Exclusive Ball Nose End Mills. Reviews August, 2021, page 2

SpeTool 4Pcs/Pack Assorted R0.25~1.0 Tip 1/8" Tapered End Mill Cone Ball Nose Carbide Bit CNC Cutter for Carving Engraving

More from Tools & Home Improvement
Search only SpeTool brand name
SpeTool 4Pcs/Pack Assorted R0.25~1.0 Tip 1/8

Current price: 20.89 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge

More Info

Drill America DWCT1118 1/2" X 1/2" High Speed Steel 2 Flute Single End Ball End Mill, DWC Series

More from Tools & Home Improvement
Search only Drill America brand name
Drill America DWCT1118 1/2

Current price: 16.66 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Designed to machine most materials of medium hardness such as steel, brass, bronze and iron
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Available in polished finish
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

SpeTool Tapered Ball Nose End Mill 1/4" X 3" with 0.25mm Ball Nose 5.26Deg for CNC Machine Engraving Carving Bits H-Si Coated

More from Tools & Home Improvement
Search only SpeTool brand name
SpeTool Tapered Ball Nose End Mill 1/4

Current price: 17.99 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Designed to machine most materials of medium hardness such as steel, brass, bronze and iron
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Available in polished finish
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Suitable: Acrylic, MDF, Hardwood, Carbon steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 0.25mm, Flute Length:1-1/4 Inch, Overall Length: 3 Inch, Single Side Angel: 5.2Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters

More Info

SPEED TIGER ISB Carbide Ball Nose End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 2 Flute - ISB5/16"2T - Made in Taiwan (1 Piece, 5/16")

More from Tools & Home Improvement
Search only SPEED TIGER brand name
SPEED TIGER ISB Carbide Ball Nose End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 2 Flute - ISB5/16

Current price: 23.55 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Designed to machine most materials of medium hardness such as steel, brass, bronze and iron
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Available in polished finish
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Suitable: Acrylic, MDF, Hardwood, Carbon steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 0.25mm, Flute Length:1-1/4 Inch, Overall Length: 3 Inch, Single Side Angel: 5.2Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • BUY BULK AND SAVE - Search Amazon for B07Q51J4JM for a 5 pc bulk pack or contact Amazon seller for more info
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • DIFFERENT SIZES - 2 flutes, 1/16" 5/64" 3/32" 7/64" 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8"
  • GENERAL APPLICATION - Carbon steels (HB225), Alloy steels (HB225~325), Pre-hardened steels (HRC30~40), Hardened Steels (HRC40~45), Cast Iron

More Info

Radius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool

More from Tools & Home Improvement
Search only Home of quality tools brand name
Radius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool

Current price: 28.99 USD


Check price and availability


Length: 5 Centimeters

  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Designed to machine most materials of medium hardness such as steel, brass, bronze and iron
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Available in polished finish
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Suitable: Acrylic, MDF, Hardwood, Carbon steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 0.25mm, Flute Length:1-1/4 Inch, Overall Length: 3 Inch, Single Side Angel: 5.2Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • BUY BULK AND SAVE - Search Amazon for B07Q51J4JM for a 5 pc bulk pack or contact Amazon seller for more info
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • DIFFERENT SIZES - 2 flutes, 1/16" 5/64" 3/32" 7/64" 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8"
  • GENERAL APPLICATION - Carbon steels (HB225), Alloy steels (HB225~325), Pre-hardened steels (HRC30~40), Hardened Steels (HRC40~45), Cast Iron
  • Package: 6x End Mill Cutter CNC Bits.
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc.
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45.
  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs.

More Info

Drill America - DWCT1132 3/4" X 3/4" High Speed Steel 2 Flute Single End Ball End Mill, DWC Series

More from Tools & Home Improvement
Search only Drill America brand name
Drill America - DWCT1132 3/4

