Best Air Compressors . ARB brand. New releases 2021

ARB CKMTA12 '12V' On-Board Twin High Performance Air Compressor

More from Automotive Parts & Accessories
Search only ARB brand name
ARB CKMTA12 '12V' On-Board Twin High Performance Air Compressor

Current price: 674.95 USD


Check price and availability


Height: 4.72 Inches

Length: 19.69 Inches

Width: 10.24 Inches

Weight: 0.1 Pounds

  • 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
  • 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.

More Info

ARB 4X4 Accessories Digital Tire Inflator Bundle with Tire Inflation Kit for Air Compressors and E-Z Deflator Kit

More from Automotive Parts & Accessories
Search only ARB brand name
ARB 4X4 Accessories Digital Tire Inflator Bundle with Tire Inflation Kit for Air Compressors and E-Z Deflator Kit

Current price: 150 USD


Check price and availability


Height: 10 Inches

Length: 13 Inches

Width: 10 Inches

Weight: 17 Pounds

  • 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
  • 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
  • E-Z DEFLATOR KIT Corrosion Resistant Brass/Stainless Deflator Tool Quality Bronze Bourdon Tube Gauge Design Ensures Accuracy is Not Affected by Changes in Temperature, Humidity or Altitude Fully Geared, Solid Brass Precision Movement Protective Rubber Gauge Guard Easy to Read Dial with One PSI Increments Thoroughly Designed and Tested to Ensure Accuracy Includes Protective Canvas Pouch and Instruction Sheet
  • Technical Specifications: 1/4 NPT Female (suites ARB fittings, included) Batteries - x2 AAA (supplied) Battery Life - up to 200 hours Auto switch on and auto switch off Size: Without Hose - 8.2" L x 2.95" W x 2.95" H With Hose - 29.5" L x 2.95" W x 2.95" H
  • Digital Tire Inflator Specs : Large LCD Digital readouts with blue backlight, Battery indicator, Multiple measurements (Scale: 0-200 PSI / 0-14 Bar / 0-1400 KPA), Rubber bump guard to protect against drops and knocks, Coated thumb trigger, 23.5 inch dual swivel PVC coated braided hose, Push on chuck type, Accuracy to +/- 1 PSI within 25-75 PSI range, Max Supply pressure - 350 PSI, 240 KPA, Up to 200 hours runtime on set of batteries.
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the CKMA12 ARB air compressor an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
  • Boost Projects Custom Kit Includes: ARB Digital Tire Inflator & Tire Inflation Kit For Air Compressors & E-Z Deflator Kit

More Info

ARB 171503 Air Compressor Manifold Kit

More from Automotive Parts & Accessories
Search only ARB brand name
ARB 171503 Air Compressor Manifold Kit

Current price: 80 USD


Check price and availability


Height: 2.36 Inches

Length: 8.27 Inches

Width: 6.69 Inches

Weight: 1 Pounds

  • 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
  • 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
  • E-Z DEFLATOR KIT Corrosion Resistant Brass/Stainless Deflator Tool Quality Bronze Bourdon Tube Gauge Design Ensures Accuracy is Not Affected by Changes in Temperature, Humidity or Altitude Fully Geared, Solid Brass Precision Movement Protective Rubber Gauge Guard Easy to Read Dial with One PSI Increments Thoroughly Designed and Tested to Ensure Accuracy Includes Protective Canvas Pouch and Instruction Sheet
  • Technical Specifications: 1/4 NPT Female (suites ARB fittings, included) Batteries - x2 AAA (supplied) Battery Life - up to 200 hours Auto switch on and auto switch off Size: Without Hose - 8.2" L x 2.95" W x 2.95" H With Hose - 29.5" L x 2.95" W x 2.95" H
  • Digital Tire Inflator Specs : Large LCD Digital readouts with blue backlight, Battery indicator, Multiple measurements (Scale: 0-200 PSI / 0-14 Bar / 0-1400 KPA), Rubber bump guard to protect against drops and knocks, Coated thumb trigger, 23.5 inch dual swivel PVC coated braided hose, Push on chuck type, Accuracy to +/- 1 PSI within 25-75 PSI range, Max Supply pressure - 350 PSI, 240 KPA, Up to 200 hours runtime on set of batteries.
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the CKMA12 ARB air compressor an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
  • Boost Projects Custom Kit Includes: ARB Digital Tire Inflator & Tire Inflation Kit For Air Compressors & E-Z Deflator Kit
  • This manifold permits you to lock the front and rear air lockers without needing a compressor for each.
  • This kit includes a manifold body with mounting bracket, BSPP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit.
  • Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits.
  • Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor

