High quality Drywall Lifts. Reviews September, 2021, page 3

Drywall Carrying Tool - Panel Carrier - Plywood Gripper - Drywall Panel Lifter - Sheetrock Lift – Rock Jaw - Heavy Metal Gripper - with Single Hand

Search only YA YATECH brand name
Drywall Carrying Tool - Panel Carrier - Plywood Gripper - Drywall Panel Lifter - Sheetrock Lift – Rock Jaw - Heavy Metal Gripper - with Single Hand

Current price: 18.99 USD


Check price and availability


  • FINEST MATERIAL:the clamp is machined from aerospace-grade aluminum. The handle is made of durable, impact-resistant ABS polymer, making it comfort on your shouders.
  • WIDE APPLICABLE RANGE: automatically adjust to accommodate sheet thickness up to 15/16 inches up to 200 pounds and up to 2 pieces of sheets at the same time. Suitable for carrying 4x8 plywood, drywall, wall board, windows, doors, skylights, solar panels, roof trusses, framing materials, stone slabs and more.
  • EASY TO USE : carry plywwod, drywall, sheet metal, and more with one hand. Easy to go up and down stairs and through doors. Labor saving and helping to alleviate back problems.

More Info

TINVHY 16FT Drywall Lift Plasterboard Panel Hoist Jack with Caster Construction Lifter Carrier Safety Lock

Search only TINVHY brand name
TINVHY 16FT Drywall Lift Plasterboard Panel Hoist Jack with Caster Construction Lifter Carrier Safety Lock

Current price: 254.99 USD


Check price and availability


Height: 6.692913379 Inches

Length: 71.653543234 Inches

Width: 19.291338563 Inches

Weight: 9.1381607599 Pounds

  • FINEST MATERIAL:the clamp is machined from aerospace-grade aluminum. The handle is made of durable, impact-resistant ABS polymer, making it comfort on your shouders.
  • WIDE APPLICABLE RANGE: automatically adjust to accommodate sheet thickness up to 15/16 inches up to 200 pounds and up to 2 pieces of sheets at the same time. Suitable for carrying 4x8 plywood, drywall, wall board, windows, doors, skylights, solar panels, roof trusses, framing materials, stone slabs and more.
  • EASY TO USE : carry plywwod, drywall, sheet metal, and more with one hand. Easy to go up and down stairs and through doors. Labor saving and helping to alleviate back problems.
  • Safe and in good balance - The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism
  • Tool Free Assembly - Easy assemble, no tool required. Quick tool-free setup and disassembly for storage
  • Easy to Operate - This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them
  • Versatile Function - Features a 16 reach for flat ceilings and over 19 reach on walls/angled ceilings; the cradle rotates 360, tilts 65 forward/backward and 10 side-to-side for use on both flat and sloped ceilings
  • Load Capacity - This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs

More Info

11' Drywall Lift Rolling Panel Hoist Jack Lifter Construction Tools with Adjustable Telescopic Arm Lockable Caster Wheel, 150 lbs

Search only PMSW brand name
11' Drywall Lift Rolling Panel Hoist Jack Lifter Construction Tools with Adjustable Telescopic Arm Lockable Caster Wheel, 150 lbs

Current price: 199.99 USD


Check price and availability


  • FINEST MATERIAL:the clamp is machined from aerospace-grade aluminum. The handle is made of durable, impact-resistant ABS polymer, making it comfort on your shouders.
  • WIDE APPLICABLE RANGE: automatically adjust to accommodate sheet thickness up to 15/16 inches up to 200 pounds and up to 2 pieces of sheets at the same time. Suitable for carrying 4x8 plywood, drywall, wall board, windows, doors, skylights, solar panels, roof trusses, framing materials, stone slabs and more.
  • EASY TO USE : carry plywwod, drywall, sheet metal, and more with one hand. Easy to go up and down stairs and through doors. Labor saving and helping to alleviate back problems.
  • Safe and in good balance - The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism
  • Tool Free Assembly - Easy assemble, no tool required. Quick tool-free setup and disassembly for storage
  • Easy to Operate - This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them
  • Versatile Function - Features a 16 reach for flat ceilings and over 19 reach on walls/angled ceilings; the cradle rotates 360, tilts 65 forward/backward and 10 side-to-side for use on both flat and sloped ceilings
  • Load Capacity - This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs
  • Adjustable Telescopic Arm and Panel Rotation-The telescopic arm can be adjusted which is perfect for installing sheets. And it is a rubber telescopic arm that doesn't scratch your panel. This drywall lift can tilt 60° forward or backward and rotate 360°. It is widely used in flat and inclined ceilings.
  • Safe and in good balance-The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cable of the Panel Hoist.
  • Allows one person working alone-This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them.
  • Tool free assembly--Easy assemble, no tool required. Quick tool-free setup and dis-assembly for storage.
  • 150LBS 11' Drywall Lift-Heavy duty steel construction, Max Load Capacity: 150 LBS

More Info

Labor Saving Arm,2 Packs Arm Hand Ttool Jack,Door Panel Lifting Cabinet Jack,Wall Tile Height Adjuster, Father’s Dayg,Men’s gift (2PCS)

