Great Gas Welding Valves. Reviews September, 2021, page 4

4YANG Argon CO2 Regulators Gauges Gas Welding Regulator CGA580 compatible with Miller Lincoln Mig Tig Weld (With Hose)

Search only 4YANG brand name
4YANG Argon CO2 Regulators Gauges Gas Welding Regulator CGA580 compatible with Miller Lincoln Mig Tig Weld (With Hose)

Current price: 40.99 USD


Check price and availability


  • ❥ CGA580 fitting, FEMALE 5/8" and MALE 9/16" Outlet, 80 Inch Hose.
  • ❥ Brass regulator body.
  • ❥ Accurate measurement of gas.
  • ❥ 2" dual-gauges for easy reading.
  • ❥ Designed for MIG & TIG applications and provide accurate regulation of gas flow.

More Info

MIG155GSV 155 AMP INVERTER MIG/STICK ARC WELDER WITH DUAL VOLTAGE 220V/110V welding machine 3 Year Warranty

Search only W Weldpro brand name
MIG155GSV 155 AMP INVERTER MIG/STICK ARC WELDER WITH DUAL VOLTAGE 220V/110V welding machine 3 Year Warranty

Current price: 386 USD


Check price and availability


Height: 6.69 Inches

Length: 14.96 Inches

Width: 13.58 Inches

Weight: 21.17 Pounds

  • ❥ CGA580 fitting, FEMALE 5/8" and MALE 9/16" Outlet, 80 Inch Hose.
  • ❥ Brass regulator body.
  • ❥ Accurate measurement of gas.
  • ❥ 2" dual-gauges for easy reading.
  • ❥ Designed for MIG & TIG applications and provide accurate regulation of gas flow.
  • The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.
  • This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
  • Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 396 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
  • Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
  • Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding. AND 3 YEAR WARRANTY!

More Info

WeldingCity 150-amp WP-17FV (Flexible Head w/Gas Valve) Air-cooled TIG Welding Torch Complete Package with 12.5-ft Power Cable Hose and Dinse 35-50 (Solid 1/2"-pin) Cable Adapter (with Separate Gas)

Search only WeldingCity brand name
WeldingCity 150-amp WP-17FV (Flexible Head w/Gas Valve) Air-cooled TIG Welding Torch Complete Package with 12.5-ft Power Cable Hose and Dinse 35-50 (Solid 1/2

Current price: 62.99 USD


Check price and availability


Height: 2 Inches

Length: 15 Inches

Width: 15 Inches

Weight: 4.44 Pounds

  • ❥ CGA580 fitting, FEMALE 5/8" and MALE 9/16" Outlet, 80 Inch Hose.
  • ❥ Brass regulator body.
  • ❥ Accurate measurement of gas.
  • ❥ 2" dual-gauges for easy reading.
  • ❥ Designed for MIG & TIG applications and provide accurate regulation of gas flow.
  • The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.
  • This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
  • Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 396 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
  • Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
  • Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding. AND 3 YEAR WARRANTY!
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Dinse 35-50mm solid 1/2"-pin cable adapter with separate gas hose and 3/8-24R female rear to adapt WP-17 torch cable. Compatible with Miller 195378 adapter for use with some welders of Syncrowave, Dynasty, Maxstar, Econotig, CST, XMT, etc, as well as Lincoln K960-1 for PTA torch series in some welders of Invertec, SquareWave, PowerWave, Aspect, Precision, etc. Also ideal replacement for many other welders like ESAB, Weldcraft, CK, etc. CHECK YOUR TIG WELDER FOR MATCHING.
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-17 (regular), WP-17F (flexible head), WP-17V (head with gas valve) and WP-17FV (flexible head with gas valve).
  • 12-pcs torch package includes: 150-amp air-cooled WP-17 series torch body with handle, 1-piece type EPDM rubber power cable hose 57Y01R (12.5-ft) or 57Y03R (25-ft), Nylon cable cover with zipper; Dinse 35-50mm solid 1/2"-pin adapter with separate gas hose and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps).
  • Premium quality 150-amp air-cooled WP-17 complete TIG welding torch package with 12.5-ft and 25-ft 1-piece rubber power cable for use with most mainstream TIG welders. Shipped as un-assembled.

