Exclusive Caliper Gages. Reviews September, 2021, page 2

iGaging ABSOLUTE ORIGIN 0-6" Digital Electronic Caliper Inch/Metric/Fraction IP54 Protection Bonus: Depth Gauge Base

Search only iGaging brand name
iGaging ABSOLUTE ORIGIN 0-6

Current price: 49.95 USD


Check price and availability


Height: 3.59842519318 Inches

Length: 5.99999999388 Inches

Width: 1.20078740035 Inches

Weight: 0.82 Pounds

  • 2 Years warranty
  • Meets DIN Standard 862; ISO certified manufacturing
  • USB cable available separately (SPC transfer Inch/mm decimal only).
  • IP54 protection: Water drop and dust resistant
  • Resolution: 0.0005"/0.01mm/1/128" ; Accuracy: 0.001" / 0.02mm; Range: 6"/150mm

More Info

GLTL Depth Gage General Tools Depth gauge Vernier caliper,0-6"/150mm,0-8"/200mm,0-12"/300mm (digital 0-150mm)

Search only GLTL brand name
GLTL Depth Gage General Tools Depth gauge Vernier caliper,0-6

Current price: 67.5 USD


Check price and availability


  • 2 Years warranty
  • Meets DIN Standard 862; ISO certified manufacturing
  • USB cable available separately (SPC transfer Inch/mm decimal only).
  • IP54 protection: Water drop and dust resistant
  • Resolution: 0.0005"/0.01mm/1/128" ; Accuracy: 0.001" / 0.02mm; Range: 6"/150mm
  • ★A safe protective package to ensure that it is not vulnerable to impact damage.
  • ★★★Depth Gage can measure the depth of holes, steps and columns more accurately。
  • ★Some people think that this mechanical caliper is not easy to read data, just like a needle watch and an electronic display watch, it is just a habit. This kind of mechanical caliper is the most suitable for the bad working environment without malfunction, and the precision deviation is not easy to occur.
  • ★Surface chrome plating, with sufficient hardness and corrosion resistance.
  • ★0.02mm Accuracy Alloyed Electroplating Chrome Vernier caliper 0-150mm 0-200mm 0-300mm range Locking screw for holding measurement.

More Info

Stair Tread Template Set for colins,Stair Cutting Tools,Replacement Template Steps Risers Clamp Plates Hand Tool,Shelf Scribe Layout Tool,Caliper Gages

Search only Tezoro brand name
Stair Tread Template Set for colins,Stair Cutting Tools,Replacement Template Steps Risers Clamp Plates Hand Tool,Shelf Scribe Layout Tool,Caliper Gages

Current price: 39.99 USD

Saving: $3.00 (7%)


Check price and availability


  • 2 Years warranty
  • Meets DIN Standard 862; ISO certified manufacturing
  • USB cable available separately (SPC transfer Inch/mm decimal only).
  • IP54 protection: Water drop and dust resistant
  • Resolution: 0.0005"/0.01mm/1/128" ; Accuracy: 0.001" / 0.02mm; Range: 6"/150mm
  • ★A safe protective package to ensure that it is not vulnerable to impact damage.
  • ★★★Depth Gage can measure the depth of holes, steps and columns more accurately。
  • ★Some people think that this mechanical caliper is not easy to read data, just like a needle watch and an electronic display watch, it is just a habit. This kind of mechanical caliper is the most suitable for the bad working environment without malfunction, and the precision deviation is not easy to occur.
  • ★Surface chrome plating, with sufficient hardness and corrosion resistance.
  • ★0.02mm Accuracy Alloyed Electroplating Chrome Vernier caliper 0-150mm 0-200mm 0-300mm range Locking screw for holding measurement.
  • 【New Verion with Craftsmanship】After May,We have Upgraded and strengthened the welds around every bolts of this Stair Tool.After more than 1,000 tests,they become quality parts that Durable and reusable.All Our Stair Tread Jigs are backed by Lifetime warranty.Simply email us back if our product ever fails you and we'll mail you a new original replacement free of charge.
  • 【Cutting Steps】: 1.assume all of your steps are uneven.Make sure your steps are level in all directions.2. Make sure you measure your overall riser height. 3.use a long straight edge to make sure the edges of your steps line up.4.MARK THE FRONT OF YOUR 1X2 BOARD you use with this Tread Template tool.Follow the steps,your cuts will be turned out perfect.
  • 【Multi-Uses】:The quantity of “Each” includes two pieces as shown, together they make up one tread tool.Manufactured of zinc plated steel to last a lifetime.Perfect for laying out stair treads, risers, and shelving.
  • 【High Quality and Reusable】:This Tread Template are engineered from impact and chemical resistant iron Material,which are very durable and reusable.Very easy to adjust the angle and length to match any job requirement.Securely locks into place using 4x knobs.Simple, easy to use and utterly indispensable for accurate cuts and measurements.
  • 【A real headache saver】:Stair Tread Template Set will help you lay out stair treads, risers, and shelving to perfection. The increased accuracy and savings in time will pay for the templates before you finish your next set of stairs. Easy to handle and adjust for the correct angles. Portable and simple.