Current price: 27.92 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Designed to machine most materials of medium hardness such as steel, brass, bronze and iron
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Available in polished finish
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Suitable: Acrylic, MDF, Hardwood, Carbon steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 0.25mm, Flute Length:1-1/4 Inch, Overall Length: 3 Inch, Single Side Angel: 5.2Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • BUY BULK AND SAVE - Search Amazon for B07Q51J4JM for a 5 pc bulk pack or contact Amazon seller for more info
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • DIFFERENT SIZES - 2 flutes, 1/16" 5/64" 3/32" 7/64" 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8"
  • GENERAL APPLICATION - Carbon steels (HB225), Alloy steels (HB225~325), Pre-hardened steels (HRC30~40), Hardened Steels (HRC40~45), Cast Iron
  • Package: 6x End Mill Cutter CNC Bits.
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc.
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45.
  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs.
  • Designed to machine most materials of medium hardness such as steel, brass, bronze and iron
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Available in polished finish
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

Niagara Cutter - CB430-0.063-F4-B.0-Z4 N56017 Carbide Ball Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 1.5" Overall Length, 0.063" Cutting Diameter, 0.125" Shank Diameter

More from Tools & Home Improvement
Search only Niagara Cutter brand name
Niagara Cutter - CB430-0.063-F4-B.0-Z4 N56017 Carbide Ball Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 1.5

Current price: 19.03 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Designed to machine most materials of medium hardness such as steel, brass, bronze and iron
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Available in polished finish
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Suitable: Acrylic, MDF, Hardwood, Carbon steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 0.25mm, Flute Length:1-1/4 Inch, Overall Length: 3 Inch, Single Side Angel: 5.2Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • BUY BULK AND SAVE - Search Amazon for B07Q51J4JM for a 5 pc bulk pack or contact Amazon seller for more info
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • DIFFERENT SIZES - 2 flutes, 1/16" 5/64" 3/32" 7/64" 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8"
  • GENERAL APPLICATION - Carbon steels (HB225), Alloy steels (HB225~325), Pre-hardened steels (HRC30~40), Hardened Steels (HRC40~45), Cast Iron
  • Package: 6x End Mill Cutter CNC Bits.
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc.
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45.
  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs.
  • Designed to machine most materials of medium hardness such as steel, brass, bronze and iron
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Available in polished finish
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications
  • Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity
  • Made of extra-fine grade carbide for ultra high transverse rupture strength
  • General purpose end mill for working on all types of materials
  • 4 flute design for creating finer finishes and a higher metal removal rate

More Info

40Pcs End Mill Bits Set 1/8" Shank, Mcwdoit CNC Router Bits Cutting Milling Tool Engraving Cutter Including Flat Nose/Ball Nose End Mill, Nano Blue Coat/Titanium Coat 2 Flute CNC Router Bits

More from Tools & Home Improvement
Search only mcwdoit brand name
40Pcs End Mill Bits Set 1/8

Current price: 33.99 USD


Check price and availability


Height: 4.21 Inches

Length: 5.35 Inches

Width: 1.3 Inches

  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Designed to machine most materials of medium hardness such as steel, brass, bronze and iron
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Available in polished finish
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Suitable: Acrylic, MDF, Hardwood, Carbon steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 0.25mm, Flute Length:1-1/4 Inch, Overall Length: 3 Inch, Single Side Angel: 5.2Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • BUY BULK AND SAVE - Search Amazon for B07Q51J4JM for a 5 pc bulk pack or contact Amazon seller for more info
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • DIFFERENT SIZES - 2 flutes, 1/16" 5/64" 3/32" 7/64" 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8"
  • GENERAL APPLICATION - Carbon steels (HB225), Alloy steels (HB225~325), Pre-hardened steels (HRC30~40), Hardened Steels (HRC40~45), Cast Iron
  • Package: 6x End Mill Cutter CNC Bits.
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc.
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45.
  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs.
  • Designed to machine most materials of medium hardness such as steel, brass, bronze and iron
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Available in polished finish
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications
  • Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity
  • Made of extra-fine grade carbide for ultra high transverse rupture strength
  • General purpose end mill for working on all types of materials
  • 4 flute design for creating finer finishes and a higher metal removal rate
  • 【Parameter】Overall Length(OAL): 38mm; Shank Diameter(SD): 3.175mm
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing.
  • 【Advantage】Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches.
  • 【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs.
  • 【High Quality】Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.