More Info

ARB 4X4 Accessories Ultimate Wheeler Pack Hd Air Compressor and Pump Up Kit and E-Z Tire Deflator

More from Automotive Parts & Accessories
Search only ARB brand name
ARB 4X4 Accessories Ultimate Wheeler Pack Hd Air Compressor and Pump Up Kit and E-Z Tire Deflator

Current price: 402.14 USD


Check price and availability


Height: 7 Inches

Length: 19 Inches

Width: 11 Inches

Weight: 19 Pounds

  • 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
  • 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
  • E-Z DEFLATOR KIT Corrosion Resistant Brass/Stainless Deflator Tool Quality Bronze Bourdon Tube Gauge Design Ensures Accuracy is Not Affected by Changes in Temperature, Humidity or Altitude Fully Geared, Solid Brass Precision Movement Protective Rubber Gauge Guard Easy to Read Dial with One PSI Increments Thoroughly Designed and Tested to Ensure Accuracy Includes Protective Canvas Pouch and Instruction Sheet
  • Technical Specifications: 1/4 NPT Female (suites ARB fittings, included) Batteries - x2 AAA (supplied) Battery Life - up to 200 hours Auto switch on and auto switch off Size: Without Hose - 8.2" L x 2.95" W x 2.95" H With Hose - 29.5" L x 2.95" W x 2.95" H
  • Digital Tire Inflator Specs : Large LCD Digital readouts with blue backlight, Battery indicator, Multiple measurements (Scale: 0-200 PSI / 0-14 Bar / 0-1400 KPA), Rubber bump guard to protect against drops and knocks, Coated thumb trigger, 23.5 inch dual swivel PVC coated braided hose, Push on chuck type, Accuracy to +/- 1 PSI within 25-75 PSI range, Max Supply pressure - 350 PSI, 240 KPA, Up to 200 hours runtime on set of batteries.
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the CKMA12 ARB air compressor an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
  • Boost Projects Custom Kit Includes: ARB Digital Tire Inflator & Tire Inflation Kit For Air Compressors & E-Z Deflator Kit
  • This manifold permits you to lock the front and rear air lockers without needing a compressor for each.
  • This kit includes a manifold body with mounting bracket, BSPP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit.
  • Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits.
  • Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor
  • TIRE PUMP UP KIT: For use with ARB compressor fill up deflated tires on the trail
  • EZ TIRE DEFLATOR: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate pressure reading via the simple movement of a sliding valve.
  • The ARB Air Compressor is an integral component of the air locker system. Automatic pressure activated limit switch Includes compressor, mounting hardware, pressure limit switch, wiring harness and instructions.
  • Boost Projects Custom Kit Includes: ARB Ultimate Wheeler Pack Heavy-Duty 12 VOLT Air Compressor, Pump Up Kit and E-Z Tire Deflator 4x4

More Info

ARB 4X4 Accessories Digital Tire Inflator Bundle with Tire Inflation Kit for Air Compressors

More from Automotive Parts & Accessories
Search only ARB brand name
ARB 4X4 Accessories Digital Tire Inflator Bundle with Tire Inflation Kit for Air Compressors

