Affordable Extra Long Drill Bits. Reviews August, 2021, page 6

COMOWARE Long Drill Bit - 1/4 in. x 12 in. Extra Length Aircraft Black Oxide Drill Bit for Wood, Plastic, Aluminum, PVC, etc…

More from Tools & Home Improvement
Search only COMOWARE brand name
COMOWARE Long Drill Bit - 1/4 in. x 12 in. Extra Length Aircraft Black Oxide Drill Bit for Wood, Plastic, Aluminum, PVC, etc…

Current price: 10.59 USD


Check price and availability


  • Widely Application: Suitable for metal, copper, aluminum, kinds of wood, plastic, MDF, nylon composite materials, etc., especially for general purpose hand drill, allowing you to enter the hard to reach areas, and the normal working length of the drill can not reach.
  • Corrosion Resistance: Black oxide coated for greater wear resistance
  • Easier Drilling: Reduced heat and extended drill bit life. 135 degree split point drills on contact and prevents walking.
  • Extra Long Drill Bit Set: Last 50 percent longer than high-speed steel. It is especially suitable for drilling in areas where the normal working length of the bit can not reach.
  • High-quality Design: Classic M2 High Speed Steel construction with black oxide finish for proven capability and durability.

More Info

REXBETI 20 Piece Hex Head Allen Wrench Screwdriver Bit Set, SAE Metric 1/4 Inch Hex Shank S2 Steel Magnetic 2.3 Inch Long Drill Bits with Storage Box

More from Tools & Home Improvement
Search only REXBETI brand name
REXBETI 20 Piece Hex Head Allen Wrench Screwdriver Bit Set, SAE Metric 1/4 Inch Hex Shank S2 Steel Magnetic 2.3 Inch Long Drill Bits with Storage Box

Current price: 11.99 USD

Saving: $2.00 (14%)


Check price and availability


  • Widely Application: Suitable for metal, copper, aluminum, kinds of wood, plastic, MDF, nylon composite materials, etc., especially for general purpose hand drill, allowing you to enter the hard to reach areas, and the normal working length of the drill can not reach.
  • Corrosion Resistance: Black oxide coated for greater wear resistance
  • Easier Drilling: Reduced heat and extended drill bit life. 135 degree split point drills on contact and prevents walking.
  • Extra Long Drill Bit Set: Last 50 percent longer than high-speed steel. It is especially suitable for drilling in areas where the normal working length of the bit can not reach.
  • High-quality Design: Classic M2 High Speed Steel construction with black oxide finish for proven capability and durability.
  • Not only can you use the bits on hand tools, you can easily insert them to any 1/4 inch hex shank power drill to use solid storage case to keep all bit set in good condition
  • Strong magnetic and high precision. Each edge can be accurately locked screws, no damage to the screw and the screwdriver head
  • Drill bits made from high quality S2 steel material for ultimate durability, suitable for industrial use
  • SAE sizes 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 7/64, 3/32 and 5/64 inch. Metric size 8mm, 7mm, 6mm, 5mm, 4mm, 3.5mm, 3mm, 2.5mm, 2mm and 1.5mm

More Info

Eagle Tool US EA75072 Flex Shank Installer Drill Bit, Auger Style, 3/4-Inch by 72-Inch, Made in the USA

More from Tools & Home Improvement
Search only Eagle Tool US brand name
Eagle Tool US EA75072 Flex Shank Installer Drill Bit, Auger Style, 3/4-Inch by 72-Inch, Made in the USA

