Best Dial Calipers. Reviews June, 2021

Anytime Tools Dial Caliper 6" / 150mm DUAL Reading Scale METRIC SAE Standard INCH MM

Search only Anytime Tools brand name
Anytime Tools Dial Caliper 6

Current price: 36 USD


Check price and availability


Height: 3.5 Inches

Length: 1.1 Inches

Width: 9.8 Inches

  • Covered, stainless steel rack.
  • Raised sliding surface prevents wear and defacement of graduations.
  • Inside, outside, step and depth measurement.
  • Hardened stainless steel throughout.
  • Dial face reads in both inch (black) and metric (red).

More Info

HFS (Tm) 0-6" ; 4 Way DIAL Caliper .001" Shock Proof New ; Plastic CASE

Search only Hardware Factory Store brand name
HFS (Tm) 0-6

Current price: 20.99 USD


Check price and availability


  • Covered, stainless steel rack.
  • Raised sliding surface prevents wear and defacement of graduations.
  • Inside, outside, step and depth measurement.
  • Hardened stainless steel throughout.
  • Dial face reads in both inch (black) and metric (red).
  • [Measurement Method]: 4 way measurements: inside, outside, depth, and step;
  • [Note]: Each dial caliper has been fully calibrated before ready to sell.
  • [Measure Range]: 0-6 inch; Accuracy: ±0.001"; Division: 0.001"; Repeatability: 0.0005"
  • [Featured Double Shock Proof Design]: Fine polished solid hardened stainless steel supports smooth sliding and accurate result
  • [Application]: Higher quality lower price stainless steel dial caliper; Home DIY and professional use are both highly recommended

More Info

Anytime Tools Premium Dial Caliper 0-6"/0.001" Precision Double Shock Proof Solid Hardened Stainless Steel

Search only Anytime Tools brand name
Anytime Tools Premium Dial Caliper 0-6

Current price: 36.95 USD


Check price and availability


  • Covered, stainless steel rack.
  • Raised sliding surface prevents wear and defacement of graduations.
  • Inside, outside, step and depth measurement.
  • Hardened stainless steel throughout.
  • Dial face reads in both inch (black) and metric (red).
  • [Measurement Method]: 4 way measurements: inside, outside, depth, and step;
  • [Note]: Each dial caliper has been fully calibrated before ready to sell.
  • [Measure Range]: 0-6 inch; Accuracy: ±0.001"; Division: 0.001"; Repeatability: 0.0005"
  • [Featured Double Shock Proof Design]: Fine polished solid hardened stainless steel supports smooth sliding and accurate result
  • [Application]: Higher quality lower price stainless steel dial caliper; Home DIY and professional use are both highly recommended
  • Padded case included
  • Solid Hardened Stainless Steel
  • Measure External, Internal and depth
  • Precision Dial 0.001" Graduation / 0.1" Per revolution. Range: 0-6".
  • Super high precision gears. Double Shock Proof Design. Zero Parallel Tolerance. Smooth operation.

More Info

Mitutoyo 505-742 Dial Caliper, D6"TX, 0.1" per Rev, 0-6" Range, 0.001" Accuracy

Search only Mitutoyo brand name
Mitutoyo 505-742 Dial Caliper, D6

Current price: 98.7 USD

Saving: $26.30 (21%)


Check price and availability


Weight: 1 Pounds

  • Covered, stainless steel rack.
  • Raised sliding surface prevents wear and defacement of graduations.
  • Inside, outside, step and depth measurement.
  • Hardened stainless steel throughout.
  • Dial face reads in both inch (black) and metric (red).
  • [Measurement Method]: 4 way measurements: inside, outside, depth, and step;
  • [Note]: Each dial caliper has been fully calibrated before ready to sell.
  • [Measure Range]: 0-6 inch; Accuracy: ±0.001"; Division: 0.001"; Repeatability: 0.0005"
  • [Featured Double Shock Proof Design]: Fine polished solid hardened stainless steel supports smooth sliding and accurate result
  • [Application]: Higher quality lower price stainless steel dial caliper; Home DIY and professional use are both highly recommended
  • Padded case included
  • Solid Hardened Stainless Steel
  • Measure External, Internal and depth
  • Precision Dial 0.001" Graduation / 0.1" Per revolution. Range: 0-6".
  • Super high precision gears. Double Shock Proof Design. Zero Parallel Tolerance. Smooth operation.
  • Can measure OD, ID, depth and steps.
  • New face for improved readability.
  • Lock screw for dial bezel and for holding the sliding jaw position
  • Improved finish on sliding surgaces for longevity.
  • New designed dial movement for ultra smooth sliding and high shock protection