Search only MORATER brand name
Labor Saving Arm,2 Packs Arm Hand Ttool Jack,Door Panel Lifting Cabinet Jack,Wall Tile Height Adjuster, Father’s Dayg,Men’s gift (2PCS)

Current price: 32 USD


Check price and availability


  • FINEST MATERIAL:the clamp is machined from aerospace-grade aluminum. The handle is made of durable, impact-resistant ABS polymer, making it comfort on your shouders.
  • WIDE APPLICABLE RANGE: automatically adjust to accommodate sheet thickness up to 15/16 inches up to 200 pounds and up to 2 pieces of sheets at the same time. Suitable for carrying 4x8 plywood, drywall, wall board, windows, doors, skylights, solar panels, roof trusses, framing materials, stone slabs and more.
  • EASY TO USE : carry plywwod, drywall, sheet metal, and more with one hand. Easy to go up and down stairs and through doors. Labor saving and helping to alleviate back problems.
  • Safe and in good balance - The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism
  • Tool Free Assembly - Easy assemble, no tool required. Quick tool-free setup and disassembly for storage
  • Easy to Operate - This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them
  • Versatile Function - Features a 16 reach for flat ceilings and over 19 reach on walls/angled ceilings; the cradle rotates 360, tilts 65 forward/backward and 10 side-to-side for use on both flat and sloped ceilings
  • Load Capacity - This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs
  • Adjustable Telescopic Arm and Panel Rotation-The telescopic arm can be adjusted which is perfect for installing sheets. And it is a rubber telescopic arm that doesn't scratch your panel. This drywall lift can tilt 60° forward or backward and rotate 360°. It is widely used in flat and inclined ceilings.
  • Safe and in good balance-The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cable of the Panel Hoist.
  • Allows one person working alone-This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them.
  • Tool free assembly--Easy assemble, no tool required. Quick tool-free setup and dis-assembly for storage.
  • 150LBS 11' Drywall Lift-Heavy duty steel construction, Max Load Capacity: 150 LBS
  • 【 Multifunctional Board Lifter Cabinet Jack】 Wall Tile Leveler Device, The height can be easily adjusted by holding the handle. Durable, strong elasticity and large bearing capacity. The thicker supports are more load-bearing. Small size, light weight, Tile Leveling System easy to carry.
  • 【Handheld Design】Thanks to the unique structure of the handheld jack, all of these and more can be done easily with controlled accuracy.Can replace multiple "traditional" tools, improve productivity, save time and money.
  • Easy to Use】The installation of doors, windows and cabinets are obvious uses, but the construction of floors and porches, decks and frames are also great opportunities to use this ingenious tool.
  • 【Heavy Duty】 It’s made of rugged structure, highest quality components. With a lifting capacity of up to 330 lb / 120 kg, the range of applications is virtually unlimited.And It can be raised by 20cm/11.81 inches in height.
  • 【Innovative Design】labor saving arm jack An innovative universal tool for lifting, pressing, precise fastening and control. The anti-decoupling design prevents slippage by restricting the plate.

More Info

FastCap 3rd Hand Support System 57-to-144-Inches, 2-pack #3HAND5

Search only Laserjamb brand name
FastCap 3rd Hand Support System 57-to-144-Inches, 2-pack #3HAND5

Current price: 69.99 USD


Check price and availability


Height: 5 Inches

Length: 59 Inches

Width: 5 Inches

Weight: 14.109584768 Pounds

Warranty: Guaranteed against defects in materials and workmanship

  • FINEST MATERIAL:the clamp is machined from aerospace-grade aluminum. The handle is made of durable, impact-resistant ABS polymer, making it comfort on your shouders.
  • WIDE APPLICABLE RANGE: automatically adjust to accommodate sheet thickness up to 15/16 inches up to 200 pounds and up to 2 pieces of sheets at the same time. Suitable for carrying 4x8 plywood, drywall, wall board, windows, doors, skylights, solar panels, roof trusses, framing materials, stone slabs and more.
  • EASY TO USE : carry plywwod, drywall, sheet metal, and more with one hand. Easy to go up and down stairs and through doors. Labor saving and helping to alleviate back problems.
  • Safe and in good balance - The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism
  • Tool Free Assembly - Easy assemble, no tool required. Quick tool-free setup and disassembly for storage
  • Easy to Operate - This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them
  • Versatile Function - Features a 16 reach for flat ceilings and over 19 reach on walls/angled ceilings; the cradle rotates 360, tilts 65 forward/backward and 10 side-to-side for use on both flat and sloped ceilings
  • Load Capacity - This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs
  • Adjustable Telescopic Arm and Panel Rotation-The telescopic arm can be adjusted which is perfect for installing sheets. And it is a rubber telescopic arm that doesn't scratch your panel. This drywall lift can tilt 60° forward or backward and rotate 360°. It is widely used in flat and inclined ceilings.
  • Safe and in good balance-The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cable of the Panel Hoist.
  • Allows one person working alone-This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them.
  • Tool free assembly--Easy assemble, no tool required. Quick tool-free setup and dis-assembly for storage.
  • 150LBS 11' Drywall Lift-Heavy duty steel construction, Max Load Capacity: 150 LBS
  • 【 Multifunctional Board Lifter Cabinet Jack】 Wall Tile Leveler Device, The height can be easily adjusted by holding the handle. Durable, strong elasticity and large bearing capacity. The thicker supports are more load-bearing. Small size, light weight, Tile Leveling System easy to carry.
  • 【Handheld Design】Thanks to the unique structure of the handheld jack, all of these and more can be done easily with controlled accuracy.Can replace multiple "traditional" tools, improve productivity, save time and money.
  • Easy to Use】The installation of doors, windows and cabinets are obvious uses, but the construction of floors and porches, decks and frames are also great opportunities to use this ingenious tool.
  • 【Heavy Duty】 It’s made of rugged structure, highest quality components. With a lifting capacity of up to 330 lb / 120 kg, the range of applications is virtually unlimited.And It can be raised by 20cm/11.81 inches in height.
  • 【Innovative Design】labor saving arm jack An innovative universal tool for lifting, pressing, precise fastening and control. The anti-decoupling design prevents slippage by restricting the plate.
  • 2 identical supports included.Load Capacity(each) - 150 lbs
  • Quick release lever
  • Textured rubber pads for gripping
  • Fully articulated ends
  • Reaches 5-to 12-feet; Action lever for secure pressure