More Info

Kodiak Cutting Tools O8-G61J-HPXK USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 3/8" Diameter, 3/8" Shank, 1" Length of Cut, 2-1/2" Overall Length

More from Tools & Home Improvement
Search only Kodiak Cutting Tools brand name
Kodiak Cutting Tools O8-G61J-HPXK USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 3/8

Current price: 28.99 USD


Check price and availability


Weight: 0.11 Pounds

  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Designed to machine most materials of medium hardness such as steel, brass, bronze and iron
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Available in polished finish
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Suitable: Acrylic, MDF, Hardwood, Carbon steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 0.25mm, Flute Length:1-1/4 Inch, Overall Length: 3 Inch, Single Side Angel: 5.2Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • BUY BULK AND SAVE - Search Amazon for B07Q51J4JM for a 5 pc bulk pack or contact Amazon seller for more info
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • DIFFERENT SIZES - 2 flutes, 1/16" 5/64" 3/32" 7/64" 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8"
  • GENERAL APPLICATION - Carbon steels (HB225), Alloy steels (HB225~325), Pre-hardened steels (HRC30~40), Hardened Steels (HRC40~45), Cast Iron
  • Package: 6x End Mill Cutter CNC Bits.
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc.
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45.
  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs.
  • Designed to machine most materials of medium hardness such as steel, brass, bronze and iron
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Available in polished finish
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications
  • Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity
  • Made of extra-fine grade carbide for ultra high transverse rupture strength
  • General purpose end mill for working on all types of materials
  • 4 flute design for creating finer finishes and a higher metal removal rate
  • 【Parameter】Overall Length(OAL): 38mm; Shank Diameter(SD): 3.175mm
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing.
  • 【Advantage】Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches.
  • 【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs.
  • 【High Quality】Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.
  • 4 Flutes, ALTiN Coated, Ball Nose End
  • 2-1/2" Overall Length Center Cutting Carbide Endmill
  • 1" Flute Length (Length of Cut), 30 Degree Helix
  • 3/8" Shank Diameter
  • Premium Sub-Micrograin Carbide End Mill Made In the USA

More Info

Kodiak Cutting Tools KODIAK166175 USA Made Solid Carbide Ball Nose End Mill, TICN Coated, 4 Flute, 1/8" Shank, 1" Length of Cut, 3" Overall Length, 1/8" Diameter

More from Tools & Home Improvement
Search only Kodiak Cutting Tools brand name
Kodiak Cutting Tools KODIAK166175 USA Made Solid Carbide Ball Nose End Mill, TICN Coated, 4 Flute, 1/8

Current price: 24.03 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Designed to machine most materials of medium hardness such as steel, brass, bronze and iron
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Available in polished finish
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC,Engraving machine.Suitable: Acrylic, MDF, Hardwood, Carbon steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 0.25mm, Flute Length:1-1/4 Inch, Overall Length: 3 Inch, Single Side Angel: 5.2Deg
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • BUY BULK AND SAVE - Search Amazon for B07Q51J4JM for a 5 pc bulk pack or contact Amazon seller for more info
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
  • DIFFERENT SIZES - 2 flutes, 1/16" 5/64" 3/32" 7/64" 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8"
  • GENERAL APPLICATION - Carbon steels (HB225), Alloy steels (HB225~325), Pre-hardened steels (HRC30~40), Hardened Steels (HRC40~45), Cast Iron
  • Package: 6x End Mill Cutter CNC Bits.
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc.
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45.
  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs.
  • Designed to machine most materials of medium hardness such as steel, brass, bronze and iron
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • Available in polished finish
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications
  • Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity
  • Made of extra-fine grade carbide for ultra high transverse rupture strength
  • General purpose end mill for working on all types of materials
  • 4 flute design for creating finer finishes and a higher metal removal rate
  • 【Parameter】Overall Length(OAL): 38mm; Shank Diameter(SD): 3.175mm
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing.
  • 【Advantage】Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches.
  • 【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs.
  • 【High Quality】Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.
  • 4 Flutes, ALTiN Coated, Ball Nose End
  • 2-1/2" Overall Length Center Cutting Carbide Endmill
  • 1" Flute Length (Length of Cut), 30 Degree Helix
  • 3/8" Shank Diameter
  • Premium Sub-Micrograin Carbide End Mill Made In the USA
  • 4 Flutes
  • 1/8 Shank diameter
  • Made In the USA
  • 3 Overall Length
  • 1 Length of Cut

More Info

1    2    3    4    5    6    7    8    9    10