Best Extra Long Drill Bits. Fulton brand. New releases 2021

12" Long Brad Point Bit Set (7 Drill Bit Set). Perfect for Drilling Wood, Plastic, Drywall and Composite Materials

More from Tools & Home Improvement
Search only Fulton brand name
12

Current price: 20.49 USD

Saving: $4.50 (18%)


Check price and availability


  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.

More Info

Fulton 10 inch Long Forstner Bit Extension for Adding Over 8" of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)

More from Tools & Home Improvement
Search only Fulton brand name
Fulton 10 inch Long Forstner Bit Extension for Adding Over 8

Current price: 16.99 USD

Saving: $3.00 (15%)


Check price and availability


  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.

More Info

Fulton 10 inch Long Forstner Bit Extension for Adding Over 8" of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (1/2 inch Collet)

More from Tools & Home Improvement
Search only Fulton brand name
Fulton 10 inch Long Forstner Bit Extension for Adding Over 8

Current price: 17.99 USD


Check price and availability


  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • The collet outside diameter is 29/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 15/16 inch. Forstner bits and Machinery shown are NOT included. PLEASE NOTE: Your drill must have a 1/2” chuck in order to accommodate this 1/2” diameter shank.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 1/2 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 1/2 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 1/2 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 1/2 inch shank forstner bit into the end collet.

More Info

EZ Align Premium Shelf Pin Drilling Jig With 1/4" And 5mm Self Centering Drill Bits, Dual Sided Shelf Pin Jig for Easy Alignment On Both Sides Of The Shelf

More from Tools & Home Improvement
Search only Peachtree Woodworking Supply brand name
EZ Align Premium Shelf Pin Drilling Jig With 1/4

Current price: 69.99 USD


Check price and availability


Weight: 0.75 Pounds

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • The collet outside diameter is 29/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 15/16 inch. Forstner bits and Machinery shown are NOT included. PLEASE NOTE: Your drill must have a 1/2” chuck in order to accommodate this 1/2” diameter shank.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 1/2 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 1/2 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 1/2 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 1/2 inch shank forstner bit into the end collet.
  • Included with the EZ Align Shelf Pin Jig system are two redesigned self centering drill bits. They offer better performance and more accurate results. The easy to clear and easy to clean bits make drilling your shelf pins quick and easy.
  • The jig works with both assembled and non-assembled cabinets. It can be used together as designed for non-assembled cabinets or the acrylic sliding jigs can be taken off the rails and used to drill assembled cabinets. This makes the EZ align jig very versatile and can help complete your shelf pin drilling chores quickly and accurately.
  • The jig also features a 50mm index from opposite side of the jig for larger or wider shelves. Sometimes we need to make deeper or wider shelves and the 50mm offset makes this possible by shifting the pin holes back further so the shelf sits better than the outward holes
  • Two dual purpose star indexing pins are included to make aligning of your holes a breeze. Each pin can index either 1/4" pin holes or 5mm pin holes (both the 1/4" & 5mm self centering drill bits are included). The index pins allow you to drill holes in runs that are longer than the jig and help keep the jig from moving so you don’t need clamps.
  • The EZ-Align Shelf Pin Jig is a dual drilling jig that allows you to drill two rows of shelf pin holes that are perfectly aligned every single time! This eliminates that chance for rocking the frustrating wobbling shelves. The EZ-Align jig also provides perfect vertical spacing of 1-1/4" (32mm) between pin holes.

More Info

Drill Press Table 15" x 24" x 1-3/8" Thick with Aluminum L Fence, 2 Each 3/8" Hold Downs and 2 Zero Clearance Table Inserts. Secures to Most Any Style or Size Drill Press

More from Tools & Home Improvement
Search only Fulton brand name
Drill Press Table 15

Current price: 89.99 USD


Check price and availability


  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • The collet outside diameter is 29/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 15/16 inch. Forstner bits and Machinery shown are NOT included. PLEASE NOTE: Your drill must have a 1/2” chuck in order to accommodate this 1/2” diameter shank.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 1/2 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 1/2 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 1/2 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 1/2 inch shank forstner bit into the end collet.
  • Included with the EZ Align Shelf Pin Jig system are two redesigned self centering drill bits. They offer better performance and more accurate results. The easy to clear and easy to clean bits make drilling your shelf pins quick and easy.
  • The jig works with both assembled and non-assembled cabinets. It can be used together as designed for non-assembled cabinets or the acrylic sliding jigs can be taken off the rails and used to drill assembled cabinets. This makes the EZ align jig very versatile and can help complete your shelf pin drilling chores quickly and accurately.
  • The jig also features a 50mm index from opposite side of the jig for larger or wider shelves. Sometimes we need to make deeper or wider shelves and the 50mm offset makes this possible by shifting the pin holes back further so the shelf sits better than the outward holes
  • Two dual purpose star indexing pins are included to make aligning of your holes a breeze. Each pin can index either 1/4" pin holes or 5mm pin holes (both the 1/4" & 5mm self centering drill bits are included). The index pins allow you to drill holes in runs that are longer than the jig and help keep the jig from moving so you don’t need clamps.
  • The EZ-Align Shelf Pin Jig is a dual drilling jig that allows you to drill two rows of shelf pin holes that are perfectly aligned every single time! This eliminates that chance for rocking the frustrating wobbling shelves. The EZ-Align jig also provides perfect vertical spacing of 1-1/4" (32mm) between pin holes.
  • That feature alone separates the Fulton Drill Press Table from the other "feature laden" and very expensive table tops. Another unique feature is that the table has been designed to fit on most any drill press table with a unique track mounting system underneath the table. You can mount the table top with the included post knobs if you have a slotted factory table top on your drill press or you can use the included aluminum hold down clamps to mount to any other style of table top.
  • Below the zero clearance insert is an opening that measures approximately 5-5/16” x 5-5/16” at the top with a circle cut out of the center that is about 3-3/4” in diameter. The circular cut-out is approximately 1” deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3” in diameter.
  • Below the zero clearance insert is an opening that measures approximately 5-5/16” x 5-5/16” at the top with a circle cut out of the center that is about 3-3/4” in diameter. The circular cut-out is approximately 1” deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3” in diameter. That feature alone separates the Fulton Drill Press Table from the others
  • The Drill Press Table measures approximately 15" x 24" x 1-3/8" thick and is laminated on both top and bottom to prevent warping and to keep the table top flat. The top of the table is laminated with a smooth material that allows for easy positioning of your stock and is very easy to clean with household cleaners. The table also has a zero clearance is included that can be used for specific size bits. Two tracks run front to back for jigs and fixtures and they accept any 3/8" hex head bolt.
  • Drill press machines are great for woodworking, metal working, plastic or composite drilling and more when you need to drill a straight hole or many holes in quick succession. The trouble with most drill press machines is that the table top that comes with them are not very practical. In steps the Fulton Drill Press Table, which is one of the thickest, most dense, vibration absorbing tables available today.

