Exclusive Drill Bit Extensions. Reviews August, 2021, page 2

DEWALT Drill Bit Holder Extension, Impact Ready, 6-Inch (DWA6HLDFT)

More from Tools & Home Improvement
Search only Dewalt brand name
DEWALT Drill Bit Holder Extension, Impact Ready, 6-Inch (DWA6HLDFT)

Current price: 10.98 USD

Saving: $7.01 (39%)


Check price and availability


Height: 8.75 Inches

Length: 1.87 Inches

Width: 0.5 Inches

Weight: 0.14 Pounds

  • Slim 11mm profile for fastening and drilling in tight spaces
  • Accepts 1" screw driving bits and all 1/4" hex-shank accessories for drilling and driving
  • Magnetism for Fastener retention
  • Locking mechanism for accessory retention

More Info

IRWIN Drill Bit Holder Extension, Impact Rated, Quick Change, 1/4-Inch Shank, 12-Inch Length (1869517)

More from Tools & Home Improvement
Search only IRWIN brand name
IRWIN Drill Bit Holder Extension, Impact Rated, Quick Change, 1/4-Inch Shank, 12-Inch Length (1869517)

Current price: 13.76 USD

Saving: $5.08 (27%)


Check price and availability


Height: 14 Inches

Length: 0.63 Inches

Width: 1.75 Inches

Weight: 0.41 Pounds

  • Slim 11mm profile for fastening and drilling in tight spaces
  • Accepts 1" screw driving bits and all 1/4" hex-shank accessories for drilling and driving
  • Magnetism for Fastener retention
  • Locking mechanism for accessory retention
  • Black oxide finish resists corrosion and increases life of bit
  • Black oxide finish resists corrosion and increases life of extension
  • Large chuck withstands higher torque demands of impact drills
  • Patented jaw design is compatible with all 1/4" hex shank accessories including insert bits
  • Built for maximum durability and long life with impact drivers

More Info

Fulton 10 inch Long Forstner Bit Extension for Adding Over 8" of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)

More from Tools & Home Improvement
Search only Fulton brand name
Fulton 10 inch Long Forstner Bit Extension for Adding Over 8

Current price: 16.99 USD

Saving: $3.00 (15%)


Check price and availability


  • Slim 11mm profile for fastening and drilling in tight spaces
  • Accepts 1" screw driving bits and all 1/4" hex-shank accessories for drilling and driving
  • Magnetism for Fastener retention
  • Locking mechanism for accessory retention
  • Black oxide finish resists corrosion and increases life of bit
  • Black oxide finish resists corrosion and increases life of extension
  • Large chuck withstands higher torque demands of impact drills
  • Patented jaw design is compatible with all 1/4" hex shank accessories including insert bits
  • Built for maximum durability and long life with impact drivers
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.

More Info

DEWALT Drill Bit Holder Extension, Impact Ready, 12-Inch (DWA12HLDFT)

More from Tools & Home Improvement
Search only Dewalt brand name
DEWALT Drill Bit Holder Extension, Impact Ready, 12-Inch (DWA12HLDFT)

Current price: 14.98 USD

Saving: $7.01 (32%)


Check price and availability


Height: 14.75 Inches

Length: 1.87 Inches

Width: 0.5 Inches

Weight: 0.25 Pounds

  • Slim 11mm profile for fastening and drilling in tight spaces
  • Accepts 1" screw driving bits and all 1/4" hex-shank accessories for drilling and driving
  • Magnetism for Fastener retention
  • Locking mechanism for accessory retention
  • Black oxide finish resists corrosion and increases life of bit
  • Black oxide finish resists corrosion and increases life of extension
  • Large chuck withstands higher torque demands of impact drills
  • Patented jaw design is compatible with all 1/4" hex shank accessories including insert bits
  • Built for maximum durability and long life with impact drivers
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • Slim 11mm profile for fastening and drilling in tight spaces
  • Accepts 1" screw driving bits and all 1/4" hex-shank accessories for drilling and driving
  • Magnetism for Fastener retention
  • Locking mechanism for accessory retention