More Info

Fowler Full Warranty Stainless Steel Shockproof Dial Caliper, 52-008-706-0, 0-6" Measuring Range, 0.001" Graduation Interval, Face Color White

Search only Fowler brand name
Fowler Full Warranty Stainless Steel Shockproof Dial Caliper, 52-008-706-0, 0-6

Current price: 50.59 USD


Check price and availability


Height: 1 Inches

Length: 9.6 Inches

Width: 3.4 Inches

Weight: 0.75 Pounds

Warranty: 1 yr warranty on material and workmanship

  • Covered, stainless steel rack.
  • Raised sliding surface prevents wear and defacement of graduations.
  • Inside, outside, step and depth measurement.
  • Hardened stainless steel throughout.
  • Dial face reads in both inch (black) and metric (red).
  • [Measurement Method]: 4 way measurements: inside, outside, depth, and step;
  • [Note]: Each dial caliper has been fully calibrated before ready to sell.
  • [Measure Range]: 0-6 inch; Accuracy: ±0.001"; Division: 0.001"; Repeatability: 0.0005"
  • [Featured Double Shock Proof Design]: Fine polished solid hardened stainless steel supports smooth sliding and accurate result
  • [Application]: Higher quality lower price stainless steel dial caliper; Home DIY and professional use are both highly recommended
  • Padded case included
  • Solid Hardened Stainless Steel
  • Measure External, Internal and depth
  • Precision Dial 0.001" Graduation / 0.1" Per revolution. Range: 0-6".
  • Super high precision gears. Double Shock Proof Design. Zero Parallel Tolerance. Smooth operation.
  • Can measure OD, ID, depth and steps.
  • New face for improved readability.
  • Lock screw for dial bezel and for holding the sliding jaw position
  • Improved finish on sliding surgaces for longevity.
  • New designed dial movement for ultra smooth sliding and high shock protection
  • Covered rack to prevent dirt and debris from clogging the gear, and to help prevent measurement errors
  • Knurled lock screw holds the sliding jaw in position to help ensure a consistent measurement
  • Hardened stainless steel construction for corrosion resistance and long life, shockproof anti-backlash control with heavy-duty spring for accuracy
  • Dial graduations of 0.001" with one revolution equivalent to 0.100"
  • Full 1 year warranty offered by Fowler High Precision, an American company

More Info

Starrett Dial Caliper Measuring Tool 3202-6, Hardened Stainless Steel Metal, 6 Inch Range, 0.001" Graduation, Measure Inside Outside Dimensions and Depth, Carry Case Included, White

Search only Starrett brand name
Starrett Dial Caliper Measuring Tool 3202-6, Hardened Stainless Steel Metal, 6 Inch Range, 0.001