More Info

Fulton Aluminum Precision Adjustable Drill Press Fence with Tilt Capability For Easily Squaring To The Drill Bit

More from Tools & Home Improvement
Search only Fulton brand name
Fulton Aluminum Precision Adjustable Drill Press Fence with Tilt Capability For Easily Squaring To The Drill Bit

Current price: 69.99 USD


Check price and availability


  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • The collet outside diameter is 29/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 15/16 inch. Forstner bits and Machinery shown are NOT included. PLEASE NOTE: Your drill must have a 1/2” chuck in order to accommodate this 1/2” diameter shank.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 1/2 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 1/2 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 1/2 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 1/2 inch shank forstner bit into the end collet.
  • Included with the EZ Align Shelf Pin Jig system are two redesigned self centering drill bits. They offer better performance and more accurate results. The easy to clear and easy to clean bits make drilling your shelf pins quick and easy.
  • The jig works with both assembled and non-assembled cabinets. It can be used together as designed for non-assembled cabinets or the acrylic sliding jigs can be taken off the rails and used to drill assembled cabinets. This makes the EZ align jig very versatile and can help complete your shelf pin drilling chores quickly and accurately.
  • The jig also features a 50mm index from opposite side of the jig for larger or wider shelves. Sometimes we need to make deeper or wider shelves and the 50mm offset makes this possible by shifting the pin holes back further so the shelf sits better than the outward holes
  • Two dual purpose star indexing pins are included to make aligning of your holes a breeze. Each pin can index either 1/4" pin holes or 5mm pin holes (both the 1/4" & 5mm self centering drill bits are included). The index pins allow you to drill holes in runs that are longer than the jig and help keep the jig from moving so you don’t need clamps.
  • The EZ-Align Shelf Pin Jig is a dual drilling jig that allows you to drill two rows of shelf pin holes that are perfectly aligned every single time! This eliminates that chance for rocking the frustrating wobbling shelves. The EZ-Align jig also provides perfect vertical spacing of 1-1/4" (32mm) between pin holes.
  • That feature alone separates the Fulton Drill Press Table from the other "feature laden" and very expensive table tops. Another unique feature is that the table has been designed to fit on most any drill press table with a unique track mounting system underneath the table. You can mount the table top with the included post knobs if you have a slotted factory table top on your drill press or you can use the included aluminum hold down clamps to mount to any other style of table top.
  • Below the zero clearance insert is an opening that measures approximately 5-5/16” x 5-5/16” at the top with a circle cut out of the center that is about 3-3/4” in diameter. The circular cut-out is approximately 1” deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3” in diameter.
  • Below the zero clearance insert is an opening that measures approximately 5-5/16” x 5-5/16” at the top with a circle cut out of the center that is about 3-3/4” in diameter. The circular cut-out is approximately 1” deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3” in diameter. That feature alone separates the Fulton Drill Press Table from the others
  • The Drill Press Table measures approximately 15" x 24" x 1-3/8" thick and is laminated on both top and bottom to prevent warping and to keep the table top flat. The top of the table is laminated with a smooth material that allows for easy positioning of your stock and is very easy to clean with household cleaners. The table also has a zero clearance is included that can be used for specific size bits. Two tracks run front to back for jigs and fixtures and they accept any 3/8" hex head bolt.
  • Drill press machines are great for woodworking, metal working, plastic or composite drilling and more when you need to drill a straight hole or many holes in quick succession. The trouble with most drill press machines is that the table top that comes with them are not very practical. In steps the Fulton Drill Press Table, which is one of the thickest, most dense, vibration absorbing tables available today.
  • The fence can be used on multiple brands and styles of after market drill press tables. Be sure to measure your drill press tables dimensions before purchasing. The distance between each fence slot (inside to inside of each slot) is approximately 8-13/16” and approximately 9 3/8” on center. Make sure your mounting tracks properly align with these dimensions and that your tracks use ¼” x 20 t-bolts or hex head bolts. Each slot is approximately 5/16” wide and 1-7/16” long.
  • The Aluminum Precision Adjustable Drill Press Fence is made from a solid piece of extruded aluminum for extra rigidity and durability. The fence has slotted holes on the back side to fit on to many different after market drill press table tops. The top side of the fence has a built-in track for adding any jig or fixture that uses ¼” t-bolts or ¼” hex head bolts.
  • The fence is secured to your table top using two sets of ¼” x 20 knob and t-bolts. The knobs can be loosened for quick adjustments to the positioning of the fence. Once in place, simply tighten the knobs to secure the fence into the needed position. The fence measures approximately 24” in length and is about 2¼” tall. It has a slightly recessed slot across the face of the fence for the PSA center finding tape measure to sit flush.
  • The fence system also includes a flip stop for repetitive drilling. The flip stop can be completely removed from the fence or it can be positioned up and out of the way when not in use. The stop works in conjunction with the center finder tape on the fence. The reason for the center finder tape is so you can accurately measure distance starting from the drill bit and work your way out from center. This method of measuring on the drill press comes in very handy on many drill press applications.
  • This is a uniquely designed uni-body, L-style aluminum fence that is completely adjustable to achieve squareness to your table top and drill bit. It not only makes drilling straight holes easier, it makes drilling taller, longer stock much more accurate. To adjust the fence, you simply rotate the pre-installed set screws inside the fence or the ones on the back side of the fence until you are square. We recommend using a machinist square to accurately do this (square not included).

