Best Chemical Anchors. Reviews June, 2021

MKT Polyester Liquid ROC 300 Capsule Anchor, 1/2" Diameter x 6-1/4" Length, 3/4" Hole Diameter (Box of 10)

Search only MKT brand name
MKT Polyester Liquid ROC 300 Capsule Anchor, 1/2

Current price: 18.49 USD


Check price and availability


  • 24 months shelf life
  • Concerns: do not use overhead
  • Sand and aggregate mixture is closest to natural concrete
  • No expensive dispensing tools
  • Pre-measured adhesive of polyester resin base, quartz sand and benzoyl peroxide hardener

More Info

Extreme Max 3006.6791 BoatTector Vinyl-Coated River Anchor - 40 lbs.

Search only Extreme Max brand name
Extreme Max 3006.6791 BoatTector Vinyl-Coated River Anchor - 40 lbs.

Current price: 89.19 USD


Check price and availability


  • 24 months shelf life
  • Concerns: do not use overhead
  • Sand and aggregate mixture is closest to natural concrete
  • No expensive dispensing tools
  • Pre-measured adhesive of polyester resin base, quartz sand and benzoyl peroxide hardener
  • UV-resistant vinyl coating protects boat surfaces
  • Works on hard bottom surfaces , muddy or rocky bottom surface, and grass/weeds
  • For use in lakes / rivers with fast currents and drift areas, holds in high
  • Designed to use a combination of weight and flukes for hold
  • 40 lb. river anchor

More Info

Sika Anchorfix-2, super strength anchoring adhesive, Two component anchor system for threaded bars in uncracked concrete, 10.1 fl. Oz

Search only SIKA brand name
Sika Anchorfix-2, super strength anchoring adhesive, Two component anchor system for threaded bars in uncracked concrete, 10.1 fl. Oz

Current price: 24.98 USD


Check price and availability


Height: 10.4 Inches

Length: 1.9 Inches

Width: 1.9 Inches

Weight: 1.2 Pounds

Warranty: SIKA warrants this product for one year from date of installation to be free from manufacturing defects and to meet the technical properties on the current Product Data

  • 24 months shelf life
  • Concerns: do not use overhead
  • Sand and aggregate mixture is closest to natural concrete
  • No expensive dispensing tools
  • Pre-measured adhesive of polyester resin base, quartz sand and benzoyl peroxide hardener
  • UV-resistant vinyl coating protects boat surfaces
  • Works on hard bottom surfaces , muddy or rocky bottom surface, and grass/weeds
  • For use in lakes / rivers with fast currents and drift areas, holds in high
  • Designed to use a combination of weight and flukes for hold
  • 40 lb. river anchor
  • APPLICATION: Applied with standard guns and by experienced professionals
  • PERFORMANCE: High load capacity. Drinkable water certified. Anchoring without expansion forces.
  • USES: Fast curing anchoring adhesive for rebars / reinforcing steel, threaded rods, bolts and special fastening systems.
  • SUPPORTS: It can be used on concrete solid, masonry, steel, hard natural stone, solid rock.
  • Sika AnchorFix-2 is a two-Component, Solvent- and Styrene-Free, Modified-Acrylic Anchoring Adhesive.

More Info

WETNFIX (20 Discs) - Fixing Wall Anchors Fast! Ideal for Loose Wall fixtures Such as Curtain Rails, Toilet roll Holders. Ideal for Drywall and Masonry.

Search only WETNFIX brand name
WETNFIX (20 Discs) - Fixing Wall Anchors Fast! Ideal for Loose Wall fixtures Such as Curtain Rails, Toilet roll Holders. Ideal for Drywall and Masonry.

