Best Arc Welding Electrode Holders. Reviews June, 2021

Welding Electrode Holder Cuwiny 300AMP Copper Electrode Clamp Jaw Holding Plier Fit for ARC Welder Welding Machine Stick Electrode Welding American Design

Search only Cuwiny brand name
Welding Electrode Holder Cuwiny 300AMP Copper Electrode Clamp Jaw Holding Plier Fit for ARC Welder Welding Machine Stick Electrode Welding American Design

Current price: 13.99 USD


Check price and availability


Weight: 1 Pounds

  • Satisfactory after-sales service:Cuwiny products have 1 Year after-sales customers service guarantee.Please contact us for any assistance.
  • The high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding.
  • Fit for Arc Welder 200A 300AMP etc,Suit for various kinds of Stick Welding Rods Electrodes etc.
  • Used # 1 AWG Gauge Cable and High-quality Copper.
  • This Electrode holder is Made of high quality Copper materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection. (New product promotion, only this week. Reviews and feedback, contact us for 20% off.)

More Info

Welding Electrode Holder 300AMP Copper Heavy Duty Jaw Holding Plier Electrode Clamp of Welding Machine ARC Welder American Design

Search only Reboot brand name
Welding Electrode Holder 300AMP Copper Heavy Duty Jaw Holding Plier Electrode Clamp of Welding Machine ARC Welder American Design

Current price: 15.99 USD


Check price and availability


Height: 1.6 Inches

Length: 9.8 Inches

Width: 3.4 Inches

Weight: 1.1 Pounds

  • Satisfactory after-sales service:Cuwiny products have 1 Year after-sales customers service guarantee.Please contact us for any assistance.
  • The high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding.
  • Fit for Arc Welder 200A 300AMP etc,Suit for various kinds of Stick Welding Rods Electrodes etc.
  • Used # 1 AWG Gauge Cable and High-quality Copper.
  • This Electrode holder is Made of high quality Copper materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection. (New product promotion, only this week. Reviews and feedback, contact us for 20% off.)
  • 🛒100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance.
  • 🛒Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet
  • 🛒Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc.
  • 🛒Used # 1 AWG Gauge Cable
  • 🛒Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity.

More Info

T TOVIA Stick Welding Electrode Holder ARC Stick Manual Screw Twist Type Head, 200 Amp

Search only T TOVIA brand name
T TOVIA Stick Welding Electrode Holder ARC Stick Manual Screw Twist Type Head, 200 Amp

Current price: 18.99 USD


Check price and availability


  • Satisfactory after-sales service:Cuwiny products have 1 Year after-sales customers service guarantee.Please contact us for any assistance.
  • The high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding.
  • Fit for Arc Welder 200A 300AMP etc,Suit for various kinds of Stick Welding Rods Electrodes etc.
  • Used # 1 AWG Gauge Cable and High-quality Copper.
  • This Electrode holder is Made of high quality Copper materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection. (New product promotion, only this week. Reviews and feedback, contact us for 20% off.)
  • 🛒100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance.
  • 🛒Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet
  • 🛒Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc.
  • 🛒Used # 1 AWG Gauge Cable
  • 🛒Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity.
  • 【Bottom protection handle】The base of the handle has a rubber that surrounds the wire preventing debris and water to some extent from entering the handle.
  • 【Insulated rubber handle】Insulated rubber handle with copper core for both high conductivity and improved cable connections.
  • 【Visible, burnable electrode to the end】Round DMC head provides increased visibility, and allows rod to be burnt to the end.
  • 【 a variety of welding applications】Firmly holds electrodes up to 5/32" (4mm) diameter in 45° or 90° positions to accommodate a variety of welding applications.
  • 【Insulated head for better control】Fully insulated head mechanically holds the stick electrode tight for easy bending & better arc control eliminating arc out problems.

More Info

Welding Electrode Holder 800AMP Copper Electrode Holder Welding Stick Rod Clamp Heat Resistant for MMA ARC Welder

Search only Vikye brand name
Welding Electrode Holder 800AMP Copper Electrode Holder Welding Stick Rod Clamp Heat Resistant for MMA ARC Welder