More Info

BoardMate - Drywall Fitting Tool, Supports The Board in Place While Installing

Search only BoardMate brand name
BoardMate - Drywall Fitting Tool, Supports The Board in Place While Installing

Current price: 9.99 USD

Saving: $5.00 (33%)


Check price and availability


Height: 0.3937 Inches

Length: 5.9055 Inches

Width: 3.34645 Inches

Weight: 0.1000016820432 Pounds

  • FINEST MATERIAL:the clamp is machined from aerospace-grade aluminum. The handle is made of durable, impact-resistant ABS polymer, making it comfort on your shouders.
  • WIDE APPLICABLE RANGE: automatically adjust to accommodate sheet thickness up to 15/16 inches up to 200 pounds and up to 2 pieces of sheets at the same time. Suitable for carrying 4x8 plywood, drywall, wall board, windows, doors, skylights, solar panels, roof trusses, framing materials, stone slabs and more.
  • EASY TO USE : carry plywwod, drywall, sheet metal, and more with one hand. Easy to go up and down stairs and through doors. Labor saving and helping to alleviate back problems.
  • Safe and in good balance - The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism
  • Tool Free Assembly - Easy assemble, no tool required. Quick tool-free setup and disassembly for storage
  • Easy to Operate - This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them
  • Versatile Function - Features a 16 reach for flat ceilings and over 19 reach on walls/angled ceilings; the cradle rotates 360, tilts 65 forward/backward and 10 side-to-side for use on both flat and sloped ceilings
  • Load Capacity - This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs
  • Adjustable Telescopic Arm and Panel Rotation-The telescopic arm can be adjusted which is perfect for installing sheets. And it is a rubber telescopic arm that doesn't scratch your panel. This drywall lift can tilt 60° forward or backward and rotate 360°. It is widely used in flat and inclined ceilings.
  • Safe and in good balance-The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cable of the Panel Hoist.
  • Allows one person working alone-This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them.
  • Tool free assembly--Easy assemble, no tool required. Quick tool-free setup and dis-assembly for storage.
  • 150LBS 11' Drywall Lift-Heavy duty steel construction, Max Load Capacity: 150 LBS
  • 【 Multifunctional Board Lifter Cabinet Jack】 Wall Tile Leveler Device, The height can be easily adjusted by holding the handle. Durable, strong elasticity and large bearing capacity. The thicker supports are more load-bearing. Small size, light weight, Tile Leveling System easy to carry.
  • 【Handheld Design】Thanks to the unique structure of the handheld jack, all of these and more can be done easily with controlled accuracy.Can replace multiple "traditional" tools, improve productivity, save time and money.
  • Easy to Use】The installation of doors, windows and cabinets are obvious uses, but the construction of floors and porches, decks and frames are also great opportunities to use this ingenious tool.
  • 【Heavy Duty】 It’s made of rugged structure, highest quality components. With a lifting capacity of up to 330 lb / 120 kg, the range of applications is virtually unlimited.And It can be raised by 20cm/11.81 inches in height.
  • 【Innovative Design】labor saving arm jack An innovative universal tool for lifting, pressing, precise fastening and control. The anti-decoupling design prevents slippage by restricting the plate.
  • 2 identical supports included.Load Capacity(each) - 150 lbs
  • Quick release lever
  • Textured rubber pads for gripping
  • Fully articulated ends
  • Reaches 5-to 12-feet; Action lever for secure pressure
  • Recommended – Boards are left lightly butted as specified by industry
  • Accurate - Allows the fixer check the board is perfectly aligned before fixing
  • Flexible - Allows one person efficiently board ceilings
  • Effort - Take the neck ache out of holding up plasterboard sheets
  • Quick - Speeds up boarding a ceiling by 50% (2 in a set)