Current price: 9.95 USD


Check price and availability


Height: 2.362204722 Inches

Length: 2.362204722 Inches

Width: 0.0393700787 Inches

Weight: 0.0440924524 Pounds

  • 24 months shelf life
  • Concerns: do not use overhead
  • Sand and aggregate mixture is closest to natural concrete
  • No expensive dispensing tools
  • Pre-measured adhesive of polyester resin base, quartz sand and benzoyl peroxide hardener
  • UV-resistant vinyl coating protects boat surfaces
  • Works on hard bottom surfaces , muddy or rocky bottom surface, and grass/weeds
  • For use in lakes / rivers with fast currents and drift areas, holds in high
  • Designed to use a combination of weight and flukes for hold
  • 40 lb. river anchor
  • APPLICATION: Applied with standard guns and by experienced professionals
  • PERFORMANCE: High load capacity. Drinkable water certified. Anchoring without expansion forces.
  • USES: Fast curing anchoring adhesive for rebars / reinforcing steel, threaded rods, bolts and special fastening systems.
  • SUPPORTS: It can be used on concrete solid, masonry, steel, hard natural stone, solid rock.
  • Sika AnchorFix-2 is a two-Component, Solvent- and Styrene-Free, Modified-Acrylic Anchoring Adhesive.
  • If you have a wall in your home or office, you need WETNFIX in your tool box.
  • Suitable for most materials, including masonry, wood, ceramics and plasterboard
  • Fast, easy to use and sets in 3 minutes
  • It is ideal for fittings such as curtain rails, shelves, toilet roll holders, towel rails, hooks etc.
  • Specifically created to solve the commonest DIY problem - securing wall plugs/anchors in weak crumbly masonry or oversized holes or fittings which have come loose with repeated use.

More Info

MG Chemicals - 9200-50ML 9200 Structural Epoxy Adhesive 45 milliliters Dual Pneumatic Dispenser

Search only MG Chemicals brand name
MG Chemicals - 9200-50ML 9200 Structural Epoxy Adhesive 45 milliliters Dual Pneumatic Dispenser

Current price: 13.95 USD


Check price and availability


Height: 3 Inches

Length: 8 Inches

Width: 2 Inches

Weight: 0.220462262 Pounds

Warranty: [email protected]

  • 24 months shelf life
  • Concerns: do not use overhead
  • Sand and aggregate mixture is closest to natural concrete
  • No expensive dispensing tools
  • Pre-measured adhesive of polyester resin base, quartz sand and benzoyl peroxide hardener
  • UV-resistant vinyl coating protects boat surfaces
  • Works on hard bottom surfaces , muddy or rocky bottom surface, and grass/weeds
  • For use in lakes / rivers with fast currents and drift areas, holds in high
  • Designed to use a combination of weight and flukes for hold
  • 40 lb. river anchor
  • APPLICATION: Applied with standard guns and by experienced professionals
  • PERFORMANCE: High load capacity. Drinkable water certified. Anchoring without expansion forces.
  • USES: Fast curing anchoring adhesive for rebars / reinforcing steel, threaded rods, bolts and special fastening systems.
  • SUPPORTS: It can be used on concrete solid, masonry, steel, hard natural stone, solid rock.
  • Sika AnchorFix-2 is a two-Component, Solvent- and Styrene-Free, Modified-Acrylic Anchoring Adhesive.
  • If you have a wall in your home or office, you need WETNFIX in your tool box.
  • Suitable for most materials, including masonry, wood, ceramics and plasterboard
  • Fast, easy to use and sets in 3 minutes
  • It is ideal for fittings such as curtain rails, shelves, toilet roll holders, towel rails, hooks etc.
  • Specifically created to solve the commonest DIY problem - securing wall plugs/anchors in weak crumbly masonry or oversized holes or fittings which have come loose with repeated use.
  • Bonds dissimilar materials
  • Very strong adhesion
  • Working life: 30 minutes, cure time: 48 hours
  • 1:1 mix ratio
  • Toughened, smooth, thixotropic paste

More Info

ANCHORSEAL Classic Log & Lumber End Sealer - Water Based Wax Emulsion, Prevents up to 90% of End Checking on Cut Ends of Hardwood & Softwood … (1 Gallon)

Search only ANCHORSEAL brand name
ANCHORSEAL Classic Log & Lumber End Sealer - Water Based Wax Emulsion, Prevents up to 90% of End Checking on Cut Ends of Hardwood & Softwood … (1 Gallon)

