High rated Extra Long Drill Bits. Reviews August, 2021, page 1

Neiko 10047A 12” Extra Long Drill Bit Set, 5 Piece | 1/8", 3/16", 1/4", 5/16", 3/8"

More from Tools & Home Improvement
Search only Neiko brand name
Neiko 10047A 12” Extra Long Drill Bit Set, 5 Piece | 1/8

Current price: 15.95 USD

Saving: $3.04 (16%)


Check price and availability


Height: 2.8 Inches

Length: 13 Inches

Width: 3.1 Inches

  • Includes a full set of standard sizes to meet every job’s need: 1/8-inch, 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and many more
  • High hardness and sharp pointed tips punctures tough material with ease for a smooth drilling finish
  • Extra-long 12-inch body provides more stability when balance during quick operation to ensure position is in tact
  • High speed steel construction is designed for durability and extends tool life

More Info

12" Long Brad Point Bit Set (7 Drill Bit Set). Perfect for Drilling Wood, Plastic, Drywall and Composite Materials

More from Tools & Home Improvement
Search only Fulton brand name
12

Current price: 20.49 USD

Saving: $4.50 (18%)


Check price and availability


  • Includes a full set of standard sizes to meet every job’s need: 1/8-inch, 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and many more
  • High hardness and sharp pointed tips punctures tough material with ease for a smooth drilling finish
  • Extra-long 12-inch body provides more stability when balance during quick operation to ensure position is in tact
  • High speed steel construction is designed for durability and extends tool life
  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.

More Info

COMOWARE 12“ Extra Long Brad Point Drill Bit Set - 300mm Carbon Steel Wood Drill Bit Set for Hardwood, Plywood, Plastic, 7Pcs | 1/8'', 3/16'', 1/4'', 5/16'', 3/8'', 7/16'', 1/2''

More from Tools & Home Improvement
Search only COMOWARE brand name
COMOWARE 12“ Extra Long Brad Point Drill Bit Set - 300mm Carbon Steel Wood Drill Bit Set for Hardwood, Plywood, Plastic, 7Pcs | 1/8'', 3/16'', 1/4'', 5/16'', 3/8'', 7/16'', 1/2''

Current price: 19.99 USD


Check price and availability


  • Includes a full set of standard sizes to meet every job’s need: 1/8-inch, 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and many more
  • High hardness and sharp pointed tips punctures tough material with ease for a smooth drilling finish
  • Extra-long 12-inch body provides more stability when balance during quick operation to ensure position is in tact
  • High speed steel construction is designed for durability and extends tool life
  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • MULTIPURPOSE & LIFETIME GUARANTEE: Suitable for bench drill, hand drill and conventional electric drill. Perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber etc. Set includes the drill bit holder for easy storage and organizing. We only care about your satisfaction. We stand behind all of our high quality products so we offer a No Question Asked on our Drill Bit Set. Please contact us (through Amazon if past the standard return window) and we will be pleased to assist you
  • FULL SET OF STANDARD SIZE: With the drill bits we offered, you can process 7 different diameter holes, ( Round shank| 1/8'', 3/16'', 1/4'', 5/16'', 3/8'' Reduced Shank| 7/16'', 1/2'' ), which meet your different needs perfectly.
  • Brad-Point Design -The Brad-Point Design can penetrate surface quickly because of the sharp point on the tip. This allows the user to pinpoint the mark with the drill bit. Better in CENTERING and NO SKID.
  • HIGH QUALITY MATERIAL: Classic Carbon Steel Material for fast cutting against tough wood material. High hardness, offer superior cutting power and durable.
  • EXTRA LONG LENGTH & 2 TYPE SHANK: Extra long 300mm body provides better stability and balance during quick operation to ensure position is intact. Flute length is 180mm with ROUND shank and REDUCED shank.

