Best End Mills. YG-1 brand. New releases 2021

YG-1 28593 Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, Uncoated Finish, 3" Length, 1/2"

More from Industrial & Scientific
Search only YG-1 brand name
YG-1 28593 Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, Uncoated Finish, 3

Current price: 41.88 USD


Check price and availability


Weight: 0.26 Pounds

  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials

More Info

YG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter

More from Industrial & Scientific
Search only YG-1 brand name
YG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6

Current price: 34.95 USD

Saving: $18.08 (34%)


Check price and availability


Height: 0.393700787 Inches

Length: 5.118110231 Inches

Width: 0.393700787 Inches

Weight: 0.01763698096 Pounds

  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic

More Info

YG-1 28573 Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, Uncoated Finish, 2-1/2" Length, 1/4"

More from Industrial & Scientific
Search only YG-1 brand name
YG-1 28573 Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, Uncoated Finish, 2-1/2

Current price: 18.24 USD


Check price and availability


Height: 0.5 Inches

Length: 3.2 Inches

Width: 0.5 Inches

  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials

More Info

YG-1 28565TC Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, TiCN Finish, 2" Length, 3/16"

More from Industrial & Scientific
Search only YG-1 brand name
YG-1 28565TC Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, TiCN Finish, 2

Current price: 22.23 USD


Check price and availability


  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials

More Info

YG-1 EMB12008 Carbide V7 Mill INOX End Mill, 4 Flute, Regular Length, 1-1/2" Length, 1/8"

More from Industrial & Scientific
Search only YG-1 brand name
YG-1 EMB12008 Carbide V7 Mill INOX End Mill, 4 Flute, Regular Length, 1-1/2

Current price: 11.75 USD


Check price and availability


  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Higher speeds, deeper cuts and metal removal rates
  • Excellent work piece finishes
  • Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
  • Special flute geometry eliminates vibrations

More Info

3/8" YG1 Alu-Power 3 Flute Regular Length Carbide End Mill for Aluminum

More from Industrial & Scientific
Search only YG-1 brand name
3/8

Current price: 24.19 USD


Check price and availability


  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Higher speeds, deeper cuts and metal removal rates
  • Excellent work piece finishes
  • Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
  • Special flute geometry eliminates vibrations

More Info

YG-1 - 9322 E2175 Cobalt Steel Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 6 Flutes, 5" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter

More from Industrial & Scientific
Search only YG-1 brand name
YG-1 - 9322 E2175 Cobalt Steel Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 6 Flutes, 5

Current price: 31.22 USD


Check price and availability


Weight: 0.25 Pounds

  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Higher speeds, deeper cuts and metal removal rates
  • Excellent work piece finishes
  • Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
  • Special flute geometry eliminates vibrations
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
  • Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
  • Six flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills

More Info

YG-1 - 55573 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter

More from Industrial & Scientific
Search only YG-1 brand name
YG-1 - 55573 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4

Current price: 27.4 USD

Saving: $12.17 (31%)


Check price and availability


Weight: 0.1 Pounds

  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Higher speeds, deeper cuts and metal removal rates
  • Excellent work piece finishes
  • Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
  • Special flute geometry eliminates vibrations
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
  • Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
  • Six flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic

More Info

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter

More from Industrial & Scientific
Search only YG-1 brand name
YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3

Current price: 16.68 USD


Check price and availability


  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Higher speeds, deeper cuts and metal removal rates
  • Excellent work piece finishes
  • Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
  • Special flute geometry eliminates vibrations
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
  • Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
  • Six flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic

More Info

YG-1 - 52901 E5018 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 6" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter

More from Industrial & Scientific
Search only YG-1 brand name
YG-1 - 52901 E5018 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 6

Current price: 39.84 USD

Saving: $4.42 (10%)


Check price and availability


  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Superior chip evacuation
  • Maximum-metal removal rate
  • Improved surface roughness-cylindrical margin which is controlled tightly
  • 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting
  • High velocity milling of aluminum & other non-ferrous materials
  • Higher speeds, deeper cuts and metal removal rates
  • Excellent work piece finishes
  • Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
  • Special flute geometry eliminates vibrations
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
  • Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
  • Six flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic

More Info

1    2    3    4    5    6    7    8    9    10