High rated Expansion Shield Anchors. Reviews July, 2021, page 1

CONFAST 1/4" Lag Shield Anchor Short 1" Long (100 per Box)

More from Tools & Home Improvement
Search only CONFAST brand name
CONFAST 1/4

Current price: 26.09 USD


Check price and availability


  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free

More Info

Wej-It MS14 Expansion Shield Anchor, Zamac Alloy, Meets A-A 1922A Type 1 and FFS-325C Group 1 Type 1 Class 1, 7/8" Length, 1/4"-20 Threads (Pack Of 100)

More from Tools & Home Improvement
Search only Wej-It brand name
Wej-It MS14 Expansion Shield Anchor, Zamac Alloy, Meets A-A 1922A Type 1 and FFS-325C Group 1 Type 1 Class 1, 7/8

Current price: 39.99 USD


Check price and availability


Height: 4 Inches

Length: 5 Inches

Width: 4 Inches

Weight: 3.6 Pounds

  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free
  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete

More Info

Prime-Line 9071684 Lag Shields, Long, 1/2 in. X 3 in., Zinc Alloy, 10-Pack

More from Tools & Home Improvement
Search only PRIME-LINE brand name
Prime-Line 9071684 Lag Shields, Long, 1/2 in. X 3 in., Zinc Alloy, 10-Pack

Current price: 18.6 USD


Check price and availability


Height: 4 Inches

Length: 4 Inches

Width: 4 Inches

  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free
  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 1/2 inch X 3 inch

More Info

Zinc Plated Double Expansion Shield Anchors 1/4" x 1-5/16" Qty 25

More from Tools & Home Improvement
Search only RAW PRODUCTS CORP brand name
Zinc Plated Double Expansion Shield Anchors 1/4

Current price: 24.75 USD


Check price and availability


Weight: 0.74 Pounds

  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free
  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 1/2 inch X 3 inch
  • Screws and bolts can be removed or replaced after installation.
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration.
  • The anchor sits flush with the base material and is designed to accept a screw or bolt.
  • The band or shield is designed to expand during installation.
  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together.

More Info

Wej-It DES12 Expansion Shield Anchor, Zamac Alloy, Meets GSA FFS-325 Group II Type 2 Class 2 Style 2, 7/8" Diameter, 2" Length, 1/2"-13 Threads (Pack Of 25)

More from Tools & Home Improvement
Search only Wej-It brand name
Wej-It DES12 Expansion Shield Anchor, Zamac Alloy, Meets GSA FFS-325 Group II Type 2 Class 2 Style 2, 7/8

Current price: 35.99 USD


Check price and availability


Length: 2 Inches

  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free
  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 1/2 inch X 3 inch
  • Screws and bolts can be removed or replaced after installation.
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration.
  • The anchor sits flush with the base material and is designed to accept a screw or bolt.
  • The band or shield is designed to expand during installation.
  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • Ultimate tensile strength is 4,600 lb. in 2,000-psi concrete
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place
  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration

More Info

CONFAST 5/16" (Inside/Screw 5/16" Diameter) Single Expansion Anchor (50 per Box)

More from Tools & Home Improvement
Search only CONFAST brand name
CONFAST 5/16

Current price: 27.99 USD


Check price and availability


  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free
  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 1/2 inch X 3 inch
  • Screws and bolts can be removed or replaced after installation.
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration.
  • The anchor sits flush with the base material and is designed to accept a screw or bolt.
  • The band or shield is designed to expand during installation.
  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • Ultimate tensile strength is 4,600 lb. in 2,000-psi concrete
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place
  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
  • BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
  • INTERNAL THREADS-Bolt can be removed easily
  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
  • PRE-ASSEMBLED-Ready to install; no setting tools required

More Info

Hard-to-Find Fastener 014973238100 Double Expansion Shields, 3/8, Piece-50

More from Tools & Home Improvement
Search only Hard-to-Find Fastener brand name
Hard-to-Find Fastener 014973238100 Double Expansion Shields, 3/8, Piece-50

