Elegant Carpentry Squares. Reviews August, 2021, page 10

Johnson Level & Tool CS5 16-Inch x 24-Inch Aluminum Framing Square

More from Tools & Home Improvement
Search only Johnson Level & Tool brand name
Johnson Level & Tool CS5 16-Inch x 24-Inch Aluminum Framing Square

Current price: 17.75 USD


Check price and availability


Height: 2.6 Inches

Length: 3.2 Inches

Width: 2.5 Inches

Weight: 0.5 Pounds

Warranty: 1 Year Warranty: Johnson Level warrants this product against defects in material and workmanship for one year after the confirmed purchase date. At its option, the company will replace or repair the product if it fails under normal use.

  • Includes octagon scales, rafter tables, brace tables and board foot tables
  • Graduations measure in 1/8", 1/10", 1/12", 1/16"
  • Permanently stamped graduations and numbers
  • Aluminum body will not rust

More Info

Woodstock D4089 Machinist Square Set, 4-Piece

More from Tools & Home Improvement
Search only Woodstock brand name
Woodstock D4089 Machinist Square Set, 4-Piece

Current price: 29.98 USD

Saving: $3.01 (9%)


Check price and availability


Weight: 1.4 Pounds

Warranty: 1-Year Warranty

  • Includes octagon scales, rafter tables, brace tables and board foot tables
  • Graduations measure in 1/8", 1/10", 1/12", 1/16"
  • Permanently stamped graduations and numbers
  • Aluminum body will not rust
  • Highly accurate for set-up and layout work
  • Set includes 2", 3", 4" and 6" squares
  • All have common beam and blade widths and thickness
  • These squares are made from hardened, tempered and polished steel

More Info

Precision Machinist Square 4 Inch Engineer Square 90 Degree Right Angle Ruler Ground Steel Hardened with Seat 100x70mm

More from Tools & Home Improvement
Search only Boomgood brand name
Precision Machinist Square 4 Inch Engineer Square 90 Degree Right Angle Ruler Ground Steel Hardened with Seat 100x70mm

Current price: 15.98 USD


Check price and availability


  • Includes octagon scales, rafter tables, brace tables and board foot tables
  • Graduations measure in 1/8", 1/10", 1/12", 1/16"
  • Permanently stamped graduations and numbers
  • Aluminum body will not rust
  • Highly accurate for set-up and layout work
  • Set includes 2", 3", 4" and 6" squares
  • All have common beam and blade widths and thickness
  • These squares are made from hardened, tempered and polished steel
  • Suitable for detecting angles and marking on parts
  • Specially hardened and fine ground
  • Squares are true right angles both inside and outside
  • Designed for precision layout and measurement work
  • This machinist square is made of hardened stainless steel and heat treated

More Info

OriGlam Triangle Ruler Triangle Angle Tool

More from Tools & Home Improvement
Search only OriGlam brand name
OriGlam Triangle Ruler Triangle Angle Tool

Current price: 7.58 USD


Check price and availability


Height: 0.787401574 Inches

Length: 7.87401574 Inches

Width: 5.905511805 Inches

  • Includes octagon scales, rafter tables, brace tables and board foot tables
  • Graduations measure in 1/8", 1/10", 1/12", 1/16"
  • Permanently stamped graduations and numbers
  • Aluminum body will not rust
  • Highly accurate for set-up and layout work
  • Set includes 2", 3", 4" and 6" squares
  • All have common beam and blade widths and thickness
  • These squares are made from hardened, tempered and polished steel
  • Suitable for detecting angles and marking on parts
  • Specially hardened and fine ground
  • Squares are true right angles both inside and outside
  • Designed for precision layout and measurement work
  • This machinist square is made of hardened stainless steel and heat treated
  • Also useful for hobbyists, home builders, manufacturers, artists.
  • Tri-square, meter square, protractor, line scriber & saw guide all in one tool.
  • Used to make precise right angles & as a cutting & drawing guide - features preset measurements.
  • Must-have carpenter's tool for framing, roofing, angling & more.
  • Strong die cast aluminum construction.

More Info

Johnson Level & Tool RAS-1B 7-inch Professional Aluminum Rafter Angle Square

More from Tools & Home Improvement
Search only Johnson Level & Tool brand name
Johnson Level & Tool RAS-1B 7-inch Professional Aluminum Rafter Angle Square

Current price: 7.97 USD


Check price and availability


Height: 0.81 Inches

Length: 7 Inches

Width: 7 Inches

Weight: 0.55 Pounds

Warranty: Limited Lifetime Warranty: Johnson level warrants this product against defects in material and workmanship of mechanical parts for life and electronics for one year. The company will replace or repair the product if it fails under normal use. This warranty is limited to the repair or replacement of the product only.