Current price: 101 USD


Check price and availability


Height: 1.4 Inches

Length: 10.2 Inches

Width: 3.8 Inches

Weight: 0.000625 Pounds

  • Covered, stainless steel rack.
  • Raised sliding surface prevents wear and defacement of graduations.
  • Inside, outside, step and depth measurement.
  • Hardened stainless steel throughout.
  • Dial face reads in both inch (black) and metric (red).
  • [Measurement Method]: 4 way measurements: inside, outside, depth, and step;
  • [Note]: Each dial caliper has been fully calibrated before ready to sell.
  • [Measure Range]: 0-6 inch; Accuracy: ±0.001"; Division: 0.001"; Repeatability: 0.0005"
  • [Featured Double Shock Proof Design]: Fine polished solid hardened stainless steel supports smooth sliding and accurate result
  • [Application]: Higher quality lower price stainless steel dial caliper; Home DIY and professional use are both highly recommended
  • Padded case included
  • Solid Hardened Stainless Steel
  • Measure External, Internal and depth
  • Precision Dial 0.001" Graduation / 0.1" Per revolution. Range: 0-6".
  • Super high precision gears. Double Shock Proof Design. Zero Parallel Tolerance. Smooth operation.
  • Can measure OD, ID, depth and steps.
  • New face for improved readability.
  • Lock screw for dial bezel and for holding the sliding jaw position
  • Improved finish on sliding surgaces for longevity.
  • New designed dial movement for ultra smooth sliding and high shock protection
  • Covered rack to prevent dirt and debris from clogging the gear, and to help prevent measurement errors
  • Knurled lock screw holds the sliding jaw in position to help ensure a consistent measurement
  • Hardened stainless steel construction for corrosion resistance and long life, shockproof anti-backlash control with heavy-duty spring for accuracy
  • Dial graduations of 0.001" with one revolution equivalent to 0.100"
  • Full 1 year warranty offered by Fowler High Precision, an American company
  • EASY OPERATION: It has a thumb-operated fine adjustment roll, knife-edge contacts, and positive spring-loaded, double pinion, anti-backlash control
  • VERSATILE: The dial caliper is the most versatile precision hand tool on the market and has been the first choice of metal working professionals for decades
  • FEATURES: This model offers sharp, clear dial graduations, black graduations on satin finished bar, lock screws for sliding jaw, and dial bezel which is adjustable
  • RANGE: This series features a 0 – 6 inch range, 0.001 inch dial graduation, and one revolution equivalent to 0.100 inch. It has a hardened stainless steel bar, measuring surfaces, rack, gears and depth rod
  • FAST MEASURING: The Starrett Dial Caliper provides precise measurement of outside dimensions (OD) inside dimensions (ID), and depth. Use for metalworking, woodworking, automotive, and machining applications

More Info

iGaging 6" Fractional & Decimal Inch Combination Dial Caliper

Search only iGaging brand name
iGaging 6

Current price: 33.95 USD


Check price and availability


Weight: 0.74 Pounds

  • Covered, stainless steel rack.
  • Raised sliding surface prevents wear and defacement of graduations.
  • Inside, outside, step and depth measurement.
  • Hardened stainless steel throughout.
  • Dial face reads in both inch (black) and metric (red).
  • [Measurement Method]: 4 way measurements: inside, outside, depth, and step;
  • [Note]: Each dial caliper has been fully calibrated before ready to sell.
  • [Measure Range]: 0-6 inch; Accuracy: ±0.001"; Division: 0.001"; Repeatability: 0.0005"
  • [Featured Double Shock Proof Design]: Fine polished solid hardened stainless steel supports smooth sliding and accurate result
  • [Application]: Higher quality lower price stainless steel dial caliper; Home DIY and professional use are both highly recommended
  • Padded case included
  • Solid Hardened Stainless Steel
  • Measure External, Internal and depth
  • Precision Dial 0.001" Graduation / 0.1" Per revolution. Range: 0-6".
  • Super high precision gears. Double Shock Proof Design. Zero Parallel Tolerance. Smooth operation.
  • Can measure OD, ID, depth and steps.
  • New face for improved readability.
  • Lock screw for dial bezel and for holding the sliding jaw position
  • Improved finish on sliding surgaces for longevity.
  • New designed dial movement for ultra smooth sliding and high shock protection
  • Covered rack to prevent dirt and debris from clogging the gear, and to help prevent measurement errors
  • Knurled lock screw holds the sliding jaw in position to help ensure a consistent measurement
  • Hardened stainless steel construction for corrosion resistance and long life, shockproof anti-backlash control with heavy-duty spring for accuracy
  • Dial graduations of 0.001" with one revolution equivalent to 0.100"
  • Full 1 year warranty offered by Fowler High Precision, an American company
  • EASY OPERATION: It has a thumb-operated fine adjustment roll, knife-edge contacts, and positive spring-loaded, double pinion, anti-backlash control
  • VERSATILE: The dial caliper is the most versatile precision hand tool on the market and has been the first choice of metal working professionals for decades
  • FEATURES: This model offers sharp, clear dial graduations, black graduations on satin finished bar, lock screws for sliding jaw, and dial bezel which is adjustable
  • RANGE: This series features a 0 – 6 inch range, 0.001 inch dial graduation, and one revolution equivalent to 0.100 inch. It has a hardened stainless steel bar, measuring surfaces, rack, gears and depth rod
  • FAST MEASURING: The Starrett Dial Caliper provides precise measurement of outside dimensions (OD) inside dimensions (ID), and depth. Use for metalworking, woodworking, automotive, and machining applications
  • 4-Way Measuring Readout - Accuracy: +/- 0.001" per 6 inches
  • Dual Scales: Inch and Fractional Displays

