Inexpensive Ball Nose End Mills. Reviews September, 2021, page 5

Ruhi T3110BC 3 Flute Ball Nose CNC 2D and 3D Carving 1.0 Deg SupeRun Coated Up Cut with 1/8" x 1 1/2" x 1/4" x 3" Shank 1/4"

Search only Ruhitools brand name
Ruhi T3110BC 3 Flute Ball Nose CNC 2D and 3D Carving 1.0 Deg SupeRun Coated Up Cut with 1/8

Current price: 20.48 USD


Check price and availability


Height: 0.6 Inches

Length: 3.5 Inches

Width: 0.6 Inches

  • Benefits of superun Coating Creates a harder and tougher cutting edge allows for a prolonged cutting edge life
  • Satisfaction Guaranteed & Lifetime Warranty
  • Excellent for: Aluminum, Brass, Bronze, Composite, Fiberglass, Polyethylene (PE) Foam, Phenolics, Plastics, Polyurethane Foam, PVC, PVC Foam Board, Sign Board, Sign Foam, Tooling Board, Wood.
  • Shank Diameter: 1/4" Overall Length: 3"
  • Cutting Diameter: 1/8" Cutting Length: 1 1/2"

More Info

SpeTool Tapered Ball Nose Spiral Router Bit 0.5mm Tip Radius 4.82 Deg for CNC Milling Engraver Carving Bits

Search only SpeTool brand name
SpeTool Tapered Ball Nose Spiral Router Bit 0.5mm Tip Radius 4.82 Deg for CNC Milling Engraver Carving Bits

Current price: 15.99 USD


Check price and availability


Weight: 0.09 Pounds

  • Benefits of superun Coating Creates a harder and tougher cutting edge allows for a prolonged cutting edge life
  • Satisfaction Guaranteed & Lifetime Warranty
  • Excellent for: Aluminum, Brass, Bronze, Composite, Fiberglass, Polyethylene (PE) Foam, Phenolics, Plastics, Polyurethane Foam, PVC, PVC Foam Board, Sign Board, Sign Foam, Tooling Board, Wood.
  • Shank Diameter: 1/4" Overall Length: 3"
  • Cutting Diameter: 1/8" Cutting Length: 1 1/2"
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.

More Info

Kodiak Cutting Tools KCT133219 USA Made Solid Premium Carbide Ball Nose End Mill, AlTiN Coated, 4 Flute, 1/8" Shank, 1/4" Length of Cut, 1-1/2" Overall Length, 1/16"

Search only Kodiak Cutting Tools brand name
Kodiak Cutting Tools KCT133219 USA Made Solid Premium Carbide Ball Nose End Mill, AlTiN Coated, 4 Flute, 1/8

Current price: 14.99 USD

Saving: $5.44 (27%)


Check price and availability


  • Benefits of superun Coating Creates a harder and tougher cutting edge allows for a prolonged cutting edge life
  • Satisfaction Guaranteed & Lifetime Warranty
  • Excellent for: Aluminum, Brass, Bronze, Composite, Fiberglass, Polyethylene (PE) Foam, Phenolics, Plastics, Polyurethane Foam, PVC, PVC Foam Board, Sign Board, Sign Foam, Tooling Board, Wood.
  • Shank Diameter: 1/4" Overall Length: 3"
  • Cutting Diameter: 1/8" Cutting Length: 1 1/2"
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.
  • 4 Flutes Ball Nose ALTiN Coated
  • 1-1/2" Overall Length Center Cutting Carbide Endmill
  • 1/4" Flute Length (Length of Cut), 30 Degree Helix
  • 1/8" Shank Diameter
  • Premium Sub-Micrograin Carbide End Mill Made In the USA

More Info

OSCARBIDE Tapered Ball Nose Carbide End Mills 1/8" Shank R0.25 CNC Router Bit 2 Flutes Tin Coated for Engraving Milling 3D Relief Carving.5pcs/Set

Search only OSCARBIDE brand name
OSCARBIDE Tapered Ball Nose Carbide End Mills 1/8