More Info

DEWALT DW2055 Magnetic Bit Tip Holder (3 PACK)

More from Tools & Home Improvement
Search only Dewalt brand name
DEWALT DW2055 Magnetic Bit Tip Holder (3 PACK)

Current price: 13.54 USD


Check price and availability


  • Slim 11mm profile for fastening and drilling in tight spaces
  • Accepts 1" screw driving bits and all 1/4" hex-shank accessories for drilling and driving
  • Magnetism for Fastener retention
  • Locking mechanism for accessory retention
  • Black oxide finish resists corrosion and increases life of bit
  • Black oxide finish resists corrosion and increases life of extension
  • Large chuck withstands higher torque demands of impact drills
  • Patented jaw design is compatible with all 1/4" hex shank accessories including insert bits
  • Built for maximum durability and long life with impact drivers
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • Slim 11mm profile for fastening and drilling in tight spaces
  • Accepts 1" screw driving bits and all 1/4" hex-shank accessories for drilling and driving
  • Magnetism for Fastener retention
  • Locking mechanism for accessory retention
  • 3 Pack
  • Self-retracting guide also eliminates wobbling and slipping
  • Fits up to size 10 screws
  • Magnetic bit holder for driving screws
  • Self-retracting guide sleeve protects fingers and holds screws in place

More Info

MAEXUS Flexible Drill Bit Extension, Explore Flexible Extensions for Drills, Flexible Shaft Extension Bits, Magnetic Hex Soft Shaft Flexible Screwdriver Kit for Father's Day Fine Finish (2 Pcs)

More from Tools & Home Improvement
Search only MAEXUS brand name
MAEXUS Flexible Drill Bit Extension, Explore Flexible Extensions for Drills, Flexible Shaft Extension Bits, Magnetic Hex Soft Shaft Flexible Screwdriver Kit for Father's Day Fine Finish (2 Pcs)

Current price: 6.99 USD


Check price and availability


Height: 1 Inches

Length: 11.5 Inches

Width: 1 Inches

Weight: 0.2 Pounds

  • Slim 11mm profile for fastening and drilling in tight spaces
  • Accepts 1" screw driving bits and all 1/4" hex-shank accessories for drilling and driving
  • Magnetism for Fastener retention
  • Locking mechanism for accessory retention
  • Black oxide finish resists corrosion and increases life of bit
  • Black oxide finish resists corrosion and increases life of extension
  • Large chuck withstands higher torque demands of impact drills
  • Patented jaw design is compatible with all 1/4" hex shank accessories including insert bits
  • Built for maximum durability and long life with impact drivers
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • Slim 11mm profile for fastening and drilling in tight spaces
  • Accepts 1" screw driving bits and all 1/4" hex-shank accessories for drilling and driving
  • Magnetism for Fastener retention
  • Locking mechanism for accessory retention
  • 3 Pack
  • Self-retracting guide also eliminates wobbling and slipping
  • Fits up to size 10 screws
  • Magnetic bit holder for driving screws
  • Self-retracting guide sleeve protects fingers and holds screws in place
  • 🔗 Length: 11.6 inch (29.5 cm). Please keep the size of the tool to match your screw, connection hex shank drill site size is 1/4" = 0.25 inch (6.35 mm). If you have any Doubt or product Damaged, pls click "ask seller'' from the order details.
  • 🔗 2 Pcs suit that is easy to replace. The Flexible Drill Bit Extension is compatible with a small wrench, cordless screwdriver, pneumatic screwdriver, torque drill, and electric screwdriver. Suitable for many drill and repair scenarios.
  • 🔗 The inner shaft has a wide rotation range and is stable in mass. As the shaft rotates inside, the flexible black sleeve protects your hand from damage and completes your job perfectly.
  • 🔗 It can bend, twist and spin at many different angles. It can touch a small place and work flexibly in various crevices instead of your hand. Let this flexible drill bit extension help you solve more problems quickly.
  • 🔗 MAEXUS Exquisite craftsmanship, high quality plastic and metal materials combine to make it a good helper for repair and installation.

