Best Brazing Rods. Reviews June, 2021

Bernzomatic AL3 Aluminum Brazing/Welding Rods with 12-Inch Rods of Working Temperature 720-750 Degrees, 2-Piece

Search only Bernzomatic brand name
Bernzomatic AL3 Aluminum Brazing/Welding Rods with 12-Inch Rods of Working Temperature 720-750 Degrees, 2-Piece

Current price: 4.08 USD

Saving: $0.81 (17%)


Check price and availability


Height: 14.5 Inches

Length: 2 Inches

Width: 0.2 Inches

Weight: 0.33 Pounds

  • Made in United States
  • Working temp: 700-750 degrees
  • Brinnell hardness: 100
  • Package Weight: 0.01 pounds

More Info

Simple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 10 Rods

Search only SIMPLE WELDING RODS X brand name
Simple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 10 Rods

Current price: 21.95 USD


Check price and availability


  • Made in United States
  • Working temp: 700-750 degrees
  • Brinnell hardness: 100
  • Package Weight: 0.01 pounds
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch.
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do.
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast.
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily.
  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier.

More Info

US Forge Welding Gas Welding Rods Flux Coated Low Fuming Bronze Brazing Rod 1/8-Inch by 18-Inch .8-Pound #02232

Search only US Forge brand name
US Forge Welding Gas Welding Rods Flux Coated Low Fuming Bronze Brazing Rod 1/8-Inch by 18-Inch .8-Pound #02232

Current price: 19.48 USD


Check price and availability


Height: 1 Inches

Length: 20 Inches

Width: 4 Inches

Warranty: 90 days

  • Made in United States
  • Working temp: 700-750 degrees
  • Brinnell hardness: 100
  • Package Weight: 0.01 pounds
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch.
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do.
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast.
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily.
  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier.
  • For use with lawn equipment, sheet metal, tanks
  • No flux required
  • For use with oxy-acetylene torch only
  • For general purpose brazing rod for repair of most ferrous and or non-ferrous metals

More Info

KKmoon 20PCS Brass Welding Brazing Rods Electrode 1.6mm333mm Soldering Rod No Need Solder Powder

Search only KKmoon brand name
KKmoon 20PCS Brass Welding Brazing Rods Electrode 1.6mm333mm Soldering Rod No Need Solder Powder

Current price: 13.99 USD


Check price and availability


  • Made in United States
  • Working temp: 700-750 degrees
  • Brinnell hardness: 100
  • Package Weight: 0.01 pounds
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch.
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do.
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast.
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily.
  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier.
  • For use with lawn equipment, sheet metal, tanks
  • No flux required
  • For use with oxy-acetylene torch only
  • For general purpose brazing rod for repair of most ferrous and or non-ferrous metals
  • ▲ Light weight, small volume, very easy to carry.
  • ▲ No Need Solder Powder - You don't have to use other flux powder with brass as the welding core and coating as the salt base. Very convenient and easy to weld.
  • ▲ Good mechanical properties, good wear resistance, excellent fluidity, suitable for temperatureless cold welding.
  • ▲ Containing a small amount of tin and silicon, tin can improve the fluidity of the wire, and silicon can effectively control the evaporation of zinc.
  • ▲ It can weld copper, steel, and hard alloy materials at temperatures ranging from 890℃ to 905℃.

More Info

Bernzomatic PC3 Copper-Phosphorous Brazing/Welding Rods, 3-Piece

Search only Bernzomatic brand name
Bernzomatic PC3 Copper-Phosphorous Brazing/Welding Rods, 3-Piece