Current price: 107.86 USD


Check price and availability


Height: 10 Inches

Length: 10 Inches

Width: 10 Inches

Weight: 14 Pounds

  • 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
  • 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
  • E-Z DEFLATOR KIT Corrosion Resistant Brass/Stainless Deflator Tool Quality Bronze Bourdon Tube Gauge Design Ensures Accuracy is Not Affected by Changes in Temperature, Humidity or Altitude Fully Geared, Solid Brass Precision Movement Protective Rubber Gauge Guard Easy to Read Dial with One PSI Increments Thoroughly Designed and Tested to Ensure Accuracy Includes Protective Canvas Pouch and Instruction Sheet
  • Technical Specifications: 1/4 NPT Female (suites ARB fittings, included) Batteries - x2 AAA (supplied) Battery Life - up to 200 hours Auto switch on and auto switch off Size: Without Hose - 8.2" L x 2.95" W x 2.95" H With Hose - 29.5" L x 2.95" W x 2.95" H
  • Digital Tire Inflator Specs : Large LCD Digital readouts with blue backlight, Battery indicator, Multiple measurements (Scale: 0-200 PSI / 0-14 Bar / 0-1400 KPA), Rubber bump guard to protect against drops and knocks, Coated thumb trigger, 23.5 inch dual swivel PVC coated braided hose, Push on chuck type, Accuracy to +/- 1 PSI within 25-75 PSI range, Max Supply pressure - 350 PSI, 240 KPA, Up to 200 hours runtime on set of batteries.
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the CKMA12 ARB air compressor an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
  • Boost Projects Custom Kit Includes: ARB Digital Tire Inflator & Tire Inflation Kit For Air Compressors & E-Z Deflator Kit
  • This manifold permits you to lock the front and rear air lockers without needing a compressor for each.
  • This kit includes a manifold body with mounting bracket, BSPP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit.
  • Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits.
  • Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor
  • TIRE PUMP UP KIT: For use with ARB compressor fill up deflated tires on the trail
  • EZ TIRE DEFLATOR: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate pressure reading via the simple movement of a sliding valve.
  • The ARB Air Compressor is an integral component of the air locker system. Automatic pressure activated limit switch Includes compressor, mounting hardware, pressure limit switch, wiring harness and instructions.
  • Boost Projects Custom Kit Includes: ARB Ultimate Wheeler Pack Heavy-Duty 12 VOLT Air Compressor, Pump Up Kit and E-Z Tire Deflator 4x4
  • Size: Without Hose - 8.2" L x 2.95" W x 2.95" H With Hose - 29.5" L x 2.95" W x 2.95" H
  • Technical Specifications: 1/4 NPT Female (suites ARB fittings, included) Batteries - x2 AAA (supplied) Battery Life - up to 200 hours Auto switch on and auto switch off
  • Digital Tire Inflator Specs : Large LCD Digital readouts with blue backlight, Battery indicator, Multiple measurements (Scale: 0-200 PSI / 0-14 Bar / 0-1400 KPA), Rubber bump guard to protect against drops and knocks, Coated thumb trigger, 23.5 inch dual swivel PVC coated braided hose, Push on chuck type, Accuracy to +/- 1 PSI within 25-75 PSI range, Max Supply pressure - 350 PSI, 240 KPA, Up to 200 hours runtime on set of batteries.
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the CKMA12 ARB air compressor an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
  • Boost Projects Custom Kit Includes: ARB Digital Tire Inflator & Tire Inflation Kit For Air Compressors.

More Info

ARB 170201 Air Fitting,Straight,R1 5

More from Automotive Parts & Accessories
Search only ARB brand name
ARB 170201 Air Fitting,Straight,R1 5

Current price: 15.99 USD