Current price: 25.99 USD


Check price and availability


  • Benefits of superun Coating Creates a harder and tougher cutting edge allows for a prolonged cutting edge life
  • Satisfaction Guaranteed & Lifetime Warranty
  • Excellent for: Aluminum, Brass, Bronze, Composite, Fiberglass, Polyethylene (PE) Foam, Phenolics, Plastics, Polyurethane Foam, PVC, PVC Foam Board, Sign Board, Sign Foam, Tooling Board, Wood.
  • Shank Diameter: 1/4" Overall Length: 3"
  • Cutting Diameter: 1/8" Cutting Length: 1 1/2"
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.
  • 4 Flutes Ball Nose ALTiN Coated
  • 1-1/2" Overall Length Center Cutting Carbide Endmill
  • 1/4" Flute Length (Length of Cut), 30 Degree Helix
  • 1/8" Shank Diameter
  • Premium Sub-Micrograin Carbide End Mill Made In the USA
  • Widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
  • Rustless and anti-static, best performance with high precision,work perfect on milling or cutting machines
  • Can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB
  • Due to the Great hardness of solid Tungsten carbide Material,Long service life, not easy to break, precise
  • Ball Tip Radius 0.25mm ,Shank Diameter: 3.175mm ,Cutting Length: 15mm,Overall Length 38mm,5pcs/set

More Info

YG-1 52558TC Carbide Ball Nose End Mill, 2 Flute, Extra Long Length, TiCN Finish, 3" Length, 1/8"

Search only YG-1 brand name
YG-1 52558TC Carbide Ball Nose End Mill, 2 Flute, Extra Long Length, TiCN Finish, 3

Current price: 21.56 USD

Saving: $2.06 (9%)


Check price and availability


  • Benefits of superun Coating Creates a harder and tougher cutting edge allows for a prolonged cutting edge life
  • Satisfaction Guaranteed & Lifetime Warranty
  • Excellent for: Aluminum, Brass, Bronze, Composite, Fiberglass, Polyethylene (PE) Foam, Phenolics, Plastics, Polyurethane Foam, PVC, PVC Foam Board, Sign Board, Sign Foam, Tooling Board, Wood.
  • Shank Diameter: 1/4" Overall Length: 3"
  • Cutting Diameter: 1/8" Cutting Length: 1 1/2"
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.
  • 4 Flutes Ball Nose ALTiN Coated
  • 1-1/2" Overall Length Center Cutting Carbide Endmill
  • 1/4" Flute Length (Length of Cut), 30 Degree Helix
  • 1/8" Shank Diameter
  • Premium Sub-Micrograin Carbide End Mill Made In the USA
  • Widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
  • Rustless and anti-static, best performance with high precision,work perfect on milling or cutting machines
  • Can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB
  • Due to the Great hardness of solid Tungsten carbide Material,Long service life, not easy to break, precise
  • Ball Tip Radius 0.25mm ,Shank Diameter: 3.175mm ,Cutting Length: 15mm,Overall Length 38mm,5pcs/set
  • Package Dimensions: 3" L x 1" W x 1" H
  • YG-1 is based in South Korea
  • YG-1, High Quality Cutting Tools
  • Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics

More Info

SpeTool Ball Nose Tapered End Mill 1/4 inch Shank with 1.5mm Ball CNC Engraving Bits HRC55 TiAlN Coated for 3D and 2D Wood Acrylic Carving

Search only SpeTool brand name
SpeTool Ball Nose Tapered End Mill 1/4 inch Shank with 1.5mm Ball CNC Engraving Bits HRC55 TiAlN Coated for 3D and 2D Wood Acrylic Carving

Current price: 16.99 USD


Check price and availability


  • Benefits of superun Coating Creates a harder and tougher cutting edge allows for a prolonged cutting edge life
  • Satisfaction Guaranteed & Lifetime Warranty
  • Excellent for: Aluminum, Brass, Bronze, Composite, Fiberglass, Polyethylene (PE) Foam, Phenolics, Plastics, Polyurethane Foam, PVC, PVC Foam Board, Sign Board, Sign Foam, Tooling Board, Wood.
  • Shank Diameter: 1/4" Overall Length: 3"
  • Cutting Diameter: 1/8" Cutting Length: 1 1/2"
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.
  • 4 Flutes Ball Nose ALTiN Coated
  • 1-1/2" Overall Length Center Cutting Carbide Endmill
  • 1/4" Flute Length (Length of Cut), 30 Degree Helix
  • 1/8" Shank Diameter
  • Premium Sub-Micrograin Carbide End Mill Made In the USA
  • Widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
  • Rustless and anti-static, best performance with high precision,work perfect on milling or cutting machines
  • Can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB
  • Due to the Great hardness of solid Tungsten carbide Material,Long service life, not easy to break, precise
  • Ball Tip Radius 0.25mm ,Shank Diameter: 3.175mm ,Cutting Length: 15mm,Overall Length 38mm,5pcs/set
  • Package Dimensions: 3" L x 1" W x 1" H
  • YG-1 is based in South Korea
  • YG-1, High Quality Cutting Tools
  • Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 1.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 3.02Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters

More Info

YG-1 - 53558 E5062 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter

Search only YG-1 brand name
YG-1 - 53558 E5062 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3

Current price: 21.15 USD


Check price and availability


  • Benefits of superun Coating Creates a harder and tougher cutting edge allows for a prolonged cutting edge life
  • Satisfaction Guaranteed & Lifetime Warranty
  • Excellent for: Aluminum, Brass, Bronze, Composite, Fiberglass, Polyethylene (PE) Foam, Phenolics, Plastics, Polyurethane Foam, PVC, PVC Foam Board, Sign Board, Sign Foam, Tooling Board, Wood.
  • Shank Diameter: 1/4" Overall Length: 3"
  • Cutting Diameter: 1/8" Cutting Length: 1 1/2"
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.
  • 4 Flutes Ball Nose ALTiN Coated
  • 1-1/2" Overall Length Center Cutting Carbide Endmill
  • 1/4" Flute Length (Length of Cut), 30 Degree Helix
  • 1/8" Shank Diameter
  • Premium Sub-Micrograin Carbide End Mill Made In the USA
  • Widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
  • Rustless and anti-static, best performance with high precision,work perfect on milling or cutting machines
  • Can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB
  • Due to the Great hardness of solid Tungsten carbide Material,Long service life, not easy to break, precise
  • Ball Tip Radius 0.25mm ,Shank Diameter: 3.175mm ,Cutting Length: 15mm,Overall Length 38mm,5pcs/set
  • Package Dimensions: 3" L x 1" W x 1" H
  • YG-1 is based in South Korea
  • YG-1, High Quality Cutting Tools
  • Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 1.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 3.02Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic

More Info

Jarrow Tool Extra Long 1/4" - 2 Flute - Carbide Ball Nose End Mill for CNC Machine Milling, for Alloy Steels/Hardened Metals - 55HRC TiAlN Coated

Search only JARROW TOOL brand name
Jarrow Tool Extra Long 1/4

Current price: 19.99 USD


Check price and availability


  • Benefits of superun Coating Creates a harder and tougher cutting edge allows for a prolonged cutting edge life
  • Satisfaction Guaranteed & Lifetime Warranty
  • Excellent for: Aluminum, Brass, Bronze, Composite, Fiberglass, Polyethylene (PE) Foam, Phenolics, Plastics, Polyurethane Foam, PVC, PVC Foam Board, Sign Board, Sign Foam, Tooling Board, Wood.
  • Shank Diameter: 1/4" Overall Length: 3"
  • Cutting Diameter: 1/8" Cutting Length: 1 1/2"
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.
  • 4 Flutes Ball Nose ALTiN Coated
  • 1-1/2" Overall Length Center Cutting Carbide Endmill
  • 1/4" Flute Length (Length of Cut), 30 Degree Helix
  • 1/8" Shank Diameter
  • Premium Sub-Micrograin Carbide End Mill Made In the USA
  • Widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
  • Rustless and anti-static, best performance with high precision,work perfect on milling or cutting machines
  • Can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB
  • Due to the Great hardness of solid Tungsten carbide Material,Long service life, not easy to break, precise
  • Ball Tip Radius 0.25mm ,Shank Diameter: 3.175mm ,Cutting Length: 15mm,Overall Length 38mm,5pcs/set
  • Package Dimensions: 3" L x 1" W x 1" H
  • YG-1 is based in South Korea
  • YG-1, High Quality Cutting Tools
  • Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 1.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 3.02Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • 【SPECIFICATIONS】1/4" Diam, 1-1/8" LOC, 1/4" Shank Diam, 3" OAL
  • Suitable for Most Steel, Titanium Alloy and Heat-Resistant Alloy
  • Long Service Life, High Cutting Speeds, High Precision
  • Made by Japan, Switzerland, and Germany Production Machines
  • Industrial Quality - Made with Premium Raw Materials

More Info

SpeTool Ball Nose Carbide End Mill for Aluminum CNC Cutter Router Bits Double Flute Spiral Milling Tool 1/4 inch Shank Extra Long 3 inch

Search only SpeTool brand name
SpeTool Ball Nose Carbide End Mill for Aluminum CNC Cutter Router Bits Double Flute Spiral Milling Tool 1/4 inch Shank Extra Long 3 inch