More Info

Mitutoyo 500-196-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 6"/0 to 150mm Measuring Range, 0.0005"/0.01mm Resolution, LCD

Search only Mitutoyo brand name
Mitutoyo 500-196-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 6

Current price: 116.99 USD

Saving: $44.01 (27%)


Check price and availability


Height: 8.661417314 Inches

Length: 3.93700787 Inches

Width: 1.181102361 Inches

Weight: 0.3747858454 Pounds

  • 2 Years warranty
  • Meets DIN Standard 862; ISO certified manufacturing
  • USB cable available separately (SPC transfer Inch/mm decimal only).
  • IP54 protection: Water drop and dust resistant
  • Resolution: 0.0005"/0.01mm/1/128" ; Accuracy: 0.001" / 0.02mm; Range: 6"/150mm
  • ★A safe protective package to ensure that it is not vulnerable to impact damage.
  • ★★★Depth Gage can measure the depth of holes, steps and columns more accurately。
  • ★Some people think that this mechanical caliper is not easy to read data, just like a needle watch and an electronic display watch, it is just a habit. This kind of mechanical caliper is the most suitable for the bad working environment without malfunction, and the precision deviation is not easy to occur.
  • ★Surface chrome plating, with sufficient hardness and corrosion resistance.
  • ★0.02mm Accuracy Alloyed Electroplating Chrome Vernier caliper 0-150mm 0-200mm 0-300mm range Locking screw for holding measurement.
  • 【New Verion with Craftsmanship】After May,We have Upgraded and strengthened the welds around every bolts of this Stair Tool.After more than 1,000 tests,they become quality parts that Durable and reusable.All Our Stair Tread Jigs are backed by Lifetime warranty.Simply email us back if our product ever fails you and we'll mail you a new original replacement free of charge.
  • 【Cutting Steps】: 1.assume all of your steps are uneven.Make sure your steps are level in all directions.2. Make sure you measure your overall riser height. 3.use a long straight edge to make sure the edges of your steps line up.4.MARK THE FRONT OF YOUR 1X2 BOARD you use with this Tread Template tool.Follow the steps,your cuts will be turned out perfect.
  • 【Multi-Uses】:The quantity of “Each” includes two pieces as shown, together they make up one tread tool.Manufactured of zinc plated steel to last a lifetime.Perfect for laying out stair treads, risers, and shelving.
  • 【High Quality and Reusable】:This Tread Template are engineered from impact and chemical resistant iron Material,which are very durable and reusable.Very easy to adjust the angle and length to match any job requirement.Securely locks into place using 4x knobs.Simple, easy to use and utterly indispensable for accurate cuts and measurements.
  • 【A real headache saver】:Stair Tread Template Set will help you lay out stair treads, risers, and shelving to perfection. The increased accuracy and savings in time will pay for the templates before you finish your next set of stairs. Easy to handle and adjust for the correct angles. Portable and simple.
  • Includes protective case and SR44 silver oxide battery
  • Measures inside, outside, depth, and step values for versatility. With thumb roller. Except 500-500-10, 500-501-10,500-502-10
  • Advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water
  • Digital readout LCD shows inch or metric units for versatility when measuring
  • Measures 0 to 6" (0 to 150mm) in 0.0005" (0.01mm) increments for precision use

More Info

Digital Caliper, Adoric 0-6" Calipers Measuring Tool - Electronic Micrometer Caliper with Large LCD Screen, Auto-Off Feature, Inch and Millimeter Conversion