Current price: 42 USD


Check price and availability


Height: 9 Inches

Length: 7 Inches

Width: 7 Inches

Weight: 9 Pounds

  • 24 months shelf life
  • Concerns: do not use overhead
  • Sand and aggregate mixture is closest to natural concrete
  • No expensive dispensing tools
  • Pre-measured adhesive of polyester resin base, quartz sand and benzoyl peroxide hardener
  • UV-resistant vinyl coating protects boat surfaces
  • Works on hard bottom surfaces , muddy or rocky bottom surface, and grass/weeds
  • For use in lakes / rivers with fast currents and drift areas, holds in high
  • Designed to use a combination of weight and flukes for hold
  • 40 lb. river anchor
  • APPLICATION: Applied with standard guns and by experienced professionals
  • PERFORMANCE: High load capacity. Drinkable water certified. Anchoring without expansion forces.
  • USES: Fast curing anchoring adhesive for rebars / reinforcing steel, threaded rods, bolts and special fastening systems.
  • SUPPORTS: It can be used on concrete solid, masonry, steel, hard natural stone, solid rock.
  • Sika AnchorFix-2 is a two-Component, Solvent- and Styrene-Free, Modified-Acrylic Anchoring Adhesive.
  • If you have a wall in your home or office, you need WETNFIX in your tool box.
  • Suitable for most materials, including masonry, wood, ceramics and plasterboard
  • Fast, easy to use and sets in 3 minutes
  • It is ideal for fittings such as curtain rails, shelves, toilet roll holders, towel rails, hooks etc.
  • Specifically created to solve the commonest DIY problem - securing wall plugs/anchors in weak crumbly masonry or oversized holes or fittings which have come loose with repeated use.
  • Bonds dissimilar materials
  • Very strong adhesion
  • Working life: 30 minutes, cure time: 48 hours
  • 1:1 mix ratio
  • Toughened, smooth, thixotropic paste
  • For hardwood & softwood logs & lumber, Debarked logs, Log exports, Wood-turning blanks, Log "cookies
  • ANCHORSEAL has been the #1 log and lumber end grain sealer since 1980
  • Water-based, Non-hazardous, No solvents, soap & water clean-up
  • Reduces blue stain and sapstain in logs
  • Prevents up to 90% of end checking (drying splits), improves yield with less waste

More Info

BoltHold Asphalt Anchors and Grout kit AK-4

Search only AAG Asphalt Anchors Group brand name
BoltHold Asphalt Anchors and Grout kit AK-4

Current price: 55 USD


Check price and availability


Height: 1.5 Inches

Length: 6 Inches

Width: 1.5 Inches

Weight: 5 Pounds

  • 24 months shelf life
  • Concerns: do not use overhead
  • Sand and aggregate mixture is closest to natural concrete
  • No expensive dispensing tools
  • Pre-measured adhesive of polyester resin base, quartz sand and benzoyl peroxide hardener
  • UV-resistant vinyl coating protects boat surfaces
  • Works on hard bottom surfaces , muddy or rocky bottom surface, and grass/weeds
  • For use in lakes / rivers with fast currents and drift areas, holds in high
  • Designed to use a combination of weight and flukes for hold
  • 40 lb. river anchor
  • APPLICATION: Applied with standard guns and by experienced professionals
  • PERFORMANCE: High load capacity. Drinkable water certified. Anchoring without expansion forces.
  • USES: Fast curing anchoring adhesive for rebars / reinforcing steel, threaded rods, bolts and special fastening systems.
  • SUPPORTS: It can be used on concrete solid, masonry, steel, hard natural stone, solid rock.
  • Sika AnchorFix-2 is a two-Component, Solvent- and Styrene-Free, Modified-Acrylic Anchoring Adhesive.
  • If you have a wall in your home or office, you need WETNFIX in your tool box.
  • Suitable for most materials, including masonry, wood, ceramics and plasterboard
  • Fast, easy to use and sets in 3 minutes
  • It is ideal for fittings such as curtain rails, shelves, toilet roll holders, towel rails, hooks etc.
  • Specifically created to solve the commonest DIY problem - securing wall plugs/anchors in weak crumbly masonry or oversized holes or fittings which have come loose with repeated use.
  • Bonds dissimilar materials
  • Very strong adhesion
  • Working life: 30 minutes, cure time: 48 hours
  • 1:1 mix ratio
  • Toughened, smooth, thixotropic paste
  • For hardwood & softwood logs & lumber, Debarked logs, Log exports, Wood-turning blanks, Log "cookies
  • ANCHORSEAL has been the #1 log and lumber end grain sealer since 1980
  • Water-based, Non-hazardous, No solvents, soap & water clean-up
  • Reduces blue stain and sapstain in logs
  • Prevents up to 90% of end checking (drying splits), improves yield with less waste
  • Bike Racks -Fabric-Sided Structures -Blast Deflectors (airports) -Sound Barriers -Fences -Signage -Carports -Lean-to Sheds -Shelving -Shopping cart corrals -Street Lights -Traffic Signs -Railings and Guardrails -Bus Shelters -Equipment Platforms -Static Discharge poles -Bleachers -Oil Drums tiedown -Solar Panels -Outdoor Furniture -Steps -Cable troughs
  • Benefits: Installed anchor is flush with ground. After use, can be left in ground without danger of pedestrian tripping.
  • Installation: The installation requires drilling a 7/8” (22 mm) hole, 6” (150 mm) deep, into the asphalt and the gravel below it. The hole is filled with EPX2 grout and the anchor is dropped in. The anchor is ready for use in 15 minutes (depending on grout and ground temperatures).
  • The kit contains 4 SP10 and 2 bags of EPX2 grout
  • The SP10-38 anchors are pull-rated for 1,500 lb.