More Info

5lb co2 Tank- New Aluminum Cylinder with CGA320 Valve

Search only Luxfer brand name
5lb co2 Tank- New Aluminum Cylinder with CGA320 Valve

Current price: 71.99 USD


Check price and availability


Height: 14.2 Inches

Length: 5.3 Inches

Width: 5.3 Inches

  • ❥ CGA580 fitting, FEMALE 5/8" and MALE 9/16" Outlet, 80 Inch Hose.
  • ❥ Brass regulator body.
  • ❥ Accurate measurement of gas.
  • ❥ 2" dual-gauges for easy reading.
  • ❥ Designed for MIG & TIG applications and provide accurate regulation of gas flow.
  • The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.
  • This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
  • Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 396 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
  • Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
  • Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding. AND 3 YEAR WARRANTY!
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Dinse 35-50mm solid 1/2"-pin cable adapter with separate gas hose and 3/8-24R female rear to adapt WP-17 torch cable. Compatible with Miller 195378 adapter for use with some welders of Syncrowave, Dynasty, Maxstar, Econotig, CST, XMT, etc, as well as Lincoln K960-1 for PTA torch series in some welders of Invertec, SquareWave, PowerWave, Aspect, Precision, etc. Also ideal replacement for many other welders like ESAB, Weldcraft, CK, etc. CHECK YOUR TIG WELDER FOR MATCHING.
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-17 (regular), WP-17F (flexible head), WP-17V (head with gas valve) and WP-17FV (flexible head with gas valve).
  • 12-pcs torch package includes: 150-amp air-cooled WP-17 series torch body with handle, 1-piece type EPDM rubber power cable hose 57Y01R (12.5-ft) or 57Y03R (25-ft), Nylon cable cover with zipper; Dinse 35-50mm solid 1/2"-pin adapter with separate gas hose and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps).
  • Premium quality 150-amp air-cooled WP-17 complete TIG welding torch package with 12.5-ft and 25-ft 1-piece rubber power cable for use with most mainstream TIG welders. Shipped as un-assembled.
  • Made in USA
  • Cylinder with valve, shipped empty, high strength aluminum alloy 6061-T6;
  • 5 LB capacity, 1800 PSI, DOT-3AL & TC-3ALM designed
  • 5.25 inch diameter, 14.2 inch length, 1.125" UNF inlet thread.
  • AT PRESENT WE DO NOT SHIP TO CALIFORNIA

More Info

WeldingCity 200-amp WP-26FV-25R (Flexible Head w/Gas Valve) Air-cooled TIG Welding Torch Complete Package with 25-ft Power Cable Hose and Adapter 45V62

Search only WeldingCity brand name
WeldingCity 200-amp WP-26FV-25R (Flexible Head w/Gas Valve) Air-cooled TIG Welding Torch Complete Package with 25-ft Power Cable Hose and Adapter 45V62

Current price: 98.99 USD


Check price and availability


Height: 2 Inches

Length: 15 Inches

Width: 15 Inches

Weight: 7 Pounds

  • ❥ CGA580 fitting, FEMALE 5/8" and MALE 9/16" Outlet, 80 Inch Hose.
  • ❥ Brass regulator body.
  • ❥ Accurate measurement of gas.
  • ❥ 2" dual-gauges for easy reading.
  • ❥ Designed for MIG & TIG applications and provide accurate regulation of gas flow.
  • The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.
  • This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
  • Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 396 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
  • Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
  • Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding. AND 3 YEAR WARRANTY!
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Dinse 35-50mm solid 1/2"-pin cable adapter with separate gas hose and 3/8-24R female rear to adapt WP-17 torch cable. Compatible with Miller 195378 adapter for use with some welders of Syncrowave, Dynasty, Maxstar, Econotig, CST, XMT, etc, as well as Lincoln K960-1 for PTA torch series in some welders of Invertec, SquareWave, PowerWave, Aspect, Precision, etc. Also ideal replacement for many other welders like ESAB, Weldcraft, CK, etc. CHECK YOUR TIG WELDER FOR MATCHING.
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-17 (regular), WP-17F (flexible head), WP-17V (head with gas valve) and WP-17FV (flexible head with gas valve).
  • 12-pcs torch package includes: 150-amp air-cooled WP-17 series torch body with handle, 1-piece type EPDM rubber power cable hose 57Y01R (12.5-ft) or 57Y03R (25-ft), Nylon cable cover with zipper; Dinse 35-50mm solid 1/2"-pin adapter with separate gas hose and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps).
  • Premium quality 150-amp air-cooled WP-17 complete TIG welding torch package with 12.5-ft and 25-ft 1-piece rubber power cable for use with most mainstream TIG welders. Shipped as un-assembled.
  • Made in USA
  • Cylinder with valve, shipped empty, high strength aluminum alloy 6061-T6;
  • 5 LB capacity, 1800 PSI, DOT-3AL & TC-3ALM designed
  • 5.25 inch diameter, 14.2 inch length, 1.125" UNF inlet thread.
  • AT PRESENT WE DO NOT SHIP TO CALIFORNIA
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • 200-amp air-cooled WP-26 series TIG torches are excellent for TIG welding on medium to heavy gauge materials. With Weldcraft style brass cable adapter 45V62 to connect the torch to gas tank and welding machine with standard 1/2" threaded output stud. Ideal replacement for most mainstream welders like Lincoln, Miller, ESAB, Weldcraft, CK, etc. See all listed pictures for torch parts and rear plug. CHECK YOUR TIG WELDER FOR MATCHING.
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-26 (regular), WP-26F (flexible head), WP-26V (head with gas valve) and WP-26FV (flexible head with gas valve).
  • 12-pcs torch package includes: 200-amp air-cooled WP-26 series torch body with handle, 1-piece type EPDM rubber power cable hose 46V28R (12.5-ft) or 46V30R (25-ft), Nylon cable cover with zipper; Weldcraft style brass cable adapter 45V62 and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps).
  • Premium quality 200-amp air-cooled WP-26 complete TIG welding torch package with 12.5-ft or 25-ft 1-piece rubber power cable for use with most mainstream TIG welders. Shipped as un-assembled.