Current price: 8.18 USD


Check price and availability


Height: 14.5 Inches

Length: 2 Inches

Width: 0.2 Inches

Weight: 0.05 Pounds

  • Made in United States
  • Working temp: 700-750 degrees
  • Brinnell hardness: 100
  • Package Weight: 0.01 pounds
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch.
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do.
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast.
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily.
  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier.
  • For use with lawn equipment, sheet metal, tanks
  • No flux required
  • For use with oxy-acetylene torch only
  • For general purpose brazing rod for repair of most ferrous and or non-ferrous metals
  • ▲ Light weight, small volume, very easy to carry.
  • ▲ No Need Solder Powder - You don't have to use other flux powder with brass as the welding core and coating as the salt base. Very convenient and easy to weld.
  • ▲ Good mechanical properties, good wear resistance, excellent fluidity, suitable for temperatureless cold welding.
  • ▲ Containing a small amount of tin and silicon, tin can improve the fluidity of the wire, and silicon can effectively control the evaporation of zinc.
  • ▲ It can weld copper, steel, and hard alloy materials at temperatures ranging from 890℃ to 905℃.
  • Joins copper to copper without flux, or copper to copper alloys (brass, and bronze)
  • Working temp: 1,310-1,475-Degree farenheit
  • Tensile strength: 40,000 psi
  • Contains 12-Inch rods
  • Copper-phosphorous brazing/welding rods ideal for use in refrigeration, electrical and plumbing jobs

More Info

RBCuZn-C - LFB Bare Bronze Brazing Rod - 36" x 1/8" (1 Lb)

Search only TGB brand name
RBCuZn-C - LFB Bare Bronze Brazing Rod - 36

Current price: 24.9 USD


Check price and availability


Weight: 2 Pounds

  • Made in United States
  • Working temp: 700-750 degrees
  • Brinnell hardness: 100
  • Package Weight: 0.01 pounds
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch.
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do.
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast.
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily.
  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier.
  • For use with lawn equipment, sheet metal, tanks
  • No flux required
  • For use with oxy-acetylene torch only
  • For general purpose brazing rod for repair of most ferrous and or non-ferrous metals
  • ▲ Light weight, small volume, very easy to carry.
  • ▲ No Need Solder Powder - You don't have to use other flux powder with brass as the welding core and coating as the salt base. Very convenient and easy to weld.
  • ▲ Good mechanical properties, good wear resistance, excellent fluidity, suitable for temperatureless cold welding.
  • ▲ Containing a small amount of tin and silicon, tin can improve the fluidity of the wire, and silicon can effectively control the evaporation of zinc.
  • ▲ It can weld copper, steel, and hard alloy materials at temperatures ranging from 890℃ to 905℃.
  • Joins copper to copper without flux, or copper to copper alloys (brass, and bronze)
  • Working temp: 1,310-1,475-Degree farenheit
  • Tensile strength: 40,000 psi
  • Contains 12-Inch rods
  • Copper-phosphorous brazing/welding rods ideal for use in refrigeration, electrical and plumbing jobs
  • Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb
  • Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4"
  • ***READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***
  • A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added; galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service; high silicon level promotes low fuming
  • LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F)

More Info

Lucas-Milhaupt 95150 Sil-Fos 15 Brazing Alloy 28 Rod Tube

Search only Lucas Milhaupt brand name
Lucas-Milhaupt 95150 Sil-Fos 15 Brazing Alloy 28 Rod Tube

Current price: 119.98 USD


Check price and availability


Height: 1 Inches

Length: 0.01 Inches

Width: 0.75 Inches

  • Made in United States
  • Working temp: 700-750 degrees
  • Brinnell hardness: 100
  • Package Weight: 0.01 pounds
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch.
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do.
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast.
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily.
  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier.
  • For use with lawn equipment, sheet metal, tanks
  • No flux required
  • For use with oxy-acetylene torch only
  • For general purpose brazing rod for repair of most ferrous and or non-ferrous metals
  • ▲ Light weight, small volume, very easy to carry.
  • ▲ No Need Solder Powder - You don't have to use other flux powder with brass as the welding core and coating as the salt base. Very convenient and easy to weld.
  • ▲ Good mechanical properties, good wear resistance, excellent fluidity, suitable for temperatureless cold welding.
  • ▲ Containing a small amount of tin and silicon, tin can improve the fluidity of the wire, and silicon can effectively control the evaporation of zinc.
  • ▲ It can weld copper, steel, and hard alloy materials at temperatures ranging from 890℃ to 905℃.
  • Joins copper to copper without flux, or copper to copper alloys (brass, and bronze)
  • Working temp: 1,310-1,475-Degree farenheit
  • Tensile strength: 40,000 psi
  • Contains 12-Inch rods
  • Copper-phosphorous brazing/welding rods ideal for use in refrigeration, electrical and plumbing jobs
  • Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb
  • Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4"
  • ***READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***
  • A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added; galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service; high silicon level promotes low fuming
  • LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F)
  • High joint ductility
  • For use where close fit-ups cannot be maintained
  • Medium Temperature
  • Copper to Copper Brazing
  • Solidus: 1190°F / Flow: 1325°F / Liquidus: 1495°F