More Info

Irwin 88702 6" Extension Bit.

More from Tools & Home Improvement
Search only Irwin Tools brand name
Irwin 88702 6

Current price: 5.99 USD

Saving: $0.92 (13%)


Check price and availability


Height: 0.5 Inches

Length: 51 Inches

Width: 1.9 Inches

Weight: 0.18 Pounds

  • Slim 11mm profile for fastening and drilling in tight spaces
  • Accepts 1" screw driving bits and all 1/4" hex-shank accessories for drilling and driving
  • Magnetism for Fastener retention
  • Locking mechanism for accessory retention
  • Black oxide finish resists corrosion and increases life of bit
  • Black oxide finish resists corrosion and increases life of extension
  • Large chuck withstands higher torque demands of impact drills
  • Patented jaw design is compatible with all 1/4" hex shank accessories including insert bits
  • Built for maximum durability and long life with impact drivers
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • Slim 11mm profile for fastening and drilling in tight spaces
  • Accepts 1" screw driving bits and all 1/4" hex-shank accessories for drilling and driving
  • Magnetism for Fastener retention
  • Locking mechanism for accessory retention
  • 3 Pack
  • Self-retracting guide also eliminates wobbling and slipping
  • Fits up to size 10 screws
  • Magnetic bit holder for driving screws
  • Self-retracting guide sleeve protects fingers and holds screws in place
  • 🔗 Length: 11.6 inch (29.5 cm). Please keep the size of the tool to match your screw, connection hex shank drill site size is 1/4" = 0.25 inch (6.35 mm). If you have any Doubt or product Damaged, pls click "ask seller'' from the order details.
  • 🔗 2 Pcs suit that is easy to replace. The Flexible Drill Bit Extension is compatible with a small wrench, cordless screwdriver, pneumatic screwdriver, torque drill, and electric screwdriver. Suitable for many drill and repair scenarios.
  • 🔗 The inner shaft has a wide rotation range and is stable in mass. As the shaft rotates inside, the flexible black sleeve protects your hand from damage and completes your job perfectly.
  • 🔗 It can bend, twist and spin at many different angles. It can touch a small place and work flexibly in various crevices instead of your hand. Let this flexible drill bit extension help you solve more problems quickly.
  • 🔗 MAEXUS Exquisite craftsmanship, high quality plastic and metal materials combine to make it a good helper for repair and installation.
  • Shank Size: 1/4
  • Length: 6"

More Info

IIT 64510 Magnetic Bit Extensions Set, 3-Piece

More from Tools & Home Improvement
Search only IIT brand name
IIT 64510 Magnetic Bit Extensions Set, 3-Piece

Current price: 4.99 USD


Check price and availability


Height: 1 Inches

Length: 1 Inches

Width: 1 Inches

Weight: 0.01 Pounds

  • Slim 11mm profile for fastening and drilling in tight spaces
  • Accepts 1" screw driving bits and all 1/4" hex-shank accessories for drilling and driving
  • Magnetism for Fastener retention
  • Locking mechanism for accessory retention
  • Black oxide finish resists corrosion and increases life of bit
  • Black oxide finish resists corrosion and increases life of extension
  • Large chuck withstands higher torque demands of impact drills
  • Patented jaw design is compatible with all 1/4" hex shank accessories including insert bits
  • Built for maximum durability and long life with impact drivers
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • Slim 11mm profile for fastening and drilling in tight spaces
  • Accepts 1" screw driving bits and all 1/4" hex-shank accessories for drilling and driving
  • Magnetism for Fastener retention
  • Locking mechanism for accessory retention
  • 3 Pack
  • Self-retracting guide also eliminates wobbling and slipping
  • Fits up to size 10 screws
  • Magnetic bit holder for driving screws
  • Self-retracting guide sleeve protects fingers and holds screws in place
  • 🔗 Length: 11.6 inch (29.5 cm). Please keep the size of the tool to match your screw, connection hex shank drill site size is 1/4" = 0.25 inch (6.35 mm). If you have any Doubt or product Damaged, pls click "ask seller'' from the order details.
  • 🔗 2 Pcs suit that is easy to replace. The Flexible Drill Bit Extension is compatible with a small wrench, cordless screwdriver, pneumatic screwdriver, torque drill, and electric screwdriver. Suitable for many drill and repair scenarios.
  • 🔗 The inner shaft has a wide rotation range and is stable in mass. As the shaft rotates inside, the flexible black sleeve protects your hand from damage and completes your job perfectly.
  • 🔗 It can bend, twist and spin at many different angles. It can touch a small place and work flexibly in various crevices instead of your hand. Let this flexible drill bit extension help you solve more problems quickly.
  • 🔗 MAEXUS Exquisite craftsmanship, high quality plastic and metal materials combine to make it a good helper for repair and installation.
  • Shank Size: 1/4
  • Length: 6"
  • Accepts any 1/4 bit
  • Also useful in hand-held drivers
  • Hex shank chucks firmly into drills
  • For hard to reach screws and nuts
  • Magnetized ends holds bits securely