More Info

MAGBIT MAG 777 1/2 inch x 72 inch Fish Bit

More from Tools & Home Improvement
Search only MAGBIT brand name
MAGBIT MAG 777 1/2 inch x 72 inch Fish Bit

Current price: 37.02 USD


Check price and availability


Height: 2.25 Inches

Length: 73 Inches

Width: 2.25 Inches

Warranty: Return defective products to place of purchase for exchange or credit. Warranty does not apply to damage caused by abuse, misuse or alteration.

  • Includes a full set of standard sizes to meet every job’s need: 1/8-inch, 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and many more
  • High hardness and sharp pointed tips punctures tough material with ease for a smooth drilling finish
  • Extra-long 12-inch body provides more stability when balance during quick operation to ensure position is in tact
  • High speed steel construction is designed for durability and extends tool life
  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • MULTIPURPOSE & LIFETIME GUARANTEE: Suitable for bench drill, hand drill and conventional electric drill. Perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber etc. Set includes the drill bit holder for easy storage and organizing. We only care about your satisfaction. We stand behind all of our high quality products so we offer a No Question Asked on our Drill Bit Set. Please contact us (through Amazon if past the standard return window) and we will be pleased to assist you
  • FULL SET OF STANDARD SIZE: With the drill bits we offered, you can process 7 different diameter holes, ( Round shank| 1/8'', 3/16'', 1/4'', 5/16'', 3/8'' Reduced Shank| 7/16'', 1/2'' ), which meet your different needs perfectly.
  • Brad-Point Design -The Brad-Point Design can penetrate surface quickly because of the sharp point on the tip. This allows the user to pinpoint the mark with the drill bit. Better in CENTERING and NO SKID.
  • HIGH QUALITY MATERIAL: Classic Carbon Steel Material for fast cutting against tough wood material. High hardness, offer superior cutting power and durable.
  • EXTRA LONG LENGTH & 2 TYPE SHANK: Extra long 300mm body provides better stability and balance during quick operation to ensure position is intact. Flute length is 180mm with ROUND shank and REDUCED shank.
  • Fish eye hole provided near tip of flutes to aid in pulling wire inside wall cavity from either direction after drilling, with no damage to the wall
  • Drills holes down the length of wall cavity
  • Self feeding screw point
  • Fish eye holes at both ends
  • Flexible shaft

More Info

Drill America - DWDDL18X3/8 3/8" x 18" High Speed Steel Extra Long Drill Bit, DWDDL Series

More from Tools & Home Improvement
Search only Drill America brand name
Drill America - DWDDL18X3/8 3/8

Current price: 26.28 USD


Check price and availability


  • Includes a full set of standard sizes to meet every job’s need: 1/8-inch, 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and many more
  • High hardness and sharp pointed tips punctures tough material with ease for a smooth drilling finish
  • Extra-long 12-inch body provides more stability when balance during quick operation to ensure position is in tact
  • High speed steel construction is designed for durability and extends tool life
  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • MULTIPURPOSE & LIFETIME GUARANTEE: Suitable for bench drill, hand drill and conventional electric drill. Perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber etc. Set includes the drill bit holder for easy storage and organizing. We only care about your satisfaction. We stand behind all of our high quality products so we offer a No Question Asked on our Drill Bit Set. Please contact us (through Amazon if past the standard return window) and we will be pleased to assist you
  • FULL SET OF STANDARD SIZE: With the drill bits we offered, you can process 7 different diameter holes, ( Round shank| 1/8'', 3/16'', 1/4'', 5/16'', 3/8'' Reduced Shank| 7/16'', 1/2'' ), which meet your different needs perfectly.
  • Brad-Point Design -The Brad-Point Design can penetrate surface quickly because of the sharp point on the tip. This allows the user to pinpoint the mark with the drill bit. Better in CENTERING and NO SKID.
  • HIGH QUALITY MATERIAL: Classic Carbon Steel Material for fast cutting against tough wood material. High hardness, offer superior cutting power and durable.
  • EXTRA LONG LENGTH & 2 TYPE SHANK: Extra long 300mm body provides better stability and balance during quick operation to ensure position is intact. Flute length is 180mm with ROUND shank and REDUCED shank.
  • Fish eye hole provided near tip of flutes to aid in pulling wire inside wall cavity from either direction after drilling, with no damage to the wall
  • Drills holes down the length of wall cavity
  • Self feeding screw point
  • Fish eye holes at both ends
  • Flexible shaft
  • For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