More Info

Propane Torch Hand Hose , Mapp Gas Torch,Welding Torch,Hose Length 1.5M/60"Maximum Operating Temperature 1900℃/3600℉-with Hook (Quick ignition with valve Style)

Search only Aismrii brand name
Propane Torch Hand Hose , Mapp Gas Torch,Welding Torch,Hose Length 1.5M/60

Current price: 46.59 USD


Check price and availability


Height: 5 Inches

Length: 60 Inches

Width: 5 Inches

Weight: 1.3125 Pounds

  • ❥ CGA580 fitting, FEMALE 5/8" and MALE 9/16" Outlet, 80 Inch Hose.
  • ❥ Brass regulator body.
  • ❥ Accurate measurement of gas.
  • ❥ 2" dual-gauges for easy reading.
  • ❥ Designed for MIG & TIG applications and provide accurate regulation of gas flow.
  • The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.
  • This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
  • Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 396 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
  • Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
  • Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding. AND 3 YEAR WARRANTY!
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Dinse 35-50mm solid 1/2"-pin cable adapter with separate gas hose and 3/8-24R female rear to adapt WP-17 torch cable. Compatible with Miller 195378 adapter for use with some welders of Syncrowave, Dynasty, Maxstar, Econotig, CST, XMT, etc, as well as Lincoln K960-1 for PTA torch series in some welders of Invertec, SquareWave, PowerWave, Aspect, Precision, etc. Also ideal replacement for many other welders like ESAB, Weldcraft, CK, etc. CHECK YOUR TIG WELDER FOR MATCHING.
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-17 (regular), WP-17F (flexible head), WP-17V (head with gas valve) and WP-17FV (flexible head with gas valve).
  • 12-pcs torch package includes: 150-amp air-cooled WP-17 series torch body with handle, 1-piece type EPDM rubber power cable hose 57Y01R (12.5-ft) or 57Y03R (25-ft), Nylon cable cover with zipper; Dinse 35-50mm solid 1/2"-pin adapter with separate gas hose and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps).
  • Premium quality 150-amp air-cooled WP-17 complete TIG welding torch package with 12.5-ft and 25-ft 1-piece rubber power cable for use with most mainstream TIG welders. Shipped as un-assembled.
  • Made in USA
  • Cylinder with valve, shipped empty, high strength aluminum alloy 6061-T6;
  • 5 LB capacity, 1800 PSI, DOT-3AL & TC-3ALM designed
  • 5.25 inch diameter, 14.2 inch length, 1.125" UNF inlet thread.
  • AT PRESENT WE DO NOT SHIP TO CALIFORNIA
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • 200-amp air-cooled WP-26 series TIG torches are excellent for TIG welding on medium to heavy gauge materials. With Weldcraft style brass cable adapter 45V62 to connect the torch to gas tank and welding machine with standard 1/2" threaded output stud. Ideal replacement for most mainstream welders like Lincoln, Miller, ESAB, Weldcraft, CK, etc. See all listed pictures for torch parts and rear plug. CHECK YOUR TIG WELDER FOR MATCHING.
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-26 (regular), WP-26F (flexible head), WP-26V (head with gas valve) and WP-26FV (flexible head with gas valve).
  • 12-pcs torch package includes: 200-amp air-cooled WP-26 series torch body with handle, 1-piece type EPDM rubber power cable hose 46V28R (12.5-ft) or 46V30R (25-ft), Nylon cable cover with zipper; Weldcraft style brass cable adapter 45V62 and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps).
  • Premium quality 200-amp air-cooled WP-26 complete TIG welding torch package with 12.5-ft or 25-ft 1-piece rubber power cable for use with most mainstream TIG welders. Shipped as un-assembled.
  • 【Quality assurance】: products have obtained CE, ISO9001 certification, we will provide you with 1 year warranty service。We test the product when we leave the factory. Please don't dismantle it at will
  • 【Note】: when working, it will produce a lot of heat and consume a lot of air. Please do not use it in a closed environment for a long time. When using, try to keep the cylinder upright. After using, please pay attention to protect the thimble at the joint to avoid dust entering or bending to affect the next use
  • 【Easy to use】: our product provides a 1.5M/60 " hose and a hook accessory. You can hang the cylinder on your body for easy operation
  • 【Fuel】:Propane, MAPP, MAP-PRO, threading fits CGA600 US standard ,14.1 OZ MAPP Gas cylinder can be used for 2 hours;
  • 【Widely used】: for precision soldering/brazing, thawing and freezing pipes, large eddy current flame can be used for large diameter brazing, Maximum flame temperature is 1900℃/3600℉, suitable for Soldering up to 3/4"copper pipes;

