Best Ball Peen Hammers. TEKTON brand. New releases 2021

TEKTON 16 oz. Ball Peen Hammer | 30403

More from Industrial & Scientific
Search only TEKTON brand name
TEKTON 16 oz. Ball Peen Hammer | 30403

Current price: 15.52 USD


Check price and availability


Height: 1.1 Inches

Length: 12.8 Inches

Width: 4.3 Inches

Warranty: Always Guaranteed: [email protected]

  • Permanent head-to-handle epoxy bond will not loosen over time
  • Forged and polished steel head
  • Soft and comfortable, non-slip rubber grip
  • Exterior poly jacket protects handle core from missed strikes
  • High-strength fiberglass handle core helps absorb vibrations

More Info

TEKTON 26 oz. Ball Peen Dead Blow Hammer | HDB50026

More from Industrial & Scientific
Search only TEKTON brand name
TEKTON 26 oz. Ball Peen Dead Blow Hammer | HDB50026

Current price: 45 USD


Check price and availability


Height: 1.3 Inches

Length: 12.3 Inches

Width: 4.2 Inches

Weight: 1.63 Pounds

Warranty: No time limits, no receipts: tekton.com/tool-help

  • Permanent head-to-handle epoxy bond will not loosen over time
  • Forged and polished steel head
  • Soft and comfortable, non-slip rubber grip
  • Exterior poly jacket protects handle core from missed strikes
  • High-strength fiberglass handle core helps absorb vibrations
  • Made in USA
  • The ball peen striking face is ideal for shaping sheet metal and peening rivets
  • The flat striking face is ideal for driving punches or cold chisels, flattening sheet metal, and aligning heavy parts for assembly or welding
  • Striking faces are made of 4140 Chromium-Molybdenum steel, hardened to HRC 52
  • The contoured handle, with its textured surface and flared base, provides a comfortable, nonslip grip for hammering
  • The thick outer jacket is made from hot cast polyurethane that's highly resistant to chipping, cracking, and tearing
  • Steel shot flows smoothly without sticking or clumping and won't degrade over time
  • The shot-filled head reduces post-strike rebound, allowing for better controlled hits to the workpiece

More Info

TEKTON 3 lb. Sledge Hammer | 31103

More from Industrial & Scientific
Search only TEKTON brand name
TEKTON 3 lb. Sledge Hammer | 31103

Current price: 19.4 USD


Check price and availability


Height: 1.7 Inches

Length: 15.3 Inches

Width: 4.8 Inches

Weight: 2.20462262 Pounds

Warranty: Always Guaranteed: [email protected]

  • Permanent head-to-handle epoxy bond will not loosen over time
  • Forged and polished steel head
  • Soft and comfortable, non-slip rubber grip
  • Exterior poly jacket protects handle core from missed strikes
  • High-strength fiberglass handle core helps absorb vibrations
  • Made in USA
  • The ball peen striking face is ideal for shaping sheet metal and peening rivets
  • The flat striking face is ideal for driving punches or cold chisels, flattening sheet metal, and aligning heavy parts for assembly or welding
  • Striking faces are made of 4140 Chromium-Molybdenum steel, hardened to HRC 52
  • The contoured handle, with its textured surface and flared base, provides a comfortable, nonslip grip for hammering
  • The thick outer jacket is made from hot cast polyurethane that's highly resistant to chipping, cracking, and tearing
  • Steel shot flows smoothly without sticking or clumping and won't degrade over time
  • The shot-filled head reduces post-strike rebound, allowing for better controlled hits to the workpiece
  • Permanent head-to-handle epoxy bond will not loosen over time
  • Soft and comfortable, non-slip rubber grip
  • Exterior poly jacket protects handle core from missed strikes
  • High-strength fiberglass handle core helps absorb vibrations

More Info

TEKTON 26 oz. Dead Blow Hammer | HDB30026

More from Industrial & Scientific
Search only TEKTON brand name
TEKTON 26 oz. Dead Blow Hammer | HDB30026

Current price: 30 USD


Check price and availability


Height: 2 Inches

Length: 12.8 Inches

Width: 4.2 Inches

Weight: 1.63 Pounds

Warranty: No time limits, no receipts: tekton.com/tool-help

  • Permanent head-to-handle epoxy bond will not loosen over time
  • Forged and polished steel head
  • Soft and comfortable, non-slip rubber grip
  • Exterior poly jacket protects handle core from missed strikes
  • High-strength fiberglass handle core helps absorb vibrations
  • Made in USA
  • The ball peen striking face is ideal for shaping sheet metal and peening rivets
  • The flat striking face is ideal for driving punches or cold chisels, flattening sheet metal, and aligning heavy parts for assembly or welding
  • Striking faces are made of 4140 Chromium-Molybdenum steel, hardened to HRC 52
  • The contoured handle, with its textured surface and flared base, provides a comfortable, nonslip grip for hammering
  • The thick outer jacket is made from hot cast polyurethane that's highly resistant to chipping, cracking, and tearing
  • Steel shot flows smoothly without sticking or clumping and won't degrade over time
  • The shot-filled head reduces post-strike rebound, allowing for better controlled hits to the workpiece
  • Permanent head-to-handle epoxy bond will not loosen over time
  • Soft and comfortable, non-slip rubber grip
  • Exterior poly jacket protects handle core from missed strikes
  • High-strength fiberglass handle core helps absorb vibrations
  • Made in USA
  • Soft yet solid striking faces avoid marring surfaces
  • The contoured handle, with its textured surface and flared base, provides a comfortable, nonslip grip for hammering
  • The thick outer jacket is made from hot cast polyurethane that's highly resistant to chipping, cracking, and tearing
  • Steel shot flows smoothly without sticking or clumping and won't degrade over time
  • The shot-filled head reduces post-strike rebound, allowing for better controlled hits to the workpiece