Check price and availability


Height: 5 Inches

Length: 5 Inches

Width: 5 Inches

  • 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
  • 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
  • E-Z DEFLATOR KIT Corrosion Resistant Brass/Stainless Deflator Tool Quality Bronze Bourdon Tube Gauge Design Ensures Accuracy is Not Affected by Changes in Temperature, Humidity or Altitude Fully Geared, Solid Brass Precision Movement Protective Rubber Gauge Guard Easy to Read Dial with One PSI Increments Thoroughly Designed and Tested to Ensure Accuracy Includes Protective Canvas Pouch and Instruction Sheet
  • Technical Specifications: 1/4 NPT Female (suites ARB fittings, included) Batteries - x2 AAA (supplied) Battery Life - up to 200 hours Auto switch on and auto switch off Size: Without Hose - 8.2" L x 2.95" W x 2.95" H With Hose - 29.5" L x 2.95" W x 2.95" H
  • Digital Tire Inflator Specs : Large LCD Digital readouts with blue backlight, Battery indicator, Multiple measurements (Scale: 0-200 PSI / 0-14 Bar / 0-1400 KPA), Rubber bump guard to protect against drops and knocks, Coated thumb trigger, 23.5 inch dual swivel PVC coated braided hose, Push on chuck type, Accuracy to +/- 1 PSI within 25-75 PSI range, Max Supply pressure - 350 PSI, 240 KPA, Up to 200 hours runtime on set of batteries.
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the CKMA12 ARB air compressor an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
  • Boost Projects Custom Kit Includes: ARB Digital Tire Inflator & Tire Inflation Kit For Air Compressors & E-Z Deflator Kit
  • This manifold permits you to lock the front and rear air lockers without needing a compressor for each.
  • This kit includes a manifold body with mounting bracket, BSPP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit.
  • Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits.
  • Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor
  • TIRE PUMP UP KIT: For use with ARB compressor fill up deflated tires on the trail
  • EZ TIRE DEFLATOR: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate pressure reading via the simple movement of a sliding valve.
  • The ARB Air Compressor is an integral component of the air locker system. Automatic pressure activated limit switch Includes compressor, mounting hardware, pressure limit switch, wiring harness and instructions.
  • Boost Projects Custom Kit Includes: ARB Ultimate Wheeler Pack Heavy-Duty 12 VOLT Air Compressor, Pump Up Kit and E-Z Tire Deflator 4x4
  • Size: Without Hose - 8.2" L x 2.95" W x 2.95" H With Hose - 29.5" L x 2.95" W x 2.95" H
  • Technical Specifications: 1/4 NPT Female (suites ARB fittings, included) Batteries - x2 AAA (supplied) Battery Life - up to 200 hours Auto switch on and auto switch off
  • Digital Tire Inflator Specs : Large LCD Digital readouts with blue backlight, Battery indicator, Multiple measurements (Scale: 0-200 PSI / 0-14 Bar / 0-1400 KPA), Rubber bump guard to protect against drops and knocks, Coated thumb trigger, 23.5 inch dual swivel PVC coated braided hose, Push on chuck type, Accuracy to +/- 1 PSI within 25-75 PSI range, Max Supply pressure - 350 PSI, 240 KPA, Up to 200 hours runtime on set of batteries.
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the CKMA12 ARB air compressor an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
  • Boost Projects Custom Kit Includes: ARB Digital Tire Inflator & Tire Inflation Kit For Air Compressors.
  • This has British Standard Pipe Parallel (thread).
  • The Nylon 5mm line pushes into this for an easy connection of the ARB Air Locker Line or the Trail-Gear Rear disconnect.
  • ARB Replacement 5mm Push In Fitting (170201)

