Wonderful End Mills. Reviews July, 2021, page 7

YG-1 - 55573 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter

More from Industrial & Scientific
Search only YG-1 brand name
YG-1 - 55573 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4

Current price: 27.4 USD

Saving: $12.17 (31%)


Check price and availability


Weight: 0.1 Pounds

  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic

More Info

Melin Tool CC Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.3750" Overall Length, 0.5938" Cutting Diameter, 0.5" Shank Diameter

More from Industrial & Scientific
Search only Melin Tool brand name
Melin Tool CC Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.3750

Current price: 29.56 USD


Check price and availability


  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • 30 Degree helix angle
  • Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys

More Info

OSCARBIDE End Mills Set 4 Flutes for Steels,Square CNC Spiral Router Bits Carbide Dia(1 2 3 4 6 8mm) Tian Coated Milling Cutter,6 Pieces

More from Industrial & Scientific
Search only OSCARBIDE brand name
OSCARBIDE End Mills Set 4 Flutes for Steels,Square CNC Spiral Router Bits Carbide Dia(1 2 3 4 6 8mm) Tian Coated Milling Cutter,6 Pieces

Current price: 33.99 USD

Saving: $6.00 (15%)


Check price and availability


Height: 0.0023622 Inches

Length: 0.0023622 Inches

Width: 0.23622 Inches

  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • 30 Degree helix angle
  • Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • ☆Apply to Hardness of metal ,carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc
  • ☆End mill bits are suitable for side milling, end milling, finish machining
  • ☆U-shaped bottomgroove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency
  • ☆6pcs 1mm 2mm 3mm 6mm 8mm diameter 4 Flute End Mill Cutter CNC Bits/set,Easier roughing and finishing processing
  • ☆Material: Tungsten Carbide TiAlN Coated,3 times Durable than Carbide

More Info

Razor Tool 1/2” Dia 4 Flute 90 Degree Carbide Chamfer Cutter 1/4" LOC 3" Long

More from Industrial & Scientific
Search only Razor Tool brand name
Razor Tool 1/2” Dia 4 Flute 90 Degree Carbide Chamfer Cutter 1/4

Current price: 33 USD


Check price and availability


  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • 30 Degree helix angle
  • Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • ☆Apply to Hardness of metal ,carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc
  • ☆End mill bits are suitable for side milling, end milling, finish machining
  • ☆U-shaped bottomgroove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency
  • ☆6pcs 1mm 2mm 3mm 6mm 8mm diameter 4 Flute End Mill Cutter CNC Bits/set,Easier roughing and finishing processing
  • ☆Material: Tungsten Carbide TiAlN Coated,3 times Durable than Carbide
  • Works in all materials
  • Great for Deburring in the machine
  • Made In USA
  • High Surface Quality
  • Premium Micrograin Carbide

More Info

SpeTool Carbide 3 Flutes Aluminum End Mill CNC Spiral Router Bit Pocket Drill with 5/16in Cutter Extra 4 inch Long ZrN Caoted

More from Industrial & Scientific
Search only SpeTool brand name
SpeTool Carbide 3 Flutes Aluminum End Mill CNC Spiral Router Bit Pocket Drill with 5/16in Cutter Extra 4 inch Long ZrN Caoted

Current price: 29.99 USD


Check price and availability


  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • 30 Degree helix angle
  • Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • ☆Apply to Hardness of metal ,carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc
  • ☆End mill bits are suitable for side milling, end milling, finish machining
  • ☆U-shaped bottomgroove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency
  • ☆6pcs 1mm 2mm 3mm 6mm 8mm diameter 4 Flute End Mill Cutter CNC Bits/set,Easier roughing and finishing processing
  • ☆Material: Tungsten Carbide TiAlN Coated,3 times Durable than Carbide
  • Works in all materials
  • Great for Deburring in the machine
  • Made In USA
  • High Surface Quality
  • Premium Micrograin Carbide
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Brand Plunge Router with 1/4" Collet
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp
  • The Router Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining.
  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 5/16 inch Cutting Diameter, 1 inch Cutting Length, 4 inch for Total Length

More Info

SpeTool 2 Flutes 1/4 inch Shank, Extra Long(3 inches) Carbide End Mill TiAlN Coated HRC55 Spiral UpCut CNC Bits

More from Industrial & Scientific
Search only SpeTool brand name
SpeTool 2 Flutes 1/4 inch Shank, Extra Long(3 inches) Carbide End Mill TiAlN Coated HRC55 Spiral UpCut CNC Bits