  • Includes octagon scales, rafter tables, brace tables and board foot tables
  • Graduations measure in 1/8", 1/10", 1/12", 1/16"
  • Permanently stamped graduations and numbers
  • Aluminum body will not rust
  • Highly accurate for set-up and layout work
  • Set includes 2", 3", 4" and 6" squares
  • All have common beam and blade widths and thickness
  • These squares are made from hardened, tempered and polished steel
  • Suitable for detecting angles and marking on parts
  • Specially hardened and fine ground
  • Squares are true right angles both inside and outside
  • Designed for precision layout and measurement work
  • This machinist square is made of hardened stainless steel and heat treated
  • Also useful for hobbyists, home builders, manufacturers, artists.
  • Tri-square, meter square, protractor, line scriber & saw guide all in one tool.
  • Used to make precise right angles & as a cutting & drawing guide - features preset measurements.
  • Must-have carpenter's tool for framing, roofing, angling & more.
  • Strong die cast aluminum construction.
  • ADDITIONAL FEATURES: Permanent graduations with easy-to-read numbers, continuous scribing notches – ideal for ripping at 3-1/2” and 5-1/2”, 2x4 board dimension markers for measuring 1-1/2”, 3” and 3-1/2”, low-glare protective powder coated finish
  • ONE NUMBER LAYOUT: For roofs, solar panel supports, stairs, cabinets trim work and many other layout projects. The rafter scales are laid out mathematically to avoid time consuming calculations
  • SIMPLIFY STAIR LAYOUT: The Johnny Square’s integrated distance and angle scales let you quickly and accurately mark your cut lines on your stringers and, of course, this rafter square has scales for cutting hip, valley and jack rafters
  • BUILDERS AND CONTRACTERS: The thick edge is useful as a saw guide. It can be used directly with the saw against the square for cross cuts or angled cuts using the etched protractor scale. It can be used indirectly as well, using the scribing notches to create a saw cut line for rip cuts
  • ACCURACY AND DURABILITY: This aluminum rafter angle square boasts a solid aluminum body with CNC machined edges for greater accuracy and durability for any job or worksite

More Info

VINCA ARLS-12 Aluminum Rafter Carpenter Triangle Square 12 inch Measuring Layout Tool

More from Tools & Home Improvement
Search only VINCA brand name
VINCA ARLS-12 Aluminum Rafter Carpenter Triangle Square 12 inch Measuring Layout Tool

Current price: 19.99 USD

Saving: $10.00 (33%)


Check price and availability


Height: 1 Inches

Length: 12 Inches

Width: 12 Inches

Weight: 1.125 Pounds

  • Includes octagon scales, rafter tables, brace tables and board foot tables
  • Graduations measure in 1/8", 1/10", 1/12", 1/16"
  • Permanently stamped graduations and numbers
  • Aluminum body will not rust
  • Highly accurate for set-up and layout work
  • Set includes 2", 3", 4" and 6" squares
  • All have common beam and blade widths and thickness
  • These squares are made from hardened, tempered and polished steel
  • Suitable for detecting angles and marking on parts
  • Specially hardened and fine ground
  • Squares are true right angles both inside and outside
  • Designed for precision layout and measurement work
  • This machinist square is made of hardened stainless steel and heat treated
  • Also useful for hobbyists, home builders, manufacturers, artists.
  • Tri-square, meter square, protractor, line scriber & saw guide all in one tool.
  • Used to make precise right angles & as a cutting & drawing guide - features preset measurements.
  • Must-have carpenter's tool for framing, roofing, angling & more.
  • Strong die cast aluminum construction.
  • ADDITIONAL FEATURES: Permanent graduations with easy-to-read numbers, continuous scribing notches – ideal for ripping at 3-1/2” and 5-1/2”, 2x4 board dimension markers for measuring 1-1/2”, 3” and 3-1/2”, low-glare protective powder coated finish
  • ONE NUMBER LAYOUT: For roofs, solar panel supports, stairs, cabinets trim work and many other layout projects. The rafter scales are laid out mathematically to avoid time consuming calculations
  • SIMPLIFY STAIR LAYOUT: The Johnny Square’s integrated distance and angle scales let you quickly and accurately mark your cut lines on your stringers and, of course, this rafter square has scales for cutting hip, valley and jack rafters
  • BUILDERS AND CONTRACTERS: The thick edge is useful as a saw guide. It can be used directly with the saw against the square for cross cuts or angled cuts using the etched protractor scale. It can be used indirectly as well, using the scribing notches to create a saw cut line for rip cuts
  • ACCURACY AND DURABILITY: This aluminum rafter angle square boasts a solid aluminum body with CNC machined edges for greater accuracy and durability for any job or worksite
  • Comes with rafter conversion table
  • Wider base that provide stable grip on materials
  • Thick aluminum body that support heavy duty use
  • Durable deep stampings; Yellow markings on black
  • 12" x 12" Square with multiple scales; 1/8-, 1/10-, 1/12-, and 1/16-"; 12" x 0.001

