Best End Mills. HHIP brand. New releases 2021

HHIP 8000-0002 4 Flute High Speed Steel End Mill Set, 6 Piece, 3/8" Shank

More from Industrial & Scientific
Search only HHIP brand name
HHIP 8000-0002 4 Flute High Speed Steel End Mill Set, 6 Piece, 3/8

Current price: 35.16 USD


Check price and availability


Height: 2.99999999694 Inches

Length: 5.99999999388 Inches

Width: 2.99999999694 Inches

Weight: 0.69 Pounds

  • Includes the following sizes: 1/8, 3/16, 1/4, 5/16, 3/8 & 1/2"
  • Comes with a stand
  • Center cut
  • High speed steel
  • Single end

More Info

HHIP 5802-0375 3/8" x 3/8" 4 Flute High Speed Steel Single End Center Cut End Mill

More from Industrial & Scientific
Search only HHIP brand name
HHIP 5802-0375 3/8

Current price: 7.42 USD


Check price and availability


Height: 6 Inches

Length: 3 Inches

Width: 1 Inches

Weight: 0.04960400895 Pounds

  • Includes the following sizes: 1/8, 3/16, 1/4, 5/16, 3/8 & 1/2"
  • Comes with a stand
  • Center cut
  • High speed steel
  • Single end
  • For light to medium removal rates and obtaining better surface finishes in steels and steel alloys
  • Used for general purpose machining of both ferrous and nonferrous materials
  • For profiling, shoulder milling and finishing operations
  • Center Cutting
  • Ground From Solid

More Info

HHIP 5801-0501 1/2" x 1/2" 2 Flute High Speed Steel Single End Center Cut End Mill

More from Industrial & Scientific
Search only HHIP brand name
HHIP 5801-0501 1/2

Current price: 8.74 USD


Check price and availability


Height: 6 Inches

Length: 3 Inches

Width: 1 Inches

Weight: 0.14881202685 Pounds

  • Includes the following sizes: 1/8, 3/16, 1/4, 5/16, 3/8 & 1/2"
  • Comes with a stand
  • Center cut
  • High speed steel
  • Single end
  • For light to medium removal rates and obtaining better surface finishes in steels and steel alloys
  • Used for general purpose machining of both ferrous and nonferrous materials
  • For profiling, shoulder milling and finishing operations
  • Center Cutting
  • Ground From Solid
  • Used for general purpose machining of both ferrous and nonferrous materials
  • Preferred for small and medium removal rates on soft, tough and long chip materials such as aluminum, copper & brass
  • Used for slotting, ramping, pocketing and plunging operations
  • Center Cutting
  • Ground From Solid

More Info

HHIP 3900-1005 5-Piece R8 End Mill Holder Set, 3/16-3/4"

More from Industrial & Scientific
Search only HHIP brand name
HHIP 3900-1005 5-Piece R8 End Mill Holder Set, 3/16-3/4

Current price: 84.05 USD

Saving: $5.05 (6%)


Check price and availability


Height: 10.16141731247 Inches

Length: 20.31889761707 Inches

Width: 10.16141731247 Inches

  • Includes the following sizes: 1/8, 3/16, 1/4, 5/16, 3/8 & 1/2"
  • Comes with a stand
  • Center cut
  • High speed steel
  • Single end
  • For light to medium removal rates and obtaining better surface finishes in steels and steel alloys
  • Used for general purpose machining of both ferrous and nonferrous materials
  • For profiling, shoulder milling and finishing operations
  • Center Cutting
  • Ground From Solid
  • Used for general purpose machining of both ferrous and nonferrous materials
  • Preferred for small and medium removal rates on soft, tough and long chip materials such as aluminum, copper & brass
  • Used for slotting, ramping, pocketing and plunging operations
  • Center Cutting
  • Ground From Solid
  • For double and single end mills (single end mils only for sizes over 5/8")
  • 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20
  • Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8")
  • Hardened and ground For Bridgeport type milling machines
  • 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20