More Info

Hobart 500559 Handler 140 MIG Welder 115V

Search only Hobart brand name
Hobart 500559 Handler 140 MIG Welder 115V

Current price: 529.99 USD

Saving: $75.00 (12%)


Check price and availability


Height: 13 Inches

Length: 19 Inches

Width: 11 Inches

Weight: 57 Pounds

Warranty: 5 year limited warranty

  • ❥ CGA580 fitting, FEMALE 5/8" and MALE 9/16" Outlet, 80 Inch Hose.
  • ❥ Brass regulator body.
  • ❥ Accurate measurement of gas.
  • ❥ 2" dual-gauges for easy reading.
  • ❥ Designed for MIG & TIG applications and provide accurate regulation of gas flow.
  • The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.
  • This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
  • Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 396 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
  • Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
  • Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding. AND 3 YEAR WARRANTY!
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Dinse 35-50mm solid 1/2"-pin cable adapter with separate gas hose and 3/8-24R female rear to adapt WP-17 torch cable. Compatible with Miller 195378 adapter for use with some welders of Syncrowave, Dynasty, Maxstar, Econotig, CST, XMT, etc, as well as Lincoln K960-1 for PTA torch series in some welders of Invertec, SquareWave, PowerWave, Aspect, Precision, etc. Also ideal replacement for many other welders like ESAB, Weldcraft, CK, etc. CHECK YOUR TIG WELDER FOR MATCHING.
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-17 (regular), WP-17F (flexible head), WP-17V (head with gas valve) and WP-17FV (flexible head with gas valve).
  • 12-pcs torch package includes: 150-amp air-cooled WP-17 series torch body with handle, 1-piece type EPDM rubber power cable hose 57Y01R (12.5-ft) or 57Y03R (25-ft), Nylon cable cover with zipper; Dinse 35-50mm solid 1/2"-pin adapter with separate gas hose and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps).
  • Premium quality 150-amp air-cooled WP-17 complete TIG welding torch package with 12.5-ft and 25-ft 1-piece rubber power cable for use with most mainstream TIG welders. Shipped as un-assembled.
  • Made in USA
  • Cylinder with valve, shipped empty, high strength aluminum alloy 6061-T6;
  • 5 LB capacity, 1800 PSI, DOT-3AL & TC-3ALM designed
  • 5.25 inch diameter, 14.2 inch length, 1.125" UNF inlet thread.
  • AT PRESENT WE DO NOT SHIP TO CALIFORNIA
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • 200-amp air-cooled WP-26 series TIG torches are excellent for TIG welding on medium to heavy gauge materials. With Weldcraft style brass cable adapter 45V62 to connect the torch to gas tank and welding machine with standard 1/2" threaded output stud. Ideal replacement for most mainstream welders like Lincoln, Miller, ESAB, Weldcraft, CK, etc. See all listed pictures for torch parts and rear plug. CHECK YOUR TIG WELDER FOR MATCHING.
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-26 (regular), WP-26F (flexible head), WP-26V (head with gas valve) and WP-26FV (flexible head with gas valve).
  • 12-pcs torch package includes: 200-amp air-cooled WP-26 series torch body with handle, 1-piece type EPDM rubber power cable hose 46V28R (12.5-ft) or 46V30R (25-ft), Nylon cable cover with zipper; Weldcraft style brass cable adapter 45V62 and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps).
  • Premium quality 200-amp air-cooled WP-26 complete TIG welding torch package with 12.5-ft or 25-ft 1-piece rubber power cable for use with most mainstream TIG welders. Shipped as un-assembled.
  • 【Quality assurance】: products have obtained CE, ISO9001 certification, we will provide you with 1 year warranty service。We test the product when we leave the factory. Please don't dismantle it at will
  • 【Note】: when working, it will produce a lot of heat and consume a lot of air. Please do not use it in a closed environment for a long time. When using, try to keep the cylinder upright. After using, please pay attention to protect the thimble at the joint to avoid dust entering or bending to affect the next use
  • 【Easy to use】: our product provides a 1.5M/60 " hose and a hook accessory. You can hang the cylinder on your body for easy operation
  • 【Fuel】:Propane, MAPP, MAP-PRO, threading fits CGA600 US standard ,14.1 OZ MAPP Gas cylinder can be used for 2 hours;
  • 【Widely used】: for precision soldering/brazing, thawing and freezing pipes, large eddy current flame can be used for large diameter brazing, Maximum flame temperature is 1900℃/3600℉, suitable for Soldering up to 3/4"copper pipes;
  • What's Included: 10ft HR-100 MIG gun, 10ft work cable with clamp, Power Cord, Dual-gauge regulator with gas hose, .030 in. contact tips, Quick Select drive roll, Sample spool of flux-cored wire and Material thickness gauge
  • Welding Amperage Range: 25-140 A; 20% duty cycle @ 90 Amps, 19V
  • Operates off 115V standard household current; Wire Feed Speed Range 40-700 IPM, 50-740 IPM at no load
  • Welding Processes: MIG(GMAW), Flux Cored(FCAW)
  • Welds 24 gauge up to 1/4 in mild steel; Weldable Materials: Steel, Stainless Steel and Aluminum
  • 5-position voltage control selector adds a smooth, stable arc at all welding thicknesses