Current price: 43.37 USD


Check price and availability


Height: 0.75 inches

Length: 72 Inches

Width: 0.75 Inches

Weight: 1.56 Pounds

Warranty: 30 day maufacturer

  • Widely Application: Suitable for metal, copper, aluminum, kinds of wood, plastic, MDF, nylon composite materials, etc., especially for general purpose hand drill, allowing you to enter the hard to reach areas, and the normal working length of the drill can not reach.
  • Corrosion Resistance: Black oxide coated for greater wear resistance
  • Easier Drilling: Reduced heat and extended drill bit life. 135 degree split point drills on contact and prevents walking.
  • Extra Long Drill Bit Set: Last 50 percent longer than high-speed steel. It is especially suitable for drilling in areas where the normal working length of the bit can not reach.
  • High-quality Design: Classic M2 High Speed Steel construction with black oxide finish for proven capability and durability.
  • Not only can you use the bits on hand tools, you can easily insert them to any 1/4 inch hex shank power drill to use solid storage case to keep all bit set in good condition
  • Strong magnetic and high precision. Each edge can be accurately locked screws, no damage to the screw and the screwdriver head
  • Drill bits made from high quality S2 steel material for ultimate durability, suitable for industrial use
  • SAE sizes 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 7/64, 3/32 and 5/64 inch. Metric size 8mm, 7mm, 6mm, 5mm, 4mm, 3.5mm, 3mm, 2.5mm, 2mm and 1.5mm
  • Made in USA
  • Add a Quick Switch Hex to adapt to a Quick Change chuck part number ETHXKIT250
  • Three flat non-slip grip on the chuck end
  • Flexible spring steel shank with wire fishing accommodation holes in the head and shank
  • Aggressive and self feeding auger point

More Info

BOSCH HC2167 1" x 16" x 18" SDS-Plus Carbide-Tipped Masonry Drill Bit, Gray

More from Tools & Home Improvement
Search only BOSCH brand name
BOSCH HC2167 1

Current price: 29.45 USD


Check price and availability


Height: 21 Inches

Length: 1 Inches

Width: 1 Inches

Weight: 1 Pounds

  • Widely Application: Suitable for metal, copper, aluminum, kinds of wood, plastic, MDF, nylon composite materials, etc., especially for general purpose hand drill, allowing you to enter the hard to reach areas, and the normal working length of the drill can not reach.
  • Corrosion Resistance: Black oxide coated for greater wear resistance
  • Easier Drilling: Reduced heat and extended drill bit life. 135 degree split point drills on contact and prevents walking.
  • Extra Long Drill Bit Set: Last 50 percent longer than high-speed steel. It is especially suitable for drilling in areas where the normal working length of the bit can not reach.
  • High-quality Design: Classic M2 High Speed Steel construction with black oxide finish for proven capability and durability.
  • Not only can you use the bits on hand tools, you can easily insert them to any 1/4 inch hex shank power drill to use solid storage case to keep all bit set in good condition
  • Strong magnetic and high precision. Each edge can be accurately locked screws, no damage to the screw and the screwdriver head
  • Drill bits made from high quality S2 steel material for ultimate durability, suitable for industrial use
  • SAE sizes 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 7/64, 3/32 and 5/64 inch. Metric size 8mm, 7mm, 6mm, 5mm, 4mm, 3.5mm, 3mm, 2.5mm, 2mm and 1.5mm
  • Made in USA
  • Add a Quick Switch Hex to adapt to a Quick Change chuck part number ETHXKIT250
  • Three flat non-slip grip on the chuck end
  • Flexible spring steel shank with wire fishing accommodation holes in the head and shank
  • Aggressive and self feeding auger point
  • Ideal for anchoring and through-hole applications in concrete
  • Proprietary Bosch hardening process results in more holes per bit
  • Bosch-made carbide tip is tougher and more durable under heavy loads
  • 15-Percent faster (compared to S4L)
  • Optimized brazing and hardening process for long life

More Info

10 Piece Masonry Drill Bits Set (Tile, Brick, Cement, Concrete, Glass, Ceramic POTS, CINDERBLOCK, & Wood) Chrome Plated with Industrial Strength Carbide Tips - Bonus Storage CASE Included

More from Tools & Home Improvement
Search only Owl Tools brand name
10 Piece Masonry Drill Bits Set (Tile, Brick, Cement, Concrete, Glass, Ceramic POTS, CINDERBLOCK, & Wood) Chrome Plated with Industrial Strength Carbide Tips - Bonus Storage CASE Included