More Info

Dial Caliper- Stainless Steel and Shock Proof Tool With Plastic Carry Case, 0- 6 Inch Measuring Range For Accurate Measurements by Stalwart

Search only Stalwart brand name
Dial Caliper- Stainless Steel and Shock Proof Tool With Plastic Carry Case, 0- 6 Inch Measuring Range For Accurate Measurements by Stalwart

Current price: 26.52 USD


Check price and availability


Height: 1 Inches

Length: 9.75 Inches

Width: 3.75 Inches

  • Covered, stainless steel rack.
  • Raised sliding surface prevents wear and defacement of graduations.
  • Inside, outside, step and depth measurement.
  • Hardened stainless steel throughout.
  • Dial face reads in both inch (black) and metric (red).
  • [Measurement Method]: 4 way measurements: inside, outside, depth, and step;
  • [Note]: Each dial caliper has been fully calibrated before ready to sell.
  • [Measure Range]: 0-6 inch; Accuracy: ±0.001"; Division: 0.001"; Repeatability: 0.0005"
  • [Featured Double Shock Proof Design]: Fine polished solid hardened stainless steel supports smooth sliding and accurate result
  • [Application]: Higher quality lower price stainless steel dial caliper; Home DIY and professional use are both highly recommended
  • Padded case included
  • Solid Hardened Stainless Steel
  • Measure External, Internal and depth
  • Precision Dial 0.001" Graduation / 0.1" Per revolution. Range: 0-6".
  • Super high precision gears. Double Shock Proof Design. Zero Parallel Tolerance. Smooth operation.
  • Can measure OD, ID, depth and steps.
  • New face for improved readability.
  • Lock screw for dial bezel and for holding the sliding jaw position
  • Improved finish on sliding surgaces for longevity.
  • New designed dial movement for ultra smooth sliding and high shock protection
  • Covered rack to prevent dirt and debris from clogging the gear, and to help prevent measurement errors
  • Knurled lock screw holds the sliding jaw in position to help ensure a consistent measurement
  • Hardened stainless steel construction for corrosion resistance and long life, shockproof anti-backlash control with heavy-duty spring for accuracy
  • Dial graduations of 0.001" with one revolution equivalent to 0.100"
  • Full 1 year warranty offered by Fowler High Precision, an American company
  • EASY OPERATION: It has a thumb-operated fine adjustment roll, knife-edge contacts, and positive spring-loaded, double pinion, anti-backlash control
  • VERSATILE: The dial caliper is the most versatile precision hand tool on the market and has been the first choice of metal working professionals for decades
  • FEATURES: This model offers sharp, clear dial graduations, black graduations on satin finished bar, lock screws for sliding jaw, and dial bezel which is adjustable
  • RANGE: This series features a 0 – 6 inch range, 0.001 inch dial graduation, and one revolution equivalent to 0.100 inch. It has a hardened stainless steel bar, measuring surfaces, rack, gears and depth rod
  • FAST MEASURING: The Starrett Dial Caliper provides precise measurement of outside dimensions (OD) inside dimensions (ID), and depth. Use for metalworking, woodworking, automotive, and machining applications
  • 4-Way Measuring Readout - Accuracy: +/- 0.001" per 6 inches
  • Dual Scales: Inch and Fractional Displays
  • SATISFACTION GUARANTEED –Stalwart is committed to providing consumers with the absolute best price and value on our entire line of products. NOTE: This is an exclusive product of Stalwart and ONLY calipers by Stalwart are GUARANTEED to be genuine
  • PRODUCT DETAILS – Measurement range 0-6 inches. Measures inside, outside, depth and step. Made of stainless steel and includes a plastic carry case.
  • MOBILE- The stainless-steel caliper is lightweight and easy to carry anywhere. Great for home or work projects.
  • DURABLE CONSTRUCTION- Made of stainless steel this dial caliper will hold up during tough working situations. The included plastic carry case protects your caliper and makes it readily available for on the go projects.
  • PRECISE MEASURING- The Stalwart shockproof stainless-steel dial caliper has dial graduations of 0.001” and.001” for accuracy. Additionally, the easy to use thumb-roll mechanism and position lock allow for sure adjustment and added precision.

