Best Ball Nose End Mills. HHIP brand. New releases 2021

HHIP 8001-0006 2-Flute M2 Ball Nose End Mill Set, 1/8"-1/2", 6 Piece

More from Industrial & Scientific
Search only HHIP brand name
HHIP 8001-0006 2-Flute M2 Ball Nose End Mill Set, 1/8

Current price: 50.51 USD

Saving: $2.66 (5%)


Check price and availability


Height: 5.99999999388 Inches

Length: 3.99999999592 Inches

Width: 7.99999999184 Inches

Weight: 0.54 Pounds

  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut

More Info

HHIP 5841-0312 5/16 x 3/8" 2 Flute High Speed Steel Single End Ball End Mill

More from Industrial & Scientific
Search only HHIP brand name
HHIP 5841-0312 5/16 x 3/8

Current price: 11.59 USD


Check price and availability


Height: 6 Inches

Length: 3 Inches

Width: 1 Inches

Weight: 0.04960400895 Pounds

  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • Overall length is 2-1/2".
  • Shank diamter is 3/8".
  • Cutting length is 3/4".
  • Cutting diameter is 5/16".

More Info

HHIP 2 Flute M42 Cobalt Single End Ball End Mills (Various Sizes: 1/8" - 1")

More from Industrial & Scientific
Search only HHIP brand name
HHIP 2 Flute M42 Cobalt Single End Ball End Mills (Various Sizes: 1/8

Current price: 20.76 USD


Check price and availability


Height: 6 Inches

Length: 3 Inches

Width: 1 Inches

Weight: 0.04960400895 Pounds

  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • Overall length is 2-1/2".
  • Shank diamter is 3/8".
  • Cutting length is 3/4".
  • Cutting diameter is 5/16".
  • Overall length is 2-5/16".
  • Shank diamter is 3/8".
  • Cutting length is 3/8".
  • Cutting diameter is 1/8".
  • M42 (8%) cobalt.

More Info

HHIP 5826-0501 1/2 x 1/2" TiN 2 Flute High Speed Steel Single End Center Cut End Mill

More from Industrial & Scientific
Search only HHIP brand name
HHIP 5826-0501 1/2 x 1/2

Current price: 12.72 USD


Check price and availability


Height: 6 Inches

Length: 3 Inches

Width: 1 Inches

Weight: 0.14 Pounds

  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • Overall length is 2-1/2".
  • Shank diamter is 3/8".
  • Cutting length is 3/4".
  • Cutting diameter is 5/16".
  • Overall length is 2-5/16".
  • Shank diamter is 3/8".
  • Cutting length is 3/8".
  • Cutting diameter is 1/8".
  • M42 (8%) cobalt.
  • Used for general purpose machining of both ferrous and nonferrous materials
  • Preferred for small and medium removal rates on soft, tough and long chip materials such as aluminum, copper & brass
  • Used for slotting, ramping, pocketing and plunging operations
  • Center Cutting
  • Ground From Solid

More Info

HHIP 5830-0002 1/32" 2 Flute Mini High Speed Steel Double End End Mill

More from Industrial & Scientific
Search only HHIP brand name
HHIP 5830-0002 1/32

Current price: 7.6 USD


Check price and availability


Height: 6 Inches

Length: 3 Inches

Width: 1 Inches

Weight: 0.01 Pounds

  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • Overall length is 2-1/2".
  • Shank diamter is 3/8".
  • Cutting length is 3/4".
  • Cutting diameter is 5/16".
  • Overall length is 2-5/16".
  • Shank diamter is 3/8".
  • Cutting length is 3/8".
  • Cutting diameter is 1/8".
  • M42 (8%) cobalt.
  • Used for general purpose machining of both ferrous and nonferrous materials
  • Preferred for small and medium removal rates on soft, tough and long chip materials such as aluminum, copper & brass
  • Used for slotting, ramping, pocketing and plunging operations
  • Center Cutting
  • Ground From Solid
  • Cutting lenthg is 3/32".
  • Cutting diameter is 1/32".
  • The medium-high helix angle produces and Ideal shearing cut for outstanding performance
  • Popular for small slotting, engraving, pocketing and similar applications
  • 3/16" Shank

More Info

HHIP 5835-0375 3/8 x 3/8" 4 Flute M42 Cobalt Single End Center Cut End Mill

More from Industrial & Scientific
Search only HHIP brand name
HHIP 5835-0375 3/8 x 3/8