More Info

XINQIAO Support Pole, Steel Telescopic Quick Support Rod, Adjustable 3rd Hand Support System, Supports up to 154 lbs Construction Tools for Cabinet Jacks Cargo Bars Drywalls (Long-2 rods, Blue)

Search only XINQIAO brand name
XINQIAO Support Pole, Steel Telescopic Quick Support Rod, Adjustable 3rd Hand Support System, Supports up to 154 lbs Construction Tools for Cabinet Jacks Cargo Bars Drywalls (Long-2 rods, Blue)

Current price: 88.99 USD


Check price and availability


  • FINEST MATERIAL:the clamp is machined from aerospace-grade aluminum. The handle is made of durable, impact-resistant ABS polymer, making it comfort on your shouders.
  • WIDE APPLICABLE RANGE: automatically adjust to accommodate sheet thickness up to 15/16 inches up to 200 pounds and up to 2 pieces of sheets at the same time. Suitable for carrying 4x8 plywood, drywall, wall board, windows, doors, skylights, solar panels, roof trusses, framing materials, stone slabs and more.
  • EASY TO USE : carry plywwod, drywall, sheet metal, and more with one hand. Easy to go up and down stairs and through doors. Labor saving and helping to alleviate back problems.
  • Safe and in good balance - The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism
  • Tool Free Assembly - Easy assemble, no tool required. Quick tool-free setup and disassembly for storage
  • Easy to Operate - This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them
  • Versatile Function - Features a 16 reach for flat ceilings and over 19 reach on walls/angled ceilings; the cradle rotates 360, tilts 65 forward/backward and 10 side-to-side for use on both flat and sloped ceilings
  • Load Capacity - This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs
  • Adjustable Telescopic Arm and Panel Rotation-The telescopic arm can be adjusted which is perfect for installing sheets. And it is a rubber telescopic arm that doesn't scratch your panel. This drywall lift can tilt 60° forward or backward and rotate 360°. It is widely used in flat and inclined ceilings.
  • Safe and in good balance-The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cable of the Panel Hoist.
  • Allows one person working alone-This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them.
  • Tool free assembly--Easy assemble, no tool required. Quick tool-free setup and dis-assembly for storage.
  • 150LBS 11' Drywall Lift-Heavy duty steel construction, Max Load Capacity: 150 LBS
  • 【 Multifunctional Board Lifter Cabinet Jack】 Wall Tile Leveler Device, The height can be easily adjusted by holding the handle. Durable, strong elasticity and large bearing capacity. The thicker supports are more load-bearing. Small size, light weight, Tile Leveling System easy to carry.
  • 【Handheld Design】Thanks to the unique structure of the handheld jack, all of these and more can be done easily with controlled accuracy.Can replace multiple "traditional" tools, improve productivity, save time and money.
  • Easy to Use】The installation of doors, windows and cabinets are obvious uses, but the construction of floors and porches, decks and frames are also great opportunities to use this ingenious tool.
  • 【Heavy Duty】 It’s made of rugged structure, highest quality components. With a lifting capacity of up to 330 lb / 120 kg, the range of applications is virtually unlimited.And It can be raised by 20cm/11.81 inches in height.
  • 【Innovative Design】labor saving arm jack An innovative universal tool for lifting, pressing, precise fastening and control. The anti-decoupling design prevents slippage by restricting the plate.
  • 2 identical supports included.Load Capacity(each) - 150 lbs
  • Quick release lever
  • Textured rubber pads for gripping
  • Fully articulated ends
  • Reaches 5-to 12-feet; Action lever for secure pressure
  • Recommended – Boards are left lightly butted as specified by industry
  • Accurate - Allows the fixer check the board is perfectly aligned before fixing
  • Flexible - Allows one person efficiently board ceilings
  • Effort - Take the neck ache out of holding up plasterboard sheets
  • Quick - Speeds up boarding a ceiling by 50% (2 in a set)
  • FREE YOUR HANDS: Quick support pole secures building materials to keep your hands free by offering you a third hand. If you ever wished you had an extra hand when you were working alone, this install pole rod will help you a lot.
  • ADDITIONAL FEATURES: Spring-loaded pins that pop out into holes in the outer pole can lock the height. A white calibration line helps realign the pins with the holes if the rod is rotated. Pinch-prevent design protects your hand when extending the rod. 2 pairs of pads (3.8 x 2.8 in and 5.2 x 3.2 in) can be replaced as needed.
  • ADJUSTABLE SUPPORT TOOL: The adjustable height and textured rubber face help hold the rod tight for various purposes. Long Rod expands from 49.2 to 114.2 in (125 to 290 cm); Short Rod expands from 23.6 to 45.3 in (60 to 115 cm). The handle is used for minute adjustment.
  • DURABLE EXTENSION POLE: The extendable rod has GS certification. The weight capacity is 154 lb (70 kg). The stem rod is made of high-density metal and the handle is cast in premium aluminum. Non-slip TPR pads and an additional pair of bigger PVC pads meet various working conditions.
  • MULTIPLE USAGE: This 3rd hand support system is well made and handy for lots of woodworking projects such as a brace, jack, or support for drywall, crown moldings, cabinets hand, dust barriers and so on. It can also be used for a cargo bar.