More Info

HHIP 8001-0007 6 Piece High Speed Steel M2 Ball Nose End Mill Set, 4-Flute, 1/8" - 1/2" Size Range

More from Industrial & Scientific
Search only HHIP brand name
HHIP 8001-0007 6 Piece High Speed Steel M2 Ball Nose End Mill Set, 4-Flute, 1/8

Current price: 61.1 USD


Check price and availability


Height: 5.99999999388 Inches

Length: 3.99999999592 Inches

Width: 7.99999999184 Inches

Weight: 0.74 Pounds

  • Includes the following sizes: 1/8, 3/16, 1/4, 5/16, 3/8 & 1/2"
  • Comes with a stand
  • Center cut
  • High speed steel
  • Single end
  • For light to medium removal rates and obtaining better surface finishes in steels and steel alloys
  • Used for general purpose machining of both ferrous and nonferrous materials
  • For profiling, shoulder milling and finishing operations
  • Center Cutting
  • Ground From Solid
  • Used for general purpose machining of both ferrous and nonferrous materials
  • Preferred for small and medium removal rates on soft, tough and long chip materials such as aluminum, copper & brass
  • Used for slotting, ramping, pocketing and plunging operations
  • Center Cutting
  • Ground From Solid
  • For double and single end mills (single end mils only for sizes over 5/8")
  • 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20
  • Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8")
  • Hardened and ground For Bridgeport type milling machines
  • 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20
  • Wooden stand included
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Center cut and single end
  • Made of high speed steel

More Info

HHIP 4952-0004 2 and 4 Flute End Mill Set, 3/8" Edge and Center Finder, Center Drills

More from Industrial & Scientific
Search only HHIP brand name
HHIP 4952-0004 2 and 4 Flute End Mill Set, 3/8

Current price: 159.04 USD


Check price and availability


Height: 4 Inches

Length: 11 Inches

Width: 5 Inches

Weight: 3 Pounds

  • Includes the following sizes: 1/8, 3/16, 1/4, 5/16, 3/8 & 1/2"
  • Comes with a stand
  • Center cut
  • High speed steel
  • Single end
  • For light to medium removal rates and obtaining better surface finishes in steels and steel alloys
  • Used for general purpose machining of both ferrous and nonferrous materials
  • For profiling, shoulder milling and finishing operations
  • Center Cutting
  • Ground From Solid
  • Used for general purpose machining of both ferrous and nonferrous materials
  • Preferred for small and medium removal rates on soft, tough and long chip materials such as aluminum, copper & brass
  • Used for slotting, ramping, pocketing and plunging operations
  • Center Cutting
  • Ground From Solid
  • For double and single end mills (single end mils only for sizes over 5/8")
  • 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20
  • Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8")
  • Hardened and ground For Bridgeport type milling machines
  • 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20
  • Wooden stand included
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Center cut and single end
  • Made of high speed steel
  • The finder has a 0. 200" tip diameter and accuracy is . 0002"
  • Combination edge and center finder is hardened and ground all over
  • The end mill set is center cut and 3/16-3/4" by 16ths
  • End mill set is titanium coated high speed steel for longer life

More Info

HHIP 5823-0752 4 Flute M42 Cobalt Fine-Pitch Roughing End Mill, 3/4" x 3/4" x 3"

More from Industrial & Scientific
Search only HHIP brand name
HHIP 5823-0752 4 Flute M42 Cobalt Fine-Pitch Roughing End Mill, 3/4