More Info

Alumaloy 20 Rods - USA Made, As Seen on TV, 1/8" x 18" Simple Welding Rods, Aluminum Brazing/Welding Rods, Aluminum Repair

Search only Alumaloy brand name
Alumaloy 20 Rods - USA Made, As Seen on TV, 1/8

Current price: 25.99 USD


Check price and availability


  • Made in United States
  • Working temp: 700-750 degrees
  • Brinnell hardness: 100
  • Package Weight: 0.01 pounds
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch.
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do.
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast.
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily.
  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier.
  • For use with lawn equipment, sheet metal, tanks
  • No flux required
  • For use with oxy-acetylene torch only
  • For general purpose brazing rod for repair of most ferrous and or non-ferrous metals
  • ▲ Light weight, small volume, very easy to carry.
  • ▲ No Need Solder Powder - You don't have to use other flux powder with brass as the welding core and coating as the salt base. Very convenient and easy to weld.
  • ▲ Good mechanical properties, good wear resistance, excellent fluidity, suitable for temperatureless cold welding.
  • ▲ Containing a small amount of tin and silicon, tin can improve the fluidity of the wire, and silicon can effectively control the evaporation of zinc.
  • ▲ It can weld copper, steel, and hard alloy materials at temperatures ranging from 890℃ to 905℃.
  • Joins copper to copper without flux, or copper to copper alloys (brass, and bronze)
  • Working temp: 1,310-1,475-Degree farenheit
  • Tensile strength: 40,000 psi
  • Contains 12-Inch rods
  • Copper-phosphorous brazing/welding rods ideal for use in refrigeration, electrical and plumbing jobs
  • Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb
  • Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4"
  • ***READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***
  • A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added; galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service; high silicon level promotes low fuming
  • LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F)
  • High joint ductility
  • For use where close fit-ups cannot be maintained
  • Medium Temperature
  • Copper to Copper Brazing
  • Solidus: 1190°F / Flow: 1325°F / Liquidus: 1495°F
  • MADE IN THE USA: Alumaloy is an environmentally friendly product. Giving you the ability to repair more and throw out less. Saving money and the planet at the same time. Unlike other specialty repair rods, Alumaloy contains no lead, no tin and no cadmium. Alumaloy is proudly made in the United States of America!
  • PERMANENT: Alumaloy is specially formulated to make strong permanent repairs that can last a lifetime. Specs include: Tensile Strength lbs/ sq.in 39,000, Compression Str.lb/sq.in 60,000, shelf life is indefinite. Alumaloy is a welcome addition to any tool box and 100% guaranteed to work for you. Each rod is approximately 1/8" x 18" long.
  • NO WORRYING: Alumaloy melts at 728 degrees Fahrenheit giving you the ability to repair the thinnest to the thickest metals without worrying about war-page or distortion. Alumaloy even repairs pot metal; one of the most difficult non ferrous metals in the world to repair!
  • EASY TO USE: Alumaloy is as EASY as 1-2-3. Simply clean the base metal, heat the base metal, NOT THE Alumaloy ROD, repair your way into hundreds of dollars of savings. Please refer to instructional video.
  • REPAIRS: With rods twice as long as the competition, Alumaloy repairs or fabricates virtually anything made of aluminum, pot metal, or galvanized steel. Use something as simple as a propane torch on up. No Flux needed! You can repair boats, props, storm doors, gutters, antiques, tools, condensers, molds, rims, air conditioning lines, refrigeration coils, bell housing, pontoons, transmission cases, and so much more.