More Info

Accusize Industrial Tools 0-6" x 0.001" (Range x Resolution) Dial Caliper, Black Face Red Needle, Stainless Steel in Fitted Box, P920-B216

Search only Accusize Industrial Tools brand name
Accusize Industrial Tools 0-6

Current price: 36.8 USD


Check price and availability


Height: 9.842519675 Inches

Length: 3.543307083 Inches

Width: 1.968503935 Inches

Weight: 1.05 Kilograms

  • Covered, stainless steel rack.
  • Raised sliding surface prevents wear and defacement of graduations.
  • Inside, outside, step and depth measurement.
  • Hardened stainless steel throughout.
  • Dial face reads in both inch (black) and metric (red).
  • [Measurement Method]: 4 way measurements: inside, outside, depth, and step;
  • [Note]: Each dial caliper has been fully calibrated before ready to sell.
  • [Measure Range]: 0-6 inch; Accuracy: ±0.001"; Division: 0.001"; Repeatability: 0.0005"
  • [Featured Double Shock Proof Design]: Fine polished solid hardened stainless steel supports smooth sliding and accurate result
  • [Application]: Higher quality lower price stainless steel dial caliper; Home DIY and professional use are both highly recommended
  • Padded case included
  • Solid Hardened Stainless Steel
  • Measure External, Internal and depth
  • Precision Dial 0.001" Graduation / 0.1" Per revolution. Range: 0-6".
  • Super high precision gears. Double Shock Proof Design. Zero Parallel Tolerance. Smooth operation.
  • Can measure OD, ID, depth and steps.
  • New face for improved readability.
  • Lock screw for dial bezel and for holding the sliding jaw position
  • Improved finish on sliding surgaces for longevity.
  • New designed dial movement for ultra smooth sliding and high shock protection
  • Covered rack to prevent dirt and debris from clogging the gear, and to help prevent measurement errors
  • Knurled lock screw holds the sliding jaw in position to help ensure a consistent measurement
  • Hardened stainless steel construction for corrosion resistance and long life, shockproof anti-backlash control with heavy-duty spring for accuracy
  • Dial graduations of 0.001" with one revolution equivalent to 0.100"
  • Full 1 year warranty offered by Fowler High Precision, an American company
  • EASY OPERATION: It has a thumb-operated fine adjustment roll, knife-edge contacts, and positive spring-loaded, double pinion, anti-backlash control
  • VERSATILE: The dial caliper is the most versatile precision hand tool on the market and has been the first choice of metal working professionals for decades
  • FEATURES: This model offers sharp, clear dial graduations, black graduations on satin finished bar, lock screws for sliding jaw, and dial bezel which is adjustable
  • RANGE: This series features a 0 – 6 inch range, 0.001 inch dial graduation, and one revolution equivalent to 0.100 inch. It has a hardened stainless steel bar, measuring surfaces, rack, gears and depth rod
  • FAST MEASURING: The Starrett Dial Caliper provides precise measurement of outside dimensions (OD) inside dimensions (ID), and depth. Use for metalworking, woodworking, automotive, and machining applications
  • 4-Way Measuring Readout - Accuracy: +/- 0.001" per 6 inches
  • Dual Scales: Inch and Fractional Displays
  • SATISFACTION GUARANTEED –Stalwart is committed to providing consumers with the absolute best price and value on our entire line of products. NOTE: This is an exclusive product of Stalwart and ONLY calipers by Stalwart are GUARANTEED to be genuine
  • PRODUCT DETAILS – Measurement range 0-6 inches. Measures inside, outside, depth and step. Made of stainless steel and includes a plastic carry case.
  • MOBILE- The stainless-steel caliper is lightweight and easy to carry anywhere. Great for home or work projects.
  • DURABLE CONSTRUCTION- Made of stainless steel this dial caliper will hold up during tough working situations. The included plastic carry case protects your caliper and makes it readily available for on the go projects.
  • PRECISE MEASURING- The Stalwart shockproof stainless-steel dial caliper has dial graduations of 0.001” and.001” for accuracy. Additionally, the easy to use thumb-roll mechanism and position lock allow for sure adjustment and added precision.
  • Satin chrome finish, crisp engraved graduations, jaws with lapped measuring face
  • Inside, outside, and depth measurements
  • Graduation 0.001 per revolution and covered rack
  • Direct reading to .001'' in large clear dial/.-100
  • Black dial face, Range: 0-6'', Resolution: 0.001''

More Info

6" SAE Dial Calipers Accurate to 0.001" per 6" Hardened Stainless Steel for Inside, Outside, Step and Depth Measurements SAEDC-6