More Info

Torch Tips,Hose Torch,Self-lgnition Hose Torch,High flame temperature up to 1900℃/3600℉ with valve

Search only Aismrii brand name
Torch Tips,Hose Torch,Self-lgnition Hose Torch,High flame temperature up to 1900℃/3600℉ with valve

Current price: 46.59 USD


Check price and availability


Height: 2 Inches

Length: 10 Inches

Width: 6 Inches

Weight: 1.3125 Pounds

  • ❥ CGA580 fitting, FEMALE 5/8" and MALE 9/16" Outlet, 80 Inch Hose.
  • ❥ Brass regulator body.
  • ❥ Accurate measurement of gas.
  • ❥ 2" dual-gauges for easy reading.
  • ❥ Designed for MIG & TIG applications and provide accurate regulation of gas flow.
  • The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.
  • This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
  • Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 396 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
  • Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
  • Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding. AND 3 YEAR WARRANTY!
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Dinse 35-50mm solid 1/2"-pin cable adapter with separate gas hose and 3/8-24R female rear to adapt WP-17 torch cable. Compatible with Miller 195378 adapter for use with some welders of Syncrowave, Dynasty, Maxstar, Econotig, CST, XMT, etc, as well as Lincoln K960-1 for PTA torch series in some welders of Invertec, SquareWave, PowerWave, Aspect, Precision, etc. Also ideal replacement for many other welders like ESAB, Weldcraft, CK, etc. CHECK YOUR TIG WELDER FOR MATCHING.
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-17 (regular), WP-17F (flexible head), WP-17V (head with gas valve) and WP-17FV (flexible head with gas valve).
  • 12-pcs torch package includes: 150-amp air-cooled WP-17 series torch body with handle, 1-piece type EPDM rubber power cable hose 57Y01R (12.5-ft) or 57Y03R (25-ft), Nylon cable cover with zipper; Dinse 35-50mm solid 1/2"-pin adapter with separate gas hose and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps).
  • Premium quality 150-amp air-cooled WP-17 complete TIG welding torch package with 12.5-ft and 25-ft 1-piece rubber power cable for use with most mainstream TIG welders. Shipped as un-assembled.
  • Made in USA
  • Cylinder with valve, shipped empty, high strength aluminum alloy 6061-T6;
  • 5 LB capacity, 1800 PSI, DOT-3AL & TC-3ALM designed
  • 5.25 inch diameter, 14.2 inch length, 1.125" UNF inlet thread.
  • AT PRESENT WE DO NOT SHIP TO CALIFORNIA
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • 200-amp air-cooled WP-26 series TIG torches are excellent for TIG welding on medium to heavy gauge materials. With Weldcraft style brass cable adapter 45V62 to connect the torch to gas tank and welding machine with standard 1/2" threaded output stud. Ideal replacement for most mainstream welders like Lincoln, Miller, ESAB, Weldcraft, CK, etc. See all listed pictures for torch parts and rear plug. CHECK YOUR TIG WELDER FOR MATCHING.
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-26 (regular), WP-26F (flexible head), WP-26V (head with gas valve) and WP-26FV (flexible head with gas valve).
  • 12-pcs torch package includes: 200-amp air-cooled WP-26 series torch body with handle, 1-piece type EPDM rubber power cable hose 46V28R (12.5-ft) or 46V30R (25-ft), Nylon cable cover with zipper; Weldcraft style brass cable adapter 45V62 and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps).
  • Premium quality 200-amp air-cooled WP-26 complete TIG welding torch package with 12.5-ft or 25-ft 1-piece rubber power cable for use with most mainstream TIG welders. Shipped as un-assembled.
  • 【Quality assurance】: products have obtained CE, ISO9001 certification, we will provide you with 1 year warranty service。We test the product when we leave the factory. Please don't dismantle it at will
  • 【Note】: when working, it will produce a lot of heat and consume a lot of air. Please do not use it in a closed environment for a long time. When using, try to keep the cylinder upright. After using, please pay attention to protect the thimble at the joint to avoid dust entering or bending to affect the next use
  • 【Easy to use】: our product provides a 1.5M/60 " hose and a hook accessory. You can hang the cylinder on your body for easy operation
  • 【Fuel】:Propane, MAPP, MAP-PRO, threading fits CGA600 US standard ,14.1 OZ MAPP Gas cylinder can be used for 2 hours;
  • 【Widely used】: for precision soldering/brazing, thawing and freezing pipes, large eddy current flame can be used for large diameter brazing, Maximum flame temperature is 1900℃/3600℉, suitable for Soldering up to 3/4"copper pipes;
  • What's Included: 10ft HR-100 MIG gun, 10ft work cable with clamp, Power Cord, Dual-gauge regulator with gas hose, .030 in. contact tips, Quick Select drive roll, Sample spool of flux-cored wire and Material thickness gauge
  • Welding Amperage Range: 25-140 A; 20% duty cycle @ 90 Amps, 19V
  • Operates off 115V standard household current; Wire Feed Speed Range 40-700 IPM, 50-740 IPM at no load
  • Welding Processes: MIG(GMAW), Flux Cored(FCAW)
  • Welds 24 gauge up to 1/4 in mild steel; Weldable Materials: Steel, Stainless Steel and Aluminum
  • 5-position voltage control selector adds a smooth, stable arc at all welding thicknesses
  • Reliable guarantee: obtain CE, ISO9001 certification。We test the product when we leave the factory. Please don't dismantle it at will。
  • Gas Type : MAPP , Propane, LPG; Connection Standard : CGA600;(Oxygen cylinders are not required)
  • Safety: copper joint with automatic ignition device
  • Easy to use: the length of the hose is 1.5M/60 inch, which can meet more adaptive scenarios
  • Ultra high temperature: operating temperature can reach 1900℃/3600℉

