High rated Ball Nose End Mills. Reviews September, 2021, page 1

SpeTool 4-Flute Ball Nose Extra Long Spiral Carbide End Mill CNC Router Bits 5/16" Cutter with TiAlN Coated

Search only SpeTool brand name
SpeTool 4-Flute Ball Nose Extra Long Spiral Carbide End Mill CNC Router Bits 5/16

Current price: 19.99 USD


Check price and availability


  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55
  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length

More Info

SPEED TIGER Carbide Tapered End Mill- CNC Carving Bits, Ball Tip R0.5, 1/4"Shank 3"OVL for Wood/Alloy Steels/Hardened Steels-Made in Taiwan

Search only SPEED TIGER brand name
SPEED TIGER Carbide Tapered End Mill- CNC Carving Bits, Ball Tip R0.5, 1/4

Current price: 19.99 USD


Check price and availability


Height: 0.2362204722 Inches

Length: 0.2362204722 Inches

Width: 2.9921259812 Inches

  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55
  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • nACo COATING - Titanium aluminum silicon nitride (AlTiSiN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • Tip Radius: 0.5mm, Cutting Length: 1-1/4", Shank Diameter: 1/4", Full Length: 3”, Single Side Angle: 4.82 Degree
  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron

More Info

HHIP 8001-0006 2-Flute M2 Ball Nose End Mill Set, 1/8"-1/2", 6 Piece

Search only HHIP brand name
HHIP 8001-0006 2-Flute M2 Ball Nose End Mill Set, 1/8

Current price: 44.37 USD

Saving: $8.80 (17%)


Check price and availability


Height: 5.99999999388 Inches

Length: 3.99999999592 Inches

Width: 7.99999999184 Inches

Weight: 0.54 Pounds

  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55
  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • nACo COATING - Titanium aluminum silicon nitride (AlTiSiN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • Tip Radius: 0.5mm, Cutting Length: 1-1/4", Shank Diameter: 1/4", Full Length: 3”, Single Side Angle: 4.82 Degree
  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron
  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut

More Info

SpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length

Search only SpeTool brand name
SpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length

Current price: 16.99 USD


Check price and availability


  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55
  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • nACo COATING - Titanium aluminum silicon nitride (AlTiSiN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • Tip Radius: 0.5mm, Cutting Length: 1-1/4", Shank Diameter: 1/4", Full Length: 3”, Single Side Angle: 4.82 Degree
  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron
  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length

More Info

SpeTool 4 Flutes Ball Nose End Mill Solid Carbide CNC Router Bits 1/4 Inch Shank with 3 Inch Long Spiral Milling Tool

Search only SpeTool brand name
SpeTool 4 Flutes Ball Nose End Mill Solid Carbide CNC Router Bits 1/4 Inch Shank with 3 Inch Long Spiral Milling Tool

Current price: 16.99 USD


Check price and availability


  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55
  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • nACo COATING - Titanium aluminum silicon nitride (AlTiSiN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • Tip Radius: 0.5mm, Cutting Length: 1-1/4", Shank Diameter: 1/4", Full Length: 3”, Single Side Angle: 4.82 Degree
  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron
  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated
  • Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length

More Info

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

Search only SpeTool brand name
SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

Current price: 40.99 USD


Check price and availability


  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55
  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • nACo COATING - Titanium aluminum silicon nitride (AlTiSiN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • Tip Radius: 0.5mm, Cutting Length: 1-1/4", Shank Diameter: 1/4", Full Length: 3”, Single Side Angle: 4.82 Degree
  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron
  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated
  • Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length

More Info

Genmitsu 40pcs End Mills CNC Router Bits, 1/8" Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

Search only Genmitsu brand name
Genmitsu 40pcs End Mills CNC Router Bits, 1/8

Current price: 33.99 USD

Saving: $6.00 (15%)


Check price and availability


  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55
  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • nACo COATING - Titanium aluminum silicon nitride (AlTiSiN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • Tip Radius: 0.5mm, Cutting Length: 1-1/4", Shank Diameter: 1/4", Full Length: 3”, Single Side Angle: 4.82 Degree
  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron
  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated
  • Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

More Info

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat, R0.25-1.0, 1/8” Shank, TB04A

Search only Genmitsu brand name
Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat, R0.25-1.0, 1/8” Shank, TB04A

Current price: 19.99 USD


Check price and availability


  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55
  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • nACo COATING - Titanium aluminum silicon nitride (AlTiSiN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • Tip Radius: 0.5mm, Cutting Length: 1-1/4", Shank Diameter: 1/4", Full Length: 3”, Single Side Angle: 4.82 Degree
  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron
  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated
  • Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best.
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

More Info

1/8" 22mm Carbide Ball Nose End Mills CNC Router Bits Double Flute Spiral Set Tool Pack Of 10

Search only Metalworking' s tool brand name
1/8

Current price: 14.99 USD


Check price and availability


Height: 0.5118110231 Inches

Length: 5.118110231 Inches

Width: 4.330708657 Inches

Weight: 0.1 Pounds

  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55
  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • nACo COATING - Titanium aluminum silicon nitride (AlTiSiN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • Tip Radius: 0.5mm, Cutting Length: 1-1/4", Shank Diameter: 1/4", Full Length: 3”, Single Side Angle: 4.82 Degree
  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron
  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated
  • Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best.
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Nylon, Resin, most plastics ect..
  • Mainly used in cutting and engraving.
  • High cost-effective, improve efficiency.
  • High-density polished, wear-resistant, high temperature.

More Info

Yonico Router Bits CNC End Mill Solid Carbide Spiral 2 Flute Ballnose 1/4-Inch Dia. 1/4-Inch Shank 34221-SC

Search only Yonico brand name
Yonico Router Bits CNC End Mill Solid Carbide Spiral 2 Flute Ballnose 1/4-Inch Dia. 1/4-Inch Shank 34221-SC

Current price: 15.96 USD


Check price and availability


Height: 0.25 Inches

Length: 2.5 Inches

Width: 0.25 Inches

Weight: 0.09 Pounds

  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55
  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory; Great performance at a competitive price.
  • nACo COATING - Titanium aluminum silicon nitride (AlTiSiN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • Tip Radius: 0.5mm, Cutting Length: 1-1/4", Shank Diameter: 1/4", Full Length: 3”, Single Side Angle: 4.82 Degree
  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron
  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated
  • Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best.
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Nylon, Resin, most plastics ect..
  • Mainly used in cutting and engraving.
  • High cost-effective, improve efficiency.
  • High-density polished, wear-resistant, high temperature.
  • Polished to a mirror finish from a solid carbide rod for precision & accuracy
  • For use on CNC, table mount and handheld routers
  • Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool
  • For smooth contour 3D CNC milling and carving
  • This 2 flute round nose endmill has a cutting diameter of 1/4" and a cutting length of 3/4". The shank is 1/4" and the overall length is 2-1/2".

More Info

1    2    3    4    5    6    7    8    9    10