Best Expansion Shield Anchors. brand. New releases 2021

Wej-It MS14 Expansion Shield Anchor, Zamac Alloy, Meets A-A 1922A Type 1 and FFS-325C Group 1 Type 1 Class 1, 7/8" Length, 1/4"-20 Threads (Pack Of 100)

More from Tools & Home Improvement
Search only Wej-It brand name
Wej-It MS14 Expansion Shield Anchor, Zamac Alloy, Meets A-A 1922A Type 1 and FFS-325C Group 1 Type 1 Class 1, 7/8

Current price: 39.99 USD


Check price and availability


Height: 4 Inches

Length: 5 Inches

Width: 4 Inches

Weight: 3.6 Pounds

  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete

More Info

CONFAST 1/4" Lag Shield Anchor Short 1" Long (100 per Box)

More from Tools & Home Improvement
Search only CONFAST brand name
CONFAST 1/4

Current price: 26.09 USD


Check price and availability


  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free

More Info

Wej-It DES12 Expansion Shield Anchor, Zamac Alloy, Meets GSA FFS-325 Group II Type 2 Class 2 Style 2, 7/8" Diameter, 2" Length, 1/2"-13 Threads (Pack Of 25)

More from Tools & Home Improvement
Search only Wej-It brand name
Wej-It DES12 Expansion Shield Anchor, Zamac Alloy, Meets GSA FFS-325 Group II Type 2 Class 2 Style 2, 7/8

Current price: 35.99 USD


Check price and availability


Length: 2 Inches

  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • Ultimate tensile strength is 4,600 lb. in 2,000-psi concrete
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place
  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration

More Info

Zinc Plated Double Expansion Shield Anchors 1/4" x 1-5/16" Qty 25

More from Tools & Home Improvement
Search only RAW PRODUCTS CORP brand name
Zinc Plated Double Expansion Shield Anchors 1/4

Current price: 25.99 USD


Check price and availability


Weight: 0.74 Pounds

  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • Ultimate tensile strength is 4,600 lb. in 2,000-psi concrete
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place
  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration
  • Screws and bolts can be removed or replaced after installation.
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration.
  • The anchor sits flush with the base material and is designed to accept a screw or bolt.
  • The band or shield is designed to expand during installation.
  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together.

More Info

Prime-Line 9071684 Lag Shields, Long, 1/2 in. X 3 in., Zinc Alloy, 10-Pack

More from Tools & Home Improvement
Search only PRIME-LINE brand name
Prime-Line 9071684 Lag Shields, Long, 1/2 in. X 3 in., Zinc Alloy, 10-Pack

Current price: 18.36 USD


Check price and availability


Height: 4 Inches

Length: 4 Inches

Width: 4 Inches

  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • Ultimate tensile strength is 4,600 lb. in 2,000-psi concrete
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place
  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration
  • Screws and bolts can be removed or replaced after installation.
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration.
  • The anchor sits flush with the base material and is designed to accept a screw or bolt.
  • The band or shield is designed to expand during installation.
  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together.
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 1/2 inch X 3 inch

More Info

CONFAST 5/16" (Inside/Screw 5/16" Diameter) Single Expansion Anchor (50 per Box)

More from Tools & Home Improvement
Search only CONFAST brand name
CONFAST 5/16

Current price: 27.99 USD


Check price and availability


  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • Ultimate tensile strength is 4,600 lb. in 2,000-psi concrete
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place
  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration
  • Screws and bolts can be removed or replaced after installation.
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration.
  • The anchor sits flush with the base material and is designed to accept a screw or bolt.
  • The band or shield is designed to expand during installation.
  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together.
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 1/2 inch X 3 inch
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
  • BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
  • INTERNAL THREADS-Bolt can be removed easily
  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
  • PRE-ASSEMBLED-Ready to install; no setting tools required

More Info

Hard-to-Find Fastener 014973238100 Double Expansion Shields, 3/8, Piece-50

More from Tools & Home Improvement
Search only Hard-to-Find Fastener brand name
Hard-to-Find Fastener 014973238100 Double Expansion Shields, 3/8, Piece-50

Current price: 74.74 USD


Check price and availability


Height: 3.5 Inches

Length: 7.25 Inches

Width: 4.25 Inches

  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • Ultimate tensile strength is 4,600 lb. in 2,000-psi concrete
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place
  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration
  • Screws and bolts can be removed or replaced after installation.
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration.
  • The anchor sits flush with the base material and is designed to accept a screw or bolt.
  • The band or shield is designed to expand during installation.
  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together.
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 1/2 inch X 3 inch
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
  • BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
  • INTERNAL THREADS-Bolt can be removed easily
  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
  • PRE-ASSEMBLED-Ready to install; no setting tools required
  • Style: Double
  • Drill Size: 3/4 inches
  • Finish: Zinc
  • Material: Steel
  • Diameter: 3/8"
  • Style: double
  • Drill size: 3/4 inches
  • Finish: Zinc
  • Material: Steel
  • Diameter: 3/8 inch

