different needs and enough to use for a long period of time
  • Size: the size of each clamp is about 10 - 16 mm (0.39 - 0.63 inch), such a small size allows you to apply it simplly by yourself at home without asking others for help
  • Easy to use: adjustable handle make it easy to use and handle, allow users to easily release or tighten without a screwdriver to adjust the band diameter range by using the handle without using any other tools
  • Application: these worm clamp are applied to lock the hose tightly with a view to prevent flow leakage, this hose clamp assortment kit can be applied for securing hose, cable, pipe, tube, fuel lines, beer line and so on
  • Quality material: worm gear clamp is made of stainless steel, constructed to resist scaling and corrosion, solid and durable, ensure long term use
  • 3" Reach (76mm); clamps materials up to 23/4" Thick (70mm
  • The large face of the clamp keeps the joint perfectly flush
  • Used primarily for securing individual joints while pocket-screws are being driven
  • Unique Clamp designed specifically for pocket-screw joinery
  • Designed for all types of medium-duty clamping, and Ideal for hobbyist, carpenters, woodworkers, metalworkers and professional trades people of all types.
  • With soft and durable plastic pads, steel bar is plated to be rust resistant and the iron castings have an orange baked enamel finish.
  • Multiple-Disc-Clutch design consist hardened plated steel clutch disc and one spring which allows the sliding head to hold securely at any point along the bar.
  • Sliding head design makes this style fast acting: the sliding head is threaded to accommodate the screw with large easy grip handle and swivel pad.
  • Throat depth: 2-1/2 inch, Load limit: 600lbs, Maximum opening capacity: 6 inch & 12inch.
  • Comes with non-marring felt pads for clamp faces and alignment plate to protect and cushion the points of contact on your cabinet.
  • Clamp specifications: works on stiles up to 1-1/4 in. thick; 4" clamp capacity; 2" jaw; clamping force of 300 - 600 lbs.
  • Equipped with pilot-hole drill guide that can be flipped out of the way to drive in the screw once the pilot hole is drilled.
  • Tighten, align, pre-drill and fasten your cabinet stile, all without having to re-position or remove your clamp!
  • Includes two (2) BES8511 Face Frame Cabinetry Clamps
  • 🔧Easy to Install--Easy installation and can be mounted on wall or on ceiling.
  • 🔧Adjustable Bracket--The height of the bracket adjustable. Adjustable range from 50mm to 100mm.
  • 🔧Premium Material--It made of 304 stainless steel, durable and resistant to rust.
  • 🔧Function--It designed special for pipe, tube or rod fixation.
  • 🔧Fit for--It fit for Dia 32mm-34mm (1-inch) pipe.
  • VERSATILITY: Can be used indoor and outdoor for a wide assortment of home, automotive, and DIY woodworking applications – such as securing a dryer vent hose, duct work, piping, tubes, large cables and more
  • QUALITY: Delivers a heavy duty, leak proof and corrosion resistant hose clamping tool constructed out of premium grade stainless steel
  • EASY TURN: Hose clamp allows you to simply use the thumb screw clamp to quickly loosen or tighten it without the use of tools
  • APPLICATION: Allows you to secure your ductwork hoses and connect dust collection hoses to dust hoods, connectors, 4 inch blast gates, and other dust collection fittings
  • INCLUDES: 4” Key Type Hose Clamps – Pack of 5
  • Environmental Friendly-It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long.
  • Used in securing hose tightly with a view to preventing flow leakage. Ideal for household, automotive, boat, industrial usage.
  • Easy installation- Place in suitable place, turn screw clockwise to tighten hoses, counter clockwise for loose.
  • 4 Pack 2-1/2inch Hose Clamps, Adjustable size, fits hoses from 1-7/8” diameter up to 3”.
  • Durable Material- Made of high quality 304 stainless steel, rust-proof, water-proof, corrosion-resistant, strong, durable and long lasting use.

More Info

1    2    3    4    5    6    7    8    9    10