More Info

ARB CKMTA12 ARB505 On-Board Twin High Performance 12 Volt Air Compressor and E-Z Deflator Bundle

More from Automotive Parts & Accessories
Search only ARB brand name
ARB CKMTA12 ARB505 On-Board Twin High Performance 12 Volt Air Compressor and E-Z Deflator Bundle

Current price: 843.37 USD


Check price and availability


Height: 15 Inches

Length: 15 Inches

Width: 12 Inches

Weight: 15 Pounds

  • 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
  • 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
  • E-Z DEFLATOR KIT Corrosion Resistant Brass/Stainless Deflator Tool Quality Bronze Bourdon Tube Gauge Design Ensures Accuracy is Not Affected by Changes in Temperature, Humidity or Altitude Fully Geared, Solid Brass Precision Movement Protective Rubber Gauge Guard Easy to Read Dial with One PSI Increments Thoroughly Designed and Tested to Ensure Accuracy Includes Protective Canvas Pouch and Instruction Sheet
  • Technical Specifications: 1/4 NPT Female (suites ARB fittings, included) Batteries - x2 AAA (supplied) Battery Life - up to 200 hours Auto switch on and auto switch off Size: Without Hose - 8.2" L x 2.95" W x 2.95" H With Hose - 29.5" L x 2.95" W x 2.95" H
  • Digital Tire Inflator Specs : Large LCD Digital readouts with blue backlight, Battery indicator, Multiple measurements (Scale: 0-200 PSI / 0-14 Bar / 0-1400 KPA), Rubber bump guard to protect against drops and knocks, Coated thumb trigger, 23.5 inch dual swivel PVC coated braided hose, Push on chuck type, Accuracy to +/- 1 PSI within 25-75 PSI range, Max Supply pressure - 350 PSI, 240 KPA, Up to 200 hours runtime on set of batteries.
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the CKMA12 ARB air compressor an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
  • Boost Projects Custom Kit Includes: ARB Digital Tire Inflator & Tire Inflation Kit For Air Compressors & E-Z Deflator Kit
  • This manifold permits you to lock the front and rear air lockers without needing a compressor for each.
  • This kit includes a manifold body with mounting bracket, BSPP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit.
  • Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits.
  • Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor
  • TIRE PUMP UP KIT: For use with ARB compressor fill up deflated tires on the trail
  • EZ TIRE DEFLATOR: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate pressure reading via the simple movement of a sliding valve.
  • The ARB Air Compressor is an integral component of the air locker system. Automatic pressure activated limit switch Includes compressor, mounting hardware, pressure limit switch, wiring harness and instructions.
  • Boost Projects Custom Kit Includes: ARB Ultimate Wheeler Pack Heavy-Duty 12 VOLT Air Compressor, Pump Up Kit and E-Z Tire Deflator 4x4
  • Size: Without Hose - 8.2" L x 2.95" W x 2.95" H With Hose - 29.5" L x 2.95" W x 2.95" H
  • Technical Specifications: 1/4 NPT Female (suites ARB fittings, included) Batteries - x2 AAA (supplied) Battery Life - up to 200 hours Auto switch on and auto switch off
  • Digital Tire Inflator Specs : Large LCD Digital readouts with blue backlight, Battery indicator, Multiple measurements (Scale: 0-200 PSI / 0-14 Bar / 0-1400 KPA), Rubber bump guard to protect against drops and knocks, Coated thumb trigger, 23.5 inch dual swivel PVC coated braided hose, Push on chuck type, Accuracy to +/- 1 PSI within 25-75 PSI range, Max Supply pressure - 350 PSI, 240 KPA, Up to 200 hours runtime on set of batteries.
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the CKMA12 ARB air compressor an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
  • Boost Projects Custom Kit Includes: ARB Digital Tire Inflator & Tire Inflation Kit For Air Compressors.
  • This has British Standard Pipe Parallel (thread).
  • The Nylon 5mm line pushes into this for an easy connection of the ARB Air Locker Line or the Trail-Gear Rear disconnect.
  • ARB Replacement 5mm Push In Fitting (170201)
  • Fully geared, solid brass precision movement // Easy to read dial with 1 pressure per square inch increments // Includes protective canvas pouch and instruction sheet
  • ARB505: Corrosion resistant brass/stainless deflator tool // Quality bronze bourdon tube gauge design ensures accuracy is not affected by changes in temperature, humidity or altitude
  • Motors are internally thermal protected against extreme temperature damage // Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing
  • CKMTA12: Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM] // Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids; Not Included).