More Info

Fulton Foam Router Bit Storage Tray for Festool Systainer 1 Accepts 103 Total Bits (75 each ¼” Shank & 28 each ½” Shank Bits)

More from Tools & Home Improvement
Search only Fulton brand name
Fulton Foam Router Bit Storage Tray for Festool Systainer 1 Accepts 103 Total Bits (75 each ¼” Shank & 28 each ½” Shank Bits)

Current price: 17.72 USD


Check price and availability


  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • The collet outside diameter is 29/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 15/16 inch. Forstner bits and Machinery shown are NOT included. PLEASE NOTE: Your drill must have a 1/2” chuck in order to accommodate this 1/2” diameter shank.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 1/2 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 1/2 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 1/2 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 1/2 inch shank forstner bit into the end collet.
  • Included with the EZ Align Shelf Pin Jig system are two redesigned self centering drill bits. They offer better performance and more accurate results. The easy to clear and easy to clean bits make drilling your shelf pins quick and easy.
  • The jig works with both assembled and non-assembled cabinets. It can be used together as designed for non-assembled cabinets or the acrylic sliding jigs can be taken off the rails and used to drill assembled cabinets. This makes the EZ align jig very versatile and can help complete your shelf pin drilling chores quickly and accurately.
  • The jig also features a 50mm index from opposite side of the jig for larger or wider shelves. Sometimes we need to make deeper or wider shelves and the 50mm offset makes this possible by shifting the pin holes back further so the shelf sits better than the outward holes
  • Two dual purpose star indexing pins are included to make aligning of your holes a breeze. Each pin can index either 1/4" pin holes or 5mm pin holes (both the 1/4" & 5mm self centering drill bits are included). The index pins allow you to drill holes in runs that are longer than the jig and help keep the jig from moving so you don’t need clamps.
  • The EZ-Align Shelf Pin Jig is a dual drilling jig that allows you to drill two rows of shelf pin holes that are perfectly aligned every single time! This eliminates that chance for rocking the frustrating wobbling shelves. The EZ-Align jig also provides perfect vertical spacing of 1-1/4" (32mm) between pin holes.
  • That feature alone separates the Fulton Drill Press Table from the other "feature laden" and very expensive table tops. Another unique feature is that the table has been designed to fit on most any drill press table with a unique track mounting system underneath the table. You can mount the table top with the included post knobs if you have a slotted factory table top on your drill press or you can use the included aluminum hold down clamps to mount to any other style of table top.
  • Below the zero clearance insert is an opening that measures approximately 5-5/16” x 5-5/16” at the top with a circle cut out of the center that is about 3-3/4” in diameter. The circular cut-out is approximately 1” deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3” in diameter.
  • Below the zero clearance insert is an opening that measures approximately 5-5/16” x 5-5/16” at the top with a circle cut out of the center that is about 3-3/4” in diameter. The circular cut-out is approximately 1” deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3” in diameter. That feature alone separates the Fulton Drill Press Table from the others
  • The Drill Press Table measures approximately 15" x 24" x 1-3/8" thick and is laminated on both top and bottom to prevent warping and to keep the table top flat. The top of the table is laminated with a smooth material that allows for easy positioning of your stock and is very easy to clean with household cleaners. The table also has a zero clearance is included that can be used for specific size bits. Two tracks run front to back for jigs and fixtures and they accept any 3/8" hex head bolt.
  • Drill press machines are great for woodworking, metal working, plastic or composite drilling and more when you need to drill a straight hole or many holes in quick succession. The trouble with most drill press machines is that the table top that comes with them are not very practical. In steps the Fulton Drill Press Table, which is one of the thickest, most dense, vibration absorbing tables available today.
  • The fence can be used on multiple brands and styles of after market drill press tables. Be sure to measure your drill press tables dimensions before purchasing. The distance between each fence slot (inside to inside of each slot) is approximately 8-13/16” and approximately 9 3/8” on center. Make sure your mounting tracks properly align with these dimensions and that your tracks use ¼” x 20 t-bolts or hex head bolts. Each slot is approximately 5/16” wide and 1-7/16” long.
  • The Aluminum Precision Adjustable Drill Press Fence is made from a solid piece of extruded aluminum for extra rigidity and durability. The fence has slotted holes on the back side to fit on to many different after market drill press table tops. The top side of the fence has a built-in track for adding any jig or fixture that uses ¼” t-bolts or ¼” hex head bolts.
  • The fence is secured to your table top using two sets of ¼” x 20 knob and t-bolts. The knobs can be loosened for quick adjustments to the positioning of the fence. Once in place, simply tighten the knobs to secure the fence into the needed position. The fence measures approximately 24” in length and is about 2¼” tall. It has a slightly recessed slot across the face of the fence for the PSA center finding tape measure to sit flush.
  • The fence system also includes a flip stop for repetitive drilling. The flip stop can be completely removed from the fence or it can be positioned up and out of the way when not in use. The stop works in conjunction with the center finder tape on the fence. The reason for the center finder tape is so you can accurately measure distance starting from the drill bit and work your way out from center. This method of measuring on the drill press comes in very handy on many drill press applications.
  • This is a uniquely designed uni-body, L-style aluminum fence that is completely adjustable to achieve squareness to your table top and drill bit. It not only makes drilling straight holes easier, it makes drilling taller, longer stock much more accurate. To adjust the fence, you simply rotate the pre-installed set screws inside the fence or the ones on the back side of the fence until you are square. We recommend using a machinist square to accurately do this (square not included).
  • The 1-1/2” thick, lightweight, impact resistant, high density foam material on the Fulton Foam Router Bit Storage Tray keeps your router bits firmly and safely in place and protected. You are sure to get years of organization and protection for your bits using the Fulton Foam Router Bit Storage Tray for the Festool Systainer SYS-1 TL 497563
  • You can insert up to 75 each ¼” shank router bits and 28 each ½” router bits. This gives you a total of 103 router bits of storage space! It’s unique, but lightweight construction makes it convenient to transport your bits from one location to another, all the while delivering an organized approach to arranging your bits for easy access.
  • The tray was cut into the shape of the inside of the Festool Systainer SYS1 for a convenient fit. You’ll not only have your router bits protected by the high density foam material, you will also have the piece of mind knowing your bits are encased within the durable Festool Systainer.
  • We made this foam router bit tray with the high density foam to provide you with a long term router bit storage solution.The firm, high density foam material won’t wear like some wood or plastic router bit holders tend to do over time. It will firmly grip your ¼” and ½” shank bits for years to come.
  • The Fulton Foam Router Bit Storage Tray is the perfect addition to your Festool Systainer SYS1 and router bit organization. Designed to fit neatly into the Festool Systainer, this foam router bit tray will hold a large assortment of router bits, all the while protecting your bits from damage.