More Info

Spear & Jackson CTS12 12 Inch Carpenters Try Square

More from Tools & Home Improvement
Search only Spear & Jackson brand name
Spear & Jackson CTS12 12 Inch Carpenters Try Square

Current price: 22.34 USD

Saving: $2.65 (11%)


Check price and availability


Height: 0.71 Inches

Length: 13.98 Inches

Width: 8.27 Inches

  • Includes octagon scales, rafter tables, brace tables and board foot tables
  • Graduations measure in 1/8", 1/10", 1/12", 1/16"
  • Permanently stamped graduations and numbers
  • Aluminum body will not rust
  • Highly accurate for set-up and layout work
  • Set includes 2", 3", 4" and 6" squares
  • All have common beam and blade widths and thickness
  • These squares are made from hardened, tempered and polished steel
  • Suitable for detecting angles and marking on parts
  • Specially hardened and fine ground
  • Squares are true right angles both inside and outside
  • Designed for precision layout and measurement work
  • This machinist square is made of hardened stainless steel and heat treated
  • Also useful for hobbyists, home builders, manufacturers, artists.
  • Tri-square, meter square, protractor, line scriber & saw guide all in one tool.
  • Used to make precise right angles & as a cutting & drawing guide - features preset measurements.
  • Must-have carpenter's tool for framing, roofing, angling & more.
  • Strong die cast aluminum construction.
  • ADDITIONAL FEATURES: Permanent graduations with easy-to-read numbers, continuous scribing notches – ideal for ripping at 3-1/2” and 5-1/2”, 2x4 board dimension markers for measuring 1-1/2”, 3” and 3-1/2”, low-glare protective powder coated finish
  • ONE NUMBER LAYOUT: For roofs, solar panel supports, stairs, cabinets trim work and many other layout projects. The rafter scales are laid out mathematically to avoid time consuming calculations
  • SIMPLIFY STAIR LAYOUT: The Johnny Square’s integrated distance and angle scales let you quickly and accurately mark your cut lines on your stringers and, of course, this rafter square has scales for cutting hip, valley and jack rafters
  • BUILDERS AND CONTRACTERS: The thick edge is useful as a saw guide. It can be used directly with the saw against the square for cross cuts or angled cuts using the etched protractor scale. It can be used indirectly as well, using the scribing notches to create a saw cut line for rip cuts
  • ACCURACY AND DURABILITY: This aluminum rafter angle square boasts a solid aluminum body with CNC machined edges for greater accuracy and durability for any job or worksite
  • Comes with rafter conversion table
  • Wider base that provide stable grip on materials
  • Thick aluminum body that support heavy duty use
  • Durable deep stampings; Yellow markings on black
  • 12" x 12" Square with multiple scales; 1/8-, 1/10-, 1/12-, and 1/16-"; 12" x 0.001
  • Base Depth and Width: 48 x 18.0 ± 0.5mm
  • Base Length: 203 ± 1mm
  • Spring steel blade
  • Brass top and bottom faces
  • Hardwood stock

More Info

Combination and Double Square Woodworking Tool, Rafter Square Combination Square Tool Set, Carpentry Tools, Carpenter Square, Fathers Day Gifts from Wife (C(18inch right angle+triangle))

More from Tools & Home Improvement
Search only ARAR brand name
Combination and Double Square Woodworking Tool, Rafter Square Combination Square Tool Set, Carpentry Tools, Carpenter Square, Fathers Day Gifts from Wife (C(18inch right angle+triangle))