Current price: 13.19 USD


Check price and availability


Height: 1.181102361 Inches

Length: 8.267716527 Inches

Width: 2.9527559025 Inches

Weight: 0.6834330122 Pounds

  • Satisfactory after-sales service:Cuwiny products have 1 Year after-sales customers service guarantee.Please contact us for any assistance.
  • The high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding.
  • Fit for Arc Welder 200A 300AMP etc,Suit for various kinds of Stick Welding Rods Electrodes etc.
  • Used # 1 AWG Gauge Cable and High-quality Copper.
  • This Electrode holder is Made of high quality Copper materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection. (New product promotion, only this week. Reviews and feedback, contact us for 20% off.)
  • 🛒100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance.
  • 🛒Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet
  • 🛒Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc.
  • 🛒Used # 1 AWG Gauge Cable
  • 🛒Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity.
  • 【Bottom protection handle】The base of the handle has a rubber that surrounds the wire preventing debris and water to some extent from entering the handle.
  • 【Insulated rubber handle】Insulated rubber handle with copper core for both high conductivity and improved cable connections.
  • 【Visible, burnable electrode to the end】Round DMC head provides increased visibility, and allows rod to be burnt to the end.
  • 【 a variety of welding applications】Firmly holds electrodes up to 5/32" (4mm) diameter in 45° or 90° positions to accommodate a variety of welding applications.
  • 【Insulated head for better control】Fully insulated head mechanically holds the stick electrode tight for easy bending & better arc control eliminating arc out problems.
  • This is a good helper for welding working which can make sure the safety
  • Ergonomically designed for comfort during welding.
  • The upper and lower clips are made of composite material, which is resistant to high temperature and high flame retardant.
  • It is protected by strong spring insulation sleeve to ensure that the welding rod is stable and not easy to fall off.
  • Use high-quality pure copper to increase the conductor, the conductivity is strong, and the temperature rise is lower.

More Info

300 Amp Welding Electrode Holder ESAB MMA ARC Stick Manual Head-Screw twist type

Search only ESAB AB brand name
300 Amp Welding Electrode Holder ESAB MMA ARC Stick Manual Head-Screw twist type

Current price: 39.5 USD


Check price and availability


  • Satisfactory after-sales service:Cuwiny products have 1 Year after-sales customers service guarantee.Please contact us for any assistance.
  • The high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding.
  • Fit for Arc Welder 200A 300AMP etc,Suit for various kinds of Stick Welding Rods Electrodes etc.
  • Used # 1 AWG Gauge Cable and High-quality Copper.
  • This Electrode holder is Made of high quality Copper materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection. (New product promotion, only this week. Reviews and feedback, contact us for 20% off.)
  • 🛒100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance.
  • 🛒Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet
  • 🛒Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc.
  • 🛒Used # 1 AWG Gauge Cable
  • 🛒Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity.
  • 【Bottom protection handle】The base of the handle has a rubber that surrounds the wire preventing debris and water to some extent from entering the handle.
  • 【Insulated rubber handle】Insulated rubber handle with copper core for both high conductivity and improved cable connections.
  • 【Visible, burnable electrode to the end】Round DMC head provides increased visibility, and allows rod to be burnt to the end.
  • 【 a variety of welding applications】Firmly holds electrodes up to 5/32" (4mm) diameter in 45° or 90° positions to accommodate a variety of welding applications.
  • 【Insulated head for better control】Fully insulated head mechanically holds the stick electrode tight for easy bending & better arc control eliminating arc out problems.
  • This is a good helper for welding working which can make sure the safety
  • Ergonomically designed for comfort during welding.
  • The upper and lower clips are made of composite material, which is resistant to high temperature and high flame retardant.
  • It is protected by strong spring insulation sleeve to ensure that the welding rod is stable and not easy to fall off.
  • Use high-quality pure copper to increase the conductor, the conductivity is strong, and the temperature rise is lower.
  • Reliability of fastening doesn't become worse as at other holders over time
  • Lack of uninsulated surfaces of the holder
  • Welding in hard-to-reach spots
  • Fully insulated head with 2 electrode positions - 90° for downhand & 45° for positional work
  • Reliable fixing of an electrode sure contact of the holder with an electrode

More Info

Jacazooy Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable

Search only JACAZOOY brand name
Jacazooy Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable

Current price: 25 USD


Check price and availability


  • Satisfactory after-sales service:Cuwiny products have 1 Year after-sales customers service guarantee.Please contact us for any assistance.
  • The high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding.
  • Fit for Arc Welder 200A 300AMP etc,Suit for various kinds of Stick Welding Rods Electrodes etc.
  • Used # 1 AWG Gauge Cable and High-quality Copper.
  • This Electrode holder is Made of high quality Copper materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection. (New product promotion, only this week. Reviews and feedback, contact us for 20% off.)
  • 🛒100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance.
  • 🛒Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet
  • 🛒Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc.
  • 🛒Used # 1 AWG Gauge Cable
  • 🛒Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity.
  • 【Bottom protection handle】The base of the handle has a rubber that surrounds the wire preventing debris and water to some extent from entering the handle.
  • 【Insulated rubber handle】Insulated rubber handle with copper core for both high conductivity and improved cable connections.
  • 【Visible, burnable electrode to the end】Round DMC head provides increased visibility, and allows rod to be burnt to the end.
  • 【 a variety of welding applications】Firmly holds electrodes up to 5/32" (4mm) diameter in 45° or 90° positions to accommodate a variety of welding applications.
  • 【Insulated head for better control】Fully insulated head mechanically holds the stick electrode tight for easy bending & better arc control eliminating arc out problems.
  • This is a good helper for welding working which can make sure the safety
  • Ergonomically designed for comfort during welding.
  • The upper and lower clips are made of composite material, which is resistant to high temperature and high flame retardant.
  • It is protected by strong spring insulation sleeve to ensure that the welding rod is stable and not easy to fall off.
  • Use high-quality pure copper to increase the conductor, the conductivity is strong, and the temperature rise is lower.
  • Reliability of fastening doesn't become worse as at other holders over time
  • Lack of uninsulated surfaces of the holder
  • Welding in hard-to-reach spots
  • Fully insulated head with 2 electrode positions - 90° for downhand & 45° for positional work
  • Reliable fixing of an electrode sure contact of the holder with an electrode
  • ✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error)
  • ✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
  • ✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.
  • ✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth.
  • ✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.

More Info

SÜA 500 AMP Stick Welding Electrode Holder AF50 Style

Search only SÜA brand name
SÜA 500 AMP Stick Welding Electrode Holder AF50 Style

Current price: 16.99 USD

Saving: $2.00 (11%)


Check price and availability


Weight: 1.3 Pounds

  • Satisfactory after-sales service:Cuwiny products have 1 Year after-sales customers service guarantee.Please contact us for any assistance.
  • The high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding.
  • Fit for Arc Welder 200A 300AMP etc,Suit for various kinds of Stick Welding Rods Electrodes etc.
  • Used # 1 AWG Gauge Cable and High-quality Copper.
  • This Electrode holder is Made of high quality Copper materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection. (New product promotion, only this week. Reviews and feedback, contact us for 20% off.)
  • 🛒100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance.
  • 🛒Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet
  • 🛒Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc.
  • 🛒Used # 1 AWG Gauge Cable
  • 🛒Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity.
  • 【Bottom protection handle】The base of the handle has a rubber that surrounds the wire preventing debris and water to some extent from entering the handle.
  • 【Insulated rubber handle】Insulated rubber handle with copper core for both high conductivity and improved cable connections.
  • 【Visible, burnable electrode to the end】Round DMC head provides increased visibility, and allows rod to be burnt to the end.
  • 【 a variety of welding applications】Firmly holds electrodes up to 5/32" (4mm) diameter in 45° or 90° positions to accommodate a variety of welding applications.
  • 【Insulated head for better control】Fully insulated head mechanically holds the stick electrode tight for easy bending & better arc control eliminating arc out problems.
  • This is a good helper for welding working which can make sure the safety
  • Ergonomically designed for comfort during welding.
  • The upper and lower clips are made of composite material, which is resistant to high temperature and high flame retardant.
  • It is protected by strong spring insulation sleeve to ensure that the welding rod is stable and not easy to fall off.
  • Use high-quality pure copper to increase the conductor, the conductivity is strong, and the temperature rise is lower.
  • Reliability of fastening doesn't become worse as at other holders over time
  • Lack of uninsulated surfaces of the holder
  • Welding in hard-to-reach spots
  • Fully insulated head with 2 electrode positions - 90° for downhand & 45° for positional work
  • Reliable fixing of an electrode sure contact of the holder with an electrode
  • ✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error)
  • ✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
  • ✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.
  • ✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth.
  • ✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • Holds Electrodes up to 3/8".
  • Cable Size: Up to AWG 4/0.
  • Maximum Amperage: 500 A.
  • High quality Electrode Holder AF-50 Style.

