Wonderful Ball Nose End Mills. Reviews July, 2021, page 7

SpeTool Tapered Ball Nose Router Bits Milling 1/4" Shank with 0.75mm Tips 4.36 Deg for CNC Machine 3D Engraver Carving End Mill

More from Tools & Home Improvement
Search only SpeTool brand name
SpeTool Tapered Ball Nose Router Bits Milling 1/4

Current price: 17.99 USD


Check price and availability


  • High quality tungsten carbide and coat. Long service life and less wear.
  • For Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.36Deg
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, H-Si Coated

More Info

Titan TC10324 Solid Carbide End Mill, Stub Length, 2 Flute, 30 Degree Helix, Ball Nose, Uncoated, 3/8" Size, 3/8" Shank Diameter, 2" Overall Length, 5/8" Cutting Length

More from Tools & Home Improvement
Search only Titan brand name
Titan TC10324 Solid Carbide End Mill, Stub Length, 2 Flute, 30 Degree Helix, Ball Nose, Uncoated, 3/8

Current price: 30.85 USD


Check price and availability


  • High quality tungsten carbide and coat. Long service life and less wear.
  • For Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.36Deg
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, H-Si Coated
  • Center Cutting
  • Ball Nose - Stub Length
  • 2 Flute Single End
  • Made in USA
  • Premium Sub-Micrograin Solid Carbide

More Info

YG-1 - 52901 E5018 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 6" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 - 52901 E5018 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 6

Current price: 44.26 USD


Check price and availability


  • High quality tungsten carbide and coat. Long service life and less wear.
  • For Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.36Deg
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, H-Si Coated
  • Center Cutting
  • Ball Nose - Stub Length
  • 2 Flute Single End
  • Made in USA
  • Premium Sub-Micrograin Solid Carbide
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic

More Info

SpeTool Spiral Tapered Ball Nose End Mill 1/4 X 3 inches Router Bit with 0.75mm Ball Nose 4.36 Deg for CNC Machine Engraving Carving Bits

More from Tools & Home Improvement
Search only SpeTool brand name
SpeTool Spiral Tapered Ball Nose End Mill 1/4 X 3 inches Router Bit with 0.75mm Ball Nose 4.36 Deg for CNC Machine Engraving Carving Bits

Current price: 16.99 USD


Check price and availability


  • High quality tungsten carbide and coat. Long service life and less wear.
  • For Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.36Deg
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, H-Si Coated
  • Center Cutting
  • Ball Nose - Stub Length
  • 2 Flute Single End
  • Made in USA
  • Premium Sub-Micrograin Solid Carbide
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Acrylic, Hardwood, MDF, Plastics, Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.36Deg
  • The CNC engraving bits with 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters

More Info

HRC45 2 Flute Ball Nose End Mills Radius 0.5 1 1.5 2 2.5 3 Standard Tungsten Steel Ball end milling Cutter CNC Carbide milling Cutter

More from Tools & Home Improvement
Search only sendrill brand name
HRC45 2 Flute Ball Nose End Mills Radius 0.5 1 1.5 2 2.5 3 Standard Tungsten Steel Ball end milling Cutter CNC Carbide milling Cutter

Current price: 26.95 USD


Check price and availability


  • High quality tungsten carbide and coat. Long service life and less wear.
  • For Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.36Deg
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, H-Si Coated
  • Center Cutting
  • Ball Nose - Stub Length
  • 2 Flute Single End
  • Made in USA
  • Premium Sub-Micrograin Solid Carbide
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Acrylic, Hardwood, MDF, Plastics, Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.36Deg
  • The CNC engraving bits with 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • Package: 6x End Mill Cutter CNC Bits.
  • TiAlN COATING:Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.
  • General Application Cutter:For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc.
  • Model:This end mill set includes 6 diameter sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs
  • Material: Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance, Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45.

More Info

YG-1 - 50573 E5014 Carbide Ball Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 3" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter

More from Tools & Home Improvement
Search only YG-1 brand name
YG-1 - 50573 E5014 Carbide Ball Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 3

Current price: 26.8 USD


Check price and availability


  • High quality tungsten carbide and coat. Long service life and less wear.
  • For Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.36Deg
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, H-Si Coated
  • Center Cutting
  • Ball Nose - Stub Length
  • 2 Flute Single End
  • Made in USA
  • Premium Sub-Micrograin Solid Carbide
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Acrylic, Hardwood, MDF, Plastics, Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.36Deg
  • The CNC engraving bits with 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • Package: 6x End Mill Cutter CNC Bits.
  • TiAlN COATING:Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.
  • General Application Cutter:For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc.
  • Model:This end mill set includes 6 diameter sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs
  • Material: Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance, Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45.
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
  • Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic

More Info

Melin Tool - 56245 CCMGS-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 1.5000" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter

More from Tools & Home Improvement
Search only Melin Tool brand name
Melin Tool - 56245 CCMGS-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 1.5000