More Info

ARB CKMA12 171302 ARB505 Ultimate Wheeler Pack HD Air Compressor and Pump Up Kit and E-Z Tire Deflator and EVO EVO-1097 Large Air Compressor Mount

More from Automotive Parts & Accessories
Search only ARB brand name
ARB CKMA12 171302 ARB505 Ultimate Wheeler Pack HD Air Compressor and Pump Up Kit and E-Z Tire Deflator and EVO EVO-1097 Large Air Compressor Mount

Current price: 514.31 USD


Check price and availability


  • 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
  • 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
  • E-Z DEFLATOR KIT Corrosion Resistant Brass/Stainless Deflator Tool Quality Bronze Bourdon Tube Gauge Design Ensures Accuracy is Not Affected by Changes in Temperature, Humidity or Altitude Fully Geared, Solid Brass Precision Movement Protective Rubber Gauge Guard Easy to Read Dial with One PSI Increments Thoroughly Designed and Tested to Ensure Accuracy Includes Protective Canvas Pouch and Instruction Sheet
  • Technical Specifications: 1/4 NPT Female (suites ARB fittings, included) Batteries - x2 AAA (supplied) Battery Life - up to 200 hours Auto switch on and auto switch off Size: Without Hose - 8.2" L x 2.95" W x 2.95" H With Hose - 29.5" L x 2.95" W x 2.95" H
  • Digital Tire Inflator Specs : Large LCD Digital readouts with blue backlight, Battery indicator, Multiple measurements (Scale: 0-200 PSI / 0-14 Bar / 0-1400 KPA), Rubber bump guard to protect against drops and knocks, Coated thumb trigger, 23.5 inch dual swivel PVC coated braided hose, Push on chuck type, Accuracy to +/- 1 PSI within 25-75 PSI range, Max Supply pressure - 350 PSI, 240 KPA, Up to 200 hours runtime on set of batteries.
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the CKMA12 ARB air compressor an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
  • Boost Projects Custom Kit Includes: ARB Digital Tire Inflator & Tire Inflation Kit For Air Compressors & E-Z Deflator Kit
  • This manifold permits you to lock the front and rear air lockers without needing a compressor for each.
  • This kit includes a manifold body with mounting bracket, BSPP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit.
  • Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits.
  • Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor
  • TIRE PUMP UP KIT: For use with ARB compressor fill up deflated tires on the trail
  • EZ TIRE DEFLATOR: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate pressure reading via the simple movement of a sliding valve.
  • The ARB Air Compressor is an integral component of the air locker system. Automatic pressure activated limit switch Includes compressor, mounting hardware, pressure limit switch, wiring harness and instructions.
  • Boost Projects Custom Kit Includes: ARB Ultimate Wheeler Pack Heavy-Duty 12 VOLT Air Compressor, Pump Up Kit and E-Z Tire Deflator 4x4
  • Size: Without Hose - 8.2" L x 2.95" W x 2.95" H With Hose - 29.5" L x 2.95" W x 2.95" H
  • Technical Specifications: 1/4 NPT Female (suites ARB fittings, included) Batteries - x2 AAA (supplied) Battery Life - up to 200 hours Auto switch on and auto switch off
  • Digital Tire Inflator Specs : Large LCD Digital readouts with blue backlight, Battery indicator, Multiple measurements (Scale: 0-200 PSI / 0-14 Bar / 0-1400 KPA), Rubber bump guard to protect against drops and knocks, Coated thumb trigger, 23.5 inch dual swivel PVC coated braided hose, Push on chuck type, Accuracy to +/- 1 PSI within 25-75 PSI range, Max Supply pressure - 350 PSI, 240 KPA, Up to 200 hours runtime on set of batteries.
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the CKMA12 ARB air compressor an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
  • Boost Projects Custom Kit Includes: ARB Digital Tire Inflator & Tire Inflation Kit For Air Compressors.
  • This has British Standard Pipe Parallel (thread).
  • The Nylon 5mm line pushes into this for an easy connection of the ARB Air Locker Line or the Trail-Gear Rear disconnect.
  • ARB Replacement 5mm Push In Fitting (170201)
  • Fully geared, solid brass precision movement // Easy to read dial with 1 pressure per square inch increments // Includes protective canvas pouch and instruction sheet
  • ARB505: Corrosion resistant brass/stainless deflator tool // Quality bronze bourdon tube gauge design ensures accuracy is not affected by changes in temperature, humidity or altitude
  • Motors are internally thermal protected against extreme temperature damage // Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing
  • CKMTA12: Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM] // Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids; Not Included).
  • Compressor Mount: fits the ARB small and large compressor (not the twin). Direct bolt in using factory hardware.
  • TIRE PUMP UP KIT: For use with ARB compressor fill up deflated tires on the trail
  • EZ TIRE DEFLATOR: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate pressure reading via the simple movement of a sliding valve.
  • The ARB Air Compressor is an integral component of the air locker system. Automatic pressure activated limit switch Includes compressor, mounting hardware, pressure limit switch, wiring harness and instructions.
  • Boost Projects Custom Kit Includes: ARB Ultimate Wheeler Pack Heavy-Duty 12 VOLT Air Compressor, Pump Up Kit and E-Z Tire Deflator 4x4