Current price: 14.99 USD


Check price and availability


Weight: 0.8 Pounds

  • Widely Application: Suitable for metal, copper, aluminum, kinds of wood, plastic, MDF, nylon composite materials, etc., especially for general purpose hand drill, allowing you to enter the hard to reach areas, and the normal working length of the drill can not reach.
  • Corrosion Resistance: Black oxide coated for greater wear resistance
  • Easier Drilling: Reduced heat and extended drill bit life. 135 degree split point drills on contact and prevents walking.
  • Extra Long Drill Bit Set: Last 50 percent longer than high-speed steel. It is especially suitable for drilling in areas where the normal working length of the bit can not reach.
  • High-quality Design: Classic M2 High Speed Steel construction with black oxide finish for proven capability and durability.
  • Not only can you use the bits on hand tools, you can easily insert them to any 1/4 inch hex shank power drill to use solid storage case to keep all bit set in good condition
  • Strong magnetic and high precision. Each edge can be accurately locked screws, no damage to the screw and the screwdriver head
  • Drill bits made from high quality S2 steel material for ultimate durability, suitable for industrial use
  • SAE sizes 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 7/64, 3/32 and 5/64 inch. Metric size 8mm, 7mm, 6mm, 5mm, 4mm, 3.5mm, 3mm, 2.5mm, 2mm and 1.5mm
  • Made in USA
  • Add a Quick Switch Hex to adapt to a Quick Change chuck part number ETHXKIT250
  • Three flat non-slip grip on the chuck end
  • Flexible spring steel shank with wire fishing accommodation holes in the head and shank
  • Aggressive and self feeding auger point
  • Ideal for anchoring and through-hole applications in concrete
  • Proprietary Bosch hardening process results in more holes per bit
  • Bosch-made carbide tip is tougher and more durable under heavy loads
  • 15-Percent faster (compared to S4L)
  • Optimized brazing and hardening process for long life
  • LIFETIME GUARANTEE - Here at Owl Tools (USA Based Company) we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
  • INCLUDES THE FOLLOWING SIZES - 1/8" (3 INCH LENGTH - 2 INCLUDED), 1/4" (4" LENGTH - 2 INCLUDED), 1/4" (6" LENGTH - 2 INCLUDED), 5/16 (6" LENGTH), 3/8" (6" LENGTH - 2 INCLUDED), and 1/2" (6" LENGTH)
  • CONVENIENT STORAGE CASE - Keeps Your Masonry Drill Bits Safe & Organized in a Rust-Free Hard Plastic Container
  • DURABLE INDUSTRIAL GRADE CARBIDE TIPS - Carbide Tipped Drill Bits Are Built For Longevity and Will Stay Sharper Much Longer Than You're Typical Steel Drill Bit
  • MULTI-MATERIAL DRILL BITS - Easily Drills through Ceramic Tile, Glass, Cinderblock, Hard Plastic, Cement, Concrete, Mirrors, Windows, Travertine, Brick, Wood, and So Much More!

More Info

Fulton 10 inch Long Forstner Bit Extension for Adding Over 8" of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)

More from Tools & Home Improvement
Search only Fulton brand name
Fulton 10 inch Long Forstner Bit Extension for Adding Over 8

Current price: 16.99 USD

Saving: $3.00 (15%)