BOSCH BL2739 3/16 In. x 12 In. Extra Length Aircraft Black Oxide Drill Bit

More from Tools & Home Improvement
Search only BOSCH brand name
BOSCH BL2739 3/16 In. x 12 In. Extra Length Aircraft Black Oxide Drill Bit

Current price: 4.99 USD

Saving: $3.39 (40%)


Check price and availability


Warranty: No

  • Includes a full set of standard sizes to meet every job’s need: 1/8-inch, 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and many more
  • High hardness and sharp pointed tips punctures tough material with ease for a smooth drilling finish
  • Extra-long 12-inch body provides more stability when balance during quick operation to ensure position is in tact
  • High speed steel construction is designed for durability and extends tool life
  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • MULTIPURPOSE & LIFETIME GUARANTEE: Suitable for bench drill, hand drill and conventional electric drill. Perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber etc. Set includes the drill bit holder for easy storage and organizing. We only care about your satisfaction. We stand behind all of our high quality products so we offer a No Question Asked on our Drill Bit Set. Please contact us (through Amazon if past the standard return window) and we will be pleased to assist you
  • FULL SET OF STANDARD SIZE: With the drill bits we offered, you can process 7 different diameter holes, ( Round shank| 1/8'', 3/16'', 1/4'', 5/16'', 3/8'' Reduced Shank| 7/16'', 1/2'' ), which meet your different needs perfectly.
  • Brad-Point Design -The Brad-Point Design can penetrate surface quickly because of the sharp point on the tip. This allows the user to pinpoint the mark with the drill bit. Better in CENTERING and NO SKID.
  • HIGH QUALITY MATERIAL: Classic Carbon Steel Material for fast cutting against tough wood material. High hardness, offer superior cutting power and durable.
  • EXTRA LONG LENGTH & 2 TYPE SHANK: Extra long 300mm body provides better stability and balance during quick operation to ensure position is intact. Flute length is 180mm with ROUND shank and REDUCED shank.
  • Fish eye hole provided near tip of flutes to aid in pulling wire inside wall cavity from either direction after drilling, with no damage to the wall
  • Drills holes down the length of wall cavity
  • Self feeding screw point
  • Fish eye holes at both ends
  • Flexible shaft
  • For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1 2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits

More Info

8 Pcs 200mm Extra Long Twist Drill Bits for Steel Straight Shank Tool Sets Wood Plastic and Aluminum, Plastic, Jewelry 2mm - 7mm

More from Tools & Home Improvement
Search only DUDUA brand name
8 Pcs 200mm Extra Long Twist Drill Bits for Steel Straight Shank Tool Sets Wood Plastic and Aluminum, Plastic, Jewelry 2mm - 7mm