Current price: 31.19 USD


Check price and availability


  • Includes octagon scales, rafter tables, brace tables and board foot tables
  • Graduations measure in 1/8", 1/10", 1/12", 1/16"
  • Permanently stamped graduations and numbers
  • Aluminum body will not rust
  • Highly accurate for set-up and layout work
  • Set includes 2", 3", 4" and 6" squares
  • All have common beam and blade widths and thickness
  • These squares are made from hardened, tempered and polished steel
  • Suitable for detecting angles and marking on parts
  • Specially hardened and fine ground
  • Squares are true right angles both inside and outside
  • Designed for precision layout and measurement work
  • This machinist square is made of hardened stainless steel and heat treated
  • Also useful for hobbyists, home builders, manufacturers, artists.
  • Tri-square, meter square, protractor, line scriber & saw guide all in one tool.
  • Used to make precise right angles & as a cutting & drawing guide - features preset measurements.
  • Must-have carpenter's tool for framing, roofing, angling & more.
  • Strong die cast aluminum construction.
  • ADDITIONAL FEATURES: Permanent graduations with easy-to-read numbers, continuous scribing notches – ideal for ripping at 3-1/2” and 5-1/2”, 2x4 board dimension markers for measuring 1-1/2”, 3” and 3-1/2”, low-glare protective powder coated finish
  • ONE NUMBER LAYOUT: For roofs, solar panel supports, stairs, cabinets trim work and many other layout projects. The rafter scales are laid out mathematically to avoid time consuming calculations
  • SIMPLIFY STAIR LAYOUT: The Johnny Square’s integrated distance and angle scales let you quickly and accurately mark your cut lines on your stringers and, of course, this rafter square has scales for cutting hip, valley and jack rafters
  • BUILDERS AND CONTRACTERS: The thick edge is useful as a saw guide. It can be used directly with the saw against the square for cross cuts or angled cuts using the etched protractor scale. It can be used indirectly as well, using the scribing notches to create a saw cut line for rip cuts
  • ACCURACY AND DURABILITY: This aluminum rafter angle square boasts a solid aluminum body with CNC machined edges for greater accuracy and durability for any job or worksite
  • Comes with rafter conversion table
  • Wider base that provide stable grip on materials
  • Thick aluminum body that support heavy duty use
  • Durable deep stampings; Yellow markings on black
  • 12" x 12" Square with multiple scales; 1/8-, 1/10-, 1/12-, and 1/16-"; 12" x 0.001
  • Base Depth and Width: 48 x 18.0 ± 0.5mm
  • Base Length: 203 ± 1mm
  • Spring steel blade
  • Brass top and bottom faces
  • Hardwood stock
  • 【Maintain perfect positioning】:For years one of our customers? favorite features of our fixed-head squares has been the shoulder that keeps the square in position on the edge of your stock. We?ve added that to our adjustable squares, too.
  • 【Clearly Identifiable Scale】:The rafter square has permanent deep markings and white graduations for max Readability any lighting. The stainless steel ruler of combination square has deep etching scale for superior legibility and long-lasting usage.
  • 【Small error】:The scales engraved on the blades of the squares have 16ths on one edge and 32nds on the other. All scales are laser engraved to a tolerance of .004" total accumulated error over the entire length of the blade.
  • 【Accurate measurement】:The feature most useful on these new squares is the laser-cut scribing guides cut every sixteenth-inch along the blade. The guides are just the right size to capture a pencil tip for highly accurate parallel scribing.
  • 【Woodpeckers Mini Square】:The combination square features like laser-accurate scribing guides, positive indexing at every full inch, a sliding head support and precise, laser-engraved scales. we built the same features into a larger size and two sizes of double squares, they?ll never rust.

More Info

Gearwoo Woodworking Triangle Ruler, Multifunctional Woodworking Triangle Ruler Angle Ruler Revolutionary Carpentry Tool Measuring Tools

More from Tools & Home Improvement
Search only Gearwoo brand name
Gearwoo Woodworking Triangle Ruler, Multifunctional Woodworking Triangle Ruler Angle Ruler Revolutionary Carpentry Tool Measuring Tools