Current price: 46.98 USD


Check price and availability


Height: 6 Inches

Length: 3 Inches

Width: 1 Inches

Weight: 0.4960400895 Pounds

  • Includes the following sizes: 1/8, 3/16, 1/4, 5/16, 3/8 & 1/2"
  • Comes with a stand
  • Center cut
  • High speed steel
  • Single end
  • For light to medium removal rates and obtaining better surface finishes in steels and steel alloys
  • Used for general purpose machining of both ferrous and nonferrous materials
  • For profiling, shoulder milling and finishing operations
  • Center Cutting
  • Ground From Solid
  • Used for general purpose machining of both ferrous and nonferrous materials
  • Preferred for small and medium removal rates on soft, tough and long chip materials such as aluminum, copper & brass
  • Used for slotting, ramping, pocketing and plunging operations
  • Center Cutting
  • Ground From Solid
  • For double and single end mills (single end mils only for sizes over 5/8")
  • 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20
  • Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8")
  • Hardened and ground For Bridgeport type milling machines
  • 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20
  • Wooden stand included
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Center cut and single end
  • Made of high speed steel
  • The finder has a 0. 200" tip diameter and accuracy is . 0002"
  • Combination edge and center finder is hardened and ground all over
  • The end mill set is center cut and 3/16-3/4" by 16ths
  • End mill set is titanium coated high speed steel for longer life
  • The pressure of the cut is distributed over many teeth
  • Recommended for high production milling in difficult-to-machine materials such as inconel, hastily, titanium alloys and other materials up to RC 40
  • Center cutting
  • 8% cobalt
  • Ground From Solid M42 Blank

More Info

HHIP 1/2 INCH R8 Shell END Mill Holder (3900-1711)

More from Industrial & Scientific
Search only HHIP brand name
HHIP 1/2 INCH R8 Shell END Mill Holder (3900-1711)

Current price: 44.66 USD


Check price and availability


Height: 6 Inches

Length: 3 Inches

Width: 1 Inches

Weight: 1.17 Pounds

  • Includes the following sizes: 1/8, 3/16, 1/4, 5/16, 3/8 & 1/2"
  • Comes with a stand
  • Center cut
  • High speed steel
  • Single end
  • For light to medium removal rates and obtaining better surface finishes in steels and steel alloys
  • Used for general purpose machining of both ferrous and nonferrous materials
  • For profiling, shoulder milling and finishing operations
  • Center Cutting
  • Ground From Solid
  • Used for general purpose machining of both ferrous and nonferrous materials
  • Preferred for small and medium removal rates on soft, tough and long chip materials such as aluminum, copper & brass
  • Used for slotting, ramping, pocketing and plunging operations
  • Center Cutting
  • Ground From Solid
  • For double and single end mills (single end mils only for sizes over 5/8")
  • 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20
  • Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8")
  • Hardened and ground For Bridgeport type milling machines
  • 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20
  • Wooden stand included
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Center cut and single end
  • Made of high speed steel
  • The finder has a 0. 200" tip diameter and accuracy is . 0002"
  • Combination edge and center finder is hardened and ground all over
  • The end mill set is center cut and 3/16-3/4" by 16ths
  • End mill set is titanium coated high speed steel for longer life
  • The pressure of the cut is distributed over many teeth
  • Recommended for high production milling in difficult-to-machine materials such as inconel, hastily, titanium alloys and other materials up to RC 40
  • Center cutting
  • 8% cobalt
  • Ground From Solid M42 Blank
  • For Bridgeport type mills
  • DRAWBAR 7/16-20
  • Hardened and ground.
  • Diameter range of standard end mills is 1-1/4 to 1-1/2".
  • Diameter for Bore in Shell End Mill 1/2"

More Info

HHIP 1006-0011 1-1/2 Inch R8 Indexable End Mill

More from Industrial & Scientific
Search only HHIP brand name
HHIP 1006-0011 1-1/2 Inch R8 Indexable End Mill