More Info

300A Welding Electrode Holder Clamp Style Casting Brass Materials for Arc MMA Welder,Black

Search only Lissam brand name
300A Welding Electrode Holder Clamp Style Casting Brass Materials for Arc MMA Welder,Black

Current price: 18.99 USD


Check price and availability


  • Satisfactory after-sales service:Cuwiny products have 1 Year after-sales customers service guarantee.Please contact us for any assistance.
  • The high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding.
  • Fit for Arc Welder 200A 300AMP etc,Suit for various kinds of Stick Welding Rods Electrodes etc.
  • Used # 1 AWG Gauge Cable and High-quality Copper.
  • This Electrode holder is Made of high quality Copper materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection. (New product promotion, only this week. Reviews and feedback, contact us for 20% off.)
  • 🛒100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance.
  • 🛒Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet
  • 🛒Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc.
  • 🛒Used # 1 AWG Gauge Cable
  • 🛒Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity.
  • 【Bottom protection handle】The base of the handle has a rubber that surrounds the wire preventing debris and water to some extent from entering the handle.
  • 【Insulated rubber handle】Insulated rubber handle with copper core for both high conductivity and improved cable connections.
  • 【Visible, burnable electrode to the end】Round DMC head provides increased visibility, and allows rod to be burnt to the end.
  • 【 a variety of welding applications】Firmly holds electrodes up to 5/32" (4mm) diameter in 45° or 90° positions to accommodate a variety of welding applications.
  • 【Insulated head for better control】Fully insulated head mechanically holds the stick electrode tight for easy bending & better arc control eliminating arc out problems.
  • This is a good helper for welding working which can make sure the safety
  • Ergonomically designed for comfort during welding.
  • The upper and lower clips are made of composite material, which is resistant to high temperature and high flame retardant.
  • It is protected by strong spring insulation sleeve to ensure that the welding rod is stable and not easy to fall off.
  • Use high-quality pure copper to increase the conductor, the conductivity is strong, and the temperature rise is lower.
  • Reliability of fastening doesn't become worse as at other holders over time
  • Lack of uninsulated surfaces of the holder
  • Welding in hard-to-reach spots
  • Fully insulated head with 2 electrode positions - 90° for downhand & 45° for positional work
  • Reliable fixing of an electrode sure contact of the holder with an electrode
  • ✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error)
  • ✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
  • ✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.
  • ✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth.
  • ✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • Holds Electrodes up to 3/8".
  • Cable Size: Up to AWG 4/0.
  • Maximum Amperage: 500 A.
  • High quality Electrode Holder AF-50 Style.
  • HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections.
  • MATERIALS:Casting brass.PACKAGE:1 electrode holder included.
  • CONVENIENT:The electrode holder is with a comfortable insulated handle and easy to operate with.
  • ACCEPT UP TO No. 2 welding cable.The electrode holder can hold electrodes up to 5/32 Inch
  • GREAT FOR most Arc, MMA, Hand Stick welding jobs

More Info

200A Welding Electrode Holder Clamp Style Forging Brass Materials for Arc MMA Welder,Red

Search only Lissam brand name
200A Welding Electrode Holder Clamp Style Forging Brass Materials for Arc MMA Welder,Red

Current price: 15.99 USD


Check price and availability


  • Satisfactory after-sales service:Cuwiny products have 1 Year after-sales customers service guarantee.Please contact us for any assistance.
  • The high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding.
  • Fit for Arc Welder 200A 300AMP etc,Suit for various kinds of Stick Welding Rods Electrodes etc.
  • Used # 1 AWG Gauge Cable and High-quality Copper.
  • This Electrode holder is Made of high quality Copper materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection. (New product promotion, only this week. Reviews and feedback, contact us for 20% off.)
  • 🛒100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance.
  • 🛒Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet
  • 🛒Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc.
  • 🛒Used # 1 AWG Gauge Cable
  • 🛒Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity.
  • 【Bottom protection handle】The base of the handle has a rubber that surrounds the wire preventing debris and water to some extent from entering the handle.
  • 【Insulated rubber handle】Insulated rubber handle with copper core for both high conductivity and improved cable connections.
  • 【Visible, burnable electrode to the end】Round DMC head provides increased visibility, and allows rod to be burnt to the end.
  • 【 a variety of welding applications】Firmly holds electrodes up to 5/32" (4mm) diameter in 45° or 90° positions to accommodate a variety of welding applications.
  • 【Insulated head for better control】Fully insulated head mechanically holds the stick electrode tight for easy bending & better arc control eliminating arc out problems.
  • This is a good helper for welding working which can make sure the safety
  • Ergonomically designed for comfort during welding.
  • The upper and lower clips are made of composite material, which is resistant to high temperature and high flame retardant.
  • It is protected by strong spring insulation sleeve to ensure that the welding rod is stable and not easy to fall off.
  • Use high-quality pure copper to increase the conductor, the conductivity is strong, and the temperature rise is lower.
  • Reliability of fastening doesn't become worse as at other holders over time
  • Lack of uninsulated surfaces of the holder
  • Welding in hard-to-reach spots
  • Fully insulated head with 2 electrode positions - 90° for downhand & 45° for positional work
  • Reliable fixing of an electrode sure contact of the holder with an electrode
  • ✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error)
  • ✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
  • ✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.
  • ✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth.
  • ✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • Holds Electrodes up to 3/8".
  • Cable Size: Up to AWG 4/0.
  • Maximum Amperage: 500 A.
  • High quality Electrode Holder AF-50 Style.
  • HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections.
  • MATERIALS:Casting brass.PACKAGE:1 electrode holder included.
  • CONVENIENT:The electrode holder is with a comfortable insulated handle and easy to operate with.
  • ACCEPT UP TO No. 2 welding cable.The electrode holder can hold electrodes up to 5/32 Inch
  • GREAT FOR most Arc, MMA, Hand Stick welding jobs
  • HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections.
  • MATERIALS:Forging brass.PACKAGE:1 electrode holder included.
  • CONVENIENT:The electrode holder is with a comfortable insulated handle and easy to operate with.
  • ACCEPT UP TO No. 2 welding cable.The electrode holder can hold electrodes up to 5/32 Inch
  • GREAT FOR most Arc, MMA, Hand Stick welding jobs

