High rated End Mills. Reviews September, 2021, page 1

AUTOTOOLHOME 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32" 1/16" Set of 8

Search only AUTOTOOLHOME brand name
AUTOTOOLHOME 1/8

Current price: 13.99 USD


Check price and availability


Weight: 0.42 Pounds

  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
  • Color : Gray;Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16"
  • Product Name : End Mill;Material : HSS

More Info

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE3/8"4T - Made in Taiwan (1 Piece, 3/8")

Search only SPEED TIGER brand name
SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE3/8

Current price: 16 USD


Check price and availability


  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
  • Color : Gray;Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16"
  • Product Name : End Mill;Material : HSS
  • BUY BULK AND SAVE - Search Amazon for B07QHSDFLB for a 5 pc bulk pack or contact Amazon seller for more info
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron

More Info

1/2" Carbide Square End Mill, HRC 45 Deg Single End 4 Flute AlTiN Coating Mill Bits

Search only Home of quality tools brand name
1/2

Current price: 27.5 USD


Check price and availability


Height: 2.95 Inches

Length: 2.95 Inches

Width: 0.5 Inches

Weight: 111.4 Grams

  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
  • Color : Gray;Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16"
  • Product Name : End Mill;Material : HSS
  • BUY BULK AND SAVE - Search Amazon for B07QHSDFLB for a 5 pc bulk pack or contact Amazon seller for more info
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron
  • Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining.
  • HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron.
  • Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.
  • Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.
  • Package Included: 1pc 1/2 " carbide square end Mill.

More Info

Accusize Industrial Tools 20 Pc Hss Tin Coated End Mill Set, 2 Flute and 4 Flute, Cutting Diameter from 3/16'' up to 3/4'', 1810-0100

Search only Hardware & Outdoor brand name
Accusize Industrial Tools 20 Pc Hss Tin Coated End Mill Set, 2 Flute and 4 Flute, Cutting Diameter from 3/16'' up to 3/4'', 1810-0100

Current price: 116 USD


Check price and availability


Height: 5.905511805 Inches

Length: 11.81102361 Inches

Width: 3.93700787 Inches

  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
  • Color : Gray;Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16"
  • Product Name : End Mill;Material : HSS
  • BUY BULK AND SAVE - Search Amazon for B07QHSDFLB for a 5 pc bulk pack or contact Amazon seller for more info
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron
  • Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining.
  • HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron.
  • Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.
  • Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.
  • Package Included: 1pc 1/2 " carbide square end Mill.
  • With 3/4'' shank: 3/4''
  • With 5/8'' shank: 5/8'',11/16''
  • With 1/2'' shank: 1/2'',9/16''
  • One of each size in both 2 & 4 flute: with 3/8'' shank:3/16'', 1/4'', 5/16'', 3/8'', 7/16''
  • high speed steel, Tin Coating. Straight Shank

More Info

WTP Trades - 1/4 inch .25" Square Nose TiAlN 4 Flute Carbide end Mill - for Cutting Steel, Stainless Steel and Alloy steels - HRC55 - .25" x .25" x .75" x 2.5"

Search only WTP Trades brand name
WTP Trades - 1/4 inch .25

Current price: 18.99 USD


Check price and availability


Height: 0.75 Inches

Length: 2.5 Inches

Width: 0.25 Inches

  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
  • Color : Gray;Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16"
  • Product Name : End Mill;Material : HSS
  • BUY BULK AND SAVE - Search Amazon for B07QHSDFLB for a 5 pc bulk pack or contact Amazon seller for more info
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron
  • Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining.
  • HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron.
  • Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.
  • Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.
  • Package Included: 1pc 1/2 " carbide square end Mill.
  • With 3/4'' shank: 3/4''
  • With 5/8'' shank: 5/8'',11/16''
  • With 1/2'' shank: 1/2'',9/16''
  • One of each size in both 2 & 4 flute: with 3/8'' shank:3/16'', 1/4'', 5/16'', 3/8'', 7/16''
  • high speed steel, Tin Coating. Straight Shank
  • Best for Steel, Steel alloys, stainless steel and other ferrous metals
  • Square nose - Creates a sharp inner corner when milling or a flat bottom when plunge cutting
  • 4 Flute cutter - 4 Flutes increase the number of cutting surfaces for more aggressive machining while also making the tool stronger due to its thicker core structure.
  • TiAlN Coating - Provides superior heat protection by reflecting heat back into metal chips rather than the tool. The TiAlN coating also performs exceptionally well in interrupted cuts making it versatile, cutting down on the verity of tools needed.
  • HRC55 - Superior hardness for extended longevity and a high quality surface finish.