More Info

Task Tools T74500 63 - 120 Inch Quick Support Rod

Search only Task Tools brand name
Task Tools T74500 63 - 120 Inch Quick Support Rod

Current price: 37.77 USD

Saving: $4.74 (11%)


Check price and availability


Height: 2 Inches

Length: 64 Inches

Width: 3.5 Inches

Weight: 5.49 Pounds

  • FINEST MATERIAL:the clamp is machined from aerospace-grade aluminum. The handle is made of durable, impact-resistant ABS polymer, making it comfort on your shouders.
  • WIDE APPLICABLE RANGE: automatically adjust to accommodate sheet thickness up to 15/16 inches up to 200 pounds and up to 2 pieces of sheets at the same time. Suitable for carrying 4x8 plywood, drywall, wall board, windows, doors, skylights, solar panels, roof trusses, framing materials, stone slabs and more.
  • EASY TO USE : carry plywwod, drywall, sheet metal, and more with one hand. Easy to go up and down stairs and through doors. Labor saving and helping to alleviate back problems.
  • Safe and in good balance - The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism
  • Tool Free Assembly - Easy assemble, no tool required. Quick tool-free setup and disassembly for storage
  • Easy to Operate - This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them
  • Versatile Function - Features a 16 reach for flat ceilings and over 19 reach on walls/angled ceilings; the cradle rotates 360, tilts 65 forward/backward and 10 side-to-side for use on both flat and sloped ceilings
  • Load Capacity - This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs
  • Adjustable Telescopic Arm and Panel Rotation-The telescopic arm can be adjusted which is perfect for installing sheets. And it is a rubber telescopic arm that doesn't scratch your panel. This drywall lift can tilt 60° forward or backward and rotate 360°. It is widely used in flat and inclined ceilings.
  • Safe and in good balance-The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cable of the Panel Hoist.
  • Allows one person working alone-This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them.
  • Tool free assembly--Easy assemble, no tool required. Quick tool-free setup and dis-assembly for storage.
  • 150LBS 11' Drywall Lift-Heavy duty steel construction, Max Load Capacity: 150 LBS
  • 【 Multifunctional Board Lifter Cabinet Jack】 Wall Tile Leveler Device, The height can be easily adjusted by holding the handle. Durable, strong elasticity and large bearing capacity. The thicker supports are more load-bearing. Small size, light weight, Tile Leveling System easy to carry.
  • 【Handheld Design】Thanks to the unique structure of the handheld jack, all of these and more can be done easily with controlled accuracy.Can replace multiple "traditional" tools, improve productivity, save time and money.
  • Easy to Use】The installation of doors, windows and cabinets are obvious uses, but the construction of floors and porches, decks and frames are also great opportunities to use this ingenious tool.
  • 【Heavy Duty】 It’s made of rugged structure, highest quality components. With a lifting capacity of up to 330 lb / 120 kg, the range of applications is virtually unlimited.And It can be raised by 20cm/11.81 inches in height.
  • 【Innovative Design】labor saving arm jack An innovative universal tool for lifting, pressing, precise fastening and control. The anti-decoupling design prevents slippage by restricting the plate.
  • 2 identical supports included.Load Capacity(each) - 150 lbs
  • Quick release lever
  • Textured rubber pads for gripping
  • Fully articulated ends
  • Reaches 5-to 12-feet; Action lever for secure pressure
  • Recommended – Boards are left lightly butted as specified by industry
  • Accurate - Allows the fixer check the board is perfectly aligned before fixing
  • Flexible - Allows one person efficiently board ceilings
  • Effort - Take the neck ache out of holding up plasterboard sheets
  • Quick - Speeds up boarding a ceiling by 50% (2 in a set)
  • FREE YOUR HANDS: Quick support pole secures building materials to keep your hands free by offering you a third hand. If you ever wished you had an extra hand when you were working alone, this install pole rod will help you a lot.
  • ADDITIONAL FEATURES: Spring-loaded pins that pop out into holes in the outer pole can lock the height. A white calibration line helps realign the pins with the holes if the rod is rotated. Pinch-prevent design protects your hand when extending the rod. 2 pairs of pads (3.8 x 2.8 in and 5.2 x 3.2 in) can be replaced as needed.
  • ADJUSTABLE SUPPORT TOOL: The adjustable height and textured rubber face help hold the rod tight for various purposes. Long Rod expands from 49.2 to 114.2 in (125 to 290 cm); Short Rod expands from 23.6 to 45.3 in (60 to 115 cm). The handle is used for minute adjustment.
  • DURABLE EXTENSION POLE: The extendable rod has GS certification. The weight capacity is 154 lb (70 kg). The stem rod is made of high-density metal and the handle is cast in premium aluminum. Non-slip TPR pads and an additional pair of bigger PVC pads meet various working conditions.
  • MULTIPLE USAGE: This 3rd hand support system is well made and handy for lots of woodworking projects such as a brace, jack, or support for drywall, crown moldings, cabinets hand, dust barriers and so on. It can also be used for a cargo bar.
  • Expands from 81 inches to 108 inches
  • Adjustable rubber face holds the rod tight
  • Ideal for drywall, crown moldings, cabinets, dust barriers, tub surrounds, and heating and ventilation ducts
  • Rotating body expands the rod, which locks tightly into place
  • Convenient quick support rod secures building materials to keep your hands free