More Info

New 60 cu ft Steel Inert Gas Cylinder with CGA580 Valve - Helium, Nitrogen, Argon, CO2/Nitrogen Mix

Search only Varies brand name
New 60 cu ft Steel Inert Gas Cylinder with CGA580 Valve - Helium, Nitrogen, Argon, CO2/Nitrogen Mix

Current price: 165.8 USD


Check price and availability


Weight: 29 Pounds

  • ❥ CGA580 fitting, FEMALE 5/8" and MALE 9/16" Outlet, 80 Inch Hose.
  • ❥ Brass regulator body.
  • ❥ Accurate measurement of gas.
  • ❥ 2" dual-gauges for easy reading.
  • ❥ Designed for MIG & TIG applications and provide accurate regulation of gas flow.
  • The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.
  • This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
  • Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 396 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
  • Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
  • Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding. AND 3 YEAR WARRANTY!
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Dinse 35-50mm solid 1/2"-pin cable adapter with separate gas hose and 3/8-24R female rear to adapt WP-17 torch cable. Compatible with Miller 195378 adapter for use with some welders of Syncrowave, Dynasty, Maxstar, Econotig, CST, XMT, etc, as well as Lincoln K960-1 for PTA torch series in some welders of Invertec, SquareWave, PowerWave, Aspect, Precision, etc. Also ideal replacement for many other welders like ESAB, Weldcraft, CK, etc. CHECK YOUR TIG WELDER FOR MATCHING.
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-17 (regular), WP-17F (flexible head), WP-17V (head with gas valve) and WP-17FV (flexible head with gas valve).
  • 12-pcs torch package includes: 150-amp air-cooled WP-17 series torch body with handle, 1-piece type EPDM rubber power cable hose 57Y01R (12.5-ft) or 57Y03R (25-ft), Nylon cable cover with zipper; Dinse 35-50mm solid 1/2"-pin adapter with separate gas hose and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps).
  • Premium quality 150-amp air-cooled WP-17 complete TIG welding torch package with 12.5-ft and 25-ft 1-piece rubber power cable for use with most mainstream TIG welders. Shipped as un-assembled.
  • Made in USA
  • Cylinder with valve, shipped empty, high strength aluminum alloy 6061-T6;
  • 5 LB capacity, 1800 PSI, DOT-3AL & TC-3ALM designed
  • 5.25 inch diameter, 14.2 inch length, 1.125" UNF inlet thread.
  • AT PRESENT WE DO NOT SHIP TO CALIFORNIA
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • 200-amp air-cooled WP-26 series TIG torches are excellent for TIG welding on medium to heavy gauge materials. With Weldcraft style brass cable adapter 45V62 to connect the torch to gas tank and welding machine with standard 1/2" threaded output stud. Ideal replacement for most mainstream welders like Lincoln, Miller, ESAB, Weldcraft, CK, etc. See all listed pictures for torch parts and rear plug. CHECK YOUR TIG WELDER FOR MATCHING.
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-26 (regular), WP-26F (flexible head), WP-26V (head with gas valve) and WP-26FV (flexible head with gas valve).