Check price and availability


  • Widely Application: Suitable for metal, copper, aluminum, kinds of wood, plastic, MDF, nylon composite materials, etc., especially for general purpose hand drill, allowing you to enter the hard to reach areas, and the normal working length of the drill can not reach.
  • Corrosion Resistance: Black oxide coated for greater wear resistance
  • Easier Drilling: Reduced heat and extended drill bit life. 135 degree split point drills on contact and prevents walking.
  • Extra Long Drill Bit Set: Last 50 percent longer than high-speed steel. It is especially suitable for drilling in areas where the normal working length of the bit can not reach.
  • High-quality Design: Classic M2 High Speed Steel construction with black oxide finish for proven capability and durability.
  • Not only can you use the bits on hand tools, you can easily insert them to any 1/4 inch hex shank power drill to use solid storage case to keep all bit set in good condition
  • Strong magnetic and high precision. Each edge can be accurately locked screws, no damage to the screw and the screwdriver head
  • Drill bits made from high quality S2 steel material for ultimate durability, suitable for industrial use
  • SAE sizes 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 7/64, 3/32 and 5/64 inch. Metric size 8mm, 7mm, 6mm, 5mm, 4mm, 3.5mm, 3mm, 2.5mm, 2mm and 1.5mm
  • Made in USA
  • Add a Quick Switch Hex to adapt to a Quick Change chuck part number ETHXKIT250
  • Three flat non-slip grip on the chuck end
  • Flexible spring steel shank with wire fishing accommodation holes in the head and shank
  • Aggressive and self feeding auger point
  • Ideal for anchoring and through-hole applications in concrete
  • Proprietary Bosch hardening process results in more holes per bit
  • Bosch-made carbide tip is tougher and more durable under heavy loads
  • 15-Percent faster (compared to S4L)
  • Optimized brazing and hardening process for long life
  • LIFETIME GUARANTEE - Here at Owl Tools (USA Based Company) we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
  • INCLUDES THE FOLLOWING SIZES - 1/8" (3 INCH LENGTH - 2 INCLUDED), 1/4" (4" LENGTH - 2 INCLUDED), 1/4" (6" LENGTH - 2 INCLUDED), 5/16 (6" LENGTH), 3/8" (6" LENGTH - 2 INCLUDED), and 1/2" (6" LENGTH)
  • CONVENIENT STORAGE CASE - Keeps Your Masonry Drill Bits Safe & Organized in a Rust-Free Hard Plastic Container
  • DURABLE INDUSTRIAL GRADE CARBIDE TIPS - Carbide Tipped Drill Bits Are Built For Longevity and Will Stay Sharper Much Longer Than You're Typical Steel Drill Bit
  • MULTI-MATERIAL DRILL BITS - Easily Drills through Ceramic Tile, Glass, Cinderblock, Hard Plastic, Cement, Concrete, Mirrors, Windows, Travertine, Brick, Wood, and So Much More!
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.

More Info

MAGBIT 704.1216 MAG704 3/4-Inch by 13-Inch Single Spur Auger Bit

More from Tools & Home Improvement
Search only MAGBIT brand name
MAGBIT 704.1216 MAG704 3/4-Inch by 13-Inch Single Spur Auger Bit

Current price: 16.91 USD


Check price and availability


Warranty: Return defective products to place of purchase for exchange or credit. Warranty does not apply to damage caused by abuse, misuse or alteration.