Current price: 11.99 USD


Check price and availability


  • Includes a full set of standard sizes to meet every job’s need: 1/8-inch, 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and many more
  • High hardness and sharp pointed tips punctures tough material with ease for a smooth drilling finish
  • Extra-long 12-inch body provides more stability when balance during quick operation to ensure position is in tact
  • High speed steel construction is designed for durability and extends tool life
  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • MULTIPURPOSE & LIFETIME GUARANTEE: Suitable for bench drill, hand drill and conventional electric drill. Perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber etc. Set includes the drill bit holder for easy storage and organizing. We only care about your satisfaction. We stand behind all of our high quality products so we offer a No Question Asked on our Drill Bit Set. Please contact us (through Amazon if past the standard return window) and we will be pleased to assist you
  • FULL SET OF STANDARD SIZE: With the drill bits we offered, you can process 7 different diameter holes, ( Round shank| 1/8'', 3/16'', 1/4'', 5/16'', 3/8'' Reduced Shank| 7/16'', 1/2'' ), which meet your different needs perfectly.
  • Brad-Point Design -The Brad-Point Design can penetrate surface quickly because of the sharp point on the tip. This allows the user to pinpoint the mark with the drill bit. Better in CENTERING and NO SKID.
  • HIGH QUALITY MATERIAL: Classic Carbon Steel Material for fast cutting against tough wood material. High hardness, offer superior cutting power and durable.
  • EXTRA LONG LENGTH & 2 TYPE SHANK: Extra long 300mm body provides better stability and balance during quick operation to ensure position is intact. Flute length is 180mm with ROUND shank and REDUCED shank.
  • Fish eye hole provided near tip of flutes to aid in pulling wire inside wall cavity from either direction after drilling, with no damage to the wall
  • Drills holes down the length of wall cavity
  • Self feeding screw point
  • Fish eye holes at both ends
  • Flexible shaft
  • For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1 2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • Suitable for many electric drills and drills
  • provides better stability and balance during quick operation to ensure position is intact
  • Quantity:This set includes 8 pieces drill bit in different sizes of the most popular drill bits.1 pc/per size.
  • Application:drill bits kit are great for most drilling jobs and materials such as aluminum, wood, plastics PVC and other different materials or your daily drill use.
  • Diameter: 2mm 2.5mm 3mm 4mm 4.5mm 5mm 6mm 7mm.Length:about 200mm(about 7.8 inch)

More Info

13Pc 1/16"-1/4" x 64ths 6" Inch Long Aircraft Extension Drill Set

More from Tools & Home Improvement
Search only LLDSIMEX brand name
13Pc 1/16

Current price: 21.99 USD


Check price and availability


Weight: 1.10231131 Pounds

  • Includes a full set of standard sizes to meet every job’s need: 1/8-inch, 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and many more
  • High hardness and sharp pointed tips punctures tough material with ease for a smooth drilling finish
  • Extra-long 12-inch body provides more stability when balance during quick operation to ensure position is in tact
  • High speed steel construction is designed for durability and extends tool life
  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • MULTIPURPOSE & LIFETIME GUARANTEE: Suitable for bench drill, hand drill and conventional electric drill. Perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber etc. Set includes the drill bit holder for easy storage and organizing. We only care about your satisfaction. We stand behind all of our high quality products so we offer a No Question Asked on our Drill Bit Set. Please contact us (through Amazon if past the standard return window) and we will be pleased to assist you
  • FULL SET OF STANDARD SIZE: With the drill bits we offered, you can process 7 different diameter holes, ( Round shank| 1/8'', 3/16'', 1/4'', 5/16'', 3/8'' Reduced Shank| 7/16'', 1/2'' ), which meet your different needs perfectly.
  • Brad-Point Design -The Brad-Point Design can penetrate surface quickly because of the sharp point on the tip. This allows the user to pinpoint the mark with the drill bit. Better in CENTERING and NO SKID.
  • HIGH QUALITY MATERIAL: Classic Carbon Steel Material for fast cutting against tough wood material. High hardness, offer superior cutting power and durable.
  • EXTRA LONG LENGTH & 2 TYPE SHANK: Extra long 300mm body provides better stability and balance during quick operation to ensure position is intact. Flute length is 180mm with ROUND shank and REDUCED shank.
  • Fish eye hole provided near tip of flutes to aid in pulling wire inside wall cavity from either direction after drilling, with no damage to the wall
  • Drills holes down the length of wall cavity
  • Self feeding screw point
  • Fish eye holes at both ends
  • Flexible shaft
  • For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1 2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • Suitable for many electric drills and drills
  • provides better stability and balance during quick operation to ensure position is intact
  • Quantity:This set includes 8 pieces drill bit in different sizes of the most popular drill bits.1 pc/per size.
  • Application:drill bits kit are great for most drilling jobs and materials such as aluminum, wood, plastics PVC and other different materials or your daily drill use.
  • Diameter: 2mm 2.5mm 3mm 4mm 4.5mm 5mm 6mm 7mm.Length:about 200mm(about 7.8 inch)
  • Includes: Metal Box
  • For standard duty, general purpose deep drilling operations
  • Used with hand held manual drills and portable or stationary machines
  • Size Range: 1/16" to 1/4" by 64ths
  • M2 Material High Speed Steel (HSS)