More Info

200 AMP ESAB CONFORT Welding Electrode Holder MMA ARC Stick Manual open head style (200 AMP)

Search only ESAB AB brand name
200 AMP ESAB CONFORT Welding Electrode Holder MMA ARC Stick Manual open head style (200 AMP)

Current price: 36.5 USD


Check price and availability


  • Satisfactory after-sales service:Cuwiny products have 1 Year after-sales customers service guarantee.Please contact us for any assistance.
  • The high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding.
  • Fit for Arc Welder 200A 300AMP etc,Suit for various kinds of Stick Welding Rods Electrodes etc.
  • Used # 1 AWG Gauge Cable and High-quality Copper.
  • This Electrode holder is Made of high quality Copper materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection. (New product promotion, only this week. Reviews and feedback, contact us for 20% off.)
  • 🛒100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance.
  • 🛒Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet
  • 🛒Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc.
  • 🛒Used # 1 AWG Gauge Cable
  • 🛒Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity.
  • 【Bottom protection handle】The base of the handle has a rubber that surrounds the wire preventing debris and water to some extent from entering the handle.
  • 【Insulated rubber handle】Insulated rubber handle with copper core for both high conductivity and improved cable connections.
  • 【Visible, burnable electrode to the end】Round DMC head provides increased visibility, and allows rod to be burnt to the end.
  • 【 a variety of welding applications】Firmly holds electrodes up to 5/32" (4mm) diameter in 45° or 90° positions to accommodate a variety of welding applications.
  • 【Insulated head for better control】Fully insulated head mechanically holds the stick electrode tight for easy bending & better arc control eliminating arc out problems.
  • This is a good helper for welding working which can make sure the safety
  • Ergonomically designed for comfort during welding.
  • The upper and lower clips are made of composite material, which is resistant to high temperature and high flame retardant.
  • It is protected by strong spring insulation sleeve to ensure that the welding rod is stable and not easy to fall off.
  • Use high-quality pure copper to increase the conductor, the conductivity is strong, and the temperature rise is lower.
  • Reliability of fastening doesn't become worse as at other holders over time
  • Lack of uninsulated surfaces of the holder
  • Welding in hard-to-reach spots
  • Fully insulated head with 2 electrode positions - 90° for downhand & 45° for positional work
  • Reliable fixing of an electrode sure contact of the holder with an electrode
  • ✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error)
  • ✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
  • ✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.
  • ✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth.
  • ✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • Holds Electrodes up to 3/8".
  • Cable Size: Up to AWG 4/0.
  • Maximum Amperage: 500 A.
  • High quality Electrode Holder AF-50 Style.
  • HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections.
  • MATERIALS:Casting brass.PACKAGE:1 electrode holder included.
  • CONVENIENT:The electrode holder is with a comfortable insulated handle and easy to operate with.
  • ACCEPT UP TO No. 2 welding cable.The electrode holder can hold electrodes up to 5/32 Inch
  • GREAT FOR most Arc, MMA, Hand Stick welding jobs
  • HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections.
  • MATERIALS:Forging brass.PACKAGE:1 electrode holder included.
  • CONVENIENT:The electrode holder is with a comfortable insulated handle and easy to operate with.
  • ACCEPT UP TO No. 2 welding cable.The electrode holder can hold electrodes up to 5/32 Inch
  • GREAT FOR most Arc, MMA, Hand Stick welding jobs

More Info

1    2    3    4    5    6    7    8    9    10