More Info

TEKTON 16 oz. Jacketed Fiberglass Brass Hammer | 30903

More from Industrial & Scientific
Search only TEKTON brand name
TEKTON 16 oz. Jacketed Fiberglass Brass Hammer | 30903

Current price: 24 USD


Check price and availability


Height: 1.1 Inches

Length: 11 Inches

Width: 3.1 Inches

Warranty: Always Guaranteed: [email protected]

  • Permanent head-to-handle epoxy bond will not loosen over time
  • Forged and polished steel head
  • Soft and comfortable, non-slip rubber grip
  • Exterior poly jacket protects handle core from missed strikes
  • High-strength fiberglass handle core helps absorb vibrations
  • Made in USA
  • The ball peen striking face is ideal for shaping sheet metal and peening rivets
  • The flat striking face is ideal for driving punches or cold chisels, flattening sheet metal, and aligning heavy parts for assembly or welding
  • Striking faces are made of 4140 Chromium-Molybdenum steel, hardened to HRC 52
  • The contoured handle, with its textured surface and flared base, provides a comfortable, nonslip grip for hammering
  • The thick outer jacket is made from hot cast polyurethane that's highly resistant to chipping, cracking, and tearing
  • Steel shot flows smoothly without sticking or clumping and won't degrade over time
  • The shot-filled head reduces post-strike rebound, allowing for better controlled hits to the workpiece
  • Permanent head-to-handle epoxy bond will not loosen over time
  • Soft and comfortable, non-slip rubber grip
  • Exterior poly jacket protects handle core from missed strikes
  • High-strength fiberglass handle core helps absorb vibrations
  • Made in USA
  • Soft yet solid striking faces avoid marring surfaces
  • The contoured handle, with its textured surface and flared base, provides a comfortable, nonslip grip for hammering
  • The thick outer jacket is made from hot cast polyurethane that's highly resistant to chipping, cracking, and tearing
  • Steel shot flows smoothly without sticking or clumping and won't degrade over time
  • The shot-filled head reduces post-strike rebound, allowing for better controlled hits to the workpiece
  • Made for automotive, machine, and assembly applications
  • Permanent head-to-handle epoxy bond will not loosen over time
  • Soft and comfortable rubber grip provides sure, nonslip control
  • High-strength fiberglass handle is protected by an impact-resistant poly jacket
  • Double-faced, non-sparking solid brass head won't damage steel or iron parts

More Info

TEKTON Double-Faced Soft Mallet | 30812

More from Industrial & Scientific
Search only TEKTON brand name
TEKTON Double-Faced Soft Mallet | 30812

Current price: 12.99 USD


Check price and availability


Height: 1.4 Inches

Length: 11.4 Inches

Width: 3.7 Inches

Weight: 0.000625 Pounds

Warranty: Always Guaranteed: [email protected]

  • Permanent head-to-handle epoxy bond will not loosen over time
  • Forged and polished steel head
  • Soft and comfortable, non-slip rubber grip
  • Exterior poly jacket protects handle core from missed strikes
  • High-strength fiberglass handle core helps absorb vibrations
  • Made in USA
  • The ball peen striking face is ideal for shaping sheet metal and peening rivets
  • The flat striking face is ideal for driving punches or cold chisels, flattening sheet metal, and aligning heavy parts for assembly or welding
  • Striking faces are made of 4140 Chromium-Molybdenum steel, hardened to HRC 52
  • The contoured handle, with its textured surface and flared base, provides a comfortable, nonslip grip for hammering
  • The thick outer jacket is made from hot cast polyurethane that's highly resistant to chipping, cracking, and tearing
  • Steel shot flows smoothly without sticking or clumping and won't degrade over time
  • The shot-filled head reduces post-strike rebound, allowing for better controlled hits to the workpiece
  • Permanent head-to-handle epoxy bond will not loosen over time
  • Soft and comfortable, non-slip rubber grip
  • Exterior poly jacket protects handle core from missed strikes
  • High-strength fiberglass handle core helps absorb vibrations
  • Made in USA
  • Soft yet solid striking faces avoid marring surfaces
  • The contoured handle, with its textured surface and flared base, provides a comfortable, nonslip grip for hammering
  • The thick outer jacket is made from hot cast polyurethane that's highly resistant to chipping, cracking, and tearing
  • Steel shot flows smoothly without sticking or clumping and won't degrade over time
  • The shot-filled head reduces post-strike rebound, allowing for better controlled hits to the workpiece
  • Made for automotive, machine, and assembly applications
  • Permanent head-to-handle epoxy bond will not loosen over time
  • Soft and comfortable rubber grip provides sure, nonslip control
  • High-strength fiberglass handle is protected by an impact-resistant poly jacket
  • Double-faced, non-sparking solid brass head won't damage steel or iron parts
  • Chrome plated finish resists corrosion and easily wipes clean
  • Extra soft, non-slip rubber handle grip for ultimate comfort and control
  • Lightweight tubular steel handle shifts the weight balance toward head for extra power in each blow
  • Soft faces deliver a solid strike without damaging work surface

More Info

1