More Info

Fulton FW20000101 F2 Trailer Winch with Strap - 2000 lb. Load Capacity

More from Tools & Home Improvement
Search only Fulton brand name
Fulton FW20000101 F2 Trailer Winch with Strap - 2000 lb. Load Capacity

Current price: 147.22 USD

Saving: $23.20 (14%)


Check price and availability


Height: 12 Inches

Length: 8 Inches

Width: 9 Inches

Weight: 10 Pounds

Warranty: Lifetime

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • The collet outside diameter is 29/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 15/16 inch. Forstner bits and Machinery shown are NOT included. PLEASE NOTE: Your drill must have a 1/2” chuck in order to accommodate this 1/2” diameter shank.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 1/2 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 1/2 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 1/2 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 1/2 inch shank forstner bit into the end collet.
  • Included with the EZ Align Shelf Pin Jig system are two redesigned self centering drill bits. They offer better performance and more accurate results. The easy to clear and easy to clean bits make drilling your shelf pins quick and easy.
  • The jig works with both assembled and non-assembled cabinets. It can be used together as designed for non-assembled cabinets or the acrylic sliding jigs can be taken off the rails and used to drill assembled cabinets. This makes the EZ align jig very versatile and can help complete your shelf pin drilling chores quickly and accurately.
  • The jig also features a 50mm index from opposite side of the jig for larger or wider shelves. Sometimes we need to make deeper or wider shelves and the 50mm offset makes this possible by shifting the pin holes back further so the shelf sits better than the outward holes
  • Two dual purpose star indexing pins are included to make aligning of your holes a breeze. Each pin can index either 1/4" pin holes or 5mm pin holes (both the 1/4" & 5mm self centering drill bits are included). The index pins allow you to drill holes in runs that are longer than the jig and help keep the jig from moving so you don’t need clamps.
  • The EZ-Align Shelf Pin Jig is a dual drilling jig that allows you to drill two rows of shelf pin holes that are perfectly aligned every single time! This eliminates that chance for rocking the frustrating wobbling shelves. The EZ-Align jig also provides perfect vertical spacing of 1-1/4" (32mm) between pin holes.
  • That feature alone separates the Fulton Drill Press Table from the other "feature laden" and very expensive table tops. Another unique feature is that the table has been designed to fit on most any drill press table with a unique track mounting system underneath the table. You can mount the table top with the included post knobs if you have a slotted factory table top on your drill press or you can use the included aluminum hold down clamps to mount to any other style of table top.
  • Below the zero clearance insert is an opening that measures approximately 5-5/16” x 5-5/16” at the top with a circle cut out of the center that is about 3-3/4” in diameter. The circular cut-out is approximately 1” deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3” in diameter.
  • Below the zero clearance insert is an opening that measures approximately 5-5/16” x 5-5/16” at the top with a circle cut out of the center that is about 3-3/4” in diameter. The circular cut-out is approximately 1” deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3” in diameter. That feature alone separates the Fulton Drill Press Table from the others
  • The Drill Press Table measures approximately 15" x 24" x 1-3/8" thick and is laminated on both top and bottom to prevent warping and to keep the table top flat. The top of the table is laminated with a smooth material that allows for easy positioning of your stock and is very easy to clean with household cleaners. The table also has a zero clearance is included that can be used for specific size bits. Two tracks run front to back for jigs and fixtures and they accept any 3/8" hex head bolt.
  • Drill press machines are great for woodworking, metal working, plastic or composite drilling and more when you need to drill a straight hole or many holes in quick succession. The trouble with most drill press machines is that the table top that comes with them are not very practical. In steps the Fulton Drill Press Table, which is one of the thickest, most dense, vibration absorbing tables available today.
