Best Chamfer End Mills. Reviews June, 2021

Spetool 90 Degree Carbide V Bits with Tiain Coated 4 Flutes, Chamfer End Mill for Caving V Groove and Sign

Search only SpeTool brand name
Spetool 90 Degree Carbide V Bits with Tiain Coated 4 Flutes, Chamfer End Mill for Caving V Groove and Sign

Current price: 14.99 USD


Check price and availability


  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length.

More Info

Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.58" Cutting Length, 1/2" Cutting Diameter, 3" Length (Pack of 1)

Search only Bassett brand name
Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.58

Current price: 30.23 USD

Saving: $1.74 (5%)


Check price and availability


Height: 0.699999999286 Inches

Length: 0.599999999388 Inches

Width: 3.399999996532 Inches

Weight: 0.3 Pounds

  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length.
  • Made in the USA
  • Applicable for steel, cast iron, nonferrous material
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

More Info

JERRAY Chamfering Mill, Carbide with TiAlN Coated, 4 Flutes, 60 Degree V-Groove Chamfer End, 1/4" Diameter

Search only JERRAY brand name
JERRAY Chamfering Mill, Carbide with TiAlN Coated, 4 Flutes, 60 Degree V-Groove Chamfer End, 1/4

Current price: 14.99 USD


Check price and availability


Length: 5 Centimeters

  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length.
  • Made in the USA
  • Applicable for steel, cast iron, nonferrous material
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Condition:Brand new and unused
  • Total length:50-51MM (2")
  • Shank diameter: 1/4"(6.35mm)
  • Shape: V-shape / Degree: 60°
  • Type: Chamfering router bits / Brand Name: JERRAY Tools

More Info

1" Diameter 45 Degree Chamfer Tool, HSS, 5/16" Wide, 1/2" Shank, High Speed Steel, Super Tool, 85203, USA Made

Search only Super Tool brand name
1

Current price: 52.95 USD


Check price and availability


Height: 1 Inches

Length: 2.5 Inches

Width: 1 Inches

Weight: 0.19 Pounds

  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length.
  • Made in the USA
  • Applicable for steel, cast iron, nonferrous material
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Condition:Brand new and unused
  • Total length:50-51MM (2")
  • Shank diameter: 1/4"(6.35mm)
  • Shape: V-shape / Degree: 60°
  • Type: Chamfering router bits / Brand Name: JERRAY Tools
  • 1/2 Width
  • 1" Diameter
  • 2 1/2 Overall Length
  • 45° Angle
  • 1/2 Shank Diameter

More Info

SpeTool Carbide Chamfer End Mill V Groove Router Bit 60 Degree, 4 Flutes 1/4 inch Shank for CNC Carving and Chamfering

Search only SpeTool brand name
SpeTool Carbide Chamfer End Mill V Groove Router Bit 60 Degree, 4 Flutes 1/4 inch Shank for CNC Carving and Chamfering

Current price: 14.99 USD


Check price and availability


  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length.
  • Made in the USA
  • Applicable for steel, cast iron, nonferrous material
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Condition:Brand new and unused
  • Total length:50-51MM (2")
  • Shank diameter: 1/4"(6.35mm)
  • Shape: V-shape / Degree: 60°
  • Type: Chamfering router bits / Brand Name: JERRAY Tools
  • 1/2 Width
  • 1" Diameter
  • 2 1/2 Overall Length
  • 45° Angle
  • 1/2 Shank Diameter
  • V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
  • Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length.

More Info

JERRAY Chamfering Mill, Carbide with TiAlN Coated, 4 Flutes, 90 Degree V-Groove Chamfer End, 1/4" Diameter

Search only JERRAY brand name
JERRAY Chamfering Mill, Carbide with TiAlN Coated, 4 Flutes, 90 Degree V-Groove Chamfer End, 1/4

Current price: 14.99 USD


Check price and availability


Length: 5 Centimeters

  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length.
  • Made in the USA
  • Applicable for steel, cast iron, nonferrous material
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Condition:Brand new and unused
  • Total length:50-51MM (2")
  • Shank diameter: 1/4"(6.35mm)
  • Shape: V-shape / Degree: 60°
  • Type: Chamfering router bits / Brand Name: JERRAY Tools
  • 1/2 Width
  • 1" Diameter
  • 2 1/2 Overall Length
  • 45° Angle
  • 1/2 Shank Diameter
  • V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
  • Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length.
  • Condition:Brand new and unused
  • Total length:50-51MM (2")
  • Shank diameter: 1/4"(6.35mm)
  • Shape: V-shape / Degree: 90°
  • Type: Chamfering router bits / Brand Name: JERRAY Tools