More Info

Forney 48300 Bare Brass Gas Brazing Rod, 3/32-Inch-by-18-Inch, 10-Rods

Search only Forney brand name
Forney 48300 Bare Brass Gas Brazing Rod, 3/32-Inch-by-18-Inch, 10-Rods

Current price: 17.34 USD


Check price and availability


Height: 0.75 Inches

Length: 19 Inches

Width: 0.75 Inches

Weight: 0.45 Pounds

Warranty: 90 day warranty against manufacturer defects

  • Made in United States
  • Working temp: 700-750 degrees
  • Brinnell hardness: 100
  • Package Weight: 0.01 pounds
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch.
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do.
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast.
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily.
  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier.
  • For use with lawn equipment, sheet metal, tanks
  • No flux required
  • For use with oxy-acetylene torch only
  • For general purpose brazing rod for repair of most ferrous and or non-ferrous metals
  • ▲ Light weight, small volume, very easy to carry.
  • ▲ No Need Solder Powder - You don't have to use other flux powder with brass as the welding core and coating as the salt base. Very convenient and easy to weld.
  • ▲ Good mechanical properties, good wear resistance, excellent fluidity, suitable for temperatureless cold welding.
  • ▲ Containing a small amount of tin and silicon, tin can improve the fluidity of the wire, and silicon can effectively control the evaporation of zinc.
  • ▲ It can weld copper, steel, and hard alloy materials at temperatures ranging from 890℃ to 905℃.
  • Joins copper to copper without flux, or copper to copper alloys (brass, and bronze)
  • Working temp: 1,310-1,475-Degree farenheit
  • Tensile strength: 40,000 psi
  • Contains 12-Inch rods
  • Copper-phosphorous brazing/welding rods ideal for use in refrigeration, electrical and plumbing jobs
  • Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb
  • Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4"
  • ***READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***
  • A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added; galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service; high silicon level promotes low fuming
  • LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F)
  • High joint ductility
  • For use where close fit-ups cannot be maintained
  • Medium Temperature
  • Copper to Copper Brazing
  • Solidus: 1190°F / Flow: 1325°F / Liquidus: 1495°F
  • MADE IN THE USA: Alumaloy is an environmentally friendly product. Giving you the ability to repair more and throw out less. Saving money and the planet at the same time. Unlike other specialty repair rods, Alumaloy contains no lead, no tin and no cadmium. Alumaloy is proudly made in the United States of America!
  • PERMANENT: Alumaloy is specially formulated to make strong permanent repairs that can last a lifetime. Specs include: Tensile Strength lbs/ sq.in 39,000, Compression Str.lb/sq.in 60,000, shelf life is indefinite. Alumaloy is a welcome addition to any tool box and 100% guaranteed to work for you. Each rod is approximately 1/8" x 18" long.
  • NO WORRYING: Alumaloy melts at 728 degrees Fahrenheit giving you the ability to repair the thinnest to the thickest metals without worrying about war-page or distortion. Alumaloy even repairs pot metal; one of the most difficult non ferrous metals in the world to repair!
  • EASY TO USE: Alumaloy is as EASY as 1-2-3. Simply clean the base metal, heat the base metal, NOT THE Alumaloy ROD, repair your way into hundreds of dollars of savings. Please refer to instructional video.
  • REPAIRS: With rods twice as long as the competition, Alumaloy repairs or fabricates virtually anything made of aluminum, pot metal, or galvanized steel. Use something as simple as a propane torch on up. No Flux needed! You can repair boats, props, storm doors, gutters, antiques, tools, condensers, molds, rims, air conditioning lines, refrigeration coils, bell housing, pontoons, transmission cases, and so much more.
  • Melting point is 1620 degrees Fahrenheit
  • Flux is required
  • Balanced zinc and copper alloy
  • Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings
  • Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane torch set up

More Info

20Pcs Copper Welding Rod Selffluxing Brazing Round Welding Rod Low Temperature Welding Consumables for Air Conditioner Refrigerators

Search only Oumefar brand name
20Pcs Copper Welding Rod Selffluxing Brazing Round Welding Rod Low Temperature Welding Consumables for Air Conditioner Refrigerators