Search only Adoric brand name
Digital Caliper, Adoric 0-6

Current price: 10.99 USD


Check price and availability


Height: 0.393700787 Inches

Length: 11.023622036 Inches

Width: 3.543307083 Inches

Weight: 80 Grams

  • 2 Years warranty
  • Meets DIN Standard 862; ISO certified manufacturing
  • USB cable available separately (SPC transfer Inch/mm decimal only).
  • IP54 protection: Water drop and dust resistant
  • Resolution: 0.0005"/0.01mm/1/128" ; Accuracy: 0.001" / 0.02mm; Range: 6"/150mm
  • ★A safe protective package to ensure that it is not vulnerable to impact damage.
  • ★★★Depth Gage can measure the depth of holes, steps and columns more accurately。
  • ★Some people think that this mechanical caliper is not easy to read data, just like a needle watch and an electronic display watch, it is just a habit. This kind of mechanical caliper is the most suitable for the bad working environment without malfunction, and the precision deviation is not easy to occur.
  • ★Surface chrome plating, with sufficient hardness and corrosion resistance.
  • ★0.02mm Accuracy Alloyed Electroplating Chrome Vernier caliper 0-150mm 0-200mm 0-300mm range Locking screw for holding measurement.
  • 【New Verion with Craftsmanship】After May,We have Upgraded and strengthened the welds around every bolts of this Stair Tool.After more than 1,000 tests,they become quality parts that Durable and reusable.All Our Stair Tread Jigs are backed by Lifetime warranty.Simply email us back if our product ever fails you and we'll mail you a new original replacement free of charge.
  • 【Cutting Steps】: 1.assume all of your steps are uneven.Make sure your steps are level in all directions.2. Make sure you measure your overall riser height. 3.use a long straight edge to make sure the edges of your steps line up.4.MARK THE FRONT OF YOUR 1X2 BOARD you use with this Tread Template tool.Follow the steps,your cuts will be turned out perfect.
  • 【Multi-Uses】:The quantity of “Each” includes two pieces as shown, together they make up one tread tool.Manufactured of zinc plated steel to last a lifetime.Perfect for laying out stair treads, risers, and shelving.
  • 【High Quality and Reusable】:This Tread Template are engineered from impact and chemical resistant iron Material,which are very durable and reusable.Very easy to adjust the angle and length to match any job requirement.Securely locks into place using 4x knobs.Simple, easy to use and utterly indispensable for accurate cuts and measurements.
  • 【A real headache saver】:Stair Tread Template Set will help you lay out stair treads, risers, and shelving to perfection. The increased accuracy and savings in time will pay for the templates before you finish your next set of stairs. Easy to handle and adjust for the correct angles. Portable and simple.
  • Includes protective case and SR44 silver oxide battery
  • Measures inside, outside, depth, and step values for versatility. With thumb roller. Except 500-500-10, 500-501-10,500-502-10
  • Advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water
  • Digital readout LCD shows inch or metric units for versatility when measuring
  • Measures 0 to 6" (0 to 150mm) in 0.0005" (0.01mm) increments for precision use
  • Large LCD screen & auto off: The large and easy-to-read LCD display helps you get precise results quickly and easily, auto shutdown for saving battery after 5 minutes if without operation
  • Zero setting function: The smart design allows you to set zero with an easy touch of a button and start a new measurement at any point of the scale, ideal for differential measuring
  • Inch/mm conversion: One button quick switch between two units: inch and millimeter, definitely save your time. Made of rugged plastic carbon fiber composites, durable and portable
  • 4 measuring modes: This digital caliper can be used to Measure inside and outside diameter, depth and step with two sets of jaws and a probe. Powered by battery, comes with a pre-installed battery and a spare battery
  • Precise measurement: Measurement range: 0 - 6''/ 0 - 150mm; Resolution: 0.01”/ 0.1mm; Accuracy: ±0.2mm/0.01”. Perfect and accurate caliper measuring tool for household/DIY measurement. Please choose stainless steel digital caliper for more accurate measuring

More Info

Mitutoyo - 611201-541 Steel Rectangular Gage Block, ASME Grade AS-1, 1.0" Length

Search only Mitutoyo brand name
Mitutoyo - 611201-541 Steel Rectangular Gage Block, ASME Grade AS-1, 1.0