  • Widely Application: Suitable for metal, copper, aluminum, kinds of wood, plastic, MDF, nylon composite materials, etc., especially for general purpose hand drill, allowing you to enter the hard to reach areas, and the normal working length of the drill can not reach.
  • Corrosion Resistance: Black oxide coated for greater wear resistance
  • Easier Drilling: Reduced heat and extended drill bit life. 135 degree split point drills on contact and prevents walking.
  • Extra Long Drill Bit Set: Last 50 percent longer than high-speed steel. It is especially suitable for drilling in areas where the normal working length of the bit can not reach.
  • High-quality Design: Classic M2 High Speed Steel construction with black oxide finish for proven capability and durability.
  • Not only can you use the bits on hand tools, you can easily insert them to any 1/4 inch hex shank power drill to use solid storage case to keep all bit set in good condition
  • Strong magnetic and high precision. Each edge can be accurately locked screws, no damage to the screw and the screwdriver head
  • Drill bits made from high quality S2 steel material for ultimate durability, suitable for industrial use
  • SAE sizes 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 7/64, 3/32 and 5/64 inch. Metric size 8mm, 7mm, 6mm, 5mm, 4mm, 3.5mm, 3mm, 2.5mm, 2mm and 1.5mm
  • Made in USA
  • Add a Quick Switch Hex to adapt to a Quick Change chuck part number ETHXKIT250
  • Three flat non-slip grip on the chuck end
  • Flexible spring steel shank with wire fishing accommodation holes in the head and shank
  • Aggressive and self feeding auger point
  • Ideal for anchoring and through-hole applications in concrete
  • Proprietary Bosch hardening process results in more holes per bit
  • Bosch-made carbide tip is tougher and more durable under heavy loads
  • 15-Percent faster (compared to S4L)
  • Optimized brazing and hardening process for long life
  • LIFETIME GUARANTEE - Here at Owl Tools (USA Based Company) we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
  • INCLUDES THE FOLLOWING SIZES - 1/8" (3 INCH LENGTH - 2 INCLUDED), 1/4" (4" LENGTH - 2 INCLUDED), 1/4" (6" LENGTH - 2 INCLUDED), 5/16 (6" LENGTH), 3/8" (6" LENGTH - 2 INCLUDED), and 1/2" (6" LENGTH)
  • CONVENIENT STORAGE CASE - Keeps Your Masonry Drill Bits Safe & Organized in a Rust-Free Hard Plastic Container
  • DURABLE INDUSTRIAL GRADE CARBIDE TIPS - Carbide Tipped Drill Bits Are Built For Longevity and Will Stay Sharper Much Longer Than You're Typical Steel Drill Bit
  • MULTI-MATERIAL DRILL BITS - Easily Drills through Ceramic Tile, Glass, Cinderblock, Hard Plastic, Cement, Concrete, Mirrors, Windows, Travertine, Brick, Wood, and So Much More!
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • Machined on a center post for a stronger more rigid bit
  • self feeding screw point for faster hole starts and easier cutting
  • Quick change 7/16-Inch hex shank for use in quick change chucks or standard chucks
  • Use when a 6-Inch bit is too short and 18-Inch is too long for the hole
  • High grade steel 1045 carbon steel for a longer life

More Info

IRWIN 1890707 Straight Shank Installer Drill Bit for Wood, 18-Inch by 1/4-Inch

More from Tools & Home Improvement
Search only Irwin Tools brand name
IRWIN 1890707 Straight Shank Installer Drill Bit for Wood, 18-Inch by 1/4-Inch