More Info

HILTI Hit-Re 500 (500 Ml) Injectable Mortar Pure Epoxy (Anchor Bolt Chemical)

Search only HILTI brand name
HILTI Hit-Re 500 (500 Ml) Injectable Mortar Pure Epoxy (Anchor Bolt Chemical)

Current price: 59.99 USD


Check price and availability


  • 24 months shelf life
  • Concerns: do not use overhead
  • Sand and aggregate mixture is closest to natural concrete
  • No expensive dispensing tools
  • Pre-measured adhesive of polyester resin base, quartz sand and benzoyl peroxide hardener
  • UV-resistant vinyl coating protects boat surfaces
  • Works on hard bottom surfaces , muddy or rocky bottom surface, and grass/weeds
  • For use in lakes / rivers with fast currents and drift areas, holds in high
  • Designed to use a combination of weight and flukes for hold
  • 40 lb. river anchor
  • APPLICATION: Applied with standard guns and by experienced professionals
  • PERFORMANCE: High load capacity. Drinkable water certified. Anchoring without expansion forces.
  • USES: Fast curing anchoring adhesive for rebars / reinforcing steel, threaded rods, bolts and special fastening systems.
  • SUPPORTS: It can be used on concrete solid, masonry, steel, hard natural stone, solid rock.
  • Sika AnchorFix-2 is a two-Component, Solvent- and Styrene-Free, Modified-Acrylic Anchoring Adhesive.
  • If you have a wall in your home or office, you need WETNFIX in your tool box.
  • Suitable for most materials, including masonry, wood, ceramics and plasterboard
  • Fast, easy to use and sets in 3 minutes
  • It is ideal for fittings such as curtain rails, shelves, toilet roll holders, towel rails, hooks etc.
  • Specifically created to solve the commonest DIY problem - securing wall plugs/anchors in weak crumbly masonry or oversized holes or fittings which have come loose with repeated use.
  • Bonds dissimilar materials
  • Very strong adhesion
  • Working life: 30 minutes, cure time: 48 hours
  • 1:1 mix ratio
  • Toughened, smooth, thixotropic paste
  • For hardwood & softwood logs & lumber, Debarked logs, Log exports, Wood-turning blanks, Log "cookies
  • ANCHORSEAL has been the #1 log and lumber end grain sealer since 1980
  • Water-based, Non-hazardous, No solvents, soap & water clean-up
  • Reduces blue stain and sapstain in logs
  • Prevents up to 90% of end checking (drying splits), improves yield with less waste
  • Bike Racks -Fabric-Sided Structures -Blast Deflectors (airports) -Sound Barriers -Fences -Signage -Carports -Lean-to Sheds -Shelving -Shopping cart corrals -Street Lights -Traffic Signs -Railings and Guardrails -Bus Shelters -Equipment Platforms -Static Discharge poles -Bleachers -Oil Drums tiedown -Solar Panels -Outdoor Furniture -Steps -Cable troughs
  • Benefits: Installed anchor is flush with ground. After use, can be left in ground without danger of pedestrian tripping.
  • Installation: The installation requires drilling a 7/8” (22 mm) hole, 6” (150 mm) deep, into the asphalt and the gravel below it. The hole is filled with EPX2 grout and the anchor is dropped in. The anchor is ready for use in 15 minutes (depending on grout and ground temperatures).
  • The kit contains 4 SP10 and 2 bags of EPX2 grout
  • The SP10-38 anchors are pull-rated for 1,500 lb.
  • Especially suitable for large-diameter elements and/or deep embedment depths
  • Suitable for anchoring in diamond-cored holes
  • Convenient and reliable design using the Hilti PROFIS Rebar PC application
  • High performance and technical superiority as per international approvals
  • Works like cast-in with post-installed rebars