Current price: 49.28 USD


Check price and availability


Height: 1 Inches

Length: 2 Inches

Width: 6 Inches

Weight: 0.992080179 Pounds

  • Includes the following sizes: 1/8, 3/16, 1/4, 5/16, 3/8 & 1/2"
  • Comes with a stand
  • Center cut
  • High speed steel
  • Single end
  • For light to medium removal rates and obtaining better surface finishes in steels and steel alloys
  • Used for general purpose machining of both ferrous and nonferrous materials
  • For profiling, shoulder milling and finishing operations
  • Center Cutting
  • Ground From Solid
  • Used for general purpose machining of both ferrous and nonferrous materials
  • Preferred for small and medium removal rates on soft, tough and long chip materials such as aluminum, copper & brass
  • Used for slotting, ramping, pocketing and plunging operations
  • Center Cutting
  • Ground From Solid
  • For double and single end mills (single end mils only for sizes over 5/8")
  • 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20
  • Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8")
  • Hardened and ground For Bridgeport type milling machines
  • 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20
  • Wooden stand included
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Center cut and single end
  • Made of high speed steel
  • The finder has a 0. 200" tip diameter and accuracy is . 0002"
  • Combination edge and center finder is hardened and ground all over
  • The end mill set is center cut and 3/16-3/4" by 16ths
  • End mill set is titanium coated high speed steel for longer life
  • The pressure of the cut is distributed over many teeth
  • Recommended for high production milling in difficult-to-machine materials such as inconel, hastily, titanium alloys and other materials up to RC 40
  • Center cutting
  • 8% cobalt
  • Ground From Solid M42 Blank
  • For Bridgeport type mills
  • DRAWBAR 7/16-20
  • Hardened and ground.
  • Diameter range of standard end mills is 1-1/4 to 1-1/2".
  • Diameter for Bore in Shell End Mill 1/2"
  • Replacement insert(TPG-32) (Item# 1006-0015)Higher metal removal rates.; R8 Shank
  • For use in Heavy Duty milling application
  • Inserts TP.-32 x 3; Inserts included
  • Cutting Diameter 1-1/2"; Length of Cut 1-3/8"

More Info

HHIP 5800-4020 1/16" x 3/8" HSS Corner Rounding End Mill

More from Industrial & Scientific
Search only HHIP brand name
HHIP 5800-4020 1/16

Current price: 11.62 USD


Check price and availability


Height: 6 Inches

Length: 3 Inches

Width: 1 Inches

Weight: 0.0220462262 Pounds

  • Includes the following sizes: 1/8, 3/16, 1/4, 5/16, 3/8 & 1/2"
  • Comes with a stand
  • Center cut
  • High speed steel
  • Single end
  • For light to medium removal rates and obtaining better surface finishes in steels and steel alloys
  • Used for general purpose machining of both ferrous and nonferrous materials
  • For profiling, shoulder milling and finishing operations
  • Center Cutting
  • Ground From Solid
  • Used for general purpose machining of both ferrous and nonferrous materials
  • Preferred for small and medium removal rates on soft, tough and long chip materials such as aluminum, copper & brass
  • Used for slotting, ramping, pocketing and plunging operations
  • Center Cutting
  • Ground From Solid
  • For double and single end mills (single end mils only for sizes over 5/8")
  • 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20
  • Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8")
  • Hardened and ground For Bridgeport type milling machines
  • 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20
  • Wooden stand included
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Center cut and single end
  • Made of high speed steel
  • The finder has a 0. 200" tip diameter and accuracy is . 0002"
  • Combination edge and center finder is hardened and ground all over
  • The end mill set is center cut and 3/16-3/4" by 16ths
  • End mill set is titanium coated high speed steel for longer life
  • The pressure of the cut is distributed over many teeth
  • Recommended for high production milling in difficult-to-machine materials such as inconel, hastily, titanium alloys and other materials up to RC 40
  • Center cutting
  • 8% cobalt
  • Ground From Solid M42 Blank
  • For Bridgeport type mills
  • DRAWBAR 7/16-20
  • Hardened and ground.
  • Diameter range of standard end mills is 1-1/4 to 1-1/2".
  • Diameter for Bore in Shell End Mill 1/2"
  • Replacement insert(TPG-32) (Item# 1006-0015)Higher metal removal rates.; R8 Shank
  • For use in Heavy Duty milling application
  • Inserts TP.-32 x 3; Inserts included
  • Cutting Diameter 1-1/2"; Length of Cut 1-3/8"
  • Shank diameter is 3/8". Overall length is 2-1/2
  • Radius is 1/16". Mill diameter is 7/16"
  • Right hand cut. Formed radius cutter
  • Form-relieved type; can be sharpened many times without changing the form
  • Intended for use in milling rounded corners, etc

More Info

1    2    3    4    5    6    7    8    9    10