More Info

2 Packs Hand Lifting Tool Jack, Labor-saving Arm Jack, The Height can be Raised by 5-100mm, Door Panel, Up to 265 lb, Board Lifter, Wall Tile Height Adjuster SISI HOT

Search only SISI HOT brand name
2 Packs Hand Lifting Tool Jack, Labor-saving Arm Jack, The Height can be Raised by 5-100mm, Door Panel, Up to 265 lb, Board Lifter, Wall Tile Height Adjuster SISI HOT

Current price: 31.99 USD

Saving: $18.00 (36%)


Check price and availability


  • FINEST MATERIAL:the clamp is machined from aerospace-grade aluminum. The handle is made of durable, impact-resistant ABS polymer, making it comfort on your shouders.
  • WIDE APPLICABLE RANGE: automatically adjust to accommodate sheet thickness up to 15/16 inches up to 200 pounds and up to 2 pieces of sheets at the same time. Suitable for carrying 4x8 plywood, drywall, wall board, windows, doors, skylights, solar panels, roof trusses, framing materials, stone slabs and more.
  • EASY TO USE : carry plywwod, drywall, sheet metal, and more with one hand. Easy to go up and down stairs and through doors. Labor saving and helping to alleviate back problems.
  • Safe and in good balance - The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism
  • Tool Free Assembly - Easy assemble, no tool required. Quick tool-free setup and disassembly for storage
  • Easy to Operate - This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them
  • Versatile Function - Features a 16 reach for flat ceilings and over 19 reach on walls/angled ceilings; the cradle rotates 360, tilts 65 forward/backward and 10 side-to-side for use on both flat and sloped ceilings
  • Load Capacity - This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs
  • Adjustable Telescopic Arm and Panel Rotation-The telescopic arm can be adjusted which is perfect for installing sheets. And it is a rubber telescopic arm that doesn't scratch your panel. This drywall lift can tilt 60° forward or backward and rotate 360°. It is widely used in flat and inclined ceilings.
  • Safe and in good balance-The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cable of the Panel Hoist.
  • Allows one person working alone-This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them.
  • Tool free assembly--Easy assemble, no tool required. Quick tool-free setup and dis-assembly for storage.
  • 150LBS 11' Drywall Lift-Heavy duty steel construction, Max Load Capacity: 150 LBS
  • 【 Multifunctional Board Lifter Cabinet Jack】 Wall Tile Leveler Device, The height can be easily adjusted by holding the handle. Durable, strong elasticity and large bearing capacity. The thicker supports are more load-bearing. Small size, light weight, Tile Leveling System easy to carry.
  • 【Handheld Design】Thanks to the unique structure of the handheld jack, all of these and more can be done easily with controlled accuracy.Can replace multiple "traditional" tools, improve productivity, save time and money.
  • Easy to Use】The installation of doors, windows and cabinets are obvious uses, but the construction of floors and porches, decks and frames are also great opportunities to use this ingenious tool.
  • 【Heavy Duty】 It’s made of rugged structure, highest quality components. With a lifting capacity of up to 330 lb / 120 kg, the range of applications is virtually unlimited.And It can be raised by 20cm/11.81 inches in height.
  • 【Innovative Design】labor saving arm jack An innovative universal tool for lifting, pressing, precise fastening and control. The anti-decoupling design prevents slippage by restricting the plate.
  • 2 identical supports included.Load Capacity(each) - 150 lbs
  • Quick release lever
  • Textured rubber pads for gripping
  • Fully articulated ends
  • Reaches 5-to 12-feet; Action lever for secure pressure
  • Recommended – Boards are left lightly butted as specified by industry
  • Accurate - Allows the fixer check the board is perfectly aligned before fixing
  • Flexible - Allows one person efficiently board ceilings
  • Effort - Take the neck ache out of holding up plasterboard sheets
  • Quick - Speeds up boarding a ceiling by 50% (2 in a set)
  • FREE YOUR HANDS: Quick support pole secures building materials to keep your hands free by offering you a third hand. If you ever wished you had an extra hand when you were working alone, this install pole rod will help you a lot.
  • ADDITIONAL FEATURES: Spring-loaded pins that pop out into holes in the outer pole can lock the height. A white calibration line helps realign the pins with the holes if the rod is rotated. Pinch-prevent design protects your hand when extending the rod. 2 pairs of pads (3.8 x 2.8 in and 5.2 x 3.2 in) can be replaced as needed.
  • ADJUSTABLE SUPPORT TOOL: The adjustable height and textured rubber face help hold the rod tight for various purposes. Long Rod expands from 49.2 to 114.2 in (125 to 290 cm); Short Rod expands from 23.6 to 45.3 in (60 to 115 cm). The handle is used for minute adjustment.
  • DURABLE EXTENSION POLE: The extendable rod has GS certification. The weight capacity is 154 lb (70 kg). The stem rod is made of high-density metal and the handle is cast in premium aluminum. Non-slip TPR pads and an additional pair of bigger PVC pads meet various working conditions.
  • MULTIPLE USAGE: This 3rd hand support system is well made and handy for lots of woodworking projects such as a brace, jack, or support for drywall, crown moldings, cabinets hand, dust barriers and so on. It can also be used for a cargo bar.
  • Expands from 81 inches to 108 inches
  • Adjustable rubber face holds the rod tight
  • Ideal for drywall, crown moldings, cabinets, dust barriers, tub surrounds, and heating and ventilation ducts
  • Rotating body expands the rod, which locks tightly into place
  • Convenient quick support rod secures building materials to keep your hands free
  • Two-man Job by One Person: This multifunctional hand tool is capable of multiple use scenarios, such as floor, brick wall, window, deck, porch installation. Which can save effort and time of your family. Choose gifts for your father and husband!
  • Labor-saving arm Jack Specifications: Capacity: up to 120 kg/265lbs. Operating range (IN): 0.2-3.9. Standard base (IN): 3.9 x 2.4 x 0.2. Support panel (IN): 2.7 x 2.3.x 0.1. Weight: 2.29lb.
  • Portable Labor-saving Arm Jack: Only 2.29 pounds, Super lightweight and portable for home and outdoor use. Made of stainless steel, the base has strong bearing capacity and no need to worry about damage.
  • Easy to Use: Free up and down, with strong elasticity, it is easy to control the height of every millimeter. Hold the handle tightly to raise the height and press the steel platen lightly to reduce the height.
  • Multifunctional Hand Lifting Tool Jack: Made of Hardened stainless steel/aluminum, this labor-saving arm jack can withstand up to 260 lb / 120 kg weight, The height can be raised by 5-100mm, Suitable for Door Panel, Board, Wall.