Current price: 17.4 USD


Check price and availability


  • High quality tungsten carbide and coat. Long service life and less wear.
  • For Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.36Deg
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, H-Si Coated
  • Center Cutting
  • Ball Nose - Stub Length
  • 2 Flute Single End
  • Made in USA
  • Premium Sub-Micrograin Solid Carbide
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Acrylic, Hardwood, MDF, Plastics, Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.36Deg
  • The CNC engraving bits with 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • Package: 6x End Mill Cutter CNC Bits.
  • TiAlN COATING:Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.
  • General Application Cutter:For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc.
  • Model:This end mill set includes 6 diameter sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs
  • Material: Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance, Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45.
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
  • Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Designed to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and nonferrous
  • Use for radius and contouring part surfaces
  • Round shanks allow use with a wide variety of toolholding systems
  • Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

More Info

SpeTool 4-Flute Ball Nose Extra Long Spiral Carbide End Mill CNC Router Bits 5/16" Cutter with TiAlN Coated

More from Tools & Home Improvement
Search only SpeTool brand name
SpeTool 4-Flute Ball Nose Extra Long Spiral Carbide End Mill CNC Router Bits 5/16

Current price: 19.99 USD


Check price and availability


  • High quality tungsten carbide and coat. Long service life and less wear.
  • For Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.36Deg
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, H-Si Coated
  • Center Cutting
  • Ball Nose - Stub Length
  • 2 Flute Single End
  • Made in USA
  • Premium Sub-Micrograin Solid Carbide
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Acrylic, Hardwood, MDF, Plastics, Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.36Deg
  • The CNC engraving bits with 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • Package: 6x End Mill Cutter CNC Bits.
  • TiAlN COATING:Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.
  • General Application Cutter:For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc.
  • Model:This end mill set includes 6 diameter sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs
  • Material: Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance, Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45.
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
  • Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Designed to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and nonferrous
  • Use for radius and contouring part surfaces
  • Round shanks allow use with a wide variety of toolholding systems
  • Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55
  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length

More Info

Weeker SQ2121 CNC Router Bit 2 Flute Up Cut Ball Nose Spiral End Mill 1/4" Shank 3/16"X3/4"X1/4"X2"

More from Tools & Home Improvement
Search only brand name
Weeker SQ2121 CNC Router Bit 2 Flute Up Cut Ball Nose Spiral End Mill 1/4

Current price: 16.8 USD


Check price and availability


Height: 0.2 Inches

Length: 2 Inches

Width: 0.2 Inches

  • High quality tungsten carbide and coat. Long service life and less wear.
  • For Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.36Deg
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, H-Si Coated
  • Center Cutting
  • Ball Nose - Stub Length
  • 2 Flute Single End
  • Made in USA
  • Premium Sub-Micrograin Solid Carbide
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Acrylic, Hardwood, MDF, Plastics, Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.36Deg
  • The CNC engraving bits with 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • Package: 6x End Mill Cutter CNC Bits.
  • TiAlN COATING:Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.
  • General Application Cutter:For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc.
  • Model:This end mill set includes 6 diameter sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs
  • Material: Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance, Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45.
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
  • Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Designed to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and nonferrous
  • Use for radius and contouring part surfaces
  • Round shanks allow use with a wide variety of toolholding systems
  • Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55
  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • Premium Carbide Industrial Quality
  • For use on CNC, table mount and handheld routers
  • For smooth contour 3D CNC milling and carving
  • Cutting Length:3/4" Overall Length:2"
  • Cutting Diamete:3/16" Shank Diameter:1/4"

More Info

JERRAY CNC Carving 3.92 Deg 2 Flutes Tapered Angle Ball Tip Radius=1.0mm X 1/4" Shank Tungsten Solid Carbide HRC55 with TiAIN Coated

More from Tools & Home Improvement
Search only JERRAY brand name
JERRAY CNC Carving 3.92 Deg 2 Flutes Tapered Angle Ball Tip Radius=1.0mm X 1/4

Current price: 16.88 USD


Check price and availability


  • High quality tungsten carbide and coat. Long service life and less wear.
  • For Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.36Deg
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, H-Si Coated
  • Center Cutting
  • Ball Nose - Stub Length
  • 2 Flute Single End
  • Made in USA
  • Premium Sub-Micrograin Solid Carbide
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Acrylic, Hardwood, MDF, Plastics, Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.36Deg
  • The CNC engraving bits with 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • Package: 6x End Mill Cutter CNC Bits.
  • TiAlN COATING:Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.
  • General Application Cutter:For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc.
  • Model:This end mill set includes 6 diameter sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs
  • Material: Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance, Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45.
  • Ball nose end mills (also called ball end) create contoured surfaces­­­
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
  • Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
  • Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
  • Designed to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and nonferrous
  • Use for radius and contouring part surfaces
  • Round shanks allow use with a wide variety of toolholding systems
  • Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55
  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • Premium Carbide Industrial Quality
  • For use on CNC, table mount and handheld routers
  • For smooth contour 3D CNC milling and carving
  • Cutting Length:3/4" Overall Length:2"
  • Cutting Diamete:3/16" Shank Diameter:1/4"

More Info

1    2    3    4    5    6    7    8    9    10