  • The fence can be used on multiple brands and styles of after market drill press tables. Be sure to measure your drill press tables dimensions before purchasing. The distance between each fence slot (inside to inside of each slot) is approximately 8-13/16” and approximately 9 3/8” on center. Make sure your mounting tracks properly align with these dimensions and that your tracks use ¼” x 20 t-bolts or hex head bolts. Each slot is approximately 5/16” wide and 1-7/16” long.
  • The Aluminum Precision Adjustable Drill Press Fence is made from a solid piece of extruded aluminum for extra rigidity and durability. The fence has slotted holes on the back side to fit on to many different after market drill press table tops. The top side of the fence has a built-in track for adding any jig or fixture that uses ¼” t-bolts or ¼” hex head bolts.
  • The fence is secured to your table top using two sets of ¼” x 20 knob and t-bolts. The knobs can be loosened for quick adjustments to the positioning of the fence. Once in place, simply tighten the knobs to secure the fence into the needed position. The fence measures approximately 24” in length and is about 2¼” tall. It has a slightly recessed slot across the face of the fence for the PSA center finding tape measure to sit flush.
  • The fence system also includes a flip stop for repetitive drilling. The flip stop can be completely removed from the fence or it can be positioned up and out of the way when not in use. The stop works in conjunction with the center finder tape on the fence. The reason for the center finder tape is so you can accurately measure distance starting from the drill bit and work your way out from center. This method of measuring on the drill press comes in very handy on many drill press applications.
  • This is a uniquely designed uni-body, L-style aluminum fence that is completely adjustable to achieve squareness to your table top and drill bit. It not only makes drilling straight holes easier, it makes drilling taller, longer stock much more accurate. To adjust the fence, you simply rotate the pre-installed set screws inside the fence or the ones on the back side of the fence until you are square. We recommend using a machinist square to accurately do this (square not included).
  • The 1-1/2” thick, lightweight, impact resistant, high density foam material on the Fulton Foam Router Bit Storage Tray keeps your router bits firmly and safely in place and protected. You are sure to get years of organization and protection for your bits using the Fulton Foam Router Bit Storage Tray for the Festool Systainer SYS-1 TL 497563
  • You can insert up to 75 each ¼” shank router bits and 28 each ½” router bits. This gives you a total of 103 router bits of storage space! It’s unique, but lightweight construction makes it convenient to transport your bits from one location to another, all the while delivering an organized approach to arranging your bits for easy access.
  • The tray was cut into the shape of the inside of the Festool Systainer SYS1 for a convenient fit. You’ll not only have your router bits protected by the high density foam material, you will also have the piece of mind knowing your bits are encased within the durable Festool Systainer.
  • We made this foam router bit tray with the high density foam to provide you with a long term router bit storage solution.The firm, high density foam material won’t wear like some wood or plastic router bit holders tend to do over time. It will firmly grip your ¼” and ½” shank bits for years to come.
  • The Fulton Foam Router Bit Storage Tray is the perfect addition to your Festool Systainer SYS1 and router bit organization. Designed to fit neatly into the Festool Systainer, this foam router bit tray will hold a large assortment of router bits, all the while protecting your bits from damage.
  • Standard mounting bolt pattern, mounting hardware included (footprint 8”Hx6.5”Wx9.5”D). 2000 lb. capacity. Includes 20’ strap with hook
  • Maintenance free – designed to eliminate the need for lubrication or maintenance
  • Adjustable-length soft grip handle, switches from left- to right-hand drive configuration
  • Center drive enclosed ratchet system with a user-friendly pull-turn knob to engage ratchet plunger pin
  • Corrosion-resistant one-piece aluminum frame and one-piece aluminum handle resists damage from moisture and salt.
  • Includes 15 foot winch strap with hook and all mounting hardware
  • 2,000 pounds capacity
  • Left or right handed handle attachment and 2-position handle adjusts from 6 inch to 9 inch
  • Center drive enclosed ratchet system with a user-friendly pull-turn knob to engage ratchet plunger pin
  • Corrosion resistant aluminum frame and handle

More Info

Fulton XP15L 0101 Swivel Trailer Tongue Jack with 8" Wheel - 1500 Lbs. Capacity

More from Tools & Home Improvement
Search only Fulton brand name
Fulton XP15L 0101 Swivel Trailer Tongue Jack with 8