More Info

2 Pack fremr Labor Saving Arm, Viking Lifting Arm, Hand Tool Jack, Viking Cabinet Lifts, Board Lifting Cabinet Jack, Drywall Lift Board Lifter, Wall Tile Height Adjuster, UP to 264 LB/PCS

Search only fremr brand name
2 Pack fremr Labor Saving Arm, Viking Lifting Arm, Hand Tool Jack, Viking Cabinet Lifts, Board Lifting Cabinet Jack, Drywall Lift Board Lifter, Wall Tile Height Adjuster, UP to 264 LB/PCS

Current price: 69.99 USD


Check price and availability


  • FINEST MATERIAL:the clamp is machined from aerospace-grade aluminum. The handle is made of durable, impact-resistant ABS polymer, making it comfort on your shouders.
  • WIDE APPLICABLE RANGE: automatically adjust to accommodate sheet thickness up to 15/16 inches up to 200 pounds and up to 2 pieces of sheets at the same time. Suitable for carrying 4x8 plywood, drywall, wall board, windows, doors, skylights, solar panels, roof trusses, framing materials, stone slabs and more.
  • EASY TO USE : carry plywwod, drywall, sheet metal, and more with one hand. Easy to go up and down stairs and through doors. Labor saving and helping to alleviate back problems.
  • Safe and in good balance - The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism
  • Tool Free Assembly - Easy assemble, no tool required. Quick tool-free setup and disassembly for storage
  • Easy to Operate - This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them
  • Versatile Function - Features a 16 reach for flat ceilings and over 19 reach on walls/angled ceilings; the cradle rotates 360, tilts 65 forward/backward and 10 side-to-side for use on both flat and sloped ceilings
  • Load Capacity - This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs
  • Adjustable Telescopic Arm and Panel Rotation-The telescopic arm can be adjusted which is perfect for installing sheets. And it is a rubber telescopic arm that doesn't scratch your panel. This drywall lift can tilt 60° forward or backward and rotate 360°. It is widely used in flat and inclined ceilings.
  • Safe and in good balance-The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cable of the Panel Hoist.
  • Allows one person working alone-This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them.
  • Tool free assembly--Easy assemble, no tool required. Quick tool-free setup and dis-assembly for storage.
  • 150LBS 11' Drywall Lift-Heavy duty steel construction, Max Load Capacity: 150 LBS
  • 【 Multifunctional Board Lifter Cabinet Jack】 Wall Tile Leveler Device, The height can be easily adjusted by holding the handle. Durable, strong elasticity and large bearing capacity. The thicker supports are more load-bearing. Small size, light weight, Tile Leveling System easy to carry.
  • 【Handheld Design】Thanks to the unique structure of the handheld jack, all of these and more can be done easily with controlled accuracy.Can replace multiple "traditional" tools, improve productivity, save time and money.
  • Easy to Use】The installation of doors, windows and cabinets are obvious uses, but the construction of floors and porches, decks and frames are also great opportunities to use this ingenious tool.
  • 【Heavy Duty】 It’s made of rugged structure, highest quality components. With a lifting capacity of up to 330 lb / 120 kg, the range of applications is virtually unlimited.And It can be raised by 20cm/11.81 inches in height.
  • 【Innovative Design】labor saving arm jack An innovative universal tool for lifting, pressing, precise fastening and control. The anti-decoupling design prevents slippage by restricting the plate.
  • 2 identical supports included.Load Capacity(each) - 150 lbs
  • Quick release lever
  • Textured rubber pads for gripping
  • Fully articulated ends
  • Reaches 5-to 12-feet; Action lever for secure pressure
  • Recommended – Boards are left lightly butted as specified by industry
  • Accurate - Allows the fixer check the board is perfectly aligned before fixing
  • Flexible - Allows one person efficiently board ceilings
  • Effort - Take the neck ache out of holding up plasterboard sheets
  • Quick - Speeds up boarding a ceiling by 50% (2 in a set)
  • FREE YOUR HANDS: Quick support pole secures building materials to keep your hands free by offering you a third hand. If you ever wished you had an extra hand when you were working alone, this install pole rod will help you a lot.