Current price: 32.28 USD


Check price and availability


Height: 3.1 Inches

Length: 2.1 Inches

Width: 0.8 Inches

  • 2 Years warranty
  • Meets DIN Standard 862; ISO certified manufacturing
  • USB cable available separately (SPC transfer Inch/mm decimal only).
  • IP54 protection: Water drop and dust resistant
  • Resolution: 0.0005"/0.01mm/1/128" ; Accuracy: 0.001" / 0.02mm; Range: 6"/150mm
  • ★A safe protective package to ensure that it is not vulnerable to impact damage.
  • ★★★Depth Gage can measure the depth of holes, steps and columns more accurately。
  • ★Some people think that this mechanical caliper is not easy to read data, just like a needle watch and an electronic display watch, it is just a habit. This kind of mechanical caliper is the most suitable for the bad working environment without malfunction, and the precision deviation is not easy to occur.
  • ★Surface chrome plating, with sufficient hardness and corrosion resistance.
  • ★0.02mm Accuracy Alloyed Electroplating Chrome Vernier caliper 0-150mm 0-200mm 0-300mm range Locking screw for holding measurement.
  • 【New Verion with Craftsmanship】After May,We have Upgraded and strengthened the welds around every bolts of this Stair Tool.After more than 1,000 tests,they become quality parts that Durable and reusable.All Our Stair Tread Jigs are backed by Lifetime warranty.Simply email us back if our product ever fails you and we'll mail you a new original replacement free of charge.
  • 【Cutting Steps】: 1.assume all of your steps are uneven.Make sure your steps are level in all directions.2. Make sure you measure your overall riser height. 3.use a long straight edge to make sure the edges of your steps line up.4.MARK THE FRONT OF YOUR 1X2 BOARD you use with this Tread Template tool.Follow the steps,your cuts will be turned out perfect.
  • 【Multi-Uses】:The quantity of “Each” includes two pieces as shown, together they make up one tread tool.Manufactured of zinc plated steel to last a lifetime.Perfect for laying out stair treads, risers, and shelving.
  • 【High Quality and Reusable】:This Tread Template are engineered from impact and chemical resistant iron Material,which are very durable and reusable.Very easy to adjust the angle and length to match any job requirement.Securely locks into place using 4x knobs.Simple, easy to use and utterly indispensable for accurate cuts and measurements.
  • 【A real headache saver】:Stair Tread Template Set will help you lay out stair treads, risers, and shelving to perfection. The increased accuracy and savings in time will pay for the templates before you finish your next set of stairs. Easy to handle and adjust for the correct angles. Portable and simple.
  • Includes protective case and SR44 silver oxide battery
  • Measures inside, outside, depth, and step values for versatility. With thumb roller. Except 500-500-10, 500-501-10,500-502-10
  • Advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water
  • Digital readout LCD shows inch or metric units for versatility when measuring
  • Measures 0 to 6" (0 to 150mm) in 0.0005" (0.01mm) increments for precision use
  • Large LCD screen & auto off: The large and easy-to-read LCD display helps you get precise results quickly and easily, auto shutdown for saving battery after 5 minutes if without operation
  • Zero setting function: The smart design allows you to set zero with an easy touch of a button and start a new measurement at any point of the scale, ideal for differential measuring
  • Inch/mm conversion: One button quick switch between two units: inch and millimeter, definitely save your time. Made of rugged plastic carbon fiber composites, durable and portable
  • 4 measuring modes: This digital caliper can be used to Measure inside and outside diameter, depth and step with two sets of jaws and a probe. Powered by battery, comes with a pre-installed battery and a spare battery
  • Precise measurement: Measurement range: 0 - 6''/ 0 - 150mm; Resolution: 0.01”/ 0.1mm; Accuracy: ±0.2mm/0.01”. Perfect and accurate caliper measuring tool for household/DIY measurement. Please choose stainless steel digital caliper for more accurate measuring
  • Identification number etched in block for traceability
  • Nominal length (in inches) indicated with laser-etched, black characters
  • Rectangular base for accurate wringing
  • High-carbon, high-chrome steel provides high hardness and wear-resistance
  • Grade AS-1 gage block supplied with a Mitutoyo certificate of inspection that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 standard for flatness, length, parallelism, and surface finish