More Info

Prime-Line 9071458 Lag Shields, Short, 3/8 in. X 1-3/4 in., Zinc Alloy, 50-Pack

More from Tools & Home Improvement
Search only PRIME-LINE brand name
Prime-Line 9071458 Lag Shields, Short, 3/8 in. X 1-3/4 in., Zinc Alloy, 50-Pack

Current price: 55.51 USD


Check price and availability


Height: 2 Inches

Length: 4 Inches

Width: 4 Inches

Weight: 2.263 Pounds

  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • Ultimate tensile strength is 4,600 lb. in 2,000-psi concrete
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place
  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration
  • Screws and bolts can be removed or replaced after installation.
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration.
  • The anchor sits flush with the base material and is designed to accept a screw or bolt.
  • The band or shield is designed to expand during installation.
  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together.
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 1/2 inch X 3 inch
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
  • BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
  • INTERNAL THREADS-Bolt can be removed easily
  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
  • PRE-ASSEMBLED-Ready to install; no setting tools required
  • Style: Double
  • Drill Size: 3/4 inches
  • Finish: Zinc
  • Material: Steel
  • Diameter: 3/8"
  • Style: double
  • Drill size: 3/4 inches
  • Finish: Zinc
  • Material: Steel
  • Diameter: 3/8 inch
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 3/8 inch X 1-3/4 inch

More Info

Hard-to-Find Fastener 014973269470 Lag Expansion Shields, 1/4 Short, Piece-12

More from Tools & Home Improvement
Search only Hard-to-Find Fastener brand name
Hard-to-Find Fastener 014973269470 Lag Expansion Shields, 1/4 Short, Piece-12

Current price: 11.7 USD


Check price and availability


Height: 1.44 Inches

Length: 2.5 Inches

Width: 2.5 Inches

  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • Ultimate tensile strength is 4,600 lb. in 2,000-psi concrete
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place
  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration
  • Screws and bolts can be removed or replaced after installation.
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration.
  • The anchor sits flush with the base material and is designed to accept a screw or bolt.
  • The band or shield is designed to expand during installation.
  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together.
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 1/2 inch X 3 inch
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
  • BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
  • INTERNAL THREADS-Bolt can be removed easily
  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
  • PRE-ASSEMBLED-Ready to install; no setting tools required
  • Style: Double
  • Drill Size: 3/4 inches
  • Finish: Zinc
  • Material: Steel
  • Diameter: 3/8"
  • Style: double
  • Drill size: 3/4 inches
  • Finish: Zinc
  • Material: Steel
  • Diameter: 3/8 inch
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 3/8 inch X 1-3/4 inch
  • Drill Size: 1/2 inch
  • Finish: Zinc
  • Material: Steel
  • Length: Short
  • Diameter: 1/4"

More Info

CONFAST 1/2" (Inside/Screw 1/2" Diameter) Double Expansion Anchor (20 per Box)

More from Tools & Home Improvement
Search only CONFAST brand name
CONFAST 1/2

Current price: 38.99 USD


Check price and availability


  • Rust resistant material enables extended use
  • Holding power extends to uneven holes and soft material
  • Meets Fed. Spec. A-A 1922A Type 1 and FFS-325C Group 1, Type 1, Class 1
  • Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place
  • Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications
  • BOLT EXPANDS ANCHOR-No setting tool required; fast and easy
  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant
  • Orders over $25.00 ship for free
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
  • Ultimate tensile strength is 4,600 lb. in 2,000-psi concrete
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place
  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration
  • Screws and bolts can be removed or replaced after installation.
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration.
  • The anchor sits flush with the base material and is designed to accept a screw or bolt.
  • The band or shield is designed to expand during installation.
  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together.
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 1/2 inch X 3 inch
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications
  • BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
  • INTERNAL THREADS-Bolt can be removed easily
  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
  • PRE-ASSEMBLED-Ready to install; no setting tools required
  • Style: Double
  • Drill Size: 3/4 inches
  • Finish: Zinc
  • Material: Steel
  • Diameter: 3/8"
  • Style: double
  • Drill size: 3/4 inches
  • Finish: Zinc
  • Material: Steel
  • Diameter: 3/8 inch
  • Drill hole with masonry drill bit based on diameter on anchor
  • Lag screw expands the lag shield against the walls of the hole
  • Inserts into a hole by tapping with a hammer until flush
  • Allows for lag screw bolts to be installed into concrete, brick & block
  • Size: 3/8 inch X 1-3/4 inch
  • Drill Size: 1/2 inch
  • Finish: Zinc
  • Material: Steel
  • Length: Short
  • Diameter: 1/4"
  • EVERY DIAMETER AVAILABLE IN ONE LENGTH - Selection simply requires choosing a diameter and then selecting the anchor
  • ACCEPTS BOLTS WITH COARSE THREADS - Common type of fastener which is easy to find
  • INTERNAL THREADS - Easy of removability
  • EXPANDS THE WHOLE LENGTH OF ANCHOR - Excellent performance in base material of questionable strength
  • CORROSION RESISTANT BODY - Anchor body can be used in atmospheres where moisture may be present

More Info

1    2    3    4    5    6    7    8    9    10