  • 12-pcs torch package includes: 200-amp air-cooled WP-26 series torch body with handle, 1-piece type EPDM rubber power cable hose 46V28R (12.5-ft) or 46V30R (25-ft), Nylon cable cover with zipper; Weldcraft style brass cable adapter 45V62 and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps).
  • Premium quality 200-amp air-cooled WP-26 complete TIG welding torch package with 12.5-ft or 25-ft 1-piece rubber power cable for use with most mainstream TIG welders. Shipped as un-assembled.
  • 【Quality assurance】: products have obtained CE, ISO9001 certification, we will provide you with 1 year warranty service。We test the product when we leave the factory. Please don't dismantle it at will
  • 【Note】: when working, it will produce a lot of heat and consume a lot of air. Please do not use it in a closed environment for a long time. When using, try to keep the cylinder upright. After using, please pay attention to protect the thimble at the joint to avoid dust entering or bending to affect the next use
  • 【Easy to use】: our product provides a 1.5M/60 " hose and a hook accessory. You can hang the cylinder on your body for easy operation
  • 【Fuel】:Propane, MAPP, MAP-PRO, threading fits CGA600 US standard ,14.1 OZ MAPP Gas cylinder can be used for 2 hours;
  • 【Widely used】: for precision soldering/brazing, thawing and freezing pipes, large eddy current flame can be used for large diameter brazing, Maximum flame temperature is 1900℃/3600℉, suitable for Soldering up to 3/4"copper pipes;
  • What's Included: 10ft HR-100 MIG gun, 10ft work cable with clamp, Power Cord, Dual-gauge regulator with gas hose, .030 in. contact tips, Quick Select drive roll, Sample spool of flux-cored wire and Material thickness gauge
  • Welding Amperage Range: 25-140 A; 20% duty cycle @ 90 Amps, 19V
  • Operates off 115V standard household current; Wire Feed Speed Range 40-700 IPM, 50-740 IPM at no load
  • Welding Processes: MIG(GMAW), Flux Cored(FCAW)
  • Welds 24 gauge up to 1/4 in mild steel; Weldable Materials: Steel, Stainless Steel and Aluminum
  • 5-position voltage control selector adds a smooth, stable arc at all welding thicknesses
  • Reliable guarantee: obtain CE, ISO9001 certification。We test the product when we leave the factory. Please don't dismantle it at will。
  • Gas Type : MAPP , Propane, LPG; Connection Standard : CGA600;(Oxygen cylinders are not required)
  • Safety: copper joint with automatic ignition device
  • Easy to use: the length of the hose is 1.5M/60 inch, which can meet more adaptive scenarios
  • Ultra high temperature: operating temperature can reach 1900℃/3600℉
  • All cylinder ship empty. Please consult your local compressed gas supplier for filling needs.
  • 7″ diameter, 22.5″ high
  • Thick walled steel tank, with the durability to stand up to any work site
  • New, high-quality 60 cu ft steel inert gas cylinder with CGA580 valve - Helium, Nitrogen, Argon, CO2/Nitrogen Mix

More Info

YESWELDER Digital MIG-205DS MIG Welder,200Amp 110/220V Dual Voltage, Gas Gasless MIG Welding Machine MIG/Lift TIG/ARC 3 in 1 Multiprocess Welder

Search only YESWELDER brand name
YESWELDER Digital MIG-205DS MIG Welder,200Amp 110/220V Dual Voltage, Gas Gasless MIG Welding Machine MIG/Lift TIG/ARC 3 in 1 Multiprocess Welder

Current price: 449.99 USD

Saving: $50.00 (10%)