Current price: 16.37 USD


Check price and availability


Height: 6 Inches

Length: 3 Inches

Width: 1 Inches

Weight: 0.04960400895 Pounds

  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • Overall length is 2-1/2".
  • Shank diamter is 3/8".
  • Cutting length is 3/4".
  • Cutting diameter is 5/16".
  • Overall length is 2-5/16".
  • Shank diamter is 3/8".
  • Cutting length is 3/8".
  • Cutting diameter is 1/8".
  • M42 (8%) cobalt.
  • Used for general purpose machining of both ferrous and nonferrous materials
  • Preferred for small and medium removal rates on soft, tough and long chip materials such as aluminum, copper & brass
  • Used for slotting, ramping, pocketing and plunging operations
  • Center Cutting
  • Ground From Solid
  • Cutting lenthg is 3/32".
  • Cutting diameter is 1/32".
  • The medium-high helix angle produces and Ideal shearing cut for outstanding performance
  • Popular for small slotting, engraving, pocketing and similar applications
  • 3/16" Shank
  • Choose cobalt end mills on hard work materials or when there is a problem with wear or short tool life
  • 8% M42 Cobalt is designed to cut difficult and abrasive materials ranging from medium to high hardness
  • For profiling, shoulder milling and finishing operations
  • Center Cutting
  • Ground From Solid

More Info

HHIP 8002-5727 4 Flute M42 Cobalt Roughing End Mill, 3/8" x 3/8" x 1-1/2" x 3-1/4"

More from Industrial & Scientific
Search only HHIP brand name
HHIP 8002-5727 4 Flute M42 Cobalt Roughing End Mill, 3/8

Current price: 19.9 USD

Saving: $1.27 (6%)


Check price and availability


Height: 6 Inches

Length: 3 Inches

Width: 1 Inches

Weight: 0.0992080179 Pounds

  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • Overall length is 2-1/2".
  • Shank diamter is 3/8".
  • Cutting length is 3/4".
  • Cutting diameter is 5/16".
  • Overall length is 2-5/16".
  • Shank diamter is 3/8".
  • Cutting length is 3/8".
  • Cutting diameter is 1/8".
  • M42 (8%) cobalt.
  • Used for general purpose machining of both ferrous and nonferrous materials
  • Preferred for small and medium removal rates on soft, tough and long chip materials such as aluminum, copper & brass
  • Used for slotting, ramping, pocketing and plunging operations
  • Center Cutting
  • Ground From Solid
  • Cutting lenthg is 3/32".
  • Cutting diameter is 1/32".
  • The medium-high helix angle produces and Ideal shearing cut for outstanding performance
  • Popular for small slotting, engraving, pocketing and similar applications
  • 3/16" Shank
  • Choose cobalt end mills on hard work materials or when there is a problem with wear or short tool life
  • 8% M42 Cobalt is designed to cut difficult and abrasive materials ranging from medium to high hardness
  • For profiling, shoulder milling and finishing operations
  • Center Cutting
  • Ground From Solid
  • Their uniform cutting load per tooth assures minimum chatter deflection
  • Uncoated
  • Center cutting
  • 8% cobalt
  • Ground From Solid M42 Blank

More Info

HHIP 8003-0025 Uncoated Solid Carbide Single End Mill, 2-Flute, 1/4" Diameter, 1/4" Shank, 3/4" Flute Length

More from Industrial & Scientific
Search only HHIP brand name
HHIP 8003-0025 Uncoated Solid Carbide Single End Mill, 2-Flute, 1/4

Current price: 19.46 USD


Check price and availability


Height: 6 Inches

Length: 3 Inches

Width: 1 Inches

Weight: 0.05 Pounds

  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • Overall length is 2-1/2".
  • Shank diamter is 3/8".
  • Cutting length is 3/4".
  • Cutting diameter is 5/16".
  • Overall length is 2-5/16".
  • Shank diamter is 3/8".
  • Cutting length is 3/8".
  • Cutting diameter is 1/8".
  • M42 (8%) cobalt.
  • Used for general purpose machining of both ferrous and nonferrous materials
  • Preferred for small and medium removal rates on soft, tough and long chip materials such as aluminum, copper & brass
  • Used for slotting, ramping, pocketing and plunging operations
  • Center Cutting
  • Ground From Solid
  • Cutting lenthg is 3/32".
  • Cutting diameter is 1/32".
  • The medium-high helix angle produces and Ideal shearing cut for outstanding performance
  • Popular for small slotting, engraving, pocketing and similar applications
  • 3/16" Shank
  • Choose cobalt end mills on hard work materials or when there is a problem with wear or short tool life
  • 8% M42 Cobalt is designed to cut difficult and abrasive materials ranging from medium to high hardness
  • For profiling, shoulder milling and finishing operations
  • Center Cutting
  • Ground From Solid
  • Their uniform cutting load per tooth assures minimum chatter deflection
  • Uncoated
  • Center cutting
  • 8% cobalt
  • Ground From Solid M42 Blank
  • Made in the USA
  • Center cutting
  • Regular length
  • Submicron grain carbide
  • For milling lower strength materials, offers the maximum flute volume for chip removal