Current price: 13.06 USD


Check price and availability


Height: 7.87 Inches

Length: 18.748031496063 Inches

Width: 7.87 Inches

Weight: 0.2 Pounds

  • Widely Application: Suitable for metal, copper, aluminum, kinds of wood, plastic, MDF, nylon composite materials, etc., especially for general purpose hand drill, allowing you to enter the hard to reach areas, and the normal working length of the drill can not reach.
  • Corrosion Resistance: Black oxide coated for greater wear resistance
  • Easier Drilling: Reduced heat and extended drill bit life. 135 degree split point drills on contact and prevents walking.
  • Extra Long Drill Bit Set: Last 50 percent longer than high-speed steel. It is especially suitable for drilling in areas where the normal working length of the bit can not reach.
  • High-quality Design: Classic M2 High Speed Steel construction with black oxide finish for proven capability and durability.
  • Not only can you use the bits on hand tools, you can easily insert them to any 1/4 inch hex shank power drill to use solid storage case to keep all bit set in good condition
  • Strong magnetic and high precision. Each edge can be accurately locked screws, no damage to the screw and the screwdriver head
  • Drill bits made from high quality S2 steel material for ultimate durability, suitable for industrial use
  • SAE sizes 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 7/64, 3/32 and 5/64 inch. Metric size 8mm, 7mm, 6mm, 5mm, 4mm, 3.5mm, 3mm, 2.5mm, 2mm and 1.5mm
  • Made in USA
  • Add a Quick Switch Hex to adapt to a Quick Change chuck part number ETHXKIT250
  • Three flat non-slip grip on the chuck end
  • Flexible spring steel shank with wire fishing accommodation holes in the head and shank
  • Aggressive and self feeding auger point
  • Ideal for anchoring and through-hole applications in concrete
  • Proprietary Bosch hardening process results in more holes per bit
  • Bosch-made carbide tip is tougher and more durable under heavy loads
  • 15-Percent faster (compared to S4L)
  • Optimized brazing and hardening process for long life
  • LIFETIME GUARANTEE - Here at Owl Tools (USA Based Company) we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
  • INCLUDES THE FOLLOWING SIZES - 1/8" (3 INCH LENGTH - 2 INCLUDED), 1/4" (4" LENGTH - 2 INCLUDED), 1/4" (6" LENGTH - 2 INCLUDED), 5/16 (6" LENGTH), 3/8" (6" LENGTH - 2 INCLUDED), and 1/2" (6" LENGTH)
  • CONVENIENT STORAGE CASE - Keeps Your Masonry Drill Bits Safe & Organized in a Rust-Free Hard Plastic Container
  • DURABLE INDUSTRIAL GRADE CARBIDE TIPS - Carbide Tipped Drill Bits Are Built For Longevity and Will Stay Sharper Much Longer Than You're Typical Steel Drill Bit
  • MULTI-MATERIAL DRILL BITS - Easily Drills through Ceramic Tile, Glass, Cinderblock, Hard Plastic, Cement, Concrete, Mirrors, Windows, Travertine, Brick, Wood, and So Much More!
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • Machined on a center post for a stronger more rigid bit
  • self feeding screw point for faster hole starts and easier cutting
  • Quick change 7/16-Inch hex shank for use in quick change chucks or standard chucks
  • Use when a 6-Inch bit is too short and 18-Inch is too long for the hole
  • High grade steel 1045 carbon steel for a longer life
  • Premium high carbon steel construction for extended drilling life in wood
  • 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling Hole not included on 12" length bits
  • Hole in flute for easy wire pulling through walls, ceilings and floors
  • 82˚ point for fast, smooth drilling in wood

More Info

NEIKO 10043A Extra Long Bits | 12” Long Phillips and Flathead Screwdriver Bit | Power Driver Bit Set | 1/4" Shank

More from Tools & Home Improvement
Search only Neiko brand name
NEIKO 10043A Extra Long Bits | 12” Long Phillips and Flathead Screwdriver Bit | Power Driver Bit Set | 1/4

Current price: 13.99 USD

Saving: $1.00 (7%)