Current price: 73.5 USD


Check price and availability


Height: 3.5 Inches

Length: 7.25 Inches

Width: 4.25 Inches

  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free
  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 1/2 inch X 3 inch
  • Screws and bolts can be removed or replaced after installation.
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration.
  • The anchor sits flush with the base material and is designed to accept a screw or bolt.
  • The band or shield is designed to expand during installation.
  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • Ultimate tensile strength is 4,600 lb. in 2,000-psi concrete
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place
  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
  • BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
  • INTERNAL THREADS-Bolt can be removed easily
  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
  • PRE-ASSEMBLED-Ready to install; no setting tools required
  • Style: Double
  • Drill Size: 3/4 inches
  • Finish: Zinc
  • Material: Steel
  • Diameter: 3/8"
  • Style: double
  • Drill size: 3/4 inches
  • Finish: Zinc
  • Material: Steel
  • Diameter: 3/8 inch

More Info

Prime-Line 9071458 Lag Shields, Short, 3/8 in. X 1-3/4 in., Zinc Alloy, 50-Pack

More from Tools & Home Improvement
Search only PRIME-LINE brand name
Prime-Line 9071458 Lag Shields, Short, 3/8 in. X 1-3/4 in., Zinc Alloy, 50-Pack

Current price: 55.51 USD


Check price and availability


Height: 2 Inches

Length: 4 Inches

Width: 4 Inches

Weight: 2.263 Pounds

  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free
  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 1/2 inch X 3 inch
  • Screws and bolts can be removed or replaced after installation.
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration.
  • The anchor sits flush with the base material and is designed to accept a screw or bolt.
  • The band or shield is designed to expand during installation.
  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • Ultimate tensile strength is 4,600 lb. in 2,000-psi concrete
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place
  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
  • BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
  • INTERNAL THREADS-Bolt can be removed easily
  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
  • PRE-ASSEMBLED-Ready to install; no setting tools required
  • Style: Double
  • Drill Size: 3/4 inches
  • Finish: Zinc
  • Material: Steel
  • Diameter: 3/8"
  • Style: double
  • Drill size: 3/4 inches
  • Finish: Zinc
  • Material: Steel
  • Diameter: 3/8 inch
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 3/8 inch X 1-3/4 inch

More Info

Hard-to-Find Fastener 014973269470 Lag Expansion Shields, 1/4 Short, Piece-12

More from Tools & Home Improvement
Search only Hard-to-Find Fastener brand name
Hard-to-Find Fastener 014973269470 Lag Expansion Shields, 1/4 Short, Piece-12

Current price: 11.73 USD


Check price and availability


Height: 1.44 Inches

Length: 2.5 Inches

Width: 2.5 Inches

  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free
  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 1/2 inch X 3 inch
  • Screws and bolts can be removed or replaced after installation.
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration.
  • The anchor sits flush with the base material and is designed to accept a screw or bolt.
  • The band or shield is designed to expand during installation.
  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • Ultimate tensile strength is 4,600 lb. in 2,000-psi concrete
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place
  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
  • BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
  • INTERNAL THREADS-Bolt can be removed easily
  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
  • PRE-ASSEMBLED-Ready to install; no setting tools required
  • Style: Double
  • Drill Size: 3/4 inches
  • Finish: Zinc
  • Material: Steel
  • Diameter: 3/8"
  • Style: double
  • Drill size: 3/4 inches
  • Finish: Zinc
  • Material: Steel
  • Diameter: 3/8 inch
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 3/8 inch X 1-3/4 inch
  • Drill Size: 1/2 inch
  • Finish: Zinc
  • Material: Steel
  • Length: Short
  • Diameter: 1/4"

More Info

1/4" Double Expansion Shields (Box of 50)

More from Tools & Home Improvement
Search only brand name
1/4

Current price: 26.53 USD


Check price and availability


  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free
  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 1/2 inch X 3 inch
  • Screws and bolts can be removed or replaced after installation.
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration.
  • The anchor sits flush with the base material and is designed to accept a screw or bolt.
  • The band or shield is designed to expand during installation.
  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • Ultimate tensile strength is 4,600 lb. in 2,000-psi concrete
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place
  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
  • BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
  • INTERNAL THREADS-Bolt can be removed easily
  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
  • PRE-ASSEMBLED-Ready to install; no setting tools required
  • Style: Double
  • Drill Size: 3/4 inches
  • Finish: Zinc
  • Material: Steel
  • Diameter: 3/8"
  • Style: double
  • Drill size: 3/4 inches
  • Finish: Zinc
  • Material: Steel
  • Diameter: 3/8 inch
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 3/8 inch X 1-3/4 inch
  • Drill Size: 1/2 inch
  • Finish: Zinc
  • Material: Steel
  • Length: Short
  • Diameter: 1/4"

More Info

1    2    3    4    5    6    7    8    9    10