More Info

CSLU 5Pcs 82 Degree 5 Flute 6mm Round Shank HSS Chamfer Chamfering End Mill Cutter Bit Countersink Set 1/4 3/8 1/2 5/8 3/4 inch

Search only CSLU brand name
CSLU 5Pcs 82 Degree 5 Flute 6mm Round Shank HSS Chamfer Chamfering End Mill Cutter Bit Countersink Set 1/4 3/8 1/2 5/8 3/4 inch

Current price: 19.99 USD


Check price and availability


Height: 1.181102361 Inches

Length: 4.724409444 Inches

Width: 3.149606296 Inches

Weight: 234 Grams

  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length.
  • Made in the USA
  • Applicable for steel, cast iron, nonferrous material
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Condition:Brand new and unused
  • Total length:50-51MM (2")
  • Shank diameter: 1/4"(6.35mm)
  • Shape: V-shape / Degree: 60°
  • Type: Chamfering router bits / Brand Name: JERRAY Tools
  • 1/2 Width
  • 1" Diameter
  • 2 1/2 Overall Length
  • 45° Angle
  • 1/2 Shank Diameter
  • V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
  • Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length.
  • Condition:Brand new and unused
  • Total length:50-51MM (2")
  • Shank diameter: 1/4"(6.35mm)
  • Shape: V-shape / Degree: 90°
  • Type: Chamfering router bits / Brand Name: JERRAY Tools
  • Package Included: 1/4,3/8,1/2,5/8,3/4inch chamfering device.
  • During use, the five blade can better chip removal, the blade is not easily blunt.
  • High hardness.
  • For aluminum, iron, PV panels and other soft materials.
  • 5 blade chamfering device 82 degree.

More Info

CSLU-Tool 6 Pcs 90 Degree 3 Flute Titanium HSS Chamfer Chamfering Cutter Drill Bits End Mill Countersink

Search only CSLU-Tool brand name
CSLU-Tool 6 Pcs 90 Degree 3 Flute Titanium HSS Chamfer Chamfering Cutter Drill Bits End Mill Countersink

Current price: 12.99 USD


Check price and availability


Height: 0.79 Inches

Length: 5.91 Inches

Width: 3.94 Inches

Weight: 0.04 Pounds

  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length.
  • Made in the USA
  • Applicable for steel, cast iron, nonferrous material
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Condition:Brand new and unused
  • Total length:50-51MM (2")
  • Shank diameter: 1/4"(6.35mm)
  • Shape: V-shape / Degree: 60°
  • Type: Chamfering router bits / Brand Name: JERRAY Tools
  • 1/2 Width
  • 1" Diameter
  • 2 1/2 Overall Length
  • 45° Angle
  • 1/2 Shank Diameter
  • V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
  • Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length.
  • Condition:Brand new and unused
  • Total length:50-51MM (2")
  • Shank diameter: 1/4"(6.35mm)
  • Shape: V-shape / Degree: 90°
  • Type: Chamfering router bits / Brand Name: JERRAY Tools
  • Package Included: 1/4,3/8,1/2,5/8,3/4inch chamfering device.
  • During use, the five blade can better chip removal, the blade is not easily blunt.
  • High hardness.
  • For aluminum, iron, PV panels and other soft materials.
  • 5 blade chamfering device 82 degree.
  • Sharp and durable, you can use it for a long time
  • High precision and low roughness of the machined surface, strong applicability
  • Specification: head diameter * shank diameter * length 6.3MM: 6.3mm * 5mm * 45mm 8.3MM: 8.3mm * 6mm * 50mm 10.4MM: 10.4mm * 6mm * 50mm 12.4MM: 12.4mm * 8mm * 52mm 16.5MM: 16.5mm * 10mm * 60mm 20.5MM: 20.5mm * 10mm * 65mm
  • Material: HSS 4241. Surface treatment: Titanium-coated. Total Length: 6.3mm/ 8.3mm /10.4mm / 12.4mm / 16.5mm / 20.5mm
  • Titanium three edge chamfering. It is suitable for use in the workpiece which the hardness is under 25 degrees,such as aluminium sheet, thin iron plate, the insulating board or PVC board

More Info

45°SSK Indexable Chamfer End Mill Drill Holder with 10Pcs APKT1604 Insert Blades

Search only Balance World Inc brand name
45°SSK Indexable Chamfer End Mill Drill Holder with 10Pcs APKT1604 Insert Blades