More Info

Titan 16018 Quick Release Extension Bit Holder, 18-Inch

More from Tools & Home Improvement
Search only Titan Tools brand name
Titan 16018 Quick Release Extension Bit Holder, 18-Inch

Current price: 17.99 USD


Check price and availability


Height: 20.1 Inches

Length: 0.2 Inches

Width: 2 Inches

Weight: 0.45 Pounds

  • Slim 11mm profile for fastening and drilling in tight spaces
  • Accepts 1" screw driving bits and all 1/4" hex-shank accessories for drilling and driving
  • Magnetism for Fastener retention
  • Locking mechanism for accessory retention
  • Black oxide finish resists corrosion and increases life of bit
  • Black oxide finish resists corrosion and increases life of extension
  • Large chuck withstands higher torque demands of impact drills
  • Patented jaw design is compatible with all 1/4" hex shank accessories including insert bits
  • Built for maximum durability and long life with impact drivers
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • Slim 11mm profile for fastening and drilling in tight spaces
  • Accepts 1" screw driving bits and all 1/4" hex-shank accessories for drilling and driving
  • Magnetism for Fastener retention
  • Locking mechanism for accessory retention
  • 3 Pack
  • Self-retracting guide also eliminates wobbling and slipping
  • Fits up to size 10 screws
  • Magnetic bit holder for driving screws
  • Self-retracting guide sleeve protects fingers and holds screws in place
  • 🔗 Length: 11.6 inch (29.5 cm). Please keep the size of the tool to match your screw, connection hex shank drill site size is 1/4" = 0.25 inch (6.35 mm). If you have any Doubt or product Damaged, pls click "ask seller'' from the order details.
  • 🔗 2 Pcs suit that is easy to replace. The Flexible Drill Bit Extension is compatible with a small wrench, cordless screwdriver, pneumatic screwdriver, torque drill, and electric screwdriver. Suitable for many drill and repair scenarios.
  • 🔗 The inner shaft has a wide rotation range and is stable in mass. As the shaft rotates inside, the flexible black sleeve protects your hand from damage and completes your job perfectly.
  • 🔗 It can bend, twist and spin at many different angles. It can touch a small place and work flexibly in various crevices instead of your hand. Let this flexible drill bit extension help you solve more problems quickly.
  • 🔗 MAEXUS Exquisite craftsmanship, high quality plastic and metal materials combine to make it a good helper for repair and installation.
  • Shank Size: 1/4
  • Length: 6"
  • Accepts any 1/4 bit
  • Also useful in hand-held drivers
  • Hex shank chucks firmly into drills
  • For hard to reach screws and nuts
  • Magnetized ends holds bits securely
  • Auto locking drive
  • 18" length helps reduce back strain
  • Locking, magnetic, low profile, quick release bit holder
  • Outer sleeve allows for holding and directing the tool without any discomfort
  • Extra-long extended driver for hard to reach areas

More Info

Flexible Drill Bit Extension and Universal Socket Wrench Tool Set, 105° Right Angle Drill Attachment, 1/4 3/8 1/2" Universal Socket Adapter Set, Screwdriver Bit Kit