Current price: 14.99 USD


Check price and availability


  • Includes octagon scales, rafter tables, brace tables and board foot tables
  • Graduations measure in 1/8", 1/10", 1/12", 1/16"
  • Permanently stamped graduations and numbers
  • Aluminum body will not rust
  • Highly accurate for set-up and layout work
  • Set includes 2", 3", 4" and 6" squares
  • All have common beam and blade widths and thickness
  • These squares are made from hardened, tempered and polished steel
  • Suitable for detecting angles and marking on parts
  • Specially hardened and fine ground
  • Squares are true right angles both inside and outside
  • Designed for precision layout and measurement work
  • This machinist square is made of hardened stainless steel and heat treated
  • Also useful for hobbyists, home builders, manufacturers, artists.
  • Tri-square, meter square, protractor, line scriber & saw guide all in one tool.
  • Used to make precise right angles & as a cutting & drawing guide - features preset measurements.
  • Must-have carpenter's tool for framing, roofing, angling & more.
  • Strong die cast aluminum construction.
  • ADDITIONAL FEATURES: Permanent graduations with easy-to-read numbers, continuous scribing notches – ideal for ripping at 3-1/2” and 5-1/2”, 2x4 board dimension markers for measuring 1-1/2”, 3” and 3-1/2”, low-glare protective powder coated finish
  • ONE NUMBER LAYOUT: For roofs, solar panel supports, stairs, cabinets trim work and many other layout projects. The rafter scales are laid out mathematically to avoid time consuming calculations
  • SIMPLIFY STAIR LAYOUT: The Johnny Square’s integrated distance and angle scales let you quickly and accurately mark your cut lines on your stringers and, of course, this rafter square has scales for cutting hip, valley and jack rafters
  • BUILDERS AND CONTRACTERS: The thick edge is useful as a saw guide. It can be used directly with the saw against the square for cross cuts or angled cuts using the etched protractor scale. It can be used indirectly as well, using the scribing notches to create a saw cut line for rip cuts
  • ACCURACY AND DURABILITY: This aluminum rafter angle square boasts a solid aluminum body with CNC machined edges for greater accuracy and durability for any job or worksite
  • Comes with rafter conversion table
  • Wider base that provide stable grip on materials
  • Thick aluminum body that support heavy duty use
  • Durable deep stampings; Yellow markings on black
  • 12" x 12" Square with multiple scales; 1/8-, 1/10-, 1/12-, and 1/16-"; 12" x 0.001
  • Base Depth and Width: 48 x 18.0 ± 0.5mm
  • Base Length: 203 ± 1mm
  • Spring steel blade
  • Brass top and bottom faces
  • Hardwood stock
  • 【Maintain perfect positioning】:For years one of our customers? favorite features of our fixed-head squares has been the shoulder that keeps the square in position on the edge of your stock. We?ve added that to our adjustable squares, too.
  • 【Clearly Identifiable Scale】:The rafter square has permanent deep markings and white graduations for max Readability any lighting. The stainless steel ruler of combination square has deep etching scale for superior legibility and long-lasting usage.
  • 【Small error】:The scales engraved on the blades of the squares have 16ths on one edge and 32nds on the other. All scales are laser engraved to a tolerance of .004" total accumulated error over the entire length of the blade.
  • 【Accurate measurement】:The feature most useful on these new squares is the laser-cut scribing guides cut every sixteenth-inch along the blade. The guides are just the right size to capture a pencil tip for highly accurate parallel scribing.
  • 【Woodpeckers Mini Square】:The combination square features like laser-accurate scribing guides, positive indexing at every full inch, a sliding head support and precise, laser-engraved scales. we built the same features into a larger size and two sizes of double squares, they?ll never rust.
  • Made of fine quality material, rust-proof and wear-resistant, practical and clear size.
  • Machined from solid aluminum with an anodized protective finish, engraved angle scales for high accuracy and fine quality stainless steel and brass hardware.
  • Mark angled checkouts in any configuration without adjustment to the tool.
  • Mark accurate plumb cuts, birds mouth depth marks and seat cuts, without adjusting the tool or changing the tool's configuration.
  • Combines the functionality of a combination square, bevel, protractor, digital level and speed square, plus many very useful exclusive features into one compact and easy-to-use tool.

More Info

7 Inch Angle Square + 12 Inch Combination Square Tool + 3Pcs woodworking pen Set, Value Pack Aluminum Alloy Die-casting Carpenter Square

More from Tools & Home Improvement
Search only Deartisan brand name
7 Inch Angle Square + 12 Inch Combination Square Tool + 3Pcs woodworking pen Set, Value Pack Aluminum Alloy Die-casting Carpenter Square