Current price: 15.99 USD


Check price and availability


  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • 30 Degree helix angle
  • Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • ☆Apply to Hardness of metal ,carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc
  • ☆End mill bits are suitable for side milling, end milling, finish machining
  • ☆U-shaped bottomgroove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency
  • ☆6pcs 1mm 2mm 3mm 6mm 8mm diameter 4 Flute End Mill Cutter CNC Bits/set,Easier roughing and finishing processing
  • ☆Material: Tungsten Carbide TiAlN Coated,3 times Durable than Carbide
  • Works in all materials
  • Great for Deburring in the machine
  • Made In USA
  • High Surface Quality
  • Premium Micrograin Carbide
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Brand Plunge Router with 1/4" Collet
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp
  • The Router Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining.
  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 5/16 inch Cutting Diameter, 1 inch Cutting Length, 4 inch for Total Length
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Flat Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length

More Info

Star Tool Inc Carbide Square End Mill - Submicron Grain Carbide End Mill for Aluminum/Non-Ferrous Materials - 3 Flute - 3/8" - Made in USA - EM-38331125SQ

More from Industrial & Scientific
Search only Star Tool Inc brand name
Star Tool Inc Carbide Square End Mill - Submicron Grain Carbide End Mill for Aluminum/Non-Ferrous Materials - 3 Flute - 3/8

Current price: 26.65 USD


Check price and availability


  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • 30 Degree helix angle
  • Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • ☆Apply to Hardness of metal ,carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc
  • ☆End mill bits are suitable for side milling, end milling, finish machining
  • ☆U-shaped bottomgroove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency
  • ☆6pcs 1mm 2mm 3mm 6mm 8mm diameter 4 Flute End Mill Cutter CNC Bits/set,Easier roughing and finishing processing
  • ☆Material: Tungsten Carbide TiAlN Coated,3 times Durable than Carbide
  • Works in all materials
  • Great for Deburring in the machine
  • Made In USA
  • High Surface Quality
  • Premium Micrograin Carbide
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Brand Plunge Router with 1/4" Collet
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp
  • The Router Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining.
  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 5/16 inch Cutting Diameter, 1 inch Cutting Length, 4 inch for Total Length
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Flat Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • PACKAGING - End Mill is shipped in plastic tube for ultimate protection from damage during the shipping process
  • HIGH QUALITY - Made from submicron grain carbide perfect for ultimate wear resistance and high performance
  • SPECIFICATIONS - 3/8" Diameter x 3 Flutes x 3" OAL x 1.125" LOC x Square Corner
  • APPLICATION - Perfect for all milling applications on aluminum and other non-ferrous materials
  • PROUDLY MADE IN THE USA - Precision CNC ground in the heartland of America

More Info

YG-1 EMB12008 Carbide V7 Mill INOX End Mill, 4 Flute, Regular Length, 1-1/2" Length, 1/8"

More from Industrial & Scientific
Search only YG-1 brand name
YG-1 EMB12008 Carbide V7 Mill INOX End Mill, 4 Flute, Regular Length, 1-1/2

Current price: 11.75 USD


Check price and availability


  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • 30 Degree helix angle
  • Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • ☆Apply to Hardness of metal ,carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc
  • ☆End mill bits are suitable for side milling, end milling, finish machining
  • ☆U-shaped bottomgroove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency
  • ☆6pcs 1mm 2mm 3mm 6mm 8mm diameter 4 Flute End Mill Cutter CNC Bits/set,Easier roughing and finishing processing
  • ☆Material: Tungsten Carbide TiAlN Coated,3 times Durable than Carbide
  • Works in all materials
  • Great for Deburring in the machine
  • Made In USA
  • High Surface Quality
  • Premium Micrograin Carbide
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Brand Plunge Router with 1/4" Collet
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp
  • The Router Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining.
  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 5/16 inch Cutting Diameter, 1 inch Cutting Length, 4 inch for Total Length
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Flat Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • PACKAGING - End Mill is shipped in plastic tube for ultimate protection from damage during the shipping process
  • HIGH QUALITY - Made from submicron grain carbide perfect for ultimate wear resistance and high performance
  • SPECIFICATIONS - 3/8" Diameter x 3 Flutes x 3" OAL x 1.125" LOC x Square Corner
  • APPLICATION - Perfect for all milling applications on aluminum and other non-ferrous materials
  • PROUDLY MADE IN THE USA - Precision CNC ground in the heartland of America
  • Higher speeds, deeper cuts and metal removal rates
  • Excellent work piece finishes
  • Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
  • Special flute geometry eliminates vibrations

More Info

Jarrow Tool Carbide Ball Nose End Mill for CNC Machine Milling Tools, for Alloy Steels/Hardened Metals - 2 Flute - 55HRC TiAlN Coated (5Pcs, 1/8)