More Info

Drill America 5 Piece High-Speed Steel Extra-Long Drill Bit Set (1/4 - 1/2" x 12" Long), POU Series

More from Tools & Home Improvement
Search only Drill America brand name
Drill America 5 Piece High-Speed Steel Extra-Long Drill Bit Set (1/4 - 1/2

Current price: 64.14 USD


Check price and availability


  • Includes a full set of standard sizes to meet every job’s need: 1/8-inch, 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and many more
  • High hardness and sharp pointed tips punctures tough material with ease for a smooth drilling finish
  • Extra-long 12-inch body provides more stability when balance during quick operation to ensure position is in tact
  • High speed steel construction is designed for durability and extends tool life
  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • MULTIPURPOSE & LIFETIME GUARANTEE: Suitable for bench drill, hand drill and conventional electric drill. Perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber etc. Set includes the drill bit holder for easy storage and organizing. We only care about your satisfaction. We stand behind all of our high quality products so we offer a No Question Asked on our Drill Bit Set. Please contact us (through Amazon if past the standard return window) and we will be pleased to assist you
  • FULL SET OF STANDARD SIZE: With the drill bits we offered, you can process 7 different diameter holes, ( Round shank| 1/8'', 3/16'', 1/4'', 5/16'', 3/8'' Reduced Shank| 7/16'', 1/2'' ), which meet your different needs perfectly.
  • Brad-Point Design -The Brad-Point Design can penetrate surface quickly because of the sharp point on the tip. This allows the user to pinpoint the mark with the drill bit. Better in CENTERING and NO SKID.
  • HIGH QUALITY MATERIAL: Classic Carbon Steel Material for fast cutting against tough wood material. High hardness, offer superior cutting power and durable.
  • EXTRA LONG LENGTH & 2 TYPE SHANK: Extra long 300mm body provides better stability and balance during quick operation to ensure position is intact. Flute length is 180mm with ROUND shank and REDUCED shank.
  • Fish eye hole provided near tip of flutes to aid in pulling wire inside wall cavity from either direction after drilling, with no damage to the wall
  • Drills holes down the length of wall cavity
  • Self feeding screw point
  • Fish eye holes at both ends
  • Flexible shaft
  • For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1 2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • Suitable for many electric drills and drills
  • provides better stability and balance during quick operation to ensure position is intact
  • Quantity:This set includes 8 pieces drill bit in different sizes of the most popular drill bits.1 pc/per size.
  • Application:drill bits kit are great for most drilling jobs and materials such as aluminum, wood, plastics PVC and other different materials or your daily drill use.
  • Diameter: 2mm 2.5mm 3mm 4mm 4.5mm 5mm 6mm 7mm.Length:about 200mm(about 7.8 inch)
  • Includes: Metal Box
  • For standard duty, general purpose deep drilling operations
  • Used with hand held manual drills and portable or stationary machines
  • Size Range: 1/16" to 1/4" by 64ths
  • M2 Material High Speed Steel (HSS)
  • Round shanks allow use with a wide variety of tool holding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Sizes included are 1/4", 5/16", 3/8", 7/16" and 1/2" with overall length of 12"

More Info

SOMADA 1/2-Inch x 12-Inch Auger Drill Bit for Wood, Hex Shank 3/8-Inch, Ship Auger Long Drill Bit for Soft and Hard Wood, Plastic, Drywall and Composite Materials