More Info

Genmitsu 40pcs End Mills CNC Router Bits, 1/8" Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

Search only Genmitsu brand name
Genmitsu 40pcs End Mills CNC Router Bits, 1/8

Current price: 33.99 USD

Saving: $6.00 (15%)


Check price and availability


  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
  • Color : Gray;Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16"
  • Product Name : End Mill;Material : HSS
  • BUY BULK AND SAVE - Search Amazon for B07QHSDFLB for a 5 pc bulk pack or contact Amazon seller for more info
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron
  • Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining.
  • HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron.
  • Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.
  • Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.
  • Package Included: 1pc 1/2 " carbide square end Mill.
  • With 3/4'' shank: 3/4''
  • With 5/8'' shank: 5/8'',11/16''
  • With 1/2'' shank: 1/2'',9/16''
  • One of each size in both 2 & 4 flute: with 3/8'' shank:3/16'', 1/4'', 5/16'', 3/8'', 7/16''
  • high speed steel, Tin Coating. Straight Shank
  • Best for Steel, Steel alloys, stainless steel and other ferrous metals
  • Square nose - Creates a sharp inner corner when milling or a flat bottom when plunge cutting
  • 4 Flute cutter - 4 Flutes increase the number of cutting surfaces for more aggressive machining while also making the tool stronger due to its thicker core structure.
  • TiAlN Coating - Provides superior heat protection by reflecting heat back into metal chips rather than the tool. The TiAlN coating also performs exceptionally well in interrupted cuts making it versatile, cutting down on the verity of tools needed.
  • HRC55 - Superior hardness for extended longevity and a high quality surface finish.
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

More Info

SpeTool Carbide 3 Flutes Aluminum End Mill CNC Spiral Router Bit 1/4in Shank with 5/16in Cutter Extra 4 inch Long

Search only SpeTool brand name
SpeTool Carbide 3 Flutes Aluminum End Mill CNC Spiral Router Bit 1/4in Shank with 5/16in Cutter Extra 4 inch Long

Current price: 25.99 USD


Check price and availability


  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
  • Color : Gray;Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16"
  • Product Name : End Mill;Material : HSS
  • BUY BULK AND SAVE - Search Amazon for B07QHSDFLB for a 5 pc bulk pack or contact Amazon seller for more info
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron
  • Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining.
  • HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron.
  • Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.
  • Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.
  • Package Included: 1pc 1/2 " carbide square end Mill.
  • With 3/4'' shank: 3/4''
  • With 5/8'' shank: 5/8'',11/16''
  • With 1/2'' shank: 1/2'',9/16''
  • One of each size in both 2 & 4 flute: with 3/8'' shank:3/16'', 1/4'', 5/16'', 3/8'', 7/16''
  • high speed steel, Tin Coating. Straight Shank
  • Best for Steel, Steel alloys, stainless steel and other ferrous metals
  • Square nose - Creates a sharp inner corner when milling or a flat bottom when plunge cutting
  • 4 Flute cutter - 4 Flutes increase the number of cutting surfaces for more aggressive machining while also making the tool stronger due to its thicker core structure.
  • TiAlN Coating - Provides superior heat protection by reflecting heat back into metal chips rather than the tool. The TiAlN coating also performs exceptionally well in interrupted cuts making it versatile, cutting down on the verity of tools needed.
  • HRC55 - Superior hardness for extended longevity and a high quality surface finish.
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Brand Plunge Router with 1/4" Collet
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp
  • The Router Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining.
  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 5/16 inch Cutting Diameter, 1 inch Cutting Length, 4 inch for Total Length

More Info

Accusize Industrial Tools Standard Tooth M42 8% Cobalt Tialn Roughing End Mill, 3/4'' by 3/4'' by 1-5/8'' Flt Length, 1102-0034