Current price: 148.05 USD


Check price and availability


Weight: 20.3 Pounds

Warranty: 5 Year

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • The collet outside diameter is 29/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 15/16 inch. Forstner bits and Machinery shown are NOT included. PLEASE NOTE: Your drill must have a 1/2” chuck in order to accommodate this 1/2” diameter shank.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 1/2 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 1/2 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 1/2 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 1/2 inch shank forstner bit into the end collet.
  • Included with the EZ Align Shelf Pin Jig system are two redesigned self centering drill bits. They offer better performance and more accurate results. The easy to clear and easy to clean bits make drilling your shelf pins quick and easy.
  • The jig works with both assembled and non-assembled cabinets. It can be used together as designed for non-assembled cabinets or the acrylic sliding jigs can be taken off the rails and used to drill assembled cabinets. This makes the EZ align jig very versatile and can help complete your shelf pin drilling chores quickly and accurately.
  • The jig also features a 50mm index from opposite side of the jig for larger or wider shelves. Sometimes we need to make deeper or wider shelves and the 50mm offset makes this possible by shifting the pin holes back further so the shelf sits better than the outward holes
  • Two dual purpose star indexing pins are included to make aligning of your holes a breeze. Each pin can index either 1/4" pin holes or 5mm pin holes (both the 1/4" & 5mm self centering drill bits are included). The index pins allow you to drill holes in runs that are longer than the jig and help keep the jig from moving so you don’t need clamps.
  • The EZ-Align Shelf Pin Jig is a dual drilling jig that allows you to drill two rows of shelf pin holes that are perfectly aligned every single time! This eliminates that chance for rocking the frustrating wobbling shelves. The EZ-Align jig also provides perfect vertical spacing of 1-1/4" (32mm) between pin holes.
  • That feature alone separates the Fulton Drill Press Table from the other "feature laden" and very expensive table tops. Another unique feature is that the table has been designed to fit on most any drill press table with a unique track mounting system underneath the table. You can mount the table top with the included post knobs if you have a slotted factory table top on your drill press or you can use the included aluminum hold down clamps to mount to any other style of table top.
  • Below the zero clearance insert is an opening that measures approximately 5-5/16” x 5-5/16” at the top with a circle cut out of the center that is about 3-3/4” in diameter. The circular cut-out is approximately 1” deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3” in diameter.
  • Below the zero clearance insert is an opening that measures approximately 5-5/16” x 5-5/16” at the top with a circle cut out of the center that is about 3-3/4” in diameter. The circular cut-out is approximately 1” deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3” in diameter. That feature alone separates the Fulton Drill Press Table from the others
  • The Drill Press Table measures approximately 15" x 24" x 1-3/8" thick and is laminated on both top and bottom to prevent warping and to keep the table top flat. The top of the table is laminated with a smooth material that allows for easy positioning of your stock and is very easy to clean with household cleaners. The table also has a zero clearance is included that can be used for specific size bits. Two tracks run front to back for jigs and fixtures and they accept any 3/8" hex head bolt.
  • Drill press machines are great for woodworking, metal working, plastic or composite drilling and more when you need to drill a straight hole or many holes in quick succession. The trouble with most drill press machines is that the table top that comes with them are not very practical. In steps the Fulton Drill Press Table, which is one of the thickest, most dense, vibration absorbing tables available today.
  • The fence can be used on multiple brands and styles of after market drill press tables. Be sure to measure your drill press tables dimensions before purchasing. The distance between each fence slot (inside to inside of each slot) is approximately 8-13/16” and approximately 9 3/8” on center. Make sure your mounting tracks properly align with these dimensions and that your tracks use ¼” x 20 t-bolts or hex head bolts. Each slot is approximately 5/16” wide and 1-7/16” long.
  • The Aluminum Precision Adjustable Drill Press Fence is made from a solid piece of extruded aluminum for extra rigidity and durability. The fence has slotted holes on the back side to fit on to many different after market drill press table tops. The top side of the fence has a built-in track for adding any jig or fixture that uses ¼” t-bolts or ¼” hex head bolts.
  • The fence is secured to your table top using two sets of ¼” x 20 knob and t-bolts. The knobs can be loosened for quick adjustments to the positioning of the fence. Once in place, simply tighten the knobs to secure the fence into the needed position. The fence measures approximately 24” in length and is about 2¼” tall. It has a slightly recessed slot across the face of the fence for the PSA center finding tape measure to sit flush.
  • The fence system also includes a flip stop for repetitive drilling. The flip stop can be completely removed from the fence or it can be positioned up and out of the way when not in use. The stop works in conjunction with the center finder tape on the fence. The reason for the center finder tape is so you can accurately measure distance starting from the drill bit and work your way out from center. This method of measuring on the drill press comes in very handy on many drill press applications.
  • This is a uniquely designed uni-body, L-style aluminum fence that is completely adjustable to achieve squareness to your table top and drill bit. It not only makes drilling straight holes easier, it makes drilling taller, longer stock much more accurate. To adjust the fence, you simply rotate the pre-installed set screws inside the fence or the ones on the back side of the fence until you are square. We recommend using a machinist square to accurately do this (square not included).
  • The 1-1/2” thick, lightweight, impact resistant, high density foam material on the Fulton Foam Router Bit Storage Tray keeps your router bits firmly and safely in place and protected. You are sure to get years of organization and protection for your bits using the Fulton Foam Router Bit Storage Tray for the Festool Systainer SYS-1 TL 497563
  • You can insert up to 75 each ¼” shank router bits and 28 each ½” router bits. This gives you a total of 103 router bits of storage space! It’s unique, but lightweight construction makes it convenient to transport your bits from one location to another, all the while delivering an organized approach to arranging your bits for easy access.
  • The tray was cut into the shape of the inside of the Festool Systainer SYS1 for a convenient fit. You’ll not only have your router bits protected by the high density foam material, you will also have the piece of mind knowing your bits are encased within the durable Festool Systainer.
  • We made this foam router bit tray with the high density foam to provide you with a long term router bit storage solution.The firm, high density foam material won’t wear like some wood or plastic router bit holders tend to do over time. It will firmly grip your ¼” and ½” shank bits for years to come.
  • The Fulton Foam Router Bit Storage Tray is the perfect addition to your Festool Systainer SYS1 and router bit organization. Designed to fit neatly into the Festool Systainer, this foam router bit tray will hold a large assortment of router bits, all the while protecting your bits from damage.
  • Standard mounting bolt pattern, mounting hardware included (footprint 8”Hx6.5”Wx9.5”D). 2000 lb. capacity. Includes 20’ strap with hook
  • Maintenance free – designed to eliminate the need for lubrication or maintenance
  • Adjustable-length soft grip handle, switches from left- to right-hand drive configuration
  • Center drive enclosed ratchet system with a user-friendly pull-turn knob to engage ratchet plunger pin
  • Corrosion-resistant one-piece aluminum frame and one-piece aluminum handle resists damage from moisture and salt.
  • Includes 15 foot winch strap with hook and all mounting hardware
  • 2,000 pounds capacity
  • Left or right handed handle attachment and 2-position handle adjusts from 6 inch to 9 inch
  • Center drive enclosed ratchet system with a user-friendly pull-turn knob to engage ratchet plunger pin
  • Corrosion resistant aluminum frame and handle
  • Z-MAX 600 superior plating corrosion protection
  • Hardware included to mount up to a 3" x 5" trailer frame. Pull Pin Diameter-0.5 inch
  • Sturdy 8" spoked wheel, 1/2" swivel pull pin ; Handle Style: Sidewind
  • Bolt-Thru mount with minimal deflection and maximum support
  • Bolt-On Swivel Tongue Jack, 1500 lbs. capacity, with an additional 2" of travel