Current price: 16.99 USD


Check price and availability


  • Benefits of superun Coating Creates a harder and tougher cutting edge allows for a prolonged cutting edge life
  • Satisfaction Guaranteed & Lifetime Warranty
  • Excellent for: Aluminum, Brass, Bronze, Composite, Fiberglass, Polyethylene (PE) Foam, Phenolics, Plastics, Polyurethane Foam, PVC, PVC Foam Board, Sign Board, Sign Foam, Tooling Board, Wood.
  • Shank Diameter: 1/4" Overall Length: 3"
  • Cutting Diameter: 1/8" Cutting Length: 1 1/2"
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.
  • 4 Flutes Ball Nose ALTiN Coated
  • 1-1/2" Overall Length Center Cutting Carbide Endmill
  • 1/4" Flute Length (Length of Cut), 30 Degree Helix
  • 1/8" Shank Diameter
  • Premium Sub-Micrograin Carbide End Mill Made In the USA
  • Widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
  • Rustless and anti-static, best performance with high precision,work perfect on milling or cutting machines
  • Can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB
  • Due to the Great hardness of solid Tungsten carbide Material,Long service life, not easy to break, precise
  • Ball Tip Radius 0.25mm ,Shank Diameter: 3.175mm ,Cutting Length: 15mm,Overall Length 38mm,5pcs/set
  • Package Dimensions: 3" L x 1" W x 1" H
  • YG-1 is based in South Korea
  • YG-1, High Quality Cutting Tools
  • Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 1.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 3.02Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • 【SPECIFICATIONS】1/4" Diam, 1-1/8" LOC, 1/4" Shank Diam, 3" OAL
  • Suitable for Most Steel, Titanium Alloy and Heat-Resistant Alloy
  • Long Service Life, High Cutting Speeds, High Precision
  • Made by Japan, Switzerland, and Germany Production Machines
  • Industrial Quality - Made with Premium Raw Materials
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC, Engraving Machine. Aluminum, copper and other Non-Ferrous material
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length

More Info

Yonico Router Bits CNC End Mill Solid Carbide Spiral 2 Flute Ballnose 1/2-Inch Dia. 1/2-Inch Shank 34240-SC

Search only Yonico brand name
Yonico Router Bits CNC End Mill Solid Carbide Spiral 2 Flute Ballnose 1/2-Inch Dia. 1/2-Inch Shank 34240-SC

Current price: 38.92 USD


Check price and availability


Height: 0.5 Inches

Length: 3 Inches

Width: 0.5 Inches

Weight: 0.2866009406 Pounds

  • Benefits of superun Coating Creates a harder and tougher cutting edge allows for a prolonged cutting edge life
  • Satisfaction Guaranteed & Lifetime Warranty
  • Excellent for: Aluminum, Brass, Bronze, Composite, Fiberglass, Polyethylene (PE) Foam, Phenolics, Plastics, Polyurethane Foam, PVC, PVC Foam Board, Sign Board, Sign Foam, Tooling Board, Wood.
  • Shank Diameter: 1/4" Overall Length: 3"
  • Cutting Diameter: 1/8" Cutting Length: 1 1/2"
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.
  • 4 Flutes Ball Nose ALTiN Coated
  • 1-1/2" Overall Length Center Cutting Carbide Endmill
  • 1/4" Flute Length (Length of Cut), 30 Degree Helix
  • 1/8" Shank Diameter
  • Premium Sub-Micrograin Carbide End Mill Made In the USA
  • Widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
  • Rustless and anti-static, best performance with high precision,work perfect on milling or cutting machines
  • Can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB
  • Due to the Great hardness of solid Tungsten carbide Material,Long service life, not easy to break, precise
  • Ball Tip Radius 0.25mm ,Shank Diameter: 3.175mm ,Cutting Length: 15mm,Overall Length 38mm,5pcs/set
  • Package Dimensions: 3" L x 1" W x 1" H
  • YG-1 is based in South Korea
  • YG-1, High Quality Cutting Tools
  • Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 1.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 3.02Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Four flutes produce a better finish than fewer flutes
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • 【SPECIFICATIONS】1/4" Diam, 1-1/8" LOC, 1/4" Shank Diam, 3" OAL
  • Suitable for Most Steel, Titanium Alloy and Heat-Resistant Alloy
  • Long Service Life, High Cutting Speeds, High Precision
  • Made by Japan, Switzerland, and Germany Production Machines
  • Industrial Quality - Made with Premium Raw Materials
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC, Engraving Machine. Aluminum, copper and other Non-Ferrous material
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • Polished to a mirror finish from a solid carbide rod for precision & accuracy
  • For use on CNC, table mount and handheld routers
  • Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool
  • For smooth contour 3D CNC milling and carving
  • This 2 flute round nose endmill has a cutting diameter of 1/2" and a cutting length of 1-1/4". The shank is 1/2" and the overall length is 3".

More Info

1    2    3    4    5    6    7    8    9    10