More from Tools & Home Improvement
Search only FOUUA brand name
Flexible Drill Bit Extension and Universal Socket Wrench Tool Set, 105° Right Angle Drill Attachment, 1/4 3/8 1/2

Current price: 19.99 USD


Check price and availability


  • Slim 11mm profile for fastening and drilling in tight spaces
  • Accepts 1" screw driving bits and all 1/4" hex-shank accessories for drilling and driving
  • Magnetism for Fastener retention
  • Locking mechanism for accessory retention
  • Black oxide finish resists corrosion and increases life of bit
  • Black oxide finish resists corrosion and increases life of extension
  • Large chuck withstands higher torque demands of impact drills
  • Patented jaw design is compatible with all 1/4" hex shank accessories including insert bits
  • Built for maximum durability and long life with impact drivers
  • The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
  • Slim 11mm profile for fastening and drilling in tight spaces
  • Accepts 1" screw driving bits and all 1/4" hex-shank accessories for drilling and driving
  • Magnetism for Fastener retention
  • Locking mechanism for accessory retention
  • 3 Pack
  • Self-retracting guide also eliminates wobbling and slipping
  • Fits up to size 10 screws
  • Magnetic bit holder for driving screws
  • Self-retracting guide sleeve protects fingers and holds screws in place
  • 🔗 Length: 11.6 inch (29.5 cm). Please keep the size of the tool to match your screw, connection hex shank drill site size is 1/4" = 0.25 inch (6.35 mm). If you have any Doubt or product Damaged, pls click "ask seller'' from the order details.
  • 🔗 2 Pcs suit that is easy to replace. The Flexible Drill Bit Extension is compatible with a small wrench, cordless screwdriver, pneumatic screwdriver, torque drill, and electric screwdriver. Suitable for many drill and repair scenarios.
  • 🔗 The inner shaft has a wide rotation range and is stable in mass. As the shaft rotates inside, the flexible black sleeve protects your hand from damage and completes your job perfectly.
  • 🔗 It can bend, twist and spin at many different angles. It can touch a small place and work flexibly in various crevices instead of your hand. Let this flexible drill bit extension help you solve more problems quickly.
  • 🔗 MAEXUS Exquisite craftsmanship, high quality plastic and metal materials combine to make it a good helper for repair and installation.
  • Shank Size: 1/4
  • Length: 6"
  • Accepts any 1/4 bit
  • Also useful in hand-held drivers
  • Hex shank chucks firmly into drills
  • For hard to reach screws and nuts
  • Magnetized ends holds bits securely
  • Auto locking drive
  • 18" length helps reduce back strain
  • Locking, magnetic, low profile, quick release bit holder
  • Outer sleeve allows for holding and directing the tool without any discomfort
  • Extra-long extended driver for hard to reach areas
  • 【Bendable Flexible Drill Extension】11.7" bendable drill bit extension can twisted and rotated at many different angles. It can be drilled into a small space, in a variety of gaps, rather than your hand, flexible installation work. Let our flexible drill bit extension tool help you solve more problems quickly.
  • 【Multifunction Socket Adapter】1/4 3/8 1/2" square nut hex shank driver drill bit used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool. It is a good accessory for conversion.
  • 【Universal Socket Wrench】Unique design of this universal socket can automatically adjust to any size or shape, suitable for standard 1/4 to 3/4 inches and metric 7mm to 19mm screws, nuts, and blots, meeting all your needs.
  • 【105° Right Angle Drill Extension】It come with a 105° right angle drill extension bit can be connected to the drill, rechargeable drill or manual wrench, extending their reach to inaccessible stenosis , twisting screws, nut and more.
  • 【Complete Collocation】Package included 1Pcs bendable drill bit extension, 3Pcs 1/4 3/8 1/2" universal socket adapter set, 1Pcs universal socket wrench, 1Pcs 105° right angle drill extension, 10Pcs screwdriver bit set.

More Info

1    2    3    4    5    6    7    8    9    10