Search only Accusize Industrial Tools brand name
Accusize Industrial Tools Standard Tooth M42 8% Cobalt Tialn Roughing End Mill, 3/4'' by 3/4'' by 1-5/8'' Flt Length, 1102-0034

Current price: 36.8 USD


Check price and availability


Height: 3.93700787 Inches

Length: 1.181102361 Inches

Width: 1.181102361 Inches

Weight: 0.9 Kilograms

  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
  • Color : Gray;Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16"
  • Product Name : End Mill;Material : HSS
  • BUY BULK AND SAVE - Search Amazon for B07QHSDFLB for a 5 pc bulk pack or contact Amazon seller for more info
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron
  • Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining.
  • HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron.
  • Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.
  • Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.
  • Package Included: 1pc 1/2 " carbide square end Mill.
  • With 3/4'' shank: 3/4''
  • With 5/8'' shank: 5/8'',11/16''
  • With 1/2'' shank: 1/2'',9/16''
  • One of each size in both 2 & 4 flute: with 3/8'' shank:3/16'', 1/4'', 5/16'', 3/8'', 7/16''
  • high speed steel, Tin Coating. Straight Shank
  • Best for Steel, Steel alloys, stainless steel and other ferrous metals
  • Square nose - Creates a sharp inner corner when milling or a flat bottom when plunge cutting
  • 4 Flute cutter - 4 Flutes increase the number of cutting surfaces for more aggressive machining while also making the tool stronger due to its thicker core structure.
  • TiAlN Coating - Provides superior heat protection by reflecting heat back into metal chips rather than the tool. The TiAlN coating also performs exceptionally well in interrupted cuts making it versatile, cutting down on the verity of tools needed.
  • HRC55 - Superior hardness for extended longevity and a high quality surface finish.
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Brand Plunge Router with 1/4" Collet
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp
  • The Router Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining.
  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 5/16 inch Cutting Diameter, 1 inch Cutting Length, 4 inch for Total Length
  • Excellent performance in hard materials that are difficult to cut. Extremely hard, wear resistant.
  • Used for aggressive machining. Performance approaching solid carbide with tough H.S.S Tools. Recommended for abrasive materials.
  • Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.
  • Diameter: 3/4''; Shank Diameter: 3/4''; Flute length: 1-5/8''; Overall Length: 3-3/4''; 4 Flute, Coarse Tooth
  • TiAlN Coated, Center cutting, M42-8% Premium cobalt, Flutes ground by a world-class IS-9002 Factory, CNC Qualified

More Info

8Pcs End Mill Bits HSS CNC End Mill Cutter Drill Bits for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set 1/16"-1/2" by Oudtinx

Search only Oudtinx brand name
8Pcs End Mill Bits HSS CNC End Mill Cutter Drill Bits for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set 1/16