More Info

Fulton 142415 Dual Speed Winch with 20' Strap - 2600 lbs. Capacity, 1 Pack

More from Tools & Home Improvement
Search only Fulton brand name
Fulton 142415 Dual Speed Winch with 20' Strap - 2600 lbs. Capacity, 1 Pack

Current price: 116.3 USD


Check price and availability


Warranty: 5 Year

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • The collet outside diameter is 29/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 15/16 inch. Forstner bits and Machinery shown are NOT included. PLEASE NOTE: Your drill must have a 1/2” chuck in order to accommodate this 1/2” diameter shank.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 1/2 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 1/2 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 1/2 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 1/2 inch shank forstner bit into the end collet.
  • Included with the EZ Align Shelf Pin Jig system are two redesigned self centering drill bits. They offer better performance and more accurate results. The easy to clear and easy to clean bits make drilling your shelf pins quick and easy.
  • The jig works with both assembled and non-assembled cabinets. It can be used together as designed for non-assembled cabinets or the acrylic sliding jigs can be taken off the rails and used to drill assembled cabinets. This makes the EZ align jig very versatile and can help complete your shelf pin drilling chores quickly and accurately.
  • The jig also features a 50mm index from opposite side of the jig for larger or wider shelves. Sometimes we need to make deeper or wider shelves and the 50mm offset makes this possible by shifting the pin holes back further so the shelf sits better than the outward holes
  • Two dual purpose star indexing pins are included to make aligning of your holes a breeze. Each pin can index either 1/4" pin holes or 5mm pin holes (both the 1/4" & 5mm self centering drill bits are included). The index pins allow you to drill holes in runs that are longer than the jig and help keep the jig from moving so you don’t need clamps.
  • The EZ-Align Shelf Pin Jig is a dual drilling jig that allows you to drill two rows of shelf pin holes that are perfectly aligned every single time! This eliminates that chance for rocking the frustrating wobbling shelves. The EZ-Align jig also provides perfect vertical spacing of 1-1/4" (32mm) between pin holes.
  • That feature alone separates the Fulton Drill Press Table from the other "feature laden" and very expensive table tops. Another unique feature is that the table has been designed to fit on most any drill press table with a unique track mounting system underneath the table. You can mount the table top with the included post knobs if you have a slotted factory table top on your drill press or you can use the included aluminum hold down clamps to mount to any other style of table top.
  • Below the zero clearance insert is an opening that measures approximately 5-5/16” x 5-5/16” at the top with a circle cut out of the center that is about 3-3/4” in diameter. The circular cut-out is approximately 1” deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3” in diameter.
  • Below the zero clearance insert is an opening that measures approximately 5-5/16” x 5-5/16” at the top with a circle cut out of the center that is about 3-3/4” in diameter. The circular cut-out is approximately 1” deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3” in diameter. That feature alone separates the Fulton Drill Press Table from the others
  • The Drill Press Table measures approximately 15" x 24" x 1-3/8" thick and is laminated on both top and bottom to prevent warping and to keep the table top flat. The top of the table is laminated with a smooth material that allows for easy positioning of your stock and is very easy to clean with household cleaners. The table also has a zero clearance is included that can be used for specific size bits. Two tracks run front to back for jigs and fixtures and they accept any 3/8" hex head bolt.
  • Drill press machines are great for woodworking, metal working, plastic or composite drilling and more when you need to drill a straight hole or many holes in quick succession. The trouble with most drill press machines is that the table top that comes with them are not very practical. In steps the Fulton Drill Press Table, which is one of the thickest, most dense, vibration absorbing tables available today.
  • The fence can be used on multiple brands and styles of after market drill press tables. Be sure to measure your drill press tables dimensions before purchasing. The distance between each fence slot (inside to inside of each slot) is approximately 8-13/16” and approximately 9 3/8” on center. Make sure your mounting tracks properly align with these dimensions and that your tracks use ¼” x 20 t-bolts or hex head bolts. Each slot is approximately 5/16” wide and 1-7/16” long.
  • The Aluminum Precision Adjustable Drill Press Fence is made from a solid piece of extruded aluminum for extra rigidity and durability. The fence has slotted holes on the back side to fit on to many different after market drill press table tops. The top side of the fence has a built-in track for adding any jig or fixture that uses ¼” t-bolts or ¼” hex head bolts.