Check price and availability


Height: 1.38 Inches

Length: 6.1 Inches

Width: 6.1 Inches

  • Widely Application: Suitable for metal, copper, aluminum, kinds of wood, plastic, MDF, nylon composite materials, etc., especially for general purpose hand drill, allowing you to enter the hard to reach areas, and the normal working length of the drill can not reach.
  • Corrosion Resistance: Black oxide coated for greater wear resistance
  • Easier Drilling: Reduced heat and extended drill bit life. 135 degree split point drills on contact and prevents walking.
  • Extra Long Drill Bit Set: Last 50 percent longer than high-speed steel. It is especially suitable for drilling in areas where the normal working length of the bit can not reach.
  • High-quality Design: Classic M2 High Speed Steel construction with black oxide finish for proven capability and durability.
  • Not only can you use the bits on hand tools, you can easily insert them to any 1/4 inch hex shank power drill to use solid storage case to keep all bit set in good condition
  • Strong magnetic and high precision. Each edge can be accurately locked screws, no damage to the screw and the screwdriver head
  • Drill bits made from high quality S2 steel material for ultimate durability, suitable for industrial use
  • SAE sizes 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 7/64, 3/32 and 5/64 inch. Metric size 8mm, 7mm, 6mm, 5mm, 4mm, 3.5mm, 3mm, 2.5mm, 2mm and 1.5mm
  • Made in USA
  • Add a Quick Switch Hex to adapt to a Quick Change chuck part number ETHXKIT250
  • Three flat non-slip grip on the chuck end
  • Flexible spring steel shank with wire fishing accommodation holes in the head and shank
  • Aggressive and self feeding auger point
  • Ideal for anchoring and through-hole applications in concrete
  • Proprietary Bosch hardening process results in more holes per bit
  • Bosch-made carbide tip is tougher and more durable under heavy loads
  • 15-Percent faster (compared to S4L)
  • Optimized brazing and hardening process for long life
  • LIFETIME GUARANTEE - Here at Owl Tools (USA Based Company) we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
  • INCLUDES THE FOLLOWING SIZES - 1/8" (3 INCH LENGTH - 2 INCLUDED), 1/4" (4" LENGTH - 2 INCLUDED), 1/4" (6" LENGTH - 2 INCLUDED), 5/16 (6" LENGTH), 3/8" (6" LENGTH - 2 INCLUDED), and 1/2" (6" LENGTH)
  • CONVENIENT STORAGE CASE - Keeps Your Masonry Drill Bits Safe & Organized in a Rust-Free Hard Plastic Container
  • DURABLE INDUSTRIAL GRADE CARBIDE TIPS - Carbide Tipped Drill Bits Are Built For Longevity and Will Stay Sharper Much Longer Than You're Typical Steel Drill Bit
  • MULTI-MATERIAL DRILL BITS - Easily Drills through Ceramic Tile, Glass, Cinderblock, Hard Plastic, Cement, Concrete, Mirrors, Windows, Travertine, Brick, Wood, and So Much More!
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • Machined on a center post for a stronger more rigid bit
  • self feeding screw point for faster hole starts and easier cutting
  • Quick change 7/16-Inch hex shank for use in quick change chucks or standard chucks
  • Use when a 6-Inch bit is too short and 18-Inch is too long for the hole
  • High grade steel 1045 carbon steel for a longer life
  • Premium high carbon steel construction for extended drilling life in wood
  • 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling Hole not included on 12" length bits
  • Hole in flute for easy wire pulling through walls, ceilings and floors
  • 82˚ point for fast, smooth drilling in wood
  • [INCLUDES]: Durable plastic pouch for carrying and storage that easily hangs on a tool bench.
  • [LONG REACH]: Quarter inch hex shank allows bits to be mounted on a power drill or die grinder and shank shape prevents slippage and loss of torque.
  • [CONVENIENT]: Twelve inch extra long screwdriver bits give you added length to work with hard-to-reach screws.
  • [DURABLE]: Made from hardened, heat treated chrome vanadium steel for increased durability and long service life.
  • [QUALITY]: Set of five 12-inch screwdriver bits that includes: three Phillips (PH# 1, 2, 3) and two slotted (flat head 3/16 and ¼-inch) bits.