  • ADDITIONAL FEATURES: Spring-loaded pins that pop out into holes in the outer pole can lock the height. A white calibration line helps realign the pins with the holes if the rod is rotated. Pinch-prevent design protects your hand when extending the rod. 2 pairs of pads (3.8 x 2.8 in and 5.2 x 3.2 in) can be replaced as needed.
  • ADJUSTABLE SUPPORT TOOL: The adjustable height and textured rubber face help hold the rod tight for various purposes. Long Rod expands from 49.2 to 114.2 in (125 to 290 cm); Short Rod expands from 23.6 to 45.3 in (60 to 115 cm). The handle is used for minute adjustment.
  • DURABLE EXTENSION POLE: The extendable rod has GS certification. The weight capacity is 154 lb (70 kg). The stem rod is made of high-density metal and the handle is cast in premium aluminum. Non-slip TPR pads and an additional pair of bigger PVC pads meet various working conditions.
  • MULTIPLE USAGE: This 3rd hand support system is well made and handy for lots of woodworking projects such as a brace, jack, or support for drywall, crown moldings, cabinets hand, dust barriers and so on. It can also be used for a cargo bar.
  • Expands from 81 inches to 108 inches
  • Adjustable rubber face holds the rod tight
  • Ideal for drywall, crown moldings, cabinets, dust barriers, tub surrounds, and heating and ventilation ducts
  • Rotating body expands the rod, which locks tightly into place
  • Convenient quick support rod secures building materials to keep your hands free
  • Two-man Job by One Person: This multifunctional hand tool is capable of multiple use scenarios, such as floor, brick wall, window, deck, porch installation. Which can save effort and time of your family. Choose gifts for your father and husband!
  • Labor-saving arm Jack Specifications: Capacity: up to 120 kg/265lbs. Operating range (IN): 0.2-3.9. Standard base (IN): 3.9 x 2.4 x 0.2. Support panel (IN): 2.7 x 2.3.x 0.1. Weight: 2.29lb.
  • Portable Labor-saving Arm Jack: Only 2.29 pounds, Super lightweight and portable for home and outdoor use. Made of stainless steel, the base has strong bearing capacity and no need to worry about damage.
  • Easy to Use: Free up and down, with strong elasticity, it is easy to control the height of every millimeter. Hold the handle tightly to raise the height and press the steel platen lightly to reduce the height.
  • Multifunctional Hand Lifting Tool Jack: Made of Hardened stainless steel/aluminum, this labor-saving arm jack can withstand up to 260 lb / 120 kg weight, The height can be raised by 5-100mm, Suitable for Door Panel, Board, Wall.
  • 【Strong and durable】The supporting plate, pressing plate, and base are all thickened. So it can be durable. Moreover, the compression spring is made of high-toughness silico-manganese steel, which has sufficient durability and elasticity. Besides, the lifting cabinet jack has a top limited design, which makes it more stable and reliable in terms of load and balance during work.
  • 【Multiple application functions】The lifting cabinet jack has a wide range of use. In addition to assisting in the installation of tiles, doors, and windows, and glass, the help for the installation of cabinets, floors, and frames is also obvious. (Any problem of using or quality, kindly feel free to contact us, we will try our best to help you).
  • 【Flexible design】This drywall lifting arm is handheld, which can be easily completed during use, the lifting height can be adjusted freely, and the precision is controllable. Place the drywall on the loadbearing sheet and hold the handle to raise it. If you need to lower, you only need to press the lock piece to make the slider lower. It can replace multiple traditional tools, improve productivity, save time and money.
  • 【Superior lifting capacity】The guide rail, pressure plate, and Viking boom base are all thickened, the maximum lifting weight of the Viking lift arm reaches 264 pounds per piece, and the maximum lifting height can reach 7.7 inches.
  • 【Parameters of labor saving arm】 This Cabinet Tool Jack is small in size, light in weight, and very convenient to carry. Weight: 1.65 lbs/piece. Lifting height: 0.15-7.7 inches. Base: 3.6x3.3 inches. Height: 11.8 inches.

More Info

1    2    3    4    5    6    7    8    9    10