  • The fence is secured to your table top using two sets of ¼” x 20 knob and t-bolts. The knobs can be loosened for quick adjustments to the positioning of the fence. Once in place, simply tighten the knobs to secure the fence into the needed position. The fence measures approximately 24” in length and is about 2¼” tall. It has a slightly recessed slot across the face of the fence for the PSA center finding tape measure to sit flush.
  • The fence system also includes a flip stop for repetitive drilling. The flip stop can be completely removed from the fence or it can be positioned up and out of the way when not in use. The stop works in conjunction with the center finder tape on the fence. The reason for the center finder tape is so you can accurately measure distance starting from the drill bit and work your way out from center. This method of measuring on the drill press comes in very handy on many drill press applications.
  • This is a uniquely designed uni-body, L-style aluminum fence that is completely adjustable to achieve squareness to your table top and drill bit. It not only makes drilling straight holes easier, it makes drilling taller, longer stock much more accurate. To adjust the fence, you simply rotate the pre-installed set screws inside the fence or the ones on the back side of the fence until you are square. We recommend using a machinist square to accurately do this (square not included).
  • The 1-1/2” thick, lightweight, impact resistant, high density foam material on the Fulton Foam Router Bit Storage Tray keeps your router bits firmly and safely in place and protected. You are sure to get years of organization and protection for your bits using the Fulton Foam Router Bit Storage Tray for the Festool Systainer SYS-1 TL 497563
  • You can insert up to 75 each ¼” shank router bits and 28 each ½” router bits. This gives you a total of 103 router bits of storage space! It’s unique, but lightweight construction makes it convenient to transport your bits from one location to another, all the while delivering an organized approach to arranging your bits for easy access.
  • The tray was cut into the shape of the inside of the Festool Systainer SYS1 for a convenient fit. You’ll not only have your router bits protected by the high density foam material, you will also have the piece of mind knowing your bits are encased within the durable Festool Systainer.
  • We made this foam router bit tray with the high density foam to provide you with a long term router bit storage solution.The firm, high density foam material won’t wear like some wood or plastic router bit holders tend to do over time. It will firmly grip your ¼” and ½” shank bits for years to come.
  • The Fulton Foam Router Bit Storage Tray is the perfect addition to your Festool Systainer SYS1 and router bit organization. Designed to fit neatly into the Festool Systainer, this foam router bit tray will hold a large assortment of router bits, all the while protecting your bits from damage.
  • Standard mounting bolt pattern, mounting hardware included (footprint 8”Hx6.5”Wx9.5”D). 2000 lb. capacity. Includes 20’ strap with hook
  • Maintenance free – designed to eliminate the need for lubrication or maintenance
  • Adjustable-length soft grip handle, switches from left- to right-hand drive configuration
  • Center drive enclosed ratchet system with a user-friendly pull-turn knob to engage ratchet plunger pin
  • Corrosion-resistant one-piece aluminum frame and one-piece aluminum handle resists damage from moisture and salt.
  • Includes 15 foot winch strap with hook and all mounting hardware
  • 2,000 pounds capacity
  • Left or right handed handle attachment and 2-position handle adjusts from 6 inch to 9 inch
  • Center drive enclosed ratchet system with a user-friendly pull-turn knob to engage ratchet plunger pin
  • Corrosion resistant aluminum frame and handle
  • Z-MAX 600 superior plating corrosion protection
  • Hardware included to mount up to a 3" x 5" trailer frame. Pull Pin Diameter-0.5 inch
  • Sturdy 8" spoked wheel, 1/2" swivel pull pin ; Handle Style: Sidewind
  • Bolt-Thru mount with minimal deflection and maximum support
  • Bolt-On Swivel Tongue Jack, 1500 lbs. capacity, with an additional 2" of travel
  • Fit type: Vehicle Specific
  • 2, 600 lb. Capacity two-speed winch one fast speed for quick pull-in, a second low speed for increased mechanical advantage 10 inch 'comfort grip' handle
  • Includes 20 foot strap with metal slip hook and safety latch
  • High-carbon Steel gears for superb strength and long-term durability stamped carbon Steel frame provides rigidity, important for gear alignment, and longer cycle life
  • Neutral free-wheel position allows quick Line pay out without spinning the handle optional handbrake kit no. 501201 (sold separately) can be installed after the winch is mounted
  • Shift lock design allows changing gears without moving the crank handle from shaft to shaft, just Lift the shift lock and slide the shaft into the desired gear position

More Info

1    2