More Info

ARB 171319 Air Compressor Filter Relocation Kit Incl. 1.2m Rubber Hose Filter Mounting Bracket Plated Brass Fittings All Necessary Mounting Screws Air Compressor Filter Relocation Kit

More from Automotive Parts & Accessories
Search only ARB brand name
ARB 171319 Air Compressor Filter Relocation Kit Incl. 1.2m Rubber Hose Filter Mounting Bracket Plated Brass Fittings All Necessary Mounting Screws Air Compressor Filter Relocation Kit

Current price: 39 USD


Check price and availability


Height: 6 Inches

Length: 11 Inches

Width: 11 Inches

Weight: 1.1 Pounds

  • 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
  • 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
  • E-Z DEFLATOR KIT Corrosion Resistant Brass/Stainless Deflator Tool Quality Bronze Bourdon Tube Gauge Design Ensures Accuracy is Not Affected by Changes in Temperature, Humidity or Altitude Fully Geared, Solid Brass Precision Movement Protective Rubber Gauge Guard Easy to Read Dial with One PSI Increments Thoroughly Designed and Tested to Ensure Accuracy Includes Protective Canvas Pouch and Instruction Sheet
  • Technical Specifications: 1/4 NPT Female (suites ARB fittings, included) Batteries - x2 AAA (supplied) Battery Life - up to 200 hours Auto switch on and auto switch off Size: Without Hose - 8.2" L x 2.95" W x 2.95" H With Hose - 29.5" L x 2.95" W x 2.95" H
  • Digital Tire Inflator Specs : Large LCD Digital readouts with blue backlight, Battery indicator, Multiple measurements (Scale: 0-200 PSI / 0-14 Bar / 0-1400 KPA), Rubber bump guard to protect against drops and knocks, Coated thumb trigger, 23.5 inch dual swivel PVC coated braided hose, Push on chuck type, Accuracy to +/- 1 PSI within 25-75 PSI range, Max Supply pressure - 350 PSI, 240 KPA, Up to 200 hours runtime on set of batteries.
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the CKMA12 ARB air compressor an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
  • Boost Projects Custom Kit Includes: ARB Digital Tire Inflator & Tire Inflation Kit For Air Compressors & E-Z Deflator Kit
  • This manifold permits you to lock the front and rear air lockers without needing a compressor for each.
  • This kit includes a manifold body with mounting bracket, BSPP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit.
  • Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits.
  • Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor
  • TIRE PUMP UP KIT: For use with ARB compressor fill up deflated tires on the trail
  • EZ TIRE DEFLATOR: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate pressure reading via the simple movement of a sliding valve.
  • The ARB Air Compressor is an integral component of the air locker system. Automatic pressure activated limit switch Includes compressor, mounting hardware, pressure limit switch, wiring harness and instructions.
  • Boost Projects Custom Kit Includes: ARB Ultimate Wheeler Pack Heavy-Duty 12 VOLT Air Compressor, Pump Up Kit and E-Z Tire Deflator 4x4
  • Size: Without Hose - 8.2" L x 2.95" W x 2.95" H With Hose - 29.5" L x 2.95" W x 2.95" H
  • Technical Specifications: 1/4 NPT Female (suites ARB fittings, included) Batteries - x2 AAA (supplied) Battery Life - up to 200 hours Auto switch on and auto switch off
  • Digital Tire Inflator Specs : Large LCD Digital readouts with blue backlight, Battery indicator, Multiple measurements (Scale: 0-200 PSI / 0-14 Bar / 0-1400 KPA), Rubber bump guard to protect against drops and knocks, Coated thumb trigger, 23.5 inch dual swivel PVC coated braided hose, Push on chuck type, Accuracy to +/- 1 PSI within 25-75 PSI range, Max Supply pressure - 350 PSI, 240 KPA, Up to 200 hours runtime on set of batteries.
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the CKMA12 ARB air compressor an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
  • Boost Projects Custom Kit Includes: ARB Digital Tire Inflator & Tire Inflation Kit For Air Compressors.
  • This has British Standard Pipe Parallel (thread).
  • The Nylon 5mm line pushes into this for an easy connection of the ARB Air Locker Line or the Trail-Gear Rear disconnect.
  • ARB Replacement 5mm Push In Fitting (170201)
  • Fully geared, solid brass precision movement // Easy to read dial with 1 pressure per square inch increments // Includes protective canvas pouch and instruction sheet
  • ARB505: Corrosion resistant brass/stainless deflator tool // Quality bronze bourdon tube gauge design ensures accuracy is not affected by changes in temperature, humidity or altitude
  • Motors are internally thermal protected against extreme temperature damage // Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing
  • CKMTA12: Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM] // Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids; Not Included).
  • Compressor Mount: fits the ARB small and large compressor (not the twin). Direct bolt in using factory hardware.
  • TIRE PUMP UP KIT: For use with ARB compressor fill up deflated tires on the trail
  • EZ TIRE DEFLATOR: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate pressure reading via the simple movement of a sliding valve.
  • The ARB Air Compressor is an integral component of the air locker system. Automatic pressure activated limit switch Includes compressor, mounting hardware, pressure limit switch, wiring harness and instructions.
  • Boost Projects Custom Kit Includes: ARB Ultimate Wheeler Pack Heavy-Duty 12 VOLT Air Compressor, Pump Up Kit and E-Z Tire Deflator 4x4

More Info

ARB 12 Volt High Performance Twin Air Compressor & E-Z Deflator , Airline, Tire Inflation Kit & Air Locker Manifold Kit

More from Automotive Parts & Accessories
Search only ARB brand name
ARB 12 Volt High Performance Twin Air Compressor & E-Z Deflator , Airline, Tire Inflation Kit & Air Locker Manifold Kit