Current price: 46.99 USD


Check price and availability


  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length.
  • Made in the USA
  • Applicable for steel, cast iron, nonferrous material
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Condition:Brand new and unused
  • Total length:50-51MM (2")
  • Shank diameter: 1/4"(6.35mm)
  • Shape: V-shape / Degree: 60°
  • Type: Chamfering router bits / Brand Name: JERRAY Tools
  • 1/2 Width
  • 1" Diameter
  • 2 1/2 Overall Length
  • 45° Angle
  • 1/2 Shank Diameter
  • V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
  • Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length.
  • Condition:Brand new and unused
  • Total length:50-51MM (2")
  • Shank diameter: 1/4"(6.35mm)
  • Shape: V-shape / Degree: 90°
  • Type: Chamfering router bits / Brand Name: JERRAY Tools
  • Package Included: 1/4,3/8,1/2,5/8,3/4inch chamfering device.
  • During use, the five blade can better chip removal, the blade is not easily blunt.
  • High hardness.
  • For aluminum, iron, PV panels and other soft materials.
  • 5 blade chamfering device 82 degree.
  • Sharp and durable, you can use it for a long time
  • High precision and low roughness of the machined surface, strong applicability
  • Specification: head diameter * shank diameter * length 6.3MM: 6.3mm * 5mm * 45mm 8.3MM: 8.3mm * 6mm * 50mm 10.4MM: 10.4mm * 6mm * 50mm 12.4MM: 12.4mm * 8mm * 52mm 16.5MM: 16.5mm * 10mm * 60mm 20.5MM: 20.5mm * 10mm * 65mm
  • Material: HSS 4241. Surface treatment: Titanium-coated. Total Length: 6.3mm/ 8.3mm /10.4mm / 12.4mm / 16.5mm / 20.5mm
  • Titanium three edge chamfering. It is suitable for use in the workpiece which the hardness is under 25 degrees,such as aluminium sheet, thin iron plate, the insulating board or PVC board
  • Helix Angle: 45° Helix
  • Screws: M4 Wrench: T15
  • Material: Aluminum Blade
  • Aluminum insert: APKT1604
  • 100% brand new with high quality

More Info

Bassett - B10026 MCH-2D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 90 Degrees Profile Angle, Chamfer End, 0.15" Cutting Length, 1/8" Cutting Diameter, 1-1/2" Length (Pack of 1)

Search only Bassett brand name
Bassett - B10026 MCH-2D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 90 Degrees Profile Angle, Chamfer End, 0.15

Current price: 17.85 USD


Check price and availability


Height: 0.3937 Inches

Length: 3.3071 Inches

Width: 0.3937 Inches

Weight: 0.0088 Pounds

  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length.
  • Made in the USA
  • Applicable for steel, cast iron, nonferrous material
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Condition:Brand new and unused
  • Total length:50-51MM (2")
  • Shank diameter: 1/4"(6.35mm)
  • Shape: V-shape / Degree: 60°
  • Type: Chamfering router bits / Brand Name: JERRAY Tools
  • 1/2 Width
  • 1" Diameter
  • 2 1/2 Overall Length
  • 45° Angle
  • 1/2 Shank Diameter
  • V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets.
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface.
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End.
  • Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length.
  • Condition:Brand new and unused
  • Total length:50-51MM (2")
  • Shank diameter: 1/4"(6.35mm)
  • Shape: V-shape / Degree: 90°
  • Type: Chamfering router bits / Brand Name: JERRAY Tools
  • Package Included: 1/4,3/8,1/2,5/8,3/4inch chamfering device.
  • During use, the five blade can better chip removal, the blade is not easily blunt.
  • High hardness.
  • For aluminum, iron, PV panels and other soft materials.
  • 5 blade chamfering device 82 degree.
  • Sharp and durable, you can use it for a long time
  • High precision and low roughness of the machined surface, strong applicability
  • Specification: head diameter * shank diameter * length 6.3MM: 6.3mm * 5mm * 45mm 8.3MM: 8.3mm * 6mm * 50mm 10.4MM: 10.4mm * 6mm * 50mm 12.4MM: 12.4mm * 8mm * 52mm 16.5MM: 16.5mm * 10mm * 60mm 20.5MM: 20.5mm * 10mm * 65mm
  • Material: HSS 4241. Surface treatment: Titanium-coated. Total Length: 6.3mm/ 8.3mm /10.4mm / 12.4mm / 16.5mm / 20.5mm
  • Titanium three edge chamfering. It is suitable for use in the workpiece which the hardness is under 25 degrees,such as aluminium sheet, thin iron plate, the insulating board or PVC board
  • Helix Angle: 45° Helix
  • Screws: M4 Wrench: T15
  • Material: Aluminum Blade
  • Aluminum insert: APKT1604
  • 100% brand new with high quality
  • Made in the USA
  • Applicable for steel, cast iron, nonferrous material.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

More Info

1    2    3    4    5    6    7    8    9    10