More Info

QWORK 1" x 17" Hardened Alloy Steel Ship Auger for Wood Drilling

More from Tools & Home Improvement
Search only QWORK brand name
QWORK 1

Current price: 22.98 USD


Check price and availability


  • Widely Application: Suitable for metal, copper, aluminum, kinds of wood, plastic, MDF, nylon composite materials, etc., especially for general purpose hand drill, allowing you to enter the hard to reach areas, and the normal working length of the drill can not reach.
  • Corrosion Resistance: Black oxide coated for greater wear resistance
  • Easier Drilling: Reduced heat and extended drill bit life. 135 degree split point drills on contact and prevents walking.
  • Extra Long Drill Bit Set: Last 50 percent longer than high-speed steel. It is especially suitable for drilling in areas where the normal working length of the bit can not reach.
  • High-quality Design: Classic M2 High Speed Steel construction with black oxide finish for proven capability and durability.
  • Not only can you use the bits on hand tools, you can easily insert them to any 1/4 inch hex shank power drill to use solid storage case to keep all bit set in good condition
  • Strong magnetic and high precision. Each edge can be accurately locked screws, no damage to the screw and the screwdriver head
  • Drill bits made from high quality S2 steel material for ultimate durability, suitable for industrial use
  • SAE sizes 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 7/64, 3/32 and 5/64 inch. Metric size 8mm, 7mm, 6mm, 5mm, 4mm, 3.5mm, 3mm, 2.5mm, 2mm and 1.5mm
  • Made in USA
  • Add a Quick Switch Hex to adapt to a Quick Change chuck part number ETHXKIT250
  • Three flat non-slip grip on the chuck end
  • Flexible spring steel shank with wire fishing accommodation holes in the head and shank
  • Aggressive and self feeding auger point
  • Ideal for anchoring and through-hole applications in concrete
  • Proprietary Bosch hardening process results in more holes per bit
  • Bosch-made carbide tip is tougher and more durable under heavy loads
  • 15-Percent faster (compared to S4L)
  • Optimized brazing and hardening process for long life
  • LIFETIME GUARANTEE - Here at Owl Tools (USA Based Company) we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
  • INCLUDES THE FOLLOWING SIZES - 1/8" (3 INCH LENGTH - 2 INCLUDED), 1/4" (4" LENGTH - 2 INCLUDED), 1/4" (6" LENGTH - 2 INCLUDED), 5/16 (6" LENGTH), 3/8" (6" LENGTH - 2 INCLUDED), and 1/2" (6" LENGTH)
  • CONVENIENT STORAGE CASE - Keeps Your Masonry Drill Bits Safe & Organized in a Rust-Free Hard Plastic Container
  • DURABLE INDUSTRIAL GRADE CARBIDE TIPS - Carbide Tipped Drill Bits Are Built For Longevity and Will Stay Sharper Much Longer Than You're Typical Steel Drill Bit
  • MULTI-MATERIAL DRILL BITS - Easily Drills through Ceramic Tile, Glass, Cinderblock, Hard Plastic, Cement, Concrete, Mirrors, Windows, Travertine, Brick, Wood, and So Much More!
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • Machined on a center post for a stronger more rigid bit
  • self feeding screw point for faster hole starts and easier cutting
  • Quick change 7/16-Inch hex shank for use in quick change chucks or standard chucks
  • Use when a 6-Inch bit is too short and 18-Inch is too long for the hole
  • High grade steel 1045 carbon steel for a longer life
  • Premium high carbon steel construction for extended drilling life in wood
  • 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling Hole not included on 12" length bits
  • Hole in flute for easy wire pulling through walls, ceilings and floors
  • 82˚ point for fast, smooth drilling in wood
  • [INCLUDES]: Durable plastic pouch for carrying and storage that easily hangs on a tool bench.
  • [LONG REACH]: Quarter inch hex shank allows bits to be mounted on a power drill or die grinder and shank shape prevents slippage and loss of torque.
  • [CONVENIENT]: Twelve inch extra long screwdriver bits give you added length to work with hard-to-reach screws.
  • [DURABLE]: Made from hardened, heat treated chrome vanadium steel for increased durability and long service life.
  • [QUALITY]: Set of five 12-inch screwdriver bits that includes: three Phillips (PH# 1, 2, 3) and two slotted (flat head 3/16 and ¼-inch) bits.
  • 100% Satisfied Service: Each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you.
  • Widely Usage - It is an ideal way for drilling in most kinds of woods.
  • Design - With the solid center flutes, it can keep stability when drilling and will not easy to move or break. The directional bit can bore the hole precisely.
  • Function - It can effortlessly bore holes in wood. When it meets nail, it can cut through the nail without damaging.
  • High Quality - Made of hardened alloy steel, this ship auger bit is durable and stable for a long time using.

More Info

1    2    3    4    5    6    7    8    9    10