Current price: 14.99 USD


Check price and availability


  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
  • Color : Gray;Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16"
  • Product Name : End Mill;Material : HSS
  • BUY BULK AND SAVE - Search Amazon for B07QHSDFLB for a 5 pc bulk pack or contact Amazon seller for more info
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron
  • Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining.
  • HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron.
  • Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.
  • Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.
  • Package Included: 1pc 1/2 " carbide square end Mill.
  • With 3/4'' shank: 3/4''
  • With 5/8'' shank: 5/8'',11/16''
  • With 1/2'' shank: 1/2'',9/16''
  • One of each size in both 2 & 4 flute: with 3/8'' shank:3/16'', 1/4'', 5/16'', 3/8'', 7/16''
  • high speed steel, Tin Coating. Straight Shank
  • Best for Steel, Steel alloys, stainless steel and other ferrous metals
  • Square nose - Creates a sharp inner corner when milling or a flat bottom when plunge cutting
  • 4 Flute cutter - 4 Flutes increase the number of cutting surfaces for more aggressive machining while also making the tool stronger due to its thicker core structure.
  • TiAlN Coating - Provides superior heat protection by reflecting heat back into metal chips rather than the tool. The TiAlN coating also performs exceptionally well in interrupted cuts making it versatile, cutting down on the verity of tools needed.
  • HRC55 - Superior hardness for extended longevity and a high quality surface finish.
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Brand Plunge Router with 1/4" Collet
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp
  • The Router Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining.
  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 5/16 inch Cutting Diameter, 1 inch Cutting Length, 4 inch for Total Length
  • Excellent performance in hard materials that are difficult to cut. Extremely hard, wear resistant.
  • Used for aggressive machining. Performance approaching solid carbide with tough H.S.S Tools. Recommended for abrasive materials.
  • Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.
  • Diameter: 3/4''; Shank Diameter: 3/4''; Flute length: 1-5/8''; Overall Length: 3-3/4''; 4 Flute, Coarse Tooth
  • TiAlN Coated, Center cutting, M42-8% Premium cobalt, Flutes ground by a world-class IS-9002 Factory, CNC Qualified
  • STRONG and DURABLE:The end mill bits are made from Ultra-fine steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
  • One Set of metric end mill bits Including: 8 Different kinds of Size end mills to meet your need, 2mm=1/16", 3mm=1/8", 4mm=5/32'', 5mm=3/16", 6mm=1/4", 8mm=5/16", 10mm=3/8", 12mm=1/2"
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency.

More Info

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 2 Flute - ISE1/8"2T - Made in Taiwan (5 Pieces, 1/8")

Search only SPEED TIGER brand name
SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 2 Flute - ISE1/8

Current price: 22.5 USD


Check price and availability


Weight: 0.13 Pounds

  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
  • Color : Gray;Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16"
  • Product Name : End Mill;Material : HSS
  • BUY BULK AND SAVE - Search Amazon for B07QHSDFLB for a 5 pc bulk pack or contact Amazon seller for more info
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron
  • Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining.
  • HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron.
  • Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.
  • Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.
  • Package Included: 1pc 1/2 " carbide square end Mill.
  • With 3/4'' shank: 3/4''
  • With 5/8'' shank: 5/8'',11/16''
  • With 1/2'' shank: 1/2'',9/16''
  • One of each size in both 2 & 4 flute: with 3/8'' shank:3/16'', 1/4'', 5/16'', 3/8'', 7/16''
  • high speed steel, Tin Coating. Straight Shank
  • Best for Steel, Steel alloys, stainless steel and other ferrous metals
  • Square nose - Creates a sharp inner corner when milling or a flat bottom when plunge cutting
  • 4 Flute cutter - 4 Flutes increase the number of cutting surfaces for more aggressive machining while also making the tool stronger due to its thicker core structure.
  • TiAlN Coating - Provides superior heat protection by reflecting heat back into metal chips rather than the tool. The TiAlN coating also performs exceptionally well in interrupted cuts making it versatile, cutting down on the verity of tools needed.
  • HRC55 - Superior hardness for extended longevity and a high quality surface finish.
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Brand Plunge Router with 1/4" Collet
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp
  • The Router Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining.
  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 5/16 inch Cutting Diameter, 1 inch Cutting Length, 4 inch for Total Length
  • Excellent performance in hard materials that are difficult to cut. Extremely hard, wear resistant.
  • Used for aggressive machining. Performance approaching solid carbide with tough H.S.S Tools. Recommended for abrasive materials.
  • Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.
  • Diameter: 3/4''; Shank Diameter: 3/4''; Flute length: 1-5/8''; Overall Length: 3-3/4''; 4 Flute, Coarse Tooth
  • TiAlN Coated, Center cutting, M42-8% Premium cobalt, Flutes ground by a world-class IS-9002 Factory, CNC Qualified
  • STRONG and DURABLE:The end mill bits are made from Ultra-fine steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
  • One Set of metric end mill bits Including: 8 Different kinds of Size end mills to meet your need, 2mm=1/16", 3mm=1/8", 4mm=5/32'', 5mm=3/16", 6mm=1/4", 8mm=5/16", 10mm=3/8", 12mm=1/2"
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency.
  • DEDICATED SUPPORT - Contact seller via Amazon anytime for cutting condition data to get the best performance from your Speed Tiger cutters
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron

More Info

1    2    3    4    5    6    7    8    9    10