More Info

iGaging 20" Brake Drum Caliper Gage Digital Electronic

Search only iGaging brand name
iGaging 20

Current price: 139.95 USD


Check price and availability


  • 2 Years warranty
  • Meets DIN Standard 862; ISO certified manufacturing
  • USB cable available separately (SPC transfer Inch/mm decimal only).
  • IP54 protection: Water drop and dust resistant
  • Resolution: 0.0005"/0.01mm/1/128" ; Accuracy: 0.001" / 0.02mm; Range: 6"/150mm
  • ★A safe protective package to ensure that it is not vulnerable to impact damage.
  • ★★★Depth Gage can measure the depth of holes, steps and columns more accurately。
  • ★Some people think that this mechanical caliper is not easy to read data, just like a needle watch and an electronic display watch, it is just a habit. This kind of mechanical caliper is the most suitable for the bad working environment without malfunction, and the precision deviation is not easy to occur.
  • ★Surface chrome plating, with sufficient hardness and corrosion resistance.
  • ★0.02mm Accuracy Alloyed Electroplating Chrome Vernier caliper 0-150mm 0-200mm 0-300mm range Locking screw for holding measurement.
  • 【New Verion with Craftsmanship】After May,We have Upgraded and strengthened the welds around every bolts of this Stair Tool.After more than 1,000 tests,they become quality parts that Durable and reusable.All Our Stair Tread Jigs are backed by Lifetime warranty.Simply email us back if our product ever fails you and we'll mail you a new original replacement free of charge.
  • 【Cutting Steps】: 1.assume all of your steps are uneven.Make sure your steps are level in all directions.2. Make sure you measure your overall riser height. 3.use a long straight edge to make sure the edges of your steps line up.4.MARK THE FRONT OF YOUR 1X2 BOARD you use with this Tread Template tool.Follow the steps,your cuts will be turned out perfect.
  • 【Multi-Uses】:The quantity of “Each” includes two pieces as shown, together they make up one tread tool.Manufactured of zinc plated steel to last a lifetime.Perfect for laying out stair treads, risers, and shelving.
  • 【High Quality and Reusable】:This Tread Template are engineered from impact and chemical resistant iron Material,which are very durable and reusable.Very easy to adjust the angle and length to match any job requirement.Securely locks into place using 4x knobs.Simple, easy to use and utterly indispensable for accurate cuts and measurements.
  • 【A real headache saver】:Stair Tread Template Set will help you lay out stair treads, risers, and shelving to perfection. The increased accuracy and savings in time will pay for the templates before you finish your next set of stairs. Easy to handle and adjust for the correct angles. Portable and simple.
  • Includes protective case and SR44 silver oxide battery
  • Measures inside, outside, depth, and step values for versatility. With thumb roller. Except 500-500-10, 500-501-10,500-502-10
  • Advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water
  • Digital readout LCD shows inch or metric units for versatility when measuring
  • Measures 0 to 6" (0 to 150mm) in 0.0005" (0.01mm) increments for precision use
  • Large LCD screen & auto off: The large and easy-to-read LCD display helps you get precise results quickly and easily, auto shutdown for saving battery after 5 minutes if without operation
  • Zero setting function: The smart design allows you to set zero with an easy touch of a button and start a new measurement at any point of the scale, ideal for differential measuring
  • Inch/mm conversion: One button quick switch between two units: inch and millimeter, definitely save your time. Made of rugged plastic carbon fiber composites, durable and portable
  • 4 measuring modes: This digital caliper can be used to Measure inside and outside diameter, depth and step with two sets of jaws and a probe. Powered by battery, comes with a pre-installed battery and a spare battery
  • Precise measurement: Measurement range: 0 - 6''/ 0 - 150mm; Resolution: 0.01”/ 0.1mm; Accuracy: ±0.2mm/0.01”. Perfect and accurate caliper measuring tool for household/DIY measurement. Please choose stainless steel digital caliper for more accurate measuring
  • Identification number etched in block for traceability
  • Nominal length (in inches) indicated with laser-etched, black characters
  • Rectangular base for accurate wringing
  • High-carbon, high-chrome steel provides high hardness and wear-resistance
  • Grade AS-1 gage block supplied with a Mitutoyo certificate of inspection that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 standard for flatness, length, parallelism, and surface finish
  • Resolution of .0005 inch/.01mm
  • Preset depth at 1 inch and 1.5 inch
  • 4 inch drum preset, zero set, hold function
  • Inch/metric conversion
  • 4" - 20" / 100mm - 500mm capacity

More Info

Fowler 54-554-611 Internal Electronic Caliper Gage, 0.200-0.590" Measuring Range, 0.0005" Resolution, 0.0008" Accuracy

Search only Fowler brand name
Fowler 54-554-611 Internal Electronic Caliper Gage, 0.200-0.590