More from Tools & Home Improvement
Search only SOMADA brand name
SOMADA 1/2-Inch x 12-Inch Auger Drill Bit for Wood, Hex Shank 3/8-Inch, Ship Auger Long Drill Bit for Soft and Hard Wood, Plastic, Drywall and Composite Materials

Current price: 12.99 USD


Check price and availability


Height: 0.5 Inches

Length: 11.8 Inches

Width: 0.5 Inches

  • Includes a full set of standard sizes to meet every job’s need: 1/8-inch, 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and many more
  • High hardness and sharp pointed tips punctures tough material with ease for a smooth drilling finish
  • Extra-long 12-inch body provides more stability when balance during quick operation to ensure position is in tact
  • High speed steel construction is designed for durability and extends tool life
  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • MULTIPURPOSE & LIFETIME GUARANTEE: Suitable for bench drill, hand drill and conventional electric drill. Perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber etc. Set includes the drill bit holder for easy storage and organizing. We only care about your satisfaction. We stand behind all of our high quality products so we offer a No Question Asked on our Drill Bit Set. Please contact us (through Amazon if past the standard return window) and we will be pleased to assist you
  • FULL SET OF STANDARD SIZE: With the drill bits we offered, you can process 7 different diameter holes, ( Round shank| 1/8'', 3/16'', 1/4'', 5/16'', 3/8'' Reduced Shank| 7/16'', 1/2'' ), which meet your different needs perfectly.
  • Brad-Point Design -The Brad-Point Design can penetrate surface quickly because of the sharp point on the tip. This allows the user to pinpoint the mark with the drill bit. Better in CENTERING and NO SKID.
  • HIGH QUALITY MATERIAL: Classic Carbon Steel Material for fast cutting against tough wood material. High hardness, offer superior cutting power and durable.
  • EXTRA LONG LENGTH & 2 TYPE SHANK: Extra long 300mm body provides better stability and balance during quick operation to ensure position is intact. Flute length is 180mm with ROUND shank and REDUCED shank.
  • Fish eye hole provided near tip of flutes to aid in pulling wire inside wall cavity from either direction after drilling, with no damage to the wall
  • Drills holes down the length of wall cavity
  • Self feeding screw point
  • Fish eye holes at both ends
  • Flexible shaft
  • For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1 2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • Suitable for many electric drills and drills
  • provides better stability and balance during quick operation to ensure position is intact
  • Quantity:This set includes 8 pieces drill bit in different sizes of the most popular drill bits.1 pc/per size.
  • Application:drill bits kit are great for most drilling jobs and materials such as aluminum, wood, plastics PVC and other different materials or your daily drill use.
  • Diameter: 2mm 2.5mm 3mm 4mm 4.5mm 5mm 6mm 7mm.Length:about 200mm(about 7.8 inch)
  • Includes: Metal Box
  • For standard duty, general purpose deep drilling operations
  • Used with hand held manual drills and portable or stationary machines
  • Size Range: 1/16" to 1/4" by 64ths
  • M2 Material High Speed Steel (HSS)
  • Round shanks allow use with a wide variety of tool holding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Sizes included are 1/4", 5/16", 3/8", 7/16" and 1/2" with overall length of 12"
  • The cutting flute is milled with hollow centers for faster chip clearance
  • Self Feeding Coarse screw point desgined for faster drilling. Single-spur cutting edge scribes the circumference of the hole for a smoother finish. A perfect 12 inch drill bit for so many DIY projects.
  • Perfect for drilling into soft and hardwood, MDF, Plywood, Lumber, Railroad Ties, Landscape Timber, Invisible Floating Shelf Bracket Installation, tree stump boring, for up to 10” deep hole. Easy to bore into tree stump, lumber, landscape timber and railroad ties.
  • Made of Carbon Steel. Solid Center Design for extra rigidity while boring.
  • 1/2" Diameter X 12" Long Auger Drill Bit with a 3/8" Hex Shank

More Info

1    2    3    4    5    6    7    8    9    10