More Info

BoltHold SP10-38 Asphalt Anchor, 1,500 lbs. Load Rated, zinc Plated Steel, 6-Pack

Search only BoltHold brand name
BoltHold SP10-38 Asphalt Anchor, 1,500 lbs. Load Rated, zinc Plated Steel, 6-Pack

Current price: 52.5 USD


Check price and availability


Height: 1.5 Inches

Length: 6 Inches

Width: 1.5 Inches

  • 24 months shelf life
  • Concerns: do not use overhead
  • Sand and aggregate mixture is closest to natural concrete
  • No expensive dispensing tools
  • Pre-measured adhesive of polyester resin base, quartz sand and benzoyl peroxide hardener
  • UV-resistant vinyl coating protects boat surfaces
  • Works on hard bottom surfaces , muddy or rocky bottom surface, and grass/weeds
  • For use in lakes / rivers with fast currents and drift areas, holds in high
  • Designed to use a combination of weight and flukes for hold
  • 40 lb. river anchor
  • APPLICATION: Applied with standard guns and by experienced professionals
  • PERFORMANCE: High load capacity. Drinkable water certified. Anchoring without expansion forces.
  • USES: Fast curing anchoring adhesive for rebars / reinforcing steel, threaded rods, bolts and special fastening systems.
  • SUPPORTS: It can be used on concrete solid, masonry, steel, hard natural stone, solid rock.
  • Sika AnchorFix-2 is a two-Component, Solvent- and Styrene-Free, Modified-Acrylic Anchoring Adhesive.
  • If you have a wall in your home or office, you need WETNFIX in your tool box.
  • Suitable for most materials, including masonry, wood, ceramics and plasterboard
  • Fast, easy to use and sets in 3 minutes
  • It is ideal for fittings such as curtain rails, shelves, toilet roll holders, towel rails, hooks etc.
  • Specifically created to solve the commonest DIY problem - securing wall plugs/anchors in weak crumbly masonry or oversized holes or fittings which have come loose with repeated use.
  • Bonds dissimilar materials
  • Very strong adhesion
  • Working life: 30 minutes, cure time: 48 hours
  • 1:1 mix ratio
  • Toughened, smooth, thixotropic paste
  • For hardwood & softwood logs & lumber, Debarked logs, Log exports, Wood-turning blanks, Log "cookies
  • ANCHORSEAL has been the #1 log and lumber end grain sealer since 1980
  • Water-based, Non-hazardous, No solvents, soap & water clean-up
  • Reduces blue stain and sapstain in logs
  • Prevents up to 90% of end checking (drying splits), improves yield with less waste
  • Bike Racks -Fabric-Sided Structures -Blast Deflectors (airports) -Sound Barriers -Fences -Signage -Carports -Lean-to Sheds -Shelving -Shopping cart corrals -Street Lights -Traffic Signs -Railings and Guardrails -Bus Shelters -Equipment Platforms -Static Discharge poles -Bleachers -Oil Drums tiedown -Solar Panels -Outdoor Furniture -Steps -Cable troughs
  • Benefits: Installed anchor is flush with ground. After use, can be left in ground without danger of pedestrian tripping.
  • Installation: The installation requires drilling a 7/8” (22 mm) hole, 6” (150 mm) deep, into the asphalt and the gravel below it. The hole is filled with EPX2 grout and the anchor is dropped in. The anchor is ready for use in 15 minutes (depending on grout and ground temperatures).
  • The kit contains 4 SP10 and 2 bags of EPX2 grout
  • The SP10-38 anchors are pull-rated for 1,500 lb.
  • Especially suitable for large-diameter elements and/or deep embedment depths
  • Suitable for anchoring in diamond-cored holes
  • Convenient and reliable design using the Hilti PROFIS Rebar PC application
  • High performance and technical superiority as per international approvals
  • Works like cast-in with post-installed rebars