More Info

HHIP 5829-0375 3/8 x 3/8" 4 Flute TiN Double End Center Cut End Mill

More from Industrial & Scientific
Search only HHIP brand name
HHIP 5829-0375 3/8 x 3/8

Current price: 13.56 USD


Check price and availability


Height: 6 Inches

Length: 3 Inches

Width: 1 Inches

Weight: 0.0992080179 Pounds

  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • Overall length is 2-1/2".
  • Shank diamter is 3/8".
  • Cutting length is 3/4".
  • Cutting diameter is 5/16".
  • Overall length is 2-5/16".
  • Shank diamter is 3/8".
  • Cutting length is 3/8".
  • Cutting diameter is 1/8".
  • M42 (8%) cobalt.
  • Used for general purpose machining of both ferrous and nonferrous materials
  • Preferred for small and medium removal rates on soft, tough and long chip materials such as aluminum, copper & brass
  • Used for slotting, ramping, pocketing and plunging operations
  • Center Cutting
  • Ground From Solid
  • Cutting lenthg is 3/32".
  • Cutting diameter is 1/32".
  • The medium-high helix angle produces and Ideal shearing cut for outstanding performance
  • Popular for small slotting, engraving, pocketing and similar applications
  • 3/16" Shank
  • Choose cobalt end mills on hard work materials or when there is a problem with wear or short tool life
  • 8% M42 Cobalt is designed to cut difficult and abrasive materials ranging from medium to high hardness
  • For profiling, shoulder milling and finishing operations
  • Center Cutting
  • Ground From Solid
  • Their uniform cutting load per tooth assures minimum chatter deflection
  • Uncoated
  • Center cutting
  • 8% cobalt
  • Ground From Solid M42 Blank
  • Made in the USA
  • Center cutting
  • Regular length
  • Submicron grain carbide
  • For milling lower strength materials, offers the maximum flute volume for chip removal
  • The TiN coating will improve the tool life and is used where elevated speeds & feeds are the objective
  • Gold in color, this is an excellent general purpose PVD coating that is suitable for a wide range o materials
  • For profiling, shoulder milling and finishing operations
  • Center Cutting
  • Ground From Solid

More Info

HHIP 4952-0004 2 and 4 Flute End Mill Set, 3/8" Edge and Center Finder, Center Drills

More from Industrial & Scientific
Search only HHIP brand name
HHIP 4952-0004 2 and 4 Flute End Mill Set, 3/8

Current price: 159.04 USD


Check price and availability


Height: 4 Inches

Length: 11 Inches

Width: 5 Inches

Weight: 3 Pounds

  • High speed steel
  • Designed for milling radius bottom slots, fillets and special contours
  • Full radius cutting edge
  • Single end
  • Center Cut
  • Overall length is 2-1/2".
  • Shank diamter is 3/8".
  • Cutting length is 3/4".
  • Cutting diameter is 5/16".
  • Overall length is 2-5/16".
  • Shank diamter is 3/8".
  • Cutting length is 3/8".
  • Cutting diameter is 1/8".
  • M42 (8%) cobalt.
  • Used for general purpose machining of both ferrous and nonferrous materials
  • Preferred for small and medium removal rates on soft, tough and long chip materials such as aluminum, copper & brass
  • Used for slotting, ramping, pocketing and plunging operations
  • Center Cutting
  • Ground From Solid
  • Cutting lenthg is 3/32".
  • Cutting diameter is 1/32".
  • The medium-high helix angle produces and Ideal shearing cut for outstanding performance
  • Popular for small slotting, engraving, pocketing and similar applications
  • 3/16" Shank
  • Choose cobalt end mills on hard work materials or when there is a problem with wear or short tool life
  • 8% M42 Cobalt is designed to cut difficult and abrasive materials ranging from medium to high hardness
  • For profiling, shoulder milling and finishing operations
  • Center Cutting
  • Ground From Solid
  • Their uniform cutting load per tooth assures minimum chatter deflection
  • Uncoated
  • Center cutting
  • 8% cobalt
  • Ground From Solid M42 Blank
  • Made in the USA
  • Center cutting
  • Regular length
  • Submicron grain carbide
  • For milling lower strength materials, offers the maximum flute volume for chip removal
  • The TiN coating will improve the tool life and is used where elevated speeds & feeds are the objective
  • Gold in color, this is an excellent general purpose PVD coating that is suitable for a wide range o materials
  • For profiling, shoulder milling and finishing operations
  • Center Cutting
  • Ground From Solid
  • The finder has a 0. 200" tip diameter and accuracy is . 0002"
  • Combination edge and center finder is hardened and ground all over
  • The end mill set is center cut and 3/16-3/4" by 16ths
  • End mill set is titanium coated high speed steel for longer life

More Info

1    2