Current price: 1021.92 USD


Check price and availability


Height: 20 Inches

Length: 20 Inches

Width: 10 Inches

Weight: 40 Pounds

  • 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
  • 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
  • E-Z DEFLATOR KIT Corrosion Resistant Brass/Stainless Deflator Tool Quality Bronze Bourdon Tube Gauge Design Ensures Accuracy is Not Affected by Changes in Temperature, Humidity or Altitude Fully Geared, Solid Brass Precision Movement Protective Rubber Gauge Guard Easy to Read Dial with One PSI Increments Thoroughly Designed and Tested to Ensure Accuracy Includes Protective Canvas Pouch and Instruction Sheet
  • Technical Specifications: 1/4 NPT Female (suites ARB fittings, included) Batteries - x2 AAA (supplied) Battery Life - up to 200 hours Auto switch on and auto switch off Size: Without Hose - 8.2" L x 2.95" W x 2.95" H With Hose - 29.5" L x 2.95" W x 2.95" H
  • Digital Tire Inflator Specs : Large LCD Digital readouts with blue backlight, Battery indicator, Multiple measurements (Scale: 0-200 PSI / 0-14 Bar / 0-1400 KPA), Rubber bump guard to protect against drops and knocks, Coated thumb trigger, 23.5 inch dual swivel PVC coated braided hose, Push on chuck type, Accuracy to +/- 1 PSI within 25-75 PSI range, Max Supply pressure - 350 PSI, 240 KPA, Up to 200 hours runtime on set of batteries.
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the CKMA12 ARB air compressor an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
  • Boost Projects Custom Kit Includes: ARB Digital Tire Inflator & Tire Inflation Kit For Air Compressors & E-Z Deflator Kit
  • This manifold permits you to lock the front and rear air lockers without needing a compressor for each.
  • This kit includes a manifold body with mounting bracket, BSPP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit.
  • Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits.
  • Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor
  • TIRE PUMP UP KIT: For use with ARB compressor fill up deflated tires on the trail
  • EZ TIRE DEFLATOR: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate pressure reading via the simple movement of a sliding valve.
  • The ARB Air Compressor is an integral component of the air locker system. Automatic pressure activated limit switch Includes compressor, mounting hardware, pressure limit switch, wiring harness and instructions.
  • Boost Projects Custom Kit Includes: ARB Ultimate Wheeler Pack Heavy-Duty 12 VOLT Air Compressor, Pump Up Kit and E-Z Tire Deflator 4x4
  • Size: Without Hose - 8.2" L x 2.95" W x 2.95" H With Hose - 29.5" L x 2.95" W x 2.95" H
  • Technical Specifications: 1/4 NPT Female (suites ARB fittings, included) Batteries - x2 AAA (supplied) Battery Life - up to 200 hours Auto switch on and auto switch off
  • Digital Tire Inflator Specs : Large LCD Digital readouts with blue backlight, Battery indicator, Multiple measurements (Scale: 0-200 PSI / 0-14 Bar / 0-1400 KPA), Rubber bump guard to protect against drops and knocks, Coated thumb trigger, 23.5 inch dual swivel PVC coated braided hose, Push on chuck type, Accuracy to +/- 1 PSI within 25-75 PSI range, Max Supply pressure - 350 PSI, 240 KPA, Up to 200 hours runtime on set of batteries.
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the CKMA12 ARB air compressor an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
  • Boost Projects Custom Kit Includes: ARB Digital Tire Inflator & Tire Inflation Kit For Air Compressors.
  • This has British Standard Pipe Parallel (thread).
  • The Nylon 5mm line pushes into this for an easy connection of the ARB Air Locker Line or the Trail-Gear Rear disconnect.
  • ARB Replacement 5mm Push In Fitting (170201)
  • Fully geared, solid brass precision movement // Easy to read dial with 1 pressure per square inch increments // Includes protective canvas pouch and instruction sheet
  • ARB505: Corrosion resistant brass/stainless deflator tool // Quality bronze bourdon tube gauge design ensures accuracy is not affected by changes in temperature, humidity or altitude
  • Motors are internally thermal protected against extreme temperature damage // Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing
  • CKMTA12: Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM] // Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids; Not Included).
  • Compressor Mount: fits the ARB small and large compressor (not the twin). Direct bolt in using factory hardware.
  • TIRE PUMP UP KIT: For use with ARB compressor fill up deflated tires on the trail
  • EZ TIRE DEFLATOR: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate pressure reading via the simple movement of a sliding valve.
  • The ARB Air Compressor is an integral component of the air locker system. Automatic pressure activated limit switch Includes compressor, mounting hardware, pressure limit switch, wiring harness and instructions.
  • Boost Projects Custom Kit Includes: ARB Ultimate Wheeler Pack Heavy-Duty 12 VOLT Air Compressor, Pump Up Kit and E-Z Tire Deflator 4x4
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the CKMA12 ARB air compressor an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
  • E-Z Deflator Kit: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate pressure reading via the simple movement of a sliding valve. Corrosion Resistant Brass/Stainless Deflator Tool Quality Bronze Bourdon Tube Gauge Design Ensures Accuracy is Not Affected by Changes in Temperature, Humidity or Altitude. Fully Geared, Solid Brass Precision Movement. Protective Rubber Gauge Guard.
  • Manifold Kit Includes: Manifold body with mounting bracket. 2x 1/8_ѝBSPP ports for installation of up to 2 x Air Locker solenoids. 2x 1/4_ѝ NPT ports, one to be used as an input and the second could be used for installation of a pump up kit. 1x high temperature resistant Teflon stainless steel braided hose with heavy duty JIC4 fittings. 2x JIC4 - 1/4NPT nipples. 2x M6 hex head bolt and nylon lock-nuts to secure the manifold kit.
  • Air Compressor Kit Includes: Fully assembled and tested air compressor (12V). Complete wiring loom w/ Air Locker solenoid plug-in terminals. Automotive OEM quality compressor isolating switch. 2 x relocatable splash resistant air filters with washable high-flow sintered bronze filter cartridges. Mounting bolts and washers.
  • Boost Projects Custom Kit Includes: ARB 12V High Performance Twin Air Compressor & E-Z Deflator & Airline & Tire Inflation Kit & Air Locker Manifold Kit

More Info

1    2    3    4    5    6    7    8    9    10