More from Industrial & Scientific
Search only JARROW TOOL brand name
Jarrow Tool Carbide Ball Nose End Mill for CNC Machine Milling Tools, for Alloy Steels/Hardened Metals - 2 Flute - 55HRC TiAlN Coated (5Pcs, 1/8)

Current price: 23.99 USD


Check price and availability


  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • 30 Degree helix angle
  • Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • ☆Apply to Hardness of metal ,carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc
  • ☆End mill bits are suitable for side milling, end milling, finish machining
  • ☆U-shaped bottomgroove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency
  • ☆6pcs 1mm 2mm 3mm 6mm 8mm diameter 4 Flute End Mill Cutter CNC Bits/set,Easier roughing and finishing processing
  • ☆Material: Tungsten Carbide TiAlN Coated,3 times Durable than Carbide
  • Works in all materials
  • Great for Deburring in the machine
  • Made In USA
  • High Surface Quality
  • Premium Micrograin Carbide
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Brand Plunge Router with 1/4" Collet
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp
  • The Router Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining.
  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 5/16 inch Cutting Diameter, 1 inch Cutting Length, 4 inch for Total Length
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Flat Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • PACKAGING - End Mill is shipped in plastic tube for ultimate protection from damage during the shipping process
  • HIGH QUALITY - Made from submicron grain carbide perfect for ultimate wear resistance and high performance
  • SPECIFICATIONS - 3/8" Diameter x 3 Flutes x 3" OAL x 1.125" LOC x Square Corner
  • APPLICATION - Perfect for all milling applications on aluminum and other non-ferrous materials
  • PROUDLY MADE IN THE USA - Precision CNC ground in the heartland of America
  • Higher speeds, deeper cuts and metal removal rates
  • Excellent work piece finishes
  • Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
  • Special flute geometry eliminates vibrations
  • 【SPECIFICATIONS】1/8" Diam, 1/2" LOC, 1/8" Shank Diam, 2" OAL
  • Suitable for Most Steel, Titanium Alloy and Heat-Resistant Alloy
  • Long Service Life, High Cutting Speeds, High Precision
  • Made by Japan, Switzerland, and Germany Production Machines
  • Industrial Quality - Made with Premium Raw Materials

More Info

Melin Tool - 56245 CCMGS-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 1.5000" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter

More from Industrial & Scientific
Search only Melin Tool brand name
Melin Tool - 56245 CCMGS-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 1.5000

Current price: 17.4 USD


Check price and availability


  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • 30 Degree helix angle
  • Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • ☆Apply to Hardness of metal ,carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc
  • ☆End mill bits are suitable for side milling, end milling, finish machining
  • ☆U-shaped bottomgroove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency
  • ☆6pcs 1mm 2mm 3mm 6mm 8mm diameter 4 Flute End Mill Cutter CNC Bits/set,Easier roughing and finishing processing
  • ☆Material: Tungsten Carbide TiAlN Coated,3 times Durable than Carbide
  • Works in all materials
  • Great for Deburring in the machine
  • Made In USA
  • High Surface Quality
  • Premium Micrograin Carbide
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Brand Plunge Router with 1/4" Collet
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp
  • The Router Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining.
  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 5/16 inch Cutting Diameter, 1 inch Cutting Length, 4 inch for Total Length
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Flat Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • PACKAGING - End Mill is shipped in plastic tube for ultimate protection from damage during the shipping process
  • HIGH QUALITY - Made from submicron grain carbide perfect for ultimate wear resistance and high performance
  • SPECIFICATIONS - 3/8" Diameter x 3 Flutes x 3" OAL x 1.125" LOC x Square Corner
  • APPLICATION - Perfect for all milling applications on aluminum and other non-ferrous materials
  • PROUDLY MADE IN THE USA - Precision CNC ground in the heartland of America
  • Higher speeds, deeper cuts and metal removal rates
  • Excellent work piece finishes
  • Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
  • Special flute geometry eliminates vibrations
  • 【SPECIFICATIONS】1/8" Diam, 1/2" LOC, 1/8" Shank Diam, 2" OAL
  • Suitable for Most Steel, Titanium Alloy and Heat-Resistant Alloy
  • Long Service Life, High Cutting Speeds, High Precision
  • Made by Japan, Switzerland, and Germany Production Machines
  • Industrial Quality - Made with Premium Raw Materials
  • Designed to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and nonferrous
  • Use for radius and contouring part surfaces
  • Round shanks allow use with a wide variety of toolholding systems
  • Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

More Info

1    2    3    4    5    6    7    8    9    10