Search only Taylor Toolworks brand name
6

Current price: 22.99 USD


Check price and availability


  • Covered, stainless steel rack.
  • Raised sliding surface prevents wear and defacement of graduations.
  • Inside, outside, step and depth measurement.
  • Hardened stainless steel throughout.
  • Dial face reads in both inch (black) and metric (red).
  • [Measurement Method]: 4 way measurements: inside, outside, depth, and step;
  • [Note]: Each dial caliper has been fully calibrated before ready to sell.
  • [Measure Range]: 0-6 inch; Accuracy: ±0.001"; Division: 0.001"; Repeatability: 0.0005"
  • [Featured Double Shock Proof Design]: Fine polished solid hardened stainless steel supports smooth sliding and accurate result
  • [Application]: Higher quality lower price stainless steel dial caliper; Home DIY and professional use are both highly recommended
  • Padded case included
  • Solid Hardened Stainless Steel
  • Measure External, Internal and depth
  • Precision Dial 0.001" Graduation / 0.1" Per revolution. Range: 0-6".
  • Super high precision gears. Double Shock Proof Design. Zero Parallel Tolerance. Smooth operation.
  • Can measure OD, ID, depth and steps.
  • New face for improved readability.
  • Lock screw for dial bezel and for holding the sliding jaw position
  • Improved finish on sliding surgaces for longevity.
  • New designed dial movement for ultra smooth sliding and high shock protection
  • Covered rack to prevent dirt and debris from clogging the gear, and to help prevent measurement errors
  • Knurled lock screw holds the sliding jaw in position to help ensure a consistent measurement
  • Hardened stainless steel construction for corrosion resistance and long life, shockproof anti-backlash control with heavy-duty spring for accuracy
  • Dial graduations of 0.001" with one revolution equivalent to 0.100"
  • Full 1 year warranty offered by Fowler High Precision, an American company
  • EASY OPERATION: It has a thumb-operated fine adjustment roll, knife-edge contacts, and positive spring-loaded, double pinion, anti-backlash control
  • VERSATILE: The dial caliper is the most versatile precision hand tool on the market and has been the first choice of metal working professionals for decades
  • FEATURES: This model offers sharp, clear dial graduations, black graduations on satin finished bar, lock screws for sliding jaw, and dial bezel which is adjustable
  • RANGE: This series features a 0 – 6 inch range, 0.001 inch dial graduation, and one revolution equivalent to 0.100 inch. It has a hardened stainless steel bar, measuring surfaces, rack, gears and depth rod
  • FAST MEASURING: The Starrett Dial Caliper provides precise measurement of outside dimensions (OD) inside dimensions (ID), and depth. Use for metalworking, woodworking, automotive, and machining applications
  • 4-Way Measuring Readout - Accuracy: +/- 0.001" per 6 inches
  • Dual Scales: Inch and Fractional Displays
  • SATISFACTION GUARANTEED –Stalwart is committed to providing consumers with the absolute best price and value on our entire line of products. NOTE: This is an exclusive product of Stalwart and ONLY calipers by Stalwart are GUARANTEED to be genuine
  • PRODUCT DETAILS – Measurement range 0-6 inches. Measures inside, outside, depth and step. Made of stainless steel and includes a plastic carry case.
  • MOBILE- The stainless-steel caliper is lightweight and easy to carry anywhere. Great for home or work projects.
  • DURABLE CONSTRUCTION- Made of stainless steel this dial caliper will hold up during tough working situations. The included plastic carry case protects your caliper and makes it readily available for on the go projects.
  • PRECISE MEASURING- The Stalwart shockproof stainless-steel dial caliper has dial graduations of 0.001” and.001” for accuracy. Additionally, the easy to use thumb-roll mechanism and position lock allow for sure adjustment and added precision.
  • Satin chrome finish, crisp engraved graduations, jaws with lapped measuring face
  • Inside, outside, and depth measurements
  • Graduation 0.001 per revolution and covered rack
  • Direct reading to .001'' in large clear dial/.-100
  • Black dial face, Range: 0-6'', Resolution: 0.001''
  • Hardened stainless steel construction with high quality finish
  • Accuracy: +/- 0.001" per 6"
  • Dial resolution: 0.001"
  • Can be used for inside, outside, step and depth measurements
  • 6" dial calipers

More Info

1    2    3    4    5    6    7    8    9    10