Current price: 213.18 USD


Check price and availability


Weight: 0.0440924524 Pounds

  • 2 Years warranty
  • Meets DIN Standard 862; ISO certified manufacturing
  • USB cable available separately (SPC transfer Inch/mm decimal only).
  • IP54 protection: Water drop and dust resistant
  • Resolution: 0.0005"/0.01mm/1/128" ; Accuracy: 0.001" / 0.02mm; Range: 6"/150mm
  • ★A safe protective package to ensure that it is not vulnerable to impact damage.
  • ★★★Depth Gage can measure the depth of holes, steps and columns more accurately。
  • ★Some people think that this mechanical caliper is not easy to read data, just like a needle watch and an electronic display watch, it is just a habit. This kind of mechanical caliper is the most suitable for the bad working environment without malfunction, and the precision deviation is not easy to occur.
  • ★Surface chrome plating, with sufficient hardness and corrosion resistance.
  • ★0.02mm Accuracy Alloyed Electroplating Chrome Vernier caliper 0-150mm 0-200mm 0-300mm range Locking screw for holding measurement.
  • 【New Verion with Craftsmanship】After May,We have Upgraded and strengthened the welds around every bolts of this Stair Tool.After more than 1,000 tests,they become quality parts that Durable and reusable.All Our Stair Tread Jigs are backed by Lifetime warranty.Simply email us back if our product ever fails you and we'll mail you a new original replacement free of charge.
  • 【Cutting Steps】: 1.assume all of your steps are uneven.Make sure your steps are level in all directions.2. Make sure you measure your overall riser height. 3.use a long straight edge to make sure the edges of your steps line up.4.MARK THE FRONT OF YOUR 1X2 BOARD you use with this Tread Template tool.Follow the steps,your cuts will be turned out perfect.
  • 【Multi-Uses】:The quantity of “Each” includes two pieces as shown, together they make up one tread tool.Manufactured of zinc plated steel to last a lifetime.Perfect for laying out stair treads, risers, and shelving.
  • 【High Quality and Reusable】:This Tread Template are engineered from impact and chemical resistant iron Material,which are very durable and reusable.Very easy to adjust the angle and length to match any job requirement.Securely locks into place using 4x knobs.Simple, easy to use and utterly indispensable for accurate cuts and measurements.
  • 【A real headache saver】:Stair Tread Template Set will help you lay out stair treads, risers, and shelving to perfection. The increased accuracy and savings in time will pay for the templates before you finish your next set of stairs. Easy to handle and adjust for the correct angles. Portable and simple.
  • Includes protective case and SR44 silver oxide battery
  • Measures inside, outside, depth, and step values for versatility. With thumb roller. Except 500-500-10, 500-501-10,500-502-10
  • Advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water
  • Digital readout LCD shows inch or metric units for versatility when measuring
  • Measures 0 to 6" (0 to 150mm) in 0.0005" (0.01mm) increments for precision use
  • Large LCD screen & auto off: The large and easy-to-read LCD display helps you get precise results quickly and easily, auto shutdown for saving battery after 5 minutes if without operation
  • Zero setting function: The smart design allows you to set zero with an easy touch of a button and start a new measurement at any point of the scale, ideal for differential measuring
  • Inch/mm conversion: One button quick switch between two units: inch and millimeter, definitely save your time. Made of rugged plastic carbon fiber composites, durable and portable
  • 4 measuring modes: This digital caliper can be used to Measure inside and outside diameter, depth and step with two sets of jaws and a probe. Powered by battery, comes with a pre-installed battery and a spare battery
  • Precise measurement: Measurement range: 0 - 6''/ 0 - 150mm; Resolution: 0.01”/ 0.1mm; Accuracy: ±0.2mm/0.01”. Perfect and accurate caliper measuring tool for household/DIY measurement. Please choose stainless steel digital caliper for more accurate measuring
  • Identification number etched in block for traceability
  • Nominal length (in inches) indicated with laser-etched, black characters
  • Rectangular base for accurate wringing
  • High-carbon, high-chrome steel provides high hardness and wear-resistance
  • Grade AS-1 gage block supplied with a Mitutoyo certificate of inspection that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 standard for flatness, length, parallelism, and surface finish
  • Resolution of .0005 inch/.01mm
  • Preset depth at 1 inch and 1.5 inch
  • 4 inch drum preset, zero set, hold function
  • Inch/metric conversion
  • 4" - 20" / 100mm - 500mm capacity
  • Direct RS-232 output for data transfer
  • Absolute and incremental modes for taking intermediate or differential measurements
  • Digital, single-value readout LCD shows inch and metric units for versatility when measuring
  • Plastic body, steel arms, and hardened steel contact point for durability
  • Accuracy of 0.0008"/0.02mm and 0.0005"/0.01mm resolution for precise measurements

More Info

QISF Multi-Purpose 2 Pack Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool, 51 Pcs America SAE Type + 58 Pcs Metric & America SAE Type & British Whitworth

Search only QISF brand name
QISF Multi-Purpose 2 Pack Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool, 51 Pcs America SAE Type + 58 Pcs Metric & America SAE Type & British Whitworth

