High rated Ball Nose End Mills. Reviews August, 2021, page 1

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

More from Tools & Home Improvement
Search only SpeTool brand name
SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

Current price: 40.99 USD


Check price and availability


  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length

More Info

HHIP 8001-0006 2-Flute M2 Ball Nose End Mill Set, 1/8"-1/2", 6 Piece

More from Tools & Home Improvement
Search only HHIP brand name
HHIP 8001-0006 2-Flute M2 Ball Nose End Mill Set, 1/8

Current price: 53.17 USD


Check price and availability


Height: 5.99999999388 Inches

Length: 3.99999999592 Inches

Width: 7.99999999184 Inches

Weight: 0.54 Pounds

  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length
  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut

More Info

Genmitsu 40pcs End Mills CNC Router Bits, 1/8" Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

More from Tools & Home Improvement
Search only Genmitsu brand name
Genmitsu 40pcs End Mills CNC Router Bits, 1/8

Current price: 33.99 USD

Saving: $6.00 (15%)


Check price and availability


  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length
  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

More Info

HOZLY for Wood Working Set Diameter 1mm 1.5mm 2.0mm 2.5mm 3.175mm Carbide Ball Nose End Mill CNC Engraving Router Bits Milling Cutter

More from Tools & Home Improvement
Search only HOZLY brand name
HOZLY for Wood Working Set Diameter 1mm 1.5mm 2.0mm 2.5mm 3.175mm Carbide Ball Nose End Mill CNC Engraving Router Bits Milling Cutter

Current price: 19.99 USD


Check price and availability


  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length
  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • For wood, MDF, HDF, solid wood, epoxy board, PVC, plastic

More Info

SpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length

More from Tools & Home Improvement
Search only SpeTool brand name
SpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length

Current price: 16.99 USD


Check price and availability


  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length
  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • For wood, MDF, HDF, solid wood, epoxy board, PVC, plastic
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length

More Info

SpeTool 5Pcs Carbide Ball Nose CNC Router Bits 1/8" Cutting Diameter Milling Tool HRC55, 1/8" Shank UpCut Spiral End Mill

More from Tools & Home Improvement
Search only SpeTool brand name
SpeTool 5Pcs Carbide Ball Nose CNC Router Bits 1/8

Current price: 22.95 USD

Saving: $3.04 (12%)


Check price and availability


  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length
  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • For wood, MDF, HDF, solid wood, epoxy board, PVC, plastic
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box
  • APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc; suitable for side milling, end milling, finish machining, etc.
  • PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology; long service life, not easy to break; excellent cutting results and enhanced productivity
  • SPECIFICATION. Ball nose, 2-flute, HRC55 with tialn coated
  • SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length

More Info

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat, R0.25-1.0, 1/8” Shank, TB04A

More from Tools & Home Improvement
Search only Genmitsu brand name
Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat, R0.25-1.0, 1/8” Shank, TB04A

Current price: 25.99 USD


Check price and availability


  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length
  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • For wood, MDF, HDF, solid wood, epoxy board, PVC, plastic
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box
  • APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc; suitable for side milling, end milling, finish machining, etc.
  • PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology; long service life, not easy to break; excellent cutting results and enhanced productivity
  • SPECIFICATION. Ball nose, 2-flute, HRC55 with tialn coated
  • SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc.
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best.
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

More Info

SpeTool 4 Flutes Ball Nose End Mill Solid Carbide CNC Router Bits 1/4 Inch Shank with 3 Inch Long Spiral Milling Tool

More from Tools & Home Improvement
Search only SpeTool brand name
SpeTool 4 Flutes Ball Nose End Mill Solid Carbide CNC Router Bits 1/4 Inch Shank with 3 Inch Long Spiral Milling Tool

Current price: 16.99 USD


Check price and availability


  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length
  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • For wood, MDF, HDF, solid wood, epoxy board, PVC, plastic
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box
  • APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc; suitable for side milling, end milling, finish machining, etc.
  • PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology; long service life, not easy to break; excellent cutting results and enhanced productivity
  • SPECIFICATION. Ball nose, 2-flute, HRC55 with tialn coated
  • SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc.
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best.
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated
  • Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length