Current price: 12.99 USD


Check price and availability


  • Includes octagon scales, rafter tables, brace tables and board foot tables
  • Graduations measure in 1/8", 1/10", 1/12", 1/16"
  • Permanently stamped graduations and numbers
  • Aluminum body will not rust
  • Highly accurate for set-up and layout work
  • Set includes 2", 3", 4" and 6" squares
  • All have common beam and blade widths and thickness
  • These squares are made from hardened, tempered and polished steel
  • Suitable for detecting angles and marking on parts
  • Specially hardened and fine ground
  • Squares are true right angles both inside and outside
  • Designed for precision layout and measurement work
  • This machinist square is made of hardened stainless steel and heat treated
  • Also useful for hobbyists, home builders, manufacturers, artists.
  • Tri-square, meter square, protractor, line scriber & saw guide all in one tool.
  • Used to make precise right angles & as a cutting & drawing guide - features preset measurements.
  • Must-have carpenter's tool for framing, roofing, angling & more.
  • Strong die cast aluminum construction.
  • ADDITIONAL FEATURES: Permanent graduations with easy-to-read numbers, continuous scribing notches – ideal for ripping at 3-1/2” and 5-1/2”, 2x4 board dimension markers for measuring 1-1/2”, 3” and 3-1/2”, low-glare protective powder coated finish
  • ONE NUMBER LAYOUT: For roofs, solar panel supports, stairs, cabinets trim work and many other layout projects. The rafter scales are laid out mathematically to avoid time consuming calculations
  • SIMPLIFY STAIR LAYOUT: The Johnny Square’s integrated distance and angle scales let you quickly and accurately mark your cut lines on your stringers and, of course, this rafter square has scales for cutting hip, valley and jack rafters
  • BUILDERS AND CONTRACTERS: The thick edge is useful as a saw guide. It can be used directly with the saw against the square for cross cuts or angled cuts using the etched protractor scale. It can be used indirectly as well, using the scribing notches to create a saw cut line for rip cuts
  • ACCURACY AND DURABILITY: This aluminum rafter angle square boasts a solid aluminum body with CNC machined edges for greater accuracy and durability for any job or worksite
  • Comes with rafter conversion table
  • Wider base that provide stable grip on materials
  • Thick aluminum body that support heavy duty use
  • Durable deep stampings; Yellow markings on black
  • 12" x 12" Square with multiple scales; 1/8-, 1/10-, 1/12-, and 1/16-"; 12" x 0.001
  • Base Depth and Width: 48 x 18.0 ± 0.5mm
  • Base Length: 203 ± 1mm
  • Spring steel blade
  • Brass top and bottom faces
  • Hardwood stock
  • 【Maintain perfect positioning】:For years one of our customers? favorite features of our fixed-head squares has been the shoulder that keeps the square in position on the edge of your stock. We?ve added that to our adjustable squares, too.
  • 【Clearly Identifiable Scale】:The rafter square has permanent deep markings and white graduations for max Readability any lighting. The stainless steel ruler of combination square has deep etching scale for superior legibility and long-lasting usage.
  • 【Small error】:The scales engraved on the blades of the squares have 16ths on one edge and 32nds on the other. All scales are laser engraved to a tolerance of .004" total accumulated error over the entire length of the blade.
  • 【Accurate measurement】:The feature most useful on these new squares is the laser-cut scribing guides cut every sixteenth-inch along the blade. The guides are just the right size to capture a pencil tip for highly accurate parallel scribing.
  • 【Woodpeckers Mini Square】:The combination square features like laser-accurate scribing guides, positive indexing at every full inch, a sliding head support and precise, laser-engraved scales. we built the same features into a larger size and two sizes of double squares, they?ll never rust.
  • Made of fine quality material, rust-proof and wear-resistant, practical and clear size.
  • Machined from solid aluminum with an anodized protective finish, engraved angle scales for high accuracy and fine quality stainless steel and brass hardware.
  • Mark angled checkouts in any configuration without adjustment to the tool.
  • Mark accurate plumb cuts, birds mouth depth marks and seat cuts, without adjusting the tool or changing the tool's configuration.
  • Combines the functionality of a combination square, bevel, protractor, digital level and speed square, plus many very useful exclusive features into one compact and easy-to-use tool.
  • 【Guarantee】One month return for no reason and 8 Month free replacement.
  • Combination Sqaure Includes metric and imperial scales, Meet your different need.
  • The combination square added Scriber and Level, Accurately Measure and Draw 90 Degree And 45 Degree Angles.
  • We have integrated many functions into this carpentry ruler, for example framing square, tri square, mitre square, and protractor square. We believe that this tool will help you a lot.
  • Super value pack - Package include 7 Inch Rafter Square, 12 Inch combination square, 3 woodworking pen.

More Info

1    2    3    4    5    6    7    8    9    10