More Info

BoltHold SP18-716 Asphalt Anchor, 2,500 lbs. Pull, 12" L, zinc Plated Steel, 6-Pack

Search only BoltHold brand name
BoltHold SP18-716 Asphalt Anchor, 2,500 lbs. Pull, 12

Current price: 63 USD


Check price and availability


  • 24 months shelf life
  • Concerns: do not use overhead
  • Sand and aggregate mixture is closest to natural concrete
  • No expensive dispensing tools
  • Pre-measured adhesive of polyester resin base, quartz sand and benzoyl peroxide hardener
  • UV-resistant vinyl coating protects boat surfaces
  • Works on hard bottom surfaces , muddy or rocky bottom surface, and grass/weeds
  • For use in lakes / rivers with fast currents and drift areas, holds in high
  • Designed to use a combination of weight and flukes for hold
  • 40 lb. river anchor
  • APPLICATION: Applied with standard guns and by experienced professionals
  • PERFORMANCE: High load capacity. Drinkable water certified. Anchoring without expansion forces.
  • USES: Fast curing anchoring adhesive for rebars / reinforcing steel, threaded rods, bolts and special fastening systems.
  • SUPPORTS: It can be used on concrete solid, masonry, steel, hard natural stone, solid rock.
  • Sika AnchorFix-2 is a two-Component, Solvent- and Styrene-Free, Modified-Acrylic Anchoring Adhesive.
  • If you have a wall in your home or office, you need WETNFIX in your tool box.
  • Suitable for most materials, including masonry, wood, ceramics and plasterboard
  • Fast, easy to use and sets in 3 minutes
  • It is ideal for fittings such as curtain rails, shelves, toilet roll holders, towel rails, hooks etc.
  • Specifically created to solve the commonest DIY problem - securing wall plugs/anchors in weak crumbly masonry or oversized holes or fittings which have come loose with repeated use.
  • Bonds dissimilar materials
  • Very strong adhesion
  • Working life: 30 minutes, cure time: 48 hours
  • 1:1 mix ratio
  • Toughened, smooth, thixotropic paste
  • For hardwood & softwood logs & lumber, Debarked logs, Log exports, Wood-turning blanks, Log "cookies
  • ANCHORSEAL has been the #1 log and lumber end grain sealer since 1980
  • Water-based, Non-hazardous, No solvents, soap & water clean-up
  • Reduces blue stain and sapstain in logs
  • Prevents up to 90% of end checking (drying splits), improves yield with less waste
  • Bike Racks -Fabric-Sided Structures -Blast Deflectors (airports) -Sound Barriers -Fences -Signage -Carports -Lean-to Sheds -Shelving -Shopping cart corrals -Street Lights -Traffic Signs -Railings and Guardrails -Bus Shelters -Equipment Platforms -Static Discharge poles -Bleachers -Oil Drums tiedown -Solar Panels -Outdoor Furniture -Steps -Cable troughs
  • Benefits: Installed anchor is flush with ground. After use, can be left in ground without danger of pedestrian tripping.
  • Installation: The installation requires drilling a 7/8” (22 mm) hole, 6” (150 mm) deep, into the asphalt and the gravel below it. The hole is filled with EPX2 grout and the anchor is dropped in. The anchor is ready for use in 15 minutes (depending on grout and ground temperatures).
  • The kit contains 4 SP10 and 2 bags of EPX2 grout
  • The SP10-38 anchors are pull-rated for 1,500 lb.
  • Especially suitable for large-diameter elements and/or deep embedment depths
  • Suitable for anchoring in diamond-cored holes
  • Convenient and reliable design using the Hilti PROFIS Rebar PC application
  • High performance and technical superiority as per international approvals
  • Works like cast-in with post-installed rebars
  • Pull Rated at 2,500 lbs.

More Info

1    2    3    4    5    6    7    8    9    10