More Info

HQMaster CNC Router Bit 1 8 Shank Ball Nose End Mill Cutting Dia. Spiral Milling Cutter Engraving Carving Tool Set Tungsten Steel for MDF Acrylic Wood PVC 10Pcs

More from Tools & Home Improvement
Search only HQMaster brand name
HQMaster CNC Router Bit 1 8 Shank Ball Nose End Mill Cutting Dia. Spiral Milling Cutter Engraving Carving Tool Set Tungsten Steel for MDF Acrylic Wood PVC 10Pcs

Current price: 12.99 USD


Check price and availability


Height: 0.35433 Inches

Length: 2.16535 Inches

Width: 2.16535 Inches

  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length
  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • For wood, MDF, HDF, solid wood, epoxy board, PVC, plastic
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box
  • APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc; suitable for side milling, end milling, finish machining, etc.
  • PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology; long service life, not easy to break; excellent cutting results and enhanced productivity
  • SPECIFICATION. Ball nose, 2-flute, HRC55 with tialn coated
  • SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc.
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best.
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated
  • Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • Package contents ---- 10pcs fluted tungsten steel spiral upcut ball nose bits assorted in storage case
  • Perfect cutting ---- the design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal
  • High efficiency ---- these bits own sharp edge which is able for fast engraving that makes high efficiency; durable, high precision and not easy to break; it is smokeless and burr-free while processing
  • Dimensions ---- diameter : 1/8 (3.175mm); cutting edge diameter : 2mm; cutting edge length (CEL)/flute length: 17mm; overall length: 38.5mm
  • Range of processing ---- for cutting/engraving/carving/sculpturing/roughing/milling in materials like MDF, ABS, PVC, acrylic, density board, wood, plywood, rosewood, hardwood etc.

More Info

Yonico Router Bits CNC End Mill Solid Carbide Spiral 2 Flute Ballnose 1/4-Inch Dia. 1/4-Inch Shank 34221-SC

More from Tools & Home Improvement
Search only Yonico brand name
Yonico Router Bits CNC End Mill Solid Carbide Spiral 2 Flute Ballnose 1/4-Inch Dia. 1/4-Inch Shank 34221-SC

Current price: 14.68 USD


Check price and availability


Height: 0.25 Inches

Length: 2.5 Inches

Width: 0.25 Inches

Weight: 0.09 Pounds

  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length
  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • For wood, MDF, HDF, solid wood, epoxy board, PVC, plastic
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box
  • APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc; suitable for side milling, end milling, finish machining, etc.
  • PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology; long service life, not easy to break; excellent cutting results and enhanced productivity
  • SPECIFICATION. Ball nose, 2-flute, HRC55 with tialn coated
  • SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc.
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best.
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm.
  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
  • For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated
  • Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
  • Package contents ---- 10pcs fluted tungsten steel spiral upcut ball nose bits assorted in storage case
  • Perfect cutting ---- the design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal
  • High efficiency ---- these bits own sharp edge which is able for fast engraving that makes high efficiency; durable, high precision and not easy to break; it is smokeless and burr-free while processing
  • Dimensions ---- diameter : 1/8 (3.175mm); cutting edge diameter : 2mm; cutting edge length (CEL)/flute length: 17mm; overall length: 38.5mm
  • Range of processing ---- for cutting/engraving/carving/sculpturing/roughing/milling in materials like MDF, ABS, PVC, acrylic, density board, wood, plywood, rosewood, hardwood etc.
  • Polished to a mirror finish from a solid carbide rod for precision & accuracy
  • For use on CNC, table mount and handheld routers
  • Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool
  • For smooth contour 3D CNC milling and carving
  • This 2 flute round nose endmill has a cutting diameter of 1/4" and a cutting length of 3/4". The shank is 1/4" and the overall length is 2-1/2".

More Info

1    2    3    4    5    6    7    8    9    10