Current price: 17.19 USD


Check price and availability


  • Made in United States
  • Working temp: 700-750 degrees
  • Brinnell hardness: 100
  • Package Weight: 0.01 pounds
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch.
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do.
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast.
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily.
  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier.
  • For use with lawn equipment, sheet metal, tanks
  • No flux required
  • For use with oxy-acetylene torch only
  • For general purpose brazing rod for repair of most ferrous and or non-ferrous metals
  • ▲ Light weight, small volume, very easy to carry.
  • ▲ No Need Solder Powder - You don't have to use other flux powder with brass as the welding core and coating as the salt base. Very convenient and easy to weld.
  • ▲ Good mechanical properties, good wear resistance, excellent fluidity, suitable for temperatureless cold welding.
  • ▲ Containing a small amount of tin and silicon, tin can improve the fluidity of the wire, and silicon can effectively control the evaporation of zinc.
  • ▲ It can weld copper, steel, and hard alloy materials at temperatures ranging from 890℃ to 905℃.
  • Joins copper to copper without flux, or copper to copper alloys (brass, and bronze)
  • Working temp: 1,310-1,475-Degree farenheit
  • Tensile strength: 40,000 psi
  • Contains 12-Inch rods
  • Copper-phosphorous brazing/welding rods ideal for use in refrigeration, electrical and plumbing jobs
  • Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb
  • Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4"
  • ***READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***
  • A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added; galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service; high silicon level promotes low fuming
  • LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F)
  • High joint ductility
  • For use where close fit-ups cannot be maintained
  • Medium Temperature
  • Copper to Copper Brazing
  • Solidus: 1190°F / Flow: 1325°F / Liquidus: 1495°F
  • MADE IN THE USA: Alumaloy is an environmentally friendly product. Giving you the ability to repair more and throw out less. Saving money and the planet at the same time. Unlike other specialty repair rods, Alumaloy contains no lead, no tin and no cadmium. Alumaloy is proudly made in the United States of America!
  • PERMANENT: Alumaloy is specially formulated to make strong permanent repairs that can last a lifetime. Specs include: Tensile Strength lbs/ sq.in 39,000, Compression Str.lb/sq.in 60,000, shelf life is indefinite. Alumaloy is a welcome addition to any tool box and 100% guaranteed to work for you. Each rod is approximately 1/8" x 18" long.
  • NO WORRYING: Alumaloy melts at 728 degrees Fahrenheit giving you the ability to repair the thinnest to the thickest metals without worrying about war-page or distortion. Alumaloy even repairs pot metal; one of the most difficult non ferrous metals in the world to repair!
  • EASY TO USE: Alumaloy is as EASY as 1-2-3. Simply clean the base metal, heat the base metal, NOT THE Alumaloy ROD, repair your way into hundreds of dollars of savings. Please refer to instructional video.
  • REPAIRS: With rods twice as long as the competition, Alumaloy repairs or fabricates virtually anything made of aluminum, pot metal, or galvanized steel. Use something as simple as a propane torch on up. No Flux needed! You can repair boats, props, storm doors, gutters, antiques, tools, condensers, molds, rims, air conditioning lines, refrigeration coils, bell housing, pontoons, transmission cases, and so much more.
  • Melting point is 1620 degrees Fahrenheit
  • Flux is required
  • Balanced zinc and copper alloy
  • Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings
  • Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane torch set up
  • ★Regulatory Compliance: This welder rod is entitled with high performance according to strict rule. The rod is designed and manufactured according to international standard, strictly follow factory quality control
  • ★Stable Working Performance: This round phosphor copper welding rod adopt phosphor copper material, has stable working performance and is widely used in various MIG welding equipment
  • ★Extensive Applications: Our round welding rod is suitable for electromechanical instrument industry. And it is mainly used for refrigerator copper tube, air conditioner copper tube welding, copper product welding
  • ★Good Fluidity & Easily Use: Standard processing with 2mm diameter, the low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space
  • ★Package Include: The package includes 20pcs welding rods, which is convenient to replace. Such economical and practical welding rod kit is commonly used for welding copper tubes of air conditioners and refrigerators

More Info

1    2    3    4    5    6    7    8    9    10