Check price and availability


  • ❥ CGA580 fitting, FEMALE 5/8" and MALE 9/16" Outlet, 80 Inch Hose.
  • ❥ Brass regulator body.
  • ❥ Accurate measurement of gas.
  • ❥ 2" dual-gauges for easy reading.
  • ❥ Designed for MIG & TIG applications and provide accurate regulation of gas flow.
  • The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.
  • This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
  • Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 396 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
  • Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
  • Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding. AND 3 YEAR WARRANTY!
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • Dinse 35-50mm solid 1/2"-pin cable adapter with separate gas hose and 3/8-24R female rear to adapt WP-17 torch cable. Compatible with Miller 195378 adapter for use with some welders of Syncrowave, Dynasty, Maxstar, Econotig, CST, XMT, etc, as well as Lincoln K960-1 for PTA torch series in some welders of Invertec, SquareWave, PowerWave, Aspect, Precision, etc. Also ideal replacement for many other welders like ESAB, Weldcraft, CK, etc. CHECK YOUR TIG WELDER FOR MATCHING.
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-17 (regular), WP-17F (flexible head), WP-17V (head with gas valve) and WP-17FV (flexible head with gas valve).
  • 12-pcs torch package includes: 150-amp air-cooled WP-17 series torch body with handle, 1-piece type EPDM rubber power cable hose 57Y01R (12.5-ft) or 57Y03R (25-ft), Nylon cable cover with zipper; Dinse 35-50mm solid 1/2"-pin adapter with separate gas hose and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps).
  • Premium quality 150-amp air-cooled WP-17 complete TIG welding torch package with 12.5-ft and 25-ft 1-piece rubber power cable for use with most mainstream TIG welders. Shipped as un-assembled.
  • Made in USA
  • Cylinder with valve, shipped empty, high strength aluminum alloy 6061-T6;
  • 5 LB capacity, 1800 PSI, DOT-3AL & TC-3ALM designed
  • 5.25 inch diameter, 14.2 inch length, 1.125" UNF inlet thread.
  • AT PRESENT WE DO NOT SHIP TO CALIFORNIA
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
  • 200-amp air-cooled WP-26 series TIG torches are excellent for TIG welding on medium to heavy gauge materials. With Weldcraft style brass cable adapter 45V62 to connect the torch to gas tank and welding machine with standard 1/2" threaded output stud. Ideal replacement for most mainstream welders like Lincoln, Miller, ESAB, Weldcraft, CK, etc. See all listed pictures for torch parts and rear plug. CHECK YOUR TIG WELDER FOR MATCHING.
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-26 (regular), WP-26F (flexible head), WP-26V (head with gas valve) and WP-26FV (flexible head with gas valve).
  • 12-pcs torch package includes: 200-amp air-cooled WP-26 series torch body with handle, 1-piece type EPDM rubber power cable hose 46V28R (12.5-ft) or 46V30R (25-ft), Nylon cable cover with zipper; Weldcraft style brass cable adapter 45V62 and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps).
  • Premium quality 200-amp air-cooled WP-26 complete TIG welding torch package with 12.5-ft or 25-ft 1-piece rubber power cable for use with most mainstream TIG welders. Shipped as un-assembled.
  • 【Quality assurance】: products have obtained CE, ISO9001 certification, we will provide you with 1 year warranty service。We test the product when we leave the factory. Please don't dismantle it at will
  • 【Note】: when working, it will produce a lot of heat and consume a lot of air. Please do not use it in a closed environment for a long time. When using, try to keep the cylinder upright. After using, please pay attention to protect the thimble at the joint to avoid dust entering or bending to affect the next use
  • 【Easy to use】: our product provides a 1.5M/60 " hose and a hook accessory. You can hang the cylinder on your body for easy operation
  • 【Fuel】:Propane, MAPP, MAP-PRO, threading fits CGA600 US standard ,14.1 OZ MAPP Gas cylinder can be used for 2 hours;
  • 【Widely used】: for precision soldering/brazing, thawing and freezing pipes, large eddy current flame can be used for large diameter brazing, Maximum flame temperature is 1900℃/3600℉, suitable for Soldering up to 3/4"copper pipes;
  • What's Included: 10ft HR-100 MIG gun, 10ft work cable with clamp, Power Cord, Dual-gauge regulator with gas hose, .030 in. contact tips, Quick Select drive roll, Sample spool of flux-cored wire and Material thickness gauge
  • Welding Amperage Range: 25-140 A; 20% duty cycle @ 90 Amps, 19V
  • Operates off 115V standard household current; Wire Feed Speed Range 40-700 IPM, 50-740 IPM at no load
  • Welding Processes: MIG(GMAW), Flux Cored(FCAW)
  • Welds 24 gauge up to 1/4 in mild steel; Weldable Materials: Steel, Stainless Steel and Aluminum
  • 5-position voltage control selector adds a smooth, stable arc at all welding thicknesses
  • Reliable guarantee: obtain CE, ISO9001 certification。We test the product when we leave the factory. Please don't dismantle it at will。
  • Gas Type : MAPP , Propane, LPG; Connection Standard : CGA600;(Oxygen cylinders are not required)
  • Safety: copper joint with automatic ignition device
  • Easy to use: the length of the hose is 1.5M/60 inch, which can meet more adaptive scenarios
  • Ultra high temperature: operating temperature can reach 1900℃/3600℉
  • All cylinder ship empty. Please consult your local compressed gas supplier for filling needs.
  • 7″ diameter, 22.5″ high
  • Thick walled steel tank, with the durability to stand up to any work site
  • New, high-quality 60 cu ft steel inert gas cylinder with CGA580 valve - Helium, Nitrogen, Argon, CO2/Nitrogen Mix
  • Safety, Automatic Protection Function for Over-current, Over-voltage and Over-heating
  • The MIG-205DS is capable of true lift TIG(need buy extra tig lift torch,not included inside product) welding as well as stick welding ,The MIG-205DS is an intuitive synergically designed MIG/MAG/ Flux Core/ARC/Lift TIG welding machine
  • Synergic Control,Automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses
  • IGBT inverter technology, Full 30-205Amp(max) with digital display, reliable quality and stable performance.

More Info

1    2    3    4    5    6    7    8    9    10