Current price: 19.84 USD


Check price and availability


  • 2 Years warranty
  • Meets DIN Standard 862; ISO certified manufacturing
  • USB cable available separately (SPC transfer Inch/mm decimal only).
  • IP54 protection: Water drop and dust resistant
  • Resolution: 0.0005"/0.01mm/1/128" ; Accuracy: 0.001" / 0.02mm; Range: 6"/150mm
  • ★A safe protective package to ensure that it is not vulnerable to impact damage.
  • ★★★Depth Gage can measure the depth of holes, steps and columns more accurately。
  • ★Some people think that this mechanical caliper is not easy to read data, just like a needle watch and an electronic display watch, it is just a habit. This kind of mechanical caliper is the most suitable for the bad working environment without malfunction, and the precision deviation is not easy to occur.
  • ★Surface chrome plating, with sufficient hardness and corrosion resistance.
  • ★0.02mm Accuracy Alloyed Electroplating Chrome Vernier caliper 0-150mm 0-200mm 0-300mm range Locking screw for holding measurement.
  • 【New Verion with Craftsmanship】After May,We have Upgraded and strengthened the welds around every bolts of this Stair Tool.After more than 1,000 tests,they become quality parts that Durable and reusable.All Our Stair Tread Jigs are backed by Lifetime warranty.Simply email us back if our product ever fails you and we'll mail you a new original replacement free of charge.
  • 【Cutting Steps】: 1.assume all of your steps are uneven.Make sure your steps are level in all directions.2. Make sure you measure your overall riser height. 3.use a long straight edge to make sure the edges of your steps line up.4.MARK THE FRONT OF YOUR 1X2 BOARD you use with this Tread Template tool.Follow the steps,your cuts will be turned out perfect.
  • 【Multi-Uses】:The quantity of “Each” includes two pieces as shown, together they make up one tread tool.Manufactured of zinc plated steel to last a lifetime.Perfect for laying out stair treads, risers, and shelving.
  • 【High Quality and Reusable】:This Tread Template are engineered from impact and chemical resistant iron Material,which are very durable and reusable.Very easy to adjust the angle and length to match any job requirement.Securely locks into place using 4x knobs.Simple, easy to use and utterly indispensable for accurate cuts and measurements.
  • 【A real headache saver】:Stair Tread Template Set will help you lay out stair treads, risers, and shelving to perfection. The increased accuracy and savings in time will pay for the templates before you finish your next set of stairs. Easy to handle and adjust for the correct angles. Portable and simple.
  • Includes protective case and SR44 silver oxide battery
  • Measures inside, outside, depth, and step values for versatility. With thumb roller. Except 500-500-10, 500-501-10,500-502-10
  • Advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water
  • Digital readout LCD shows inch or metric units for versatility when measuring
  • Measures 0 to 6" (0 to 150mm) in 0.0005" (0.01mm) increments for precision use
  • Large LCD screen & auto off: The large and easy-to-read LCD display helps you get precise results quickly and easily, auto shutdown for saving battery after 5 minutes if without operation
  • Zero setting function: The smart design allows you to set zero with an easy touch of a button and start a new measurement at any point of the scale, ideal for differential measuring
  • Inch/mm conversion: One button quick switch between two units: inch and millimeter, definitely save your time. Made of rugged plastic carbon fiber composites, durable and portable
  • 4 measuring modes: This digital caliper can be used to Measure inside and outside diameter, depth and step with two sets of jaws and a probe. Powered by battery, comes with a pre-installed battery and a spare battery
  • Precise measurement: Measurement range: 0 - 6''/ 0 - 150mm; Resolution: 0.01”/ 0.1mm; Accuracy: ±0.2mm/0.01”. Perfect and accurate caliper measuring tool for household/DIY measurement. Please choose stainless steel digital caliper for more accurate measuring
  • Identification number etched in block for traceability
  • Nominal length (in inches) indicated with laser-etched, black characters
  • Rectangular base for accurate wringing
  • High-carbon, high-chrome steel provides high hardness and wear-resistance
  • Grade AS-1 gage block supplied with a Mitutoyo certificate of inspection that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 standard for flatness, length, parallelism, and surface finish
  • Resolution of .0005 inch/.01mm
  • Preset depth at 1 inch and 1.5 inch
  • 4 inch drum preset, zero set, hold function
  • Inch/metric conversion
  • 4" - 20" / 100mm - 500mm capacity
  • Direct RS-232 output for data transfer
  • Absolute and incremental modes for taking intermediate or differential measurements
  • Digital, single-value readout LCD shows inch and metric units for versatility when measuring
  • Plastic body, steel arms, and hardened steel contact point for durability
  • Accuracy of 0.0008"/0.02mm and 0.0005"/0.01mm resolution for precise measurements
  • 【Package】-- 1 x 58Pcs Blade Metric & America SAE Type & British Whitworth; 1 x 51Pcs Blade America SAE Type
  • 【Size】-- 51 Pcs America SAE Type Measuring range: 4-84;/ 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28
  • 【Material】--Stainless steel and chrome finish, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability
  • 【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size;Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size
  • 【Function】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool; 51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth

More Info

Handy Sliding Gauge Brass Vernier Caliper Ruler Measuring Tool Double Scales mm/inch Mini Brass Pocket Ruler 80mm 100mm Optional (100mm)

Search only Walfront brand name
Handy Sliding Gauge Brass Vernier Caliper Ruler Measuring Tool Double Scales mm/inch Mini Brass Pocket Ruler 80mm 100mm Optional (100mm)

Current price: 9.79 USD


Check price and availability


Height: 0.393700787 Inches

Length: 3.93700787 Inches

Width: 0.787401574 Inches

Weight: 0.0881849048 Pounds

  • 2 Years warranty
  • Meets DIN Standard 862; ISO certified manufacturing
  • USB cable available separately (SPC transfer Inch/mm decimal only).
  • IP54 protection: Water drop and dust resistant
  • Resolution: 0.0005"/0.01mm/1/128" ; Accuracy: 0.001" / 0.02mm; Range: 6"/150mm
  • ★A safe protective package to ensure that it is not vulnerable to impact damage.
  • ★★★Depth Gage can measure the depth of holes, steps and columns more accurately。
  • ★Some people think that this mechanical caliper is not easy to read data, just like a needle watch and an electronic display watch, it is just a habit. This kind of mechanical caliper is the most suitable for the bad working environment without malfunction, and the precision deviation is not easy to occur.
  • ★Surface chrome plating, with sufficient hardness and corrosion resistance.
  • ★0.02mm Accuracy Alloyed Electroplating Chrome Vernier caliper 0-150mm 0-200mm 0-300mm range Locking screw for holding measurement.
  • 【New Verion with Craftsmanship】After May,We have Upgraded and strengthened the welds around every bolts of this Stair Tool.After more than 1,000 tests,they become quality parts that Durable and reusable.All Our Stair Tread Jigs are backed by Lifetime warranty.Simply email us back if our product ever fails you and we'll mail you a new original replacement free of charge.
  • 【Cutting Steps】: 1.assume all of your steps are uneven.Make sure your steps are level in all directions.2. Make sure you measure your overall riser height. 3.use a long straight edge to make sure the edges of your steps line up.4.MARK THE FRONT OF YOUR 1X2 BOARD you use with this Tread Template tool.Follow the steps,your cuts will be turned out perfect.
  • 【Multi-Uses】:The quantity of “Each” includes two pieces as shown, together they make up one tread tool.Manufactured of zinc plated steel to last a lifetime.Perfect for laying out stair treads, risers, and shelving.
  • 【High Quality and Reusable】:This Tread Template are engineered from impact and chemical resistant iron Material,which are very durable and reusable.Very easy to adjust the angle and length to match any job requirement.Securely locks into place using 4x knobs.Simple, easy to use and utterly indispensable for accurate cuts and measurements.
  • 【A real headache saver】:Stair Tread Template Set will help you lay out stair treads, risers, and shelving to perfection. The increased accuracy and savings in time will pay for the templates before you finish your next set of stairs. Easy to handle and adjust for the correct angles. Portable and simple.
  • Includes protective case and SR44 silver oxide battery
  • Measures inside, outside, depth, and step values for versatility. With thumb roller. Except 500-500-10, 500-501-10,500-502-10
  • Advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water
  • Digital readout LCD shows inch or metric units for versatility when measuring
  • Measures 0 to 6" (0 to 150mm) in 0.0005" (0.01mm) increments for precision use
  • Large LCD screen & auto off: The large and easy-to-read LCD display helps you get precise results quickly and easily, auto shutdown for saving battery after 5 minutes if without operation
  • Zero setting function: The smart design allows you to set zero with an easy touch of a button and start a new measurement at any point of the scale, ideal for differential measuring
  • Inch/mm conversion: One button quick switch between two units: inch and millimeter, definitely save your time. Made of rugged plastic carbon fiber composites, durable and portable
  • 4 measuring modes: This digital caliper can be used to Measure inside and outside diameter, depth and step with two sets of jaws and a probe. Powered by battery, comes with a pre-installed battery and a spare battery
  • Precise measurement: Measurement range: 0 - 6''/ 0 - 150mm; Resolution: 0.01”/ 0.1mm; Accuracy: ±0.2mm/0.01”. Perfect and accurate caliper measuring tool for household/DIY measurement. Please choose stainless steel digital caliper for more accurate measuring
  • Identification number etched in block for traceability
  • Nominal length (in inches) indicated with laser-etched, black characters
  • Rectangular base for accurate wringing
  • High-carbon, high-chrome steel provides high hardness and wear-resistance
  • Grade AS-1 gage block supplied with a Mitutoyo certificate of inspection that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 standard for flatness, length, parallelism, and surface finish
  • Resolution of .0005 inch/.01mm
  • Preset depth at 1 inch and 1.5 inch
  • 4 inch drum preset, zero set, hold function
  • Inch/metric conversion
  • 4" - 20" / 100mm - 500mm capacity
  • Direct RS-232 output for data transfer
  • Absolute and incremental modes for taking intermediate or differential measurements
  • Digital, single-value readout LCD shows inch and metric units for versatility when measuring
  • Plastic body, steel arms, and hardened steel contact point for durability
  • Accuracy of 0.0008"/0.02mm and 0.0005"/0.01mm resolution for precise measurements
  • 【Package】-- 1 x 58Pcs Blade Metric & America SAE Type & British Whitworth; 1 x 51Pcs Blade America SAE Type
  • 【Size】-- 51 Pcs America SAE Type Measuring range: 4-84;/ 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28
  • 【Material】--Stainless steel and chrome finish, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability
  • 【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size;Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size
  • 【Function】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool; 51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth
  • With high precision, it would be a great measuring tool for your daily use.
  • Light weight and convenient to carry, you can simply keep it in your bag.
  • Double scales design; there are both mm and inch scales on the vernier caliper.
  • Made of high quality brass, this vernier caliper is strong, non-magnetic and durable.
  • This is a vintage style sliding gauge vernier caliper ruler of beautiful appearance.